Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Cc: agross@kernel.org, bjorn.andersson@linaro.org,
	broonie@kernel.org, devicetree@vger.kernel.org,
	lgirdwood@gmail.com, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org, Mark Brown <broonie@kernel.org>,
	mark.rutland@arm.com, robh+dt@kernel.org
Subject: Applied "arm64: dts: msm8998-mtp: Add pm8005_s1 regulator" to the regulator tree
Date: Tue, 18 Jun 2019 19:33:20 +0100 (BST)
Message-ID: <20190618183320.210B8440046@finisterre.sirena.org.uk> (raw)
In-Reply-To: <20190617183759.13605-1-jeffrey.l.hugo@gmail.com>

The patch

   arm64: dts: msm8998-mtp: Add pm8005_s1 regulator

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 1c3f37d11023ff5b57135bc2bbacf4816baa67df Mon Sep 17 00:00:00 2001
From: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Date: Mon, 17 Jun 2019 11:37:58 -0700
Subject: [PATCH] arm64: dts: msm8998-mtp: Add pm8005_s1 regulator

The pm8005_s1 is VDD_GFX, and needs to be on to enable the GPU.
This should be hooked up to the GPU CPR, but we don't have support for that
yet, so until then, just turn on the regulator and keep it on so that we
can focus on basic GPU bringup.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index f09f3e03f708..108667ce4f31 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -27,6 +27,23 @@
 	status = "okay";
 };
 
+&pm8005_lsid1 {
+	pm8005-regulators {
+		compatible = "qcom,pm8005-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+
+		pm8005_s1: s1 { /* VDD_GFX supply */
+			regulator-min-microvolt = <524000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-enable-ramp-delay = <500>;
+
+			/* hack until we rig up the gpu consumer */
+			regulator-always-on;
+		};
+	};
+};
+
 &qusb2phy {
 	status = "okay";
 
-- 
2.20.1


  reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-17 18:36 [PATCH v5 0/5] PM8005 and PMS405 regulator support Jeffrey Hugo
2019-06-17 18:37 ` [PATCH v5 1/5] dt-bindings: qcom_spmi: Document PM8005 regulators Jeffrey Hugo
2019-06-18 18:33   ` Applied "dt-bindings: qcom_spmi: Document PM8005 regulators" to the regulator tree Mark Brown
2019-06-17 18:37 ` [PATCH v5 2/5] regulator: qcom_spmi: Add support for PM8005 Jeffrey Hugo
2019-06-18 18:33   ` Applied "regulator: qcom_spmi: Add support for PM8005" to the regulator tree Mark Brown
2019-06-17 18:37 ` [PATCH v5 3/5] arm64: dts: msm8998-mtp: Add pm8005_s1 regulator Jeffrey Hugo
2019-06-18 18:33   ` Mark Brown [this message]
2019-06-17 18:38 ` [PATCH v5 4/5] dt-bindings: qcom_spmi: Document pms405 support Jeffrey Hugo
2019-06-18 18:33   ` Applied "dt-bindings: qcom_spmi: Document pms405 support" to the regulator tree Mark Brown
2019-06-17 18:38 ` [PATCH v5 5/5] regulator: qcom_spmi: add PMS405 SPMI regulator Jeffrey Hugo
2019-06-18 18:33   ` Applied "regulator: qcom_spmi: add PMS405 SPMI regulator" to the regulator tree Mark Brown

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190618183320.210B8440046@finisterre.sirena.org.uk \
    --to=broonie@kernel.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jeffrey.l.hugo@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org linux-arm-msm@archiver.kernel.org
	public-inbox-index linux-arm-msm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox