linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: kholk11@gmail.com
To: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org, ccross@android.com,
	mark.rutland@arm.com, robh+dt@kernel.org, agross@kernel.org,
	bjorn.andersson@linaro.org, marijns95@gmail.com,
	kholk11@gmail.com
Subject: [PATCH v2 3/5] arm64: dts: qcom: Add configuration for PM8950 and PMI8950 peripherals
Date: Thu, 31 Oct 2019 12:16:43 +0100	[thread overview]
Message-ID: <20191031111645.34777-4-kholk11@gmail.com> (raw)
In-Reply-To: <20191031111645.34777-1-kholk11@gmail.com>

From: AngeloGioacchino Del Regno <kholk11@gmail.com>

The PM(I)8950 feature integrated peripherals like ADC, GPIO
controller, MPPs, PON keys and others.
Add them to DT files that will be imported on boards having
this PMIC combo (or one of them, anyways).

Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
---
 arch/arm64/boot/dts/qcom/pm8950.dtsi  | 187 ++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/pmi8950.dtsi |  98 ++++++++++++++
 2 files changed, 285 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm8950.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pmi8950.dtsi

diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi
new file mode 100644
index 000000000000..a349a8dd867e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@gmail.com>
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pm8950_lsid0: pm8950@0 {
+		compatible = "qcom,pm8950", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+		};
+
+		pm8950_mpps: mpps@a000 {
+			compatible = "qcom,pm8950-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+				     <0 0xa1 0 IRQ_TYPE_NONE>,
+				     <0 0xa2 0 IRQ_TYPE_NONE>,
+				     <0 0xa3 0 IRQ_TYPE_NONE>;
+
+			/* MPP_2: PA_THERM1 */
+			pa_therm {
+				pm8950_mpp2_def: pa_therm1_default {
+					pins = "mpp2";
+					function = "analog";
+					input-enable;
+					qcom,amux-route =
+						<PMIC_MPP_AMUX_ROUTE_CH6>;
+				};
+			};
+
+			/* MPP_4: QUIET_THERM */
+			case_therm {
+				pm8950_mpp4_def: case_therm_default {
+					pins = "mpp4";
+					function = "analog";
+					input-enable;
+					qcom,amux-route =
+						<PMIC_MPP_AMUX_ROUTE_CH8>;
+				};
+			};
+		};
+
+		pm8950_gpios: gpio@c000 {
+			compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				<0 0xc1 0 IRQ_TYPE_NONE>,
+				<0 0xc3 0 IRQ_TYPE_NONE>,
+				<0 0xc4 0 IRQ_TYPE_NONE>,
+				<0 0xc5 0 IRQ_TYPE_NONE>,
+				<0 0xc6 0 IRQ_TYPE_NONE>,
+				<0 0xc7 0 IRQ_TYPE_NONE>;
+		};
+
+		pm8950_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8950_adc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8950_adc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			vcoin {
+				label = "vcoin";
+				reg = <VADC_VCOIN>;
+				qcom,pre-scaling = <1 1>;
+			};
+			vph_pwr {
+				label = "vph_pwr";
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 1>;
+			};
+			die_temp {
+				label = "die_temp";
+				reg = <VADC_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+			};
+			ref_625mv {
+				label = "ref_625mv";
+				reg = <VADC_REF_625MV>;
+				qcom,pre-scaling = <1 1>;
+			};
+			ref_1250v {
+				label = "ref_1250v";
+				reg = <VADC_REF_1250MV>;
+				qcom,pre-scaling = <1 1>;
+			};
+			ref_buf_625mv {
+				label = "ref_buf_625mv";
+				reg = <VADC_SPARE1>;
+				qcom,pre-scaling = <1 1>;
+			};
+			ref_gnd {
+				reg = <VADC_GND_REF>;
+			};
+			ref_vdd {
+				reg = <VADC_VDD_VADC>;
+			};
+			pa_therm0 {
+				label = "pa_therm0";
+				reg = <VADC_LR_MUX7_HW_ID>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+			pa_therm1 {
+				label = "pa_therm1";
+				reg = <VADC_P_MUX2_1_1>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+			xo_therm {
+				label = "xo_therm";
+				reg = <VADC_LR_MUX3_XO_THERM>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+			xo_therm_buf {
+				label = "xo_therm_buf";
+				reg = <VADC_LR_MUX3_BUF_XO_THERM>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+			case_therm {
+				label = "case_therm";
+				reg = <VADC_P_MUX4_1_1>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+		};
+	};
+
+	pm8950_lsid1: pm8950@1 {
+		compatible = "qcom,pm8950", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8950_spmi_regulators: regulators {
+			compatible = "qcom,pm8950-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
new file mode 100644
index 000000000000..73afdfca27c1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@gmail.com>
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmi8950_lsid0: pmic@2 {
+		compatible = "qcom,pmi8950", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8950_mpp: mpps@a000 {
+			compatible = "qcom,pmi8950-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0x2 0xa0 0 IRQ_TYPE_NONE>,
+				<0x2 0xa1 0 IRQ_TYPE_NONE>,
+				<0x2 0xa2 0 IRQ_TYPE_NONE>,
+				<0x2 0xa3 0 IRQ_TYPE_NONE>;
+		};
+
+		pmi8950_gpio: gpios@c000 {
+			compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				<0 0xc1 0 IRQ_TYPE_NONE>;
+		};
+
+		pmi8950_adc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			usbin {
+				label = "usbin";
+				reg = <VADC_USBIN>;
+				qcom,pre-scaling = <1 4>;
+			};
+			dcin {
+				label = "dcin";
+				reg = <VADC_DCIN>;
+				qcom,pre-scaling = <1 4>;
+			};
+			vchg_sns {
+				label = "vchg_sns";
+				reg = <VADC_VCHG_SNS>;
+				qcom,pre-scaling = <1 1>;
+			};
+			ref_625mv {
+				label = "ref_625mv";
+				reg = <VADC_REF_625MV>;
+				qcom,pre-scaling = <1 1>;
+			};
+			ref_1250v {
+				label = "ref_1250v";
+				reg = <VADC_REF_1250MV>;
+				qcom,pre-scaling = <1 1>;
+			};
+			ref_gnd {
+				reg = <VADC_GND_REF>;
+			};
+			ref_vdd {
+				reg = <VADC_VDD_VADC>;
+			};
+			chg_temp {
+				label = "chg_temp";
+				reg = <VADC_SPARE2>;
+				qcom,pre-scaling = <1 1>;
+			};
+			usb_dp {
+				label = "usb_dp";
+				reg = <VADC_USB_DP>;
+				qcom,pre-scaling = <1 1>;
+			};
+			usb_dm {
+				label = "usb_dm";
+				reg = <VADC_USB_DM>;
+				qcom,pre-scaling = <1 1>;
+			};
+		};
+	};
+
+	pmi8950_lsid1: pmic@3 {
+		compatible = "qcom,pmi8950", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
-- 
2.21.0


  parent reply	other threads:[~2019-10-31 11:16 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-31 11:16 [PATCH v2 0/5] MSM8976/56 Sony Xperia Loire (X/XCompact) smartphones kholk11
2019-10-31 11:16 ` [PATCH v2 1/5] dt-bindings: iio: spmi-vadc: Add definitions for USB DP/DM VADCs kholk11
2019-11-05 18:42   ` Rob Herring
2019-11-06 17:54     ` AngeloGioacchino Del Regno
2019-10-31 11:16 ` [PATCH v2 2/5] arm64: dts: pm8004: Add SPMI regulator and add phandles to lsids kholk11
2019-10-31 11:16 ` kholk11 [this message]
2019-10-31 19:58   ` [PATCH v2 3/5] arm64: dts: qcom: Add configuration for PM8950 and PMI8950 peripherals Brian Masney
2019-11-05 11:18     ` AngeloGioacchino Del Regno
2019-11-05 12:47       ` Brian Masney
2019-10-31 11:16 ` [PATCH v2 4/5] arm64: dts: qcom: Add MSM8976 SoC support dts files kholk11
2019-12-10 18:12   ` Amit Kucheria
2019-10-31 11:16 ` [PATCH v2 5/5] arm64: dts: qcom: Add Sony Xperia (Loire) X and X Compact support kholk11

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191031111645.34777-4-kholk11@gmail.com \
    --to=kholk11@gmail.com \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=ccross@android.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=marijns95@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).