[PATCH v6 0/5] USB DWC3 host wake up support from system suspend

[PATCH v6 0/5] USB DWC3 host wake up support from system suspend

[Sandeep Maheswaram]

Avoiding phy powerdown in host mode when wakeup capable devices are 
connected, so that it can be wake up by devices.
Set GENPD_FLAG_ACTIVE_WAKEUP flag to keep usb30_prim gdsc active
when wakeup capable devices are connected to the host.

Changes in v6:
Addressed comments in host.c and core.c
Separated the patches in dwc3-qcom.c to make it simple.
Dropped wakeup-source change as it is not related to this series.

Changes in v5:
Added phy_power_off flag to check presence of wakeup capable devices.
Dropped patch[v4,4/5] as it is present linux-next.
Addressed comments in host.c and dwc3-qcom.c.

Changes in v4:
Addressed Matthias comments raised in v3.

Changes in v3:
Removed need_phy_for_wakeup flag and by default avoiding phy powerdown.
Addressed Matthias comments and added entry for DEV_SUPERSPEED.
Added suspend_quirk in dwc3 host and moved the dwc3_set_phy_speed_flags.
Added wakeup-source dt entry and reading in dwc-qcom.c glue driver.

Changes in v2:
Dropped the patch in clock to set GENPD_FLAG_ACTIVE_WAKEUP flag and 
setting in usb dwc3 driver.
Separated the core patch and glue driver patch.
Made need_phy_for_wakeup flag part of dwc structure and 
hs_phy_flags as unsgined int.
Adrressed the comment on device_init_wakeup call.
Corrected offset for reading portsc register.
Added pacth to support wakeup in xo shutdown case.

Sandeep Maheswaram (5):
  usb: dwc3: host: Add suspend_quirk for dwc3 host
  usb: dwc3: core: Host wake up support from system suspend
  usb: dwc3: qcom: Add helper functions to enable,disable wake irqs
  usb: dwc3: qcom: Configure wakeup interrupts during suspend
  usb: dwc3: qcom: Set genpd active wakeup flag for usb gdsc

 drivers/usb/dwc3/core.c      |  7 ++--
 drivers/usb/dwc3/core.h      |  3 ++
 drivers/usb/dwc3/dwc3-qcom.c | 85 ++++++++++++++++++++++++++++----------------
 drivers/usb/dwc3/host.c      | 59 ++++++++++++++++++++++++++++++
 4 files changed, 122 insertions(+), 32 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v6 1/5] usb: dwc3: host: Add suspend_quirk for dwc3 host

[Sandeep Maheswaram]

Adding suspend quirk function for dwc3 host which will be called
during xhci suspend.
Setting hs_phy_mode, ss_phy_mode , phy_power_off flags and phy mode
during host suspend.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
 drivers/usb/dwc3/core.h |  3 +++
 drivers/usb/dwc3/host.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 62 insertions(+)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 6e9abfb..f409dc1 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1111,6 +1111,9 @@ struct dwc3 {
 
 	bool			phys_ready;
 
+	unsigned int            hs_phy_mode;
+	bool			phy_power_off;
+
 	struct ulpi		*ulpi;
 	bool			ulpi_ready;
 
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index f29a264..527f04c 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -11,6 +11,14 @@
 #include <linux/platform_device.h>
 
 #include "core.h"
+#include "../host/xhci.h"
+#include "../host/xhci-plat.h"
+
+static int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd);
+
+static const struct xhci_plat_priv xhci_plat_dwc3_xhci = {
+	.suspend_quirk = xhci_dwc3_suspend_quirk,
+};
 
 static int dwc3_host_get_irq(struct dwc3 *dwc)
 {
@@ -115,6 +123,13 @@ int dwc3_host_init(struct dwc3 *dwc)
 		}
 	}
 
+	ret = platform_device_add_data(xhci, &xhci_plat_dwc3_xhci,
+			sizeof(struct xhci_plat_priv));
+	if (ret) {
+		dev_err(dwc->dev, "failed to add data to xHCI\n");
+		goto err;
+	}
+
 	ret = platform_device_add(xhci);
 	if (ret) {
 		dev_err(dwc->dev, "failed to register xHCI device\n");
@@ -127,6 +142,50 @@ int dwc3_host_init(struct dwc3 *dwc)
 	return ret;
 }
 
+static void dwc3_set_phy_mode(struct usb_hcd *hcd)
+{
+
+	int i, num_ports;
+	u32 reg;
+	unsigned int ss_phy_mode = 0;
+	struct dwc3 *dwc = dev_get_drvdata(hcd->self.controller->parent);
+	struct xhci_hcd	*xhci_hcd = hcd_to_xhci(hcd);
+
+	dwc->hs_phy_mode = 0;
+
+	reg = readl(&xhci_hcd->cap_regs->hcs_params1);
+	num_ports = HCS_MAX_PORTS(reg);
+
+	for (i = 0; i < num_ports; i++) {
+		reg = readl(&xhci_hcd->op_regs->port_status_base + i * 0x04);
+		if (reg & PORT_PE) {
+			if (DEV_HIGHSPEED(reg) || DEV_FULLSPEED(reg))
+				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_HS;
+			else if (DEV_LOWSPEED(reg))
+				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_LS;
+
+			if (DEV_SUPERSPEED(reg))
+				ss_phy_mode |= PHY_MODE_USB_HOST_SS;
+		}
+	}
+	phy_set_mode(dwc->usb2_generic_phy, dwc->hs_phy_mode);
+	phy_set_mode(dwc->usb3_generic_phy, ss_phy_mode);
+}
+
+int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd)
+{
+	struct dwc3 *dwc = dev_get_drvdata(hcd->self.controller->parent);
+
+	dwc3_set_phy_mode(hcd);
+
+	if (usb_wakeup_enabled_descendants(hcd->self.root_hub))
+		dwc->phy_power_off = false;
+	else
+		dwc->phy_power_off = true;
+
+	return 0;
+}
+
 void dwc3_host_exit(struct dwc3 *dwc)
 {
 	platform_device_unregister(dwc->xhci);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v6 2/5] usb: dwc3: core: Host wake up support from system suspend

[Sandeep Maheswaram]

Avoiding phy powerdown when wakeup capable devices are connected
by checking phy_power_off flag.
Phy should be on to wake up the device from suspend using wakeup capable
devices such as keyboard and mouse.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
 drivers/usb/dwc3/core.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 05e2e54c..3b88c62 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1701,7 +1701,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 		dwc3_core_exit(dwc);
 		break;
 	case DWC3_GCTL_PRTCAP_HOST:
-		if (!PMSG_IS_AUTO(msg)) {
+		if (!PMSG_IS_AUTO(msg) && dwc->phy_power_off) {
 			dwc3_core_exit(dwc);
 			break;
 		}
@@ -1762,13 +1762,16 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
 		spin_unlock_irqrestore(&dwc->lock, flags);
 		break;
 	case DWC3_GCTL_PRTCAP_HOST:
-		if (!PMSG_IS_AUTO(msg)) {
+		if (!PMSG_IS_AUTO(msg) && dwc->phy_power_off) {
 			ret = dwc3_core_init_for_resume(dwc);
 			if (ret)
 				return ret;
 			dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
 			break;
+		} else {
+			dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
 		}
+
 		/* Restore GUSB2PHYCFG bits that were modified in suspend */
 		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
 		if (dwc->dis_u2_susphy_quirk)
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v6 3/5] usb: dwc3: qcom: Add helper functions to enable,disable wake irqs

[Sandeep Maheswaram]

Adding helper functions to enable,disable wake irqs to make
the code simple and readable.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
 drivers/usb/dwc3/dwc3-qcom.c | 58 ++++++++++++++++++++------------------------
 1 file changed, 26 insertions(+), 32 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 49e6ca9..66183c6 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -296,50 +296,44 @@ static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom)
 	icc_put(qcom->icc_path_apps);
 }
 
+static void dwc3_qcom_enable_wakeup_irq(int irq)
+{
+	if (!irq)
+		return;
+
+	enable_irq(irq);
+	enable_irq_wake(irq);
+}
+
+static void dwc3_qcom_disable_wakeup_irq(int irq)
+{
+	if (!irq)
+		return;
+
+	disable_irq_wake(irq);
+	disable_irq_nosync(irq);
+}
+
 static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
 {
-	if (qcom->hs_phy_irq) {
-		disable_irq_wake(qcom->hs_phy_irq);
-		disable_irq_nosync(qcom->hs_phy_irq);
-	}
+	dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
 
-	if (qcom->dp_hs_phy_irq) {
-		disable_irq_wake(qcom->dp_hs_phy_irq);
-		disable_irq_nosync(qcom->dp_hs_phy_irq);
-	}
+	dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
 
-	if (qcom->dm_hs_phy_irq) {
-		disable_irq_wake(qcom->dm_hs_phy_irq);
-		disable_irq_nosync(qcom->dm_hs_phy_irq);
-	}
+	dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
 
-	if (qcom->ss_phy_irq) {
-		disable_irq_wake(qcom->ss_phy_irq);
-		disable_irq_nosync(qcom->ss_phy_irq);
-	}
+	dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq);
 }
 
 static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
 {
-	if (qcom->hs_phy_irq) {
-		enable_irq(qcom->hs_phy_irq);
-		enable_irq_wake(qcom->hs_phy_irq);
-	}
+	dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq);
 
-	if (qcom->dp_hs_phy_irq) {
-		enable_irq(qcom->dp_hs_phy_irq);
-		enable_irq_wake(qcom->dp_hs_phy_irq);
-	}
+	dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq);
 
-	if (qcom->dm_hs_phy_irq) {
-		enable_irq(qcom->dm_hs_phy_irq);
-		enable_irq_wake(qcom->dm_hs_phy_irq);
-	}
+	dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq);
 
-	if (qcom->ss_phy_irq) {
-		enable_irq(qcom->ss_phy_irq);
-		enable_irq_wake(qcom->ss_phy_irq);
-	}
+	dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq);
 }
 
 static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v6 4/5] usb: dwc3: qcom: Configure wakeup interrupts during suspend

[Sandeep Maheswaram]

Configure interrupts based on hs_phy_mode to avoid triggering of
interrupts during system suspend and suspend the device successfully.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
 drivers/usb/dwc3/dwc3-qcom.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 66183c6..b1e9061 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -316,22 +316,36 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
 
 static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
 {
-	dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
 
-	dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+	dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
 
-	dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+	if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_LS)
+		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+	else if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_HS)
+		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+	else {
+		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+	}
 
 	dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq);
 }
 
 static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
 {
-	dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq);
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
 
-	dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq);
+	dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq);
 
-	dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq);
+	if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_LS)
+		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq);
+	else if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_HS)
+		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq);
+	else {
+		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq);
+		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq);
+	}
 
 	dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq);
 }
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v6 5/5] usb: dwc3: qcom: Set genpd active wakeup flag for usb gdsc

[Sandeep Maheswaram]

Set genpd active wakeup flag for usb gdsc if wakeup capable devices
are connected so that wake up happens without reenumeration.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
 drivers/usb/dwc3/dwc3-qcom.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index b1e9061..b61dc0b 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -17,9 +17,11 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
+#include <linux/pm_domain.h>
 #include <linux/usb/of.h>
 #include <linux/reset.h>
 #include <linux/iopoll.h>
+#include <linux/usb/hcd.h>
 
 #include "core.h"
 
@@ -354,10 +356,19 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
 {
 	u32 val;
 	int i, ret;
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
+	struct usb_hcd  *hcd;
+	struct generic_pm_domain *genpd = pd_to_genpd(qcom->dev->pm_domain);
 
 	if (qcom->is_suspended)
 		return 0;
 
+	if (dwc->xhci) {
+		hcd = platform_get_drvdata(dwc->xhci);
+		if (usb_wakeup_enabled_descendants(hcd->self.root_hub))
+			genpd->flags |= GENPD_FLAG_ACTIVE_WAKEUP;
+	}
+
 	val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
 	if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
 		dev_err(qcom->dev, "HS-PHY not in L2\n");
@@ -382,9 +393,15 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
 	int ret;
 	int i;
 
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
+	struct generic_pm_domain *genpd = pd_to_genpd(qcom->dev->pm_domain);
+
 	if (!qcom->is_suspended)
 		return 0;
 
+	if (dwc->xhci)
+		genpd->flags &= ~GENPD_FLAG_ACTIVE_WAKEUP;
+
 	if (device_may_wakeup(qcom->dev))
 		dwc3_qcom_disable_interrupts(qcom);
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH v6 3/5] usb: dwc3: qcom: Add helper functions to enable,disable wake irqs

[Matthias Kaehlcke]

On Fri, Apr 16, 2021 at 03:31:51PM +0530, Sandeep Maheswaram wrote:
> Adding helper functions to enable,disable wake irqs to make
> the code simple and readable.
> 
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

Re: [PATCH v6 1/5] usb: dwc3: host: Add suspend_quirk for dwc3 host

[Matthias Kaehlcke]

On Fri, Apr 16, 2021 at 03:31:49PM +0530, Sandeep Maheswaram wrote:

> Subject: usb: dwc3: host: Add suspend_quirk for dwc3 host
>
> Adding suspend quirk function for dwc3 host which will be called
> during xhci suspend.
> Setting hs_phy_mode, ss_phy_mode , phy_power_off flags and phy mode
> during host suspend.

This describes in other words what the code already tells us, but
doesn't really explain why this change is needed.

An attempt to be a bit clearer:

  Subject: usb: dwc3: host: Set PHY mode during suspend

  During suspend read the status of all port and make sure the PHYs
  are in the correct mode (mka@: why is it necessary to call
  phy_set_mode(), shouldn't the PHYs already be in the correct mode
  if they are operational?). Keep track of the mode of the HS PHY to
  be able to configure wakeup properly.

  Also check during suspend if any wakeup capable devices are
  connected to the controller (directly or through hubs), if there
  are none set a flag to indicate that the PHY should be powered
  down during suspend.

Just a starting point, I'm sure it has room for improvement.

> 
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> ---
>  drivers/usb/dwc3/core.h |  3 +++
>  drivers/usb/dwc3/host.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 62 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 6e9abfb..f409dc1 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -1111,6 +1111,9 @@ struct dwc3 {
>  
>  	bool			phys_ready;
>  
> +	unsigned int            hs_phy_mode;
> +	bool			phy_power_off;
> +
>  	struct ulpi		*ulpi;
>  	bool			ulpi_ready;
>  
> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
> index f29a264..527f04c 100644
> --- a/drivers/usb/dwc3/host.c
> +++ b/drivers/usb/dwc3/host.c
> @@ -11,6 +11,14 @@
>  #include <linux/platform_device.h>
>  
>  #include "core.h"
> +#include "../host/xhci.h"
> +#include "../host/xhci-plat.h"
> +
> +static int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd);
> +
> +static const struct xhci_plat_priv xhci_plat_dwc3_xhci = {
> +	.suspend_quirk = xhci_dwc3_suspend_quirk,
> +};
>  
>  static int dwc3_host_get_irq(struct dwc3 *dwc)
>  {
> @@ -115,6 +123,13 @@ int dwc3_host_init(struct dwc3 *dwc)
>  		}
>  	}
>  
> +	ret = platform_device_add_data(xhci, &xhci_plat_dwc3_xhci,
> +			sizeof(struct xhci_plat_priv));
> +	if (ret) {
> +		dev_err(dwc->dev, "failed to add data to xHCI\n");
> +		goto err;
> +	}
> +
>  	ret = platform_device_add(xhci);
>  	if (ret) {
>  		dev_err(dwc->dev, "failed to register xHCI device\n");
> @@ -127,6 +142,50 @@ int dwc3_host_init(struct dwc3 *dwc)
>  	return ret;
>  }
>  
> +static void dwc3_set_phy_mode(struct usb_hcd *hcd)
> +{
> +
> +	int i, num_ports;
> +	u32 reg;
> +	unsigned int ss_phy_mode = 0;
> +	struct dwc3 *dwc = dev_get_drvdata(hcd->self.controller->parent);
> +	struct xhci_hcd	*xhci_hcd = hcd_to_xhci(hcd);
> +
> +	dwc->hs_phy_mode = 0;
> +
> +	reg = readl(&xhci_hcd->cap_regs->hcs_params1);
> +	num_ports = HCS_MAX_PORTS(reg);
> +
> +	for (i = 0; i < num_ports; i++) {
> +		reg = readl(&xhci_hcd->op_regs->port_status_base + i * 0x04);
> +		if (reg & PORT_PE) {
> +			if (DEV_HIGHSPEED(reg) || DEV_FULLSPEED(reg))
> +				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_HS;
> +			else if (DEV_LOWSPEED(reg))
> +				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_LS;
> +
> +			if (DEV_SUPERSPEED(reg))
> +				ss_phy_mode |= PHY_MODE_USB_HOST_SS;
> +		}
> +	}
> +	phy_set_mode(dwc->usb2_generic_phy, dwc->hs_phy_mode);
> +	phy_set_mode(dwc->usb3_generic_phy, ss_phy_mode);
> +}
> +
> +int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd)
> +{
> +	struct dwc3 *dwc = dev_get_drvdata(hcd->self.controller->parent);
> +
> +	dwc3_set_phy_mode(hcd);
> +
> +	if (usb_wakeup_enabled_descendants(hcd->self.root_hub))
> +		dwc->phy_power_off = false;
> +	else
> +		dwc->phy_power_off = true;
> +
> +	return 0;
> +}
> +
>  void dwc3_host_exit(struct dwc3 *dwc)
>  {
>  	platform_device_unregister(dwc->xhci);
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 

Re: [PATCH v6 2/5] usb: dwc3: core: Host wake up support from system suspend

[Matthias Kaehlcke]

On Fri, Apr 16, 2021 at 03:31:50PM +0530, Sandeep Maheswaram wrote:
> Avoiding phy powerdown when wakeup capable devices are connected
> by checking phy_power_off flag.
> Phy should be on to wake up the device from suspend using wakeup capable
> devices such as keyboard and mouse.
> 
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

Re: [PATCH v6 4/5] usb: dwc3: qcom: Configure wakeup interrupts during suspend

[Matthias Kaehlcke]

On Fri, Apr 16, 2021 at 03:31:52PM +0530, Sandeep Maheswaram wrote:
> Configure interrupts based on hs_phy_mode to avoid triggering of
> interrupts during system suspend and suspend the device successfully.
> 
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 26 ++++++++++++++++++++------
>  1 file changed, 20 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 66183c6..b1e9061 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -316,22 +316,36 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
>  
>  static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
>  {
> -	dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
> +	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
>  
> -	dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
> +	dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
>  
> -	dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
> +	if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_LS)
> +		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
> +	else if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_HS)
> +		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
> +	else {
> +		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
> +		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
> +	}

nit: 'if' and 'else if' branches should also have curly braces since
'else' has them.

>  	dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq);
>  }
>  
>  static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
>  {
> -	dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq);
> +	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
>  
> -	dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq);
> +	dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq);
>  
> -	dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq);
> +	if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_LS)
> +		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq);
> +	else if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_HS)
> +		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq);
> +	else {
> +		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq);
> +		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq);
> +	}

ditto

>  	dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq);
>  }

Other than the nits:

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

Re: [PATCH v6 5/5] usb: dwc3: qcom: Set genpd active wakeup flag for usb gdsc

[Matthias Kaehlcke]

On Fri, Apr 16, 2021 at 03:31:53PM +0530, Sandeep Maheswaram wrote:

> Subject: usb: dwc3: qcom: Set genpd active wakeup flag for usb gdsc
>
> Set genpd active wakeup flag for usb gdsc if wakeup capable devices
> are connected so that wake up happens without reenumeration.

Better describe things are a higher level, rather than getting into
the details of how you achieve it. That's what the code is for.

e.g.:

Subject: usb: dwc3: qcom: Keep power domain on to support wakeup

If wakeup capable devices are connected to the controller (directly
or through hubs) at suspend time keep the power domain on in order
to support wakeup from these devices.