linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 1/2] ARM: dts: qcom: add gpio-ranges property
@ 2020-01-08 12:54 Robert Marko
  2020-01-08 12:54 ` [PATCH v2 2/2] ARM64: " Robert Marko
  2020-01-25 18:47 ` [PATCH v2 1/2] ARM: " Robert Marko
  0 siblings, 2 replies; 3+ messages in thread
From: Robert Marko @ 2020-01-08 12:54 UTC (permalink / raw)
  To: agross, robh+dt, mark.rutland, linux-arm-msm, devicetree,
	Bjorn Andersson
  Cc: Christian Lamparter, Sven Eckelmann, Linus Walleij, Robert Marko,
	Luka Perkov

From: Christian Lamparter <chunkeey@gmail.com>

This patch adds the gpio-ranges property to almost all of
the Qualcomm ARM platforms that utilize the pinctrl-msm
framework.

The gpio-ranges property is part of the gpiolib subsystem.
As a result, the binding text is available in section
"2.1 gpio- and pin-controller interaction" of
Documentation/devicetree/bindings/gpio/gpio.txt

For more information please see the patch titled:
"pinctrl: msm: fix gpio-hog related boot issues" from
this series.

Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019]
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Tested-by: Robert Marko <robert.marko@sartura.hr> [ipq4019]
Cc: Luka Perkov <luka.perkov@sartura.hr>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
Changes since v1:
- Split ARM and ARM64 DTS changes into separate patches

 arch/arm/boot/dts/qcom-apq8064.dtsi | 1 +
 arch/arm/boot/dts/qcom-apq8084.dtsi | 1 +
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 +
 arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 +
 arch/arm/boot/dts/qcom-msm8660.dtsi | 1 +
 arch/arm/boot/dts/qcom-msm8960.dtsi | 1 +
 arch/arm/boot/dts/qcom-msm8974.dtsi | 1 +
 8 files changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 8b79b4112ee1..2687c4e890ba 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -350,6 +350,7 @@
 			reg = <0x800000 0x4000>;
 
 			gpio-controller;
+			gpio-ranges = <&tlmm_pinmux 0 0 90>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 0a0fb147ebb9..4cc2d33f3d3b 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -401,6 +401,7 @@
 			compatible = "qcom,apq8084-pinctrl";
 			reg = <0xfd510000 0x4000>;
 			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 147>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 72d4e290b543..b6e5203a210b 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -201,6 +201,7 @@
 			compatible = "qcom,ipq4019-pinctrl";
 			reg = <0x01000000 0x300000>;
 			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 100>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 16c0da97932c..4021f661cd11 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -119,6 +119,7 @@
 			reg = <0x800000 0x4000>;
 
 			gpio-controller;
+			gpio-ranges = <&qcom_pinmux 0 0 69>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 356e9535f7a6..347b4f7d7889 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -128,6 +128,7 @@
 		msmgpio: pinctrl@800000 {
 			compatible = "qcom,mdm9615-pinctrl";
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 88>;
 			#gpio-cells = <2>;
 			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index ec5cbc468bd3..480fc08cbe8e 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -115,6 +115,7 @@
 			reg = <0x800000 0x4000>;
 
 			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 173>;
 			#gpio-cells = <2>;
 			interrupts = <0 16 0x4>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index f2aeaccdc1ad..172ea3c70eac 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -107,6 +107,7 @@
 		msmgpio: pinctrl@800000 {
 			compatible = "qcom,msm8960-pinctrl";
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 152>;
 			#gpio-cells = <2>;
 			interrupts = <0 16 0x4>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 369e58f64145..1689cf925b03 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -707,6 +707,7 @@
 			compatible = "qcom,msm8974-pinctrl";
 			reg = <0xfd510000 0x4000>;
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 146>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-- 
2.24.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread
* [PATCH v2 2/2] ARM64: dts: qcom: add gpio-ranges property
  2020-01-08 12:54 [PATCH v2 1/2] ARM: dts: qcom: add gpio-ranges property Robert Marko
@ 2020-01-08 12:54 ` Robert Marko
  2020-01-25 18:47 ` [PATCH v2 1/2] ARM: " Robert Marko
  1 sibling, 0 replies; 3+ messages in thread
From: Robert Marko @ 2020-01-08 12:54 UTC (permalink / raw)
  To: agross, robh+dt, mark.rutland, linux-arm-msm, devicetree,
	Bjorn Andersson
  Cc: Christian Lamparter, Sven Eckelmann, Linus Walleij, Robert Marko,
	Luka Perkov

From: Christian Lamparter <chunkeey@gmail.com>

This patch adds the gpio-ranges property to almost all of
the Qualcomm ARM platforms that utilize the pinctrl-msm
framework.

The gpio-ranges property is part of the gpiolib subsystem.
As a result, the binding text is available in section
"2.1 gpio- and pin-controller interaction" of
Documentation/devicetree/bindings/gpio/gpio.txt

For more information please see the patch titled:
"pinctrl: msm: fix gpio-hog related boot issues" from
this series.

Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019]
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Tested-by: Robert Marko <robert.marko@sartura.hr> [ipq4019]
Cc: Luka Perkov <luka.perkov@sartura.hr>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
Changes since v1:
- Split ARM and ARM64 DTS changes into separate patches

 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 +
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 +
 arch/arm64/boot/dts/qcom/msm8992.dtsi | 1 +
 arch/arm64/boot/dts/qcom/msm8994.dtsi | 1 +
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 +
 5 files changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 67ee5f560104..2b31823d3ccd 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -21,6 +21,7 @@
 			reg = <0x1000000 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 70>;
 			#gpio-cells = <0x2>;
 			interrupt-controller;
 			#interrupt-cells = <0x2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5ea9fb8f2f87..2d1cbe762b3a 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -374,6 +374,7 @@
 			reg = <0x1000000 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 122>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 8be60c08a9ab..2021795c99ad 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -171,6 +171,7 @@
 			reg = <0xfd510000 0x4000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 146>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 3932757f78b7..b1c2d7d6a0f2 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -133,6 +133,7 @@
 			reg = <0xfd510000 0x4000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 146>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 87f4d9c1b0d4..81576aeb2408 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1234,6 +1234,7 @@
 			reg = <0x01010000 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 150>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-- 
2.24.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread
* Re: [PATCH v2 1/2] ARM: dts: qcom: add gpio-ranges property
  2020-01-08 12:54 [PATCH v2 1/2] ARM: dts: qcom: add gpio-ranges property Robert Marko
  2020-01-08 12:54 ` [PATCH v2 2/2] ARM64: " Robert Marko
@ 2020-01-25 18:47 ` Robert Marko
  1 sibling, 0 replies; 3+ messages in thread
From: Robert Marko @ 2020-01-25 18:47 UTC (permalink / raw)
  To: agross, robh+dt, mark.rutland, linux-arm-msm, devicetree,
	Bjorn Andersson
  Cc: Christian Lamparter, Sven Eckelmann, Linus Walleij, Luka Perkov

Any issues that are preventing merging of this patch?

Cheers

On Wed, Jan 8, 2020 at 1:55 PM Robert Marko <robert.marko@sartura.hr> wrote:
>
> From: Christian Lamparter <chunkeey@gmail.com>
>
> This patch adds the gpio-ranges property to almost all of
> the Qualcomm ARM platforms that utilize the pinctrl-msm
> framework.
>
> The gpio-ranges property is part of the gpiolib subsystem.
> As a result, the binding text is available in section
> "2.1 gpio- and pin-controller interaction" of
> Documentation/devicetree/bindings/gpio/gpio.txt
>
> For more information please see the patch titled:
> "pinctrl: msm: fix gpio-hog related boot issues" from
> this series.
>
> Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
> Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019]
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
> Tested-by: Robert Marko <robert.marko@sartura.hr> [ipq4019]
> Cc: Luka Perkov <luka.perkov@sartura.hr>
> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
> ---
> Changes since v1:
> - Split ARM and ARM64 DTS changes into separate patches
>
>  arch/arm/boot/dts/qcom-apq8064.dtsi | 1 +
>  arch/arm/boot/dts/qcom-apq8084.dtsi | 1 +
>  arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
>  arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 +
>  arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 +
>  arch/arm/boot/dts/qcom-msm8660.dtsi | 1 +
>  arch/arm/boot/dts/qcom-msm8960.dtsi | 1 +
>  arch/arm/boot/dts/qcom-msm8974.dtsi | 1 +
>  8 files changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
> index 8b79b4112ee1..2687c4e890ba 100644
> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> @@ -350,6 +350,7 @@
>                         reg = <0x800000 0x4000>;
>
>                         gpio-controller;
> +                       gpio-ranges = <&tlmm_pinmux 0 0 90>;
>                         #gpio-cells = <2>;
>                         interrupt-controller;
>                         #interrupt-cells = <2>;
> diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
> index 0a0fb147ebb9..4cc2d33f3d3b 100644
> --- a/arch/arm/boot/dts/qcom-apq8084.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
> @@ -401,6 +401,7 @@
>                         compatible = "qcom,apq8084-pinctrl";
>                         reg = <0xfd510000 0x4000>;
>                         gpio-controller;
> +                       gpio-ranges = <&tlmm 0 0 147>;
>                         #gpio-cells = <2>;
>                         interrupt-controller;
>                         #interrupt-cells = <2>;
> diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> index 72d4e290b543..b6e5203a210b 100644
> --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> @@ -201,6 +201,7 @@
>                         compatible = "qcom,ipq4019-pinctrl";
>                         reg = <0x01000000 0x300000>;
>                         gpio-controller;
> +                       gpio-ranges = <&tlmm 0 0 100>;
>                         #gpio-cells = <2>;
>                         interrupt-controller;
>                         #interrupt-cells = <2>;
> diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> index 16c0da97932c..4021f661cd11 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> @@ -119,6 +119,7 @@
>                         reg = <0x800000 0x4000>;
>
>                         gpio-controller;
> +                       gpio-ranges = <&qcom_pinmux 0 0 69>;
>                         #gpio-cells = <2>;
>                         interrupt-controller;
>                         #interrupt-cells = <2>;
> diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
> index 356e9535f7a6..347b4f7d7889 100644
> --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
> +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
> @@ -128,6 +128,7 @@
>                 msmgpio: pinctrl@800000 {
>                         compatible = "qcom,mdm9615-pinctrl";
>                         gpio-controller;
> +                       gpio-ranges = <&msmgpio 0 0 88>;
>                         #gpio-cells = <2>;
>                         interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
>                         interrupt-controller;
> diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
> index ec5cbc468bd3..480fc08cbe8e 100644
> --- a/arch/arm/boot/dts/qcom-msm8660.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
> @@ -115,6 +115,7 @@
>                         reg = <0x800000 0x4000>;
>
>                         gpio-controller;
> +                       gpio-ranges = <&tlmm 0 0 173>;
>                         #gpio-cells = <2>;
>                         interrupts = <0 16 0x4>;
>                         interrupt-controller;
> diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
> index f2aeaccdc1ad..172ea3c70eac 100644
> --- a/arch/arm/boot/dts/qcom-msm8960.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
> @@ -107,6 +107,7 @@
>                 msmgpio: pinctrl@800000 {
>                         compatible = "qcom,msm8960-pinctrl";
>                         gpio-controller;
> +                       gpio-ranges = <&msmgpio 0 0 152>;
>                         #gpio-cells = <2>;
>                         interrupts = <0 16 0x4>;
>                         interrupt-controller;
> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
> index 369e58f64145..1689cf925b03 100644
> --- a/arch/arm/boot/dts/qcom-msm8974.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
> @@ -707,6 +707,7 @@
>                         compatible = "qcom,msm8974-pinctrl";
>                         reg = <0xfd510000 0x4000>;
>                         gpio-controller;
> +                       gpio-ranges = <&msmgpio 0 0 146>;
>                         #gpio-cells = <2>;
>                         interrupt-controller;
>                         #interrupt-cells = <2>;
> --
> 2.24.1
>

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-01-25 18:48 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-08 12:54 [PATCH v2 1/2] ARM: dts: qcom: add gpio-ranges property Robert Marko
2020-01-08 12:54 ` [PATCH v2 2/2] ARM64: " Robert Marko
2020-01-25 18:47 ` [PATCH v2 1/2] ARM: " Robert Marko

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).