* [PATCH v2] Bluetooth: btqca: sequential validation
@ 2021-12-09 6:47 Sai Teja Aluvala
2021-12-09 10:45 ` Marcel Holtmann
0 siblings, 1 reply; 3+ messages in thread
From: Sai Teja Aluvala @ 2021-12-09 6:47 UTC (permalink / raw)
To: marcel, johan.hedberg
Cc: mka, linux-kernel, linux-bluetooth, quic_hemantg, linux-arm-msm,
quic_bgodavar, rjliao, hbandi, abhishekpandit, mcchou,
quic_pharish, Sai Teja Aluvala
This change will have sequential validation support
& patch config command is added
Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com>
---
drivers/bluetooth/btqca.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/bluetooth/btqca.h | 2 ++
2 files changed, 52 insertions(+)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index be04d74..633a24c 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -141,6 +141,53 @@ static int qca_read_fw_build_info(struct hci_dev *hdev)
return err;
}
+static int qca_send_patch_config_cmd(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+ int err = 0;
+ u8 cmd[] = {EDL_PATCH_CONFIG_CMD, 0x01, 0, 0, 0};
+ u8 rlen = 0x02;
+ struct edl_event_hdr *edl;
+ u8 rtype = EDL_PATCH_CONFIG_CMD;
+
+ bt_dev_dbg(hdev, "QCA Patch config");
+
+ skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, sizeof(cmd),
+ cmd, HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "Sending QCA Patch config failed (%d)", err);
+ return err;
+ }
+
+ if (skb->len != rlen) {
+ bt_dev_err(hdev, "QCA Patch config cmd size mismatch len %d", skb->len);
+ err = -EILSEQ;
+ goto out;
+ }
+
+ edl = (struct edl_event_hdr *)(skb->data);
+ if (!edl) {
+ bt_dev_err(hdev, "QCA Patch config with no header");
+ err = -EILSEQ;
+ goto out;
+ }
+
+ if (edl->cresp != EDL_PATCH_CONFIG_RES_EVT || edl->rtype != rtype) {
+ bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
+ edl->rtype);
+ err = -EIO;
+ goto out;
+ }
+
+out:
+ kfree(skb);
+ if (err)
+ bt_dev_err(hdev, "QCA Patch config cmd failed (%d)", err);
+
+ return err;
+}
+
static int qca_send_reset(struct hci_dev *hdev)
{
struct sk_buff *skb;
@@ -551,6 +598,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
*/
rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | (soc_ver & 0x0000000f);
+ if (soc_type == QCA_WCN6750)
+ qca_send_patch_config_cmd(hdev);
+
/* Download rampatch file */
config.type = TLV_TYPE_PATCH;
if (qca_is_wcn399x(soc_type)) {
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 30afa77..61e9a50 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -13,6 +13,7 @@
#define EDL_PATCH_TLV_REQ_CMD (0x1E)
#define EDL_GET_BUILD_INFO_CMD (0x20)
#define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
+#define EDL_PATCH_CONFIG_CMD (0x28)
#define MAX_SIZE_PER_TLV_SEGMENT (243)
#define QCA_PRE_SHUTDOWN_CMD (0xFC08)
#define QCA_DISABLE_LOGGING (0xFC17)
@@ -24,6 +25,7 @@
#define EDL_CMD_EXE_STATUS_EVT (0x00)
#define EDL_SET_BAUDRATE_RSP_EVT (0x92)
#define EDL_NVM_ACCESS_CODE_EVT (0x0B)
+#define EDL_PATCH_CONFIG_RES_EVT (0x00)
#define QCA_DISABLE_LOGGING_SUB_OP (0x14)
#define EDL_TAG_ID_HCI (17)
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc.
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH v2] Bluetooth: btqca: sequential validation
2021-12-09 6:47 [PATCH v2] Bluetooth: btqca: sequential validation Sai Teja Aluvala
@ 2021-12-09 10:45 ` Marcel Holtmann
2021-12-15 11:28 ` Sai Teja Aluvala (Temp) (QUIC)
0 siblings, 1 reply; 3+ messages in thread
From: Marcel Holtmann @ 2021-12-09 10:45 UTC (permalink / raw)
To: Sai Teja Aluvala
Cc: Johan Hedberg, Matthias Kaehlcke, Linux Kernel Mailing List,
linux-bluetooth, quic_hemantg, MSM, quic_bgodavar, Rocky Liao,
hbandi, Abhishek Pandit-Subedi, Miao-chen Chou, quic_pharish
Hi Sai,
> This change will have sequential validation support
> & patch config command is added
>
> Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com>
> ---
> drivers/bluetooth/btqca.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++
> drivers/bluetooth/btqca.h | 2 ++
> 2 files changed, 52 insertions(+)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index be04d74..633a24c 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -141,6 +141,53 @@ static int qca_read_fw_build_info(struct hci_dev *hdev)
> return err;
> }
>
> +static int qca_send_patch_config_cmd(struct hci_dev *hdev)
> +{
> + struct sk_buff *skb;
> + int err = 0;
> + u8 cmd[] = {EDL_PATCH_CONFIG_CMD, 0x01, 0, 0, 0};
is there are reason not to address review comments?
const u8 cmd[] = { EDL_PATCH_CONFIG_CMD, 0x01, 0, 0, 0 };
> + u8 rlen = 0x02;
> + struct edl_event_hdr *edl;
> + u8 rtype = EDL_PATCH_CONFIG_CMD;
I missed these two and must have assumed there are used somewhere, rlen and rtype are a waste to be declared.
> +
> + bt_dev_dbg(hdev, "QCA Patch config");
> +
> + skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, sizeof(cmd),
> + cmd, HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
> + if (IS_ERR(skb)) {
> + err = PTR_ERR(skb);
> + bt_dev_err(hdev, "Sending QCA Patch config failed (%d)", err);
> + return err;
> + }
> +
> + if (skb->len != rlen) {
if (skb->len != 2) {
> + bt_dev_err(hdev, "QCA Patch config cmd size mismatch len %d", skb->len);
> + err = -EILSEQ;
> + goto out;
> + }
> +
> + edl = (struct edl_event_hdr *)(skb->data);
> + if (!edl) {
> + bt_dev_err(hdev, "QCA Patch config with no header");
> + err = -EILSEQ;
> + goto out;
> + }
> +
> + if (edl->cresp != EDL_PATCH_CONFIG_RES_EVT || edl->rtype != rtype) {
edl->rtype != EDL_PATCH_CONFIG_CMD) {
> + bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
> + edl->rtype);
> + err = -EIO;
> + goto out;
> + }
> +
> +out:
> + kfree(skb);
> + if (err)
> + bt_dev_err(hdev, "QCA Patch config cmd failed (%d)", err);
> +
> + return err;
> +}
> +
Regards
Marcel
^ permalink raw reply [flat|nested] 3+ messages in thread* RE: [PATCH v2] Bluetooth: btqca: sequential validation
2021-12-09 10:45 ` Marcel Holtmann
@ 2021-12-15 11:28 ` Sai Teja Aluvala (Temp) (QUIC)
0 siblings, 0 replies; 3+ messages in thread
From: Sai Teja Aluvala (Temp) (QUIC) @ 2021-12-15 11:28 UTC (permalink / raw)
To: Marcel Holtmann, Sai Teja Aluvala (Temp) (QUIC)
Cc: Johan Hedberg, Matthias Kaehlcke, Linux Kernel Mailing List,
linux-bluetooth, Hemant Gupta (QUIC),
MSM, quic_bgodavar, Rocky Liao, hbandi, Abhishek Pandit-Subedi,
Miao-chen Chou, PANICKER HARISH (Temp) (QUIC)
-----Original Message-----
From: Marcel Holtmann <marcel@holtmann.org>
Sent: Thursday, December 9, 2021 4:15 PM
To: Sai Teja Aluvala (Temp) (QUIC) <quic_saluvala@quicinc.com>
Cc: Johan Hedberg <johan.hedberg@gmail.com>; Matthias Kaehlcke <mka@chromium.org>; Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; linux-bluetooth <linux-bluetooth@vger.kernel.org>; Hemant Gupta (QUIC) <quic_hemantg@quicinc.com>; MSM <linux-arm-msm@vger.kernel.org>; quic_bgodavar <quic_bgodavar@quicinc.com>; Rocky Liao <rjliao@codeaurora.org>; hbandi@codeaurora.org; Abhishek Pandit-Subedi <abhishekpandit@chromium.org>; Miao-chen Chou <mcchou@chromium.org>; PANICKER HARISH (Temp) (QUIC) <quic_pharish@quicinc.com>
Subject: Re: [PATCH v2] Bluetooth: btqca: sequential validation
Hi Sai,
> This change will have sequential validation support & patch config
> command is added
>
> Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com>
> ---
> drivers/bluetooth/btqca.c | 50
> +++++++++++++++++++++++++++++++++++++++++++++++
> drivers/bluetooth/btqca.h | 2 ++
> 2 files changed, 52 insertions(+)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index be04d74..633a24c 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -141,6 +141,53 @@ static int qca_read_fw_build_info(struct hci_dev *hdev)
> return err;
> }
>
> +static int qca_send_patch_config_cmd(struct hci_dev *hdev) {
> + struct sk_buff *skb;
> + int err = 0;
> + u8 cmd[] = {EDL_PATCH_CONFIG_CMD, 0x01, 0, 0, 0};
is there are reason not to address review comments?
[Sai] : I will address in next patch
const u8 cmd[] = { EDL_PATCH_CONFIG_CMD, 0x01, 0, 0, 0 };
> + u8 rlen = 0x02;
> + struct edl_event_hdr *edl;
> + u8 rtype = EDL_PATCH_CONFIG_CMD;
I missed these two and must have assumed there are used somewhere, rlen and rtype are a waste to be declared.
[Sai] : I will delete rlen in next patch.
> +
> + bt_dev_dbg(hdev, "QCA Patch config");
> +
> + skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, sizeof(cmd),
> + cmd, HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
> + if (IS_ERR(skb)) {
> + err = PTR_ERR(skb);
> + bt_dev_err(hdev, "Sending QCA Patch config failed (%d)", err);
> + return err;
> + }
> +
> + if (skb->len != rlen) {
if (skb->len != 2) {
> + bt_dev_err(hdev, "QCA Patch config cmd size mismatch len %d", skb->len);
> + err = -EILSEQ;
> + goto out;
> + }
> +
> + edl = (struct edl_event_hdr *)(skb->data);
> + if (!edl) {
> + bt_dev_err(hdev, "QCA Patch config with no header");
> + err = -EILSEQ;
> + goto out;
> + }
> +
> + if (edl->cresp != EDL_PATCH_CONFIG_RES_EVT || edl->rtype != rtype) {
edl->rtype != EDL_PATCH_CONFIG_CMD) {
[Sai] : I will update in next patch.
> + bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
> + edl->rtype);
> + err = -EIO;
> + goto out;
> + }
> +
> +out:
> + kfree(skb);
> + if (err)
> + bt_dev_err(hdev, "QCA Patch config cmd failed (%d)", err);
> +
> + return err;
> +}
> +
Regards
Marcel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-12-15 11:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-09 6:47 [PATCH v2] Bluetooth: btqca: sequential validation Sai Teja Aluvala
2021-12-09 10:45 ` Marcel Holtmann
2021-12-15 11:28 ` Sai Teja Aluvala (Temp) (QUIC)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).