* [PATCH] pinctrl: qcom: sc7280: Add GPIO wakeup interrupt map @ 2021-02-12 4:59 Rajendra Nayak 2021-02-22 16:43 ` Bjorn Andersson ` (2 more replies) 0 siblings, 3 replies; 4+ messages in thread From: Rajendra Nayak @ 2021-02-12 4:59 UTC (permalink / raw) To: agross, bjorn.andersson, linus.walleij Cc: linux-arm-msm, linux-gpio, linux-kernel, Maulik Shah, Rajendra Nayak From: Maulik Shah <mkshah@codeaurora.org> GPIOs that can be configured as wakeup sources, have their interrupt lines routed to PDC interrupt controller. Provide the interrupt map of the GPIO to its wakeup capable interrupt parent. Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> --- drivers/pinctrl/qcom/pinctrl-sc7280.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280.c b/drivers/pinctrl/qcom/pinctrl-sc7280.c index 8daccd5..99c416e 100644 --- a/drivers/pinctrl/qcom/pinctrl-sc7280.c +++ b/drivers/pinctrl/qcom/pinctrl-sc7280.c @@ -1449,6 +1449,28 @@ static const struct msm_pingroup sc7280_groups[] = { [182] = SDC_QDSD_PINGROUP(sdc2_data, 0x1b4000, 9, 0), }; +static const struct msm_gpio_wakeirq_map sc7280_pdc_map[] = { + { 0, 134 }, { 3, 131 }, { 4, 121 }, { 7, 103 }, { 8, 155 }, + { 11, 93 }, { 12, 78 }, { 15, 79 }, { 16, 80 }, { 18, 81 }, + { 19, 107 }, { 20, 82 }, { 21, 83 }, { 23, 99 }, { 24, 86 }, + { 25, 95 }, { 27, 158 }, { 28, 159 }, { 31, 90 }, { 32, 144 }, + { 34, 77 }, { 35, 92 }, { 36, 157 }, { 39, 73 }, { 40, 97 }, + { 41, 98 }, { 43, 85 }, { 44, 100 }, { 45, 101 }, { 47, 102 }, + { 48, 74 }, { 51, 112 }, { 52, 156 }, { 54, 117 }, { 55, 84 }, + { 56, 108 }, { 59, 110 }, { 60, 111 }, { 61, 123 }, { 63, 104 }, + { 68, 127 }, { 72, 150 }, { 75, 133 }, { 77, 125 }, { 78, 105 }, + { 79, 106 }, { 80, 118 }, { 81, 119 }, { 82, 162 }, { 83, 122 }, + { 86, 75 }, { 88, 154 }, { 89, 124 }, { 90, 149 }, { 91, 76 }, + { 93, 128 }, { 95, 160 }, { 101, 126 }, { 102, 96 }, { 103, 116 }, + { 104, 114 }, { 112, 72 }, { 116, 135 }, { 117, 163 }, { 119, 137 }, + { 121, 138 }, { 123, 139 }, { 125, 140 }, { 127, 141 }, { 128, 165 }, + { 129, 143 }, { 130, 94 }, { 131, 145 }, { 133, 146 }, { 136, 147 }, + { 140, 148 }, { 141, 115 }, { 142, 113 }, { 145, 130 }, { 148, 132 }, + { 150, 87 }, { 151, 88 }, { 153, 89 }, { 155, 164 }, { 156, 129 }, + { 157, 161 }, { 158, 120 }, { 161, 136 }, { 163, 142 }, { 172, 166 }, + { 174, 167 }, +}; + static const struct msm_pinctrl_soc_data sc7280_pinctrl = { .pins = sc7280_pins, .npins = ARRAY_SIZE(sc7280_pins), @@ -1457,6 +1479,8 @@ static const struct msm_pinctrl_soc_data sc7280_pinctrl = { .groups = sc7280_groups, .ngroups = ARRAY_SIZE(sc7280_groups), .ngpios = 176, + .wakeirq_map = sc7280_pdc_map, + .nwakeirq_map = ARRAY_SIZE(sc7280_pdc_map), }; static int sc7280_pinctrl_probe(struct platform_device *pdev) -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] pinctrl: qcom: sc7280: Add GPIO wakeup interrupt map 2021-02-12 4:59 [PATCH] pinctrl: qcom: sc7280: Add GPIO wakeup interrupt map Rajendra Nayak @ 2021-02-22 16:43 ` Bjorn Andersson 2021-03-02 13:16 ` Linus Walleij 2021-05-26 19:03 ` patchwork-bot+linux-arm-msm 2 siblings, 0 replies; 4+ messages in thread From: Bjorn Andersson @ 2021-02-22 16:43 UTC (permalink / raw) To: Rajendra Nayak Cc: agross, linus.walleij, linux-arm-msm, linux-gpio, linux-kernel, Maulik Shah On Thu 11 Feb 22:59 CST 2021, Rajendra Nayak wrote: > From: Maulik Shah <mkshah@codeaurora.org> > > GPIOs that can be configured as wakeup sources, have their > interrupt lines routed to PDC interrupt controller. > > Provide the interrupt map of the GPIO to its wakeup capable > interrupt parent. > Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > Signed-off-by: Maulik Shah <mkshah@codeaurora.org> > Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> > --- > drivers/pinctrl/qcom/pinctrl-sc7280.c | 24 ++++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280.c b/drivers/pinctrl/qcom/pinctrl-sc7280.c > index 8daccd5..99c416e 100644 > --- a/drivers/pinctrl/qcom/pinctrl-sc7280.c > +++ b/drivers/pinctrl/qcom/pinctrl-sc7280.c > @@ -1449,6 +1449,28 @@ static const struct msm_pingroup sc7280_groups[] = { > [182] = SDC_QDSD_PINGROUP(sdc2_data, 0x1b4000, 9, 0), > }; > > +static const struct msm_gpio_wakeirq_map sc7280_pdc_map[] = { > + { 0, 134 }, { 3, 131 }, { 4, 121 }, { 7, 103 }, { 8, 155 }, > + { 11, 93 }, { 12, 78 }, { 15, 79 }, { 16, 80 }, { 18, 81 }, > + { 19, 107 }, { 20, 82 }, { 21, 83 }, { 23, 99 }, { 24, 86 }, > + { 25, 95 }, { 27, 158 }, { 28, 159 }, { 31, 90 }, { 32, 144 }, > + { 34, 77 }, { 35, 92 }, { 36, 157 }, { 39, 73 }, { 40, 97 }, > + { 41, 98 }, { 43, 85 }, { 44, 100 }, { 45, 101 }, { 47, 102 }, > + { 48, 74 }, { 51, 112 }, { 52, 156 }, { 54, 117 }, { 55, 84 }, > + { 56, 108 }, { 59, 110 }, { 60, 111 }, { 61, 123 }, { 63, 104 }, > + { 68, 127 }, { 72, 150 }, { 75, 133 }, { 77, 125 }, { 78, 105 }, > + { 79, 106 }, { 80, 118 }, { 81, 119 }, { 82, 162 }, { 83, 122 }, > + { 86, 75 }, { 88, 154 }, { 89, 124 }, { 90, 149 }, { 91, 76 }, > + { 93, 128 }, { 95, 160 }, { 101, 126 }, { 102, 96 }, { 103, 116 }, > + { 104, 114 }, { 112, 72 }, { 116, 135 }, { 117, 163 }, { 119, 137 }, > + { 121, 138 }, { 123, 139 }, { 125, 140 }, { 127, 141 }, { 128, 165 }, > + { 129, 143 }, { 130, 94 }, { 131, 145 }, { 133, 146 }, { 136, 147 }, > + { 140, 148 }, { 141, 115 }, { 142, 113 }, { 145, 130 }, { 148, 132 }, > + { 150, 87 }, { 151, 88 }, { 153, 89 }, { 155, 164 }, { 156, 129 }, > + { 157, 161 }, { 158, 120 }, { 161, 136 }, { 163, 142 }, { 172, 166 }, > + { 174, 167 }, > +}; > + > static const struct msm_pinctrl_soc_data sc7280_pinctrl = { > .pins = sc7280_pins, > .npins = ARRAY_SIZE(sc7280_pins), > @@ -1457,6 +1479,8 @@ static const struct msm_pinctrl_soc_data sc7280_pinctrl = { > .groups = sc7280_groups, > .ngroups = ARRAY_SIZE(sc7280_groups), > .ngpios = 176, > + .wakeirq_map = sc7280_pdc_map, > + .nwakeirq_map = ARRAY_SIZE(sc7280_pdc_map), > }; > > static int sc7280_pinctrl_probe(struct platform_device *pdev) > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] pinctrl: qcom: sc7280: Add GPIO wakeup interrupt map 2021-02-12 4:59 [PATCH] pinctrl: qcom: sc7280: Add GPIO wakeup interrupt map Rajendra Nayak 2021-02-22 16:43 ` Bjorn Andersson @ 2021-03-02 13:16 ` Linus Walleij 2021-05-26 19:03 ` patchwork-bot+linux-arm-msm 2 siblings, 0 replies; 4+ messages in thread From: Linus Walleij @ 2021-03-02 13:16 UTC (permalink / raw) To: Rajendra Nayak Cc: Andy Gross, Bjorn Andersson, MSM, open list:GPIO SUBSYSTEM, linux-kernel, Maulik Shah On Fri, Feb 12, 2021 at 6:00 AM Rajendra Nayak <rnayak@codeaurora.org> wrote: > From: Maulik Shah <mkshah@codeaurora.org> > > GPIOs that can be configured as wakeup sources, have their > interrupt lines routed to PDC interrupt controller. > > Provide the interrupt map of the GPIO to its wakeup capable > interrupt parent. > > Signed-off-by: Maulik Shah <mkshah@codeaurora.org> > Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Patch applied. Yours, Linus Walleij ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] pinctrl: qcom: sc7280: Add GPIO wakeup interrupt map 2021-02-12 4:59 [PATCH] pinctrl: qcom: sc7280: Add GPIO wakeup interrupt map Rajendra Nayak 2021-02-22 16:43 ` Bjorn Andersson 2021-03-02 13:16 ` Linus Walleij @ 2021-05-26 19:03 ` patchwork-bot+linux-arm-msm 2 siblings, 0 replies; 4+ messages in thread From: patchwork-bot+linux-arm-msm @ 2021-05-26 19:03 UTC (permalink / raw) To: Rajendra Nayak; +Cc: linux-arm-msm Hello: This patch was applied to qcom/linux.git (refs/heads/for-next): On Fri, 12 Feb 2021 10:29:34 +0530 you wrote: > From: Maulik Shah <mkshah@codeaurora.org> > > GPIOs that can be configured as wakeup sources, have their > interrupt lines routed to PDC interrupt controller. > > Provide the interrupt map of the GPIO to its wakeup capable > interrupt parent. > > [...] Here is the summary with links: - pinctrl: qcom: sc7280: Add GPIO wakeup interrupt map https://git.kernel.org/qcom/c/35b25fd32b5f You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-05-26 19:03 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-02-12 4:59 [PATCH] pinctrl: qcom: sc7280: Add GPIO wakeup interrupt map Rajendra Nayak 2021-02-22 16:43 ` Bjorn Andersson 2021-03-02 13:16 ` Linus Walleij 2021-05-26 19:03 ` patchwork-bot+linux-arm-msm
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).