Re: [PATCH v4 2/5] soc: qcom: smd-rpm: Create RPM interconnect proxy child device

From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Georgi Djakov <georgi.djakov@linaro.org>
Cc: robh+dt@kernel.org, agross@kernel.org, vkoul@kernel.org,
	evgreen@chromium.org, daidavid1@codeaurora.org,
	linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v4 2/5] soc: qcom: smd-rpm: Create RPM interconnect proxy child device
Date: Thu, 13 Jun 2019 08:40:02 -0700	[thread overview]
Message-ID: <20190613154002.GH6792@builder> (raw)
In-Reply-To: <20190613151323.10850-3-georgi.djakov@linaro.org>

On Thu 13 Jun 08:13 PDT 2019, Georgi Djakov wrote:

> Register a platform device to handle the communication of bus bandwidth
> requests with the remote processor. The interconnect proxy device is part
> of this remote processor (RPM) hardware. Let's create a icc-smd-rpm proxy
> child device to represent the bus throughput functionality that is provided
> by the RPM.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> ---
> 
> v4:
> - Return error if platform_device_register_data() fails
> - Remove platform_set_drvdata() on the child device.
> 
> v3:
> - New patch.
> 
>  drivers/soc/qcom/smd-rpm.c | 17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
> index fa9dd12b5e39..34cdd638a6c1 100644
> --- a/drivers/soc/qcom/smd-rpm.c
> +++ b/drivers/soc/qcom/smd-rpm.c
> @@ -19,12 +19,14 @@
>  /**
>   * struct qcom_smd_rpm - state of the rpm device driver
>   * @rpm_channel:	reference to the smd channel
> + * @icc:		interconnect proxy device
>   * @ack:		completion for acks
>   * @lock:		mutual exclusion around the send/complete pair
>   * @ack_status:		result of the rpm request
>   */
>  struct qcom_smd_rpm {
>  	struct rpmsg_endpoint *rpm_channel;
> +	struct platform_device *icc;
>  	struct device *dev;
>  
>  	struct completion ack;
> @@ -193,6 +195,7 @@ static int qcom_smd_rpm_callback(struct rpmsg_device *rpdev,
>  static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev)
>  {
>  	struct qcom_smd_rpm *rpm;
> +	int ret;
>  
>  	rpm = devm_kzalloc(&rpdev->dev, sizeof(*rpm), GFP_KERNEL);
>  	if (!rpm)
> @@ -205,11 +208,23 @@ static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev)
>  	rpm->rpm_channel = rpdev->ept;
>  	dev_set_drvdata(&rpdev->dev, rpm);
>  
> -	return of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev);
> +	rpm->icc = platform_device_register_data(&rpdev->dev, "icc_smd_rpm", -1,
> +						 NULL, 0);
> +	if (IS_ERR(rpm->icc))
> +		return PTR_ERR(rpm->icc);
> +
> +	ret = of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev);
> +	if (ret)
> +		platform_device_unregister(rpm->icc);
> +
> +	return ret;
>  }
>  
>  static void qcom_smd_rpm_remove(struct rpmsg_device *rpdev)
>  {
> +	struct qcom_smd_rpm *rpm = dev_get_drvdata(&rpdev->dev);
> +
> +	platform_device_unregister(rpm->icc);
>  	of_platform_depopulate(&rpdev->dev);
>  }
>  