* qcom: Switch SDM845 WLAN firmware
@ 2019-12-27 1:55 Bjorn Andersson
2019-12-30 12:27 ` Josh Boyer
0 siblings, 1 reply; 3+ messages in thread
From: Bjorn Andersson @ 2019-12-27 1:55 UTC (permalink / raw)
To: linux-firmware; +Cc: Nicolas Dechesne, linux-arm-msm, kvalo
Hi,
The recently committed wlan firmware found under ath10k/WCN3990 shows
better stability under load than the one present for SDM845. So this
replaces the current firmware with a symlink to the newly contributed
one.
Regards,
Bjorn
The following changes since commit 6871bffa79ed240696986837cfb17b272ff57466:
Merge branch 'ath10k-20191220' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware (2019-12-20 08:41:19 -0500)
are available in the Git repository at:
https://github.com/andersson/linux-firmware.git RB3-wlan-firmware-1387
for you to fetch changes up to 4570585aad1009b84fe0d4d0677dd8d4c9956b42:
qcom: Switch SDM845 WLAN firmware (2019-12-26 17:47:56 -0800)
----------------------------------------------------------------
Bjorn Andersson (1):
qcom: Switch SDM845 WLAN firmware
WHENCE | 1 -
qcom/sdm845/wlanmdsp.mbn | Bin 3311964 -> 39 bytes
2 files changed, 1 deletion(-)
mode change 100644 => 120000 qcom/sdm845/wlanmdsp.mbn
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: qcom: Switch SDM845 WLAN firmware
2019-12-27 1:55 qcom: Switch SDM845 WLAN firmware Bjorn Andersson
@ 2019-12-30 12:27 ` Josh Boyer
2020-01-02 18:55 ` Bjorn Andersson
0 siblings, 1 reply; 3+ messages in thread
From: Josh Boyer @ 2019-12-30 12:27 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Linux Firmware, Nicolas Dechesne, Linux-arm Msm, Kalle Valo
On Thu, Dec 26, 2019 at 8:55 PM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> Hi,
>
> The recently committed wlan firmware found under ath10k/WCN3990 shows
> better stability under load than the one present for SDM845. So this
> replaces the current firmware with a symlink to the newly contributed
> one.
>
> Regards,
> Bjorn
>
> The following changes since commit 6871bffa79ed240696986837cfb17b272ff57466:
>
> Merge branch 'ath10k-20191220' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware (2019-12-20 08:41:19 -0500)
>
> are available in the Git repository at:
>
> https://github.com/andersson/linux-firmware.git RB3-wlan-firmware-1387
>
> for you to fetch changes up to 4570585aad1009b84fe0d4d0677dd8d4c9956b42:
>
> qcom: Switch SDM845 WLAN firmware (2019-12-26 17:47:56 -0800)
>
> ----------------------------------------------------------------
> Bjorn Andersson (1):
> qcom: Switch SDM845 WLAN firmware
>
> WHENCE | 1 -
> qcom/sdm845/wlanmdsp.mbn | Bin 3311964 -> 39 bytes
> 2 files changed, 1 deletion(-)
> mode change 100644 => 120000 qcom/sdm845/wlanmdsp.mbn
This messes up WHENCE. Either you want to use the Link: statement in
WHENCE, or keep the File line if you're going to create a symlink
manually. The Link statement is preferred. Can you redo?
josh
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: qcom: Switch SDM845 WLAN firmware
2019-12-30 12:27 ` Josh Boyer
@ 2020-01-02 18:55 ` Bjorn Andersson
0 siblings, 0 replies; 3+ messages in thread
From: Bjorn Andersson @ 2020-01-02 18:55 UTC (permalink / raw)
To: Josh Boyer; +Cc: Linux Firmware, Nicolas Dechesne, Linux-arm Msm, Kalle Valo
On Mon 30 Dec 04:27 PST 2019, Josh Boyer wrote:
> On Thu, Dec 26, 2019 at 8:55 PM Bjorn Andersson
> <bjorn.andersson@linaro.org> wrote:
> >
> > Hi,
> >
> > The recently committed wlan firmware found under ath10k/WCN3990 shows
> > better stability under load than the one present for SDM845. So this
> > replaces the current firmware with a symlink to the newly contributed
> > one.
> >
> > Regards,
> > Bjorn
> >
> > The following changes since commit 6871bffa79ed240696986837cfb17b272ff57466:
> >
> > Merge branch 'ath10k-20191220' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware (2019-12-20 08:41:19 -0500)
> >
> > are available in the Git repository at:
> >
> > https://github.com/andersson/linux-firmware.git RB3-wlan-firmware-1387
> >
> > for you to fetch changes up to 4570585aad1009b84fe0d4d0677dd8d4c9956b42:
> >
> > qcom: Switch SDM845 WLAN firmware (2019-12-26 17:47:56 -0800)
> >
> > ----------------------------------------------------------------
> > Bjorn Andersson (1):
> > qcom: Switch SDM845 WLAN firmware
> >
> > WHENCE | 1 -
> > qcom/sdm845/wlanmdsp.mbn | Bin 3311964 -> 39 bytes
> > 2 files changed, 1 deletion(-)
> > mode change 100644 => 120000 qcom/sdm845/wlanmdsp.mbn
>
> This messes up WHENCE. Either you want to use the Link: statement in
> WHENCE, or keep the File line if you're going to create a symlink
> manually. The Link statement is preferred. Can you redo?
>
Sorry about that. I will respin this.
Regards,
Bjorn
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-01-02 18:55 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-27 1:55 qcom: Switch SDM845 WLAN firmware Bjorn Andersson
2019-12-30 12:27 ` Josh Boyer
2020-01-02 18:55 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).