[PATCH AUTOSEL 4.20 161/304] drm/msm/dsi: fix dsi clock names in DSI 10nm PLL driver

[PATCH AUTOSEL 4.20 161/304] drm/msm/dsi: fix dsi clock names in DSI 10nm PLL driver

[Sasha Levin]

From: Abhinav Kumar <abhinavk@codeaurora.org>

[ Upstream commit c1866d44d149a1ea5c303632114fb6aa08cfd263 ]

Fix the dsi clock names in the DSI 10nm PLL driver to
match the names in the dispcc driver as those are
according to the clock plan of the chipset.

Changes in v2:
- Update the clock diagram with the new clock name

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
index 41bec570c518..31205625c734 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
@@ -17,7 +17,7 @@
  *                              |                |
  *                              |                |
  *                 +---------+  |  +----------+  |  +----+
- *  dsi0vco_clk ---| out_div |--o--| divl_3_0 |--o--| /8 |-- dsi0pllbyte
+ *  dsi0vco_clk ---| out_div |--o--| divl_3_0 |--o--| /8 |-- dsi0_phy_pll_out_byteclk
  *                 +---------+  |  +----------+  |  +----+
  *                              |                |
  *                              |                |         dsi0_pll_by_2_bit_clk
@@ -25,7 +25,7 @@
  *                              |                |  +----+  |  |\  dsi0_pclk_mux
  *                              |                |--| /2 |--o--| \   |
  *                              |                |  +----+     |  \  |  +---------+
- *                              |                --------------|  |--o--| div_7_4 |-- dsi0pll
+ *                              |                --------------|  |--o--| div_7_4 |-- dsi0_phy_pll_out_dsiclk
  *                              |------------------------------|  /     +---------+
  *                              |          +-----+             | /
  *                              -----------| /4? |--o----------|/
@@ -690,7 +690,7 @@ static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm)
 
 	hws[num++] = hw;
 
-	snprintf(clk_name, 32, "dsi%dpllbyte", pll_10nm->id);
+	snprintf(clk_name, 32, "dsi%d_phy_pll_out_byteclk", pll_10nm->id);
 	snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id);
 
 	/* DSI Byte clock = VCO_CLK / OUT_DIV / BIT_DIV / 8 */
@@ -739,7 +739,7 @@ static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm)
 
 	hws[num++] = hw;
 
-	snprintf(clk_name, 32, "dsi%dpll", pll_10nm->id);
+	snprintf(clk_name, 32, "dsi%d_phy_pll_out_dsiclk", pll_10nm->id);
 	snprintf(parent, 32, "dsi%d_pclk_mux", pll_10nm->id);
 
 	/* PIX CLK DIV : DIV_CTRL_7_4*/
-- 
2.19.1

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

[PATCH AUTOSEL 4.20 162/304] drm/msm: dpu: Only check flush register against pending flushes

[Sasha Levin]

From: Sean Paul <seanpaul@chromium.org>

[ Upstream commit 5f79e03b1f7c1b2cf0019ce6365fe5d52629813d ]

There exists a case where a flush of a plane/dma may have been triggered
& started from an async commit. If that plane/dma is subsequently disabled
by the next commit, the flush register will continue to hold the flush
bit for the disabled plane. Since the bit remains active,
pending_kickoff_cnt will never decrement and we'll miss frame_done
events.

This patch limits the check of flush_register to include only those bits
which have been updated with the latest commit.

Changes in v2:
- None

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index 84de385a9f62..60f146f02b77 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -331,7 +331,7 @@ static void dpu_encoder_phys_vid_vblank_irq(void *arg, int irq_idx)
 	if (hw_ctl && hw_ctl->ops.get_flush_register)
 		flush_register = hw_ctl->ops.get_flush_register(hw_ctl);
 
-	if (flush_register == 0)
+	if (!(flush_register & hw_ctl->ops.get_pending_flush(hw_ctl)))
 		new_cnt = atomic_add_unless(&phys_enc->pending_kickoff_cnt,
 				-1, 0);
 	spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags);
-- 
2.19.1

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

[PATCH AUTOSEL 4.20 177/304] clk: qcom: Leave mmss noc on for 8998

[Sasha Levin]

From: Jeffrey Hugo <jhugo@codeaurora.org>

[ Upstream commit 12eced09cd301aa7b1868a67c50a651c2aacd363 ]

Similar to other qcom targets, gcc_mmss_noc_cfg_ahb_clk should not be
disabled.  Any mmss access depends on this clock, and its been observed
that enabling mmssnoc_axi_rpm_clk with rpmcc results in an implicit
access to mmss and will crash the system if gcc_mmss_noc_cfg_ahb_clk is
disabled.

Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support)
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/gcc-msm8998.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
index 9f0ae403d5f5..cb714c3e2924 100644
--- a/drivers/clk/qcom/gcc-msm8998.c
+++ b/drivers/clk/qcom/gcc-msm8998.c
@@ -2042,6 +2042,12 @@ static struct clk_branch gcc_mmss_noc_cfg_ahb_clk = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_mmss_noc_cfg_ahb_clk",
 			.ops = &clk_branch2_ops,
+			/*
+			 * Any access to mmss depends on this clock.
+			 * Gating this clock has been shown to crash the system
+			 * when mmssnoc_axi_rpm_clk is inited in rpmcc.
+			 */
+			.flags = CLK_IS_CRITICAL,
 		},
 	},
 };
-- 
2.19.1

[PATCH AUTOSEL 4.20 289/304] thermal: tsens: qcom: do not create duplicate regmap debugfs entries

[Sasha Levin]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit 4ab248b3b10a58e379e2d32333fff99ea5ca256c ]

Regmap would use device name to create debugfs entries. If the device
has multiple regmaps it is recommended to use name field in regmap_config.
Fix this by providing name to the regmap configs correctly.

Without this patch we would see below error on DB820c.

qcom-tsens 4a9000.thermal-sensor: Failed to create 4a9000.thermal-sensor
debugfs directory

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/qcom/tsens-common.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 3be4be2e0465..78652cac7f3d 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -114,6 +114,14 @@ int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
 }
 
 static const struct regmap_config tsens_config = {
+	.name		= "tm",
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+};
+
+static const struct regmap_config tsens_srot_config = {
+	.name		= "srot",
 	.reg_bits	= 32,
 	.val_bits	= 32,
 	.reg_stride	= 4,
@@ -139,8 +147,8 @@ int __init init_common(struct tsens_device *tmdev)
 		if (IS_ERR(srot_base))
 			return PTR_ERR(srot_base);
 
-		tmdev->srot_map = devm_regmap_init_mmio(tmdev->dev,
-							srot_base, &tsens_config);
+		tmdev->srot_map = devm_regmap_init_mmio(tmdev->dev, srot_base,
+							&tsens_srot_config);
 		if (IS_ERR(tmdev->srot_map))
 			return PTR_ERR(tmdev->srot_map);
 
-- 
2.19.1