[PATCH v6 0/2] Add support for rm69299 Visionox panel driver and add devicetree bindings for visionox panel

[PATCH v6 0/2] Add support for rm69299 Visionox panel driver and add devicetree bindings for visionox panel

[Harigovindan P]

Adding support for visionox rm69299 panel driver and adding bindings for the same panel.

Harigovindan P (2):
  dt-bindings: display: add visionox rm69299 panel variant
  drm/panel: add support for rm69299 visionox panel driver

 .../display/panel/visionox,rm69299.yaml       |  77 +++++
 drivers/gpu/drm/panel/Kconfig                 |   8 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-visionox-rm69299.c    | 295 ++++++++++++++++++
 4 files changed, 381 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-visionox-rm69299.c

-- 
2.25.1

[PATCH v6 1/2] dt-bindings: display: add visionox rm69299 panel variant

[Harigovindan P]

Add bindings for visionox rm69299 panel.

Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
---

Changes in v2:
	- Removed unwanted properties from description.
	- Creating source files without execute permissions(Rob Herring).
Changes in v3:
	- Changing txt file into yaml
Changes in v4:
	- Updating license identifier.
	- Moving yaml file inside panel directory.
	- Removing pinctrl entries.
	- Adding documentation for reset-gpios.
Changes in v5:
	- No changes. Updated 2/2 Patch.
Changes in v6:
	- Removing patternProperties.
	- Added " |" after description.
	- Setting port and reset-gpios to true.
	- Removing @ae94000 for dsi node.

 .../display/panel/visionox,rm69299.yaml       | 77 +++++++++++++++++++
 1 file changed, 77 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
new file mode 100644
index 000000000000..18854cc7d99e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox model RM69299 Panels Device Tree Bindings.
+
+maintainers:
+ - Harigovindan P <harigovi@codeaurora.org>
+
+description: |
+ This binding is for display panels using a Visionox RM692999 panel.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: visionox,rm69299-1080p-display
+
+  reg:
+    maxItems: 1
+
+  vdda-supply:
+    description: |
+      Phandle of the regulator that provides the vdda supply voltage.
+
+  vdd3p3-supply:
+    description: |
+      Phandle of the regulator that provides the vdd3p3 supply voltage.
+
+  ports:
+    type: object
+    description: |
+      A node containing DSI input & output port nodes with endpoint
+      definitions as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+      Documentation/devicetree/bindings/graph.txt
+      properties:
+        port: true
+
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - vdda-supply
+  - vdd3p3-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+- |
+    dsi {
+        panel@0 {
+            compatible = "visionox,rm69299-1080p-display";
+
+            vdda-supply = <&src_pp1800_l8c>;
+            vdd3p3-supply = <&src_pp2800_l18a>;
+
+            reset-gpios = <&pm6150l_gpio 3 0>;
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    port@0 {
+                            reg = <0>;
+                            panel0_in: endpoint {
+                                remote-endpoint = <&dsi0_out>;
+                            };
+                    };
+            };
+        };
+    };
+...
+
-- 
2.25.1

[PATCH v6 2/2] drm/panel: add support for rm69299 visionox panel driver

[Harigovindan P]

Add support for Visionox panel driver.

Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
---

Changes in v2:
	- Dropping redundant space in Kconfig(Sam Ravnborg).
	- Changing structure for include files(Sam Ravnborg).
	- Removing backlight related code and functions(Sam Ravnborg).
	- Removing repeated printing of error message(Sam Ravnborg).
	- Adding drm_connector as an argument for get_modes function.
Changes in v3:
	- Adding arguments for drm_panel_init to support against mainline.
Changes in v4:
	- Removing error messages from regulator_set_load.
	- Removing dev struct entry.
	- Removing checks.
	- Dropping empty comment lines.
Changes in v5:
	- Removing unused struct member variables.
	- Removing blank lines.
	- Fixed indentation.
	- Invoking dsi_detach and panel_remove while early exiting from probe.
Changes in v6:
	- Changed "35597" to "rm69299" for power_on function.
	- Removing rm69299_config since it supports single type of panel for now.
	- Fixed alignment.
	- Using goto statements when regulator_set_load fails.

 drivers/gpu/drm/panel/Kconfig                 |   8 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-visionox-rm69299.c    | 295 ++++++++++++++++++
 3 files changed, 304 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-visionox-rm69299.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index ae44ac2ec106..7b696f304a99 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -389,6 +389,14 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
 	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
 	  Video Mode panel
 
+config DRM_PANEL_VISIONOX_RM69299
+	tristate "Visionox RM69299"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	help
+	  Say Y here if you want to enable support for Visionox
+	  RM69299  DSI Video Mode panel.
+
 config DRM_PANEL_XINPENG_XPP055C272
 	tristate "Xinpeng XPP055C272 panel driver"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 7c4d3c581fd4..9f11d067a6b2 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -41,4 +41,5 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
 obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
+obj-$(CONFIG_DRM_PANEL_VISIONOX_RM69299) += panel-visionox-rm69299.o
 obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += panel-xinpeng-xpp055c272.o
diff --git a/drivers/gpu/drm/panel/panel-visionox-rm69299.c b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
new file mode 100644
index 000000000000..b226723a7543
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+struct visionox_rm69299 {
+	struct drm_panel panel;
+	struct regulator_bulk_data supplies[2];
+	struct gpio_desc *reset_gpio;
+	struct mipi_dsi_device *dsi;
+	bool prepared;
+	bool enabled;
+};
+
+static inline struct visionox_rm69299 *panel_to_ctx(struct drm_panel *panel)
+{
+	return container_of(panel, struct visionox_rm69299, panel);
+}
+
+static int visionox_rm69299_power_on(struct visionox_rm69299 *ctx)
+{
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Reset sequence of visionox panel requires the panel to be
+	 * out of reset for 10ms, followed by being held in reset
+	 * for 10ms and then out again
+	 */
+	gpiod_set_value(ctx->reset_gpio, 1);
+	usleep_range(10000, 20000);
+	gpiod_set_value(ctx->reset_gpio, 0);
+	usleep_range(10000, 20000);
+	gpiod_set_value(ctx->reset_gpio, 1);
+	usleep_range(10000, 20000);
+
+	return 0;
+}
+
+static int visionox_rm69299_power_off(struct visionox_rm69299 *ctx)
+{
+	gpiod_set_value(ctx->reset_gpio, 0);
+
+	return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static int visionox_rm69299_unprepare(struct drm_panel *panel)
+{
+	struct visionox_rm69299 *ctx = panel_to_ctx(panel);
+	int ret;
+
+	ctx->dsi->mode_flags = 0;
+
+	ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0);
+	if (ret < 0)
+		DRM_DEV_ERROR(ctx->panel.dev,
+			"set_display_off cmd failed ret = %d\n", ret);
+
+	/* 120ms delay required here as per DCS spec */
+	msleep(120);
+
+	ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->panel.dev,
+			"enter_sleep cmd failed ret = %d\n", ret);
+	}
+
+	ret = visionox_rm69299_power_off(ctx);
+
+	ctx->prepared = false;
+	return ret;
+}
+
+static int visionox_rm69299_prepare(struct drm_panel *panel)
+{
+	struct visionox_rm69299 *ctx = panel_to_ctx(panel);
+	int ret;
+
+	if (ctx->prepared)
+		return 0;
+
+	ret = visionox_rm69299_power_on(ctx);
+	if (ret < 0)
+		return ret;
+
+	ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]){ 0xfe, 0x00 }, 2);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->panel.dev,
+			"cmd set tx 0 failed, ret = %d\n", ret);
+		goto power_off;
+	}
+
+	ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]){ 0xc2, 0x08 }, 2);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->panel.dev,
+			"cmd set tx 1 failed, ret = %d\n", ret);
+		goto power_off;
+	}
+
+	ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]){ 0x35, 0x00 }, 2);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->panel.dev,
+			"cmd set tx 2 failed, ret = %d\n", ret);
+		goto power_off;
+	}
+
+	ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]){ 0x51, 0xff }, 2);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->panel.dev,
+			"cmd set tx 3 failed, ret = %d\n", ret);
+		goto power_off;
+	}
+
+	ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->panel.dev,
+			"exit_sleep_mode cmd failed ret = %d\n", ret);
+		goto power_off;
+	}
+
+	/* Per DSI spec wait 120ms after sending exit sleep DCS command */
+	msleep(120);
+
+	ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->panel.dev,
+			"set_display_on cmd failed ret = %d\n", ret);
+		goto power_off;
+	}
+
+	/* Per DSI spec wait 120ms after sending set_display_on DCS command */
+	msleep(120);
+
+	ctx->prepared = true;
+
+	return 0;
+
+power_off:
+	return ret;
+}
+
+static const struct drm_display_mode visionox_rm69299_1080x2248_60hz = {
+        .name = "1080x2248",
+        .clock = 158695,
+        .hdisplay = 1080,
+        .hsync_start = 1080 + 26,
+        .hsync_end = 1080 + 26 + 2,
+        .htotal = 1080 + 26 + 2 + 36,
+        .vdisplay = 2248,
+        .vsync_start = 2248 + 56,
+        .vsync_end = 2248 + 56 + 4,
+        .vtotal = 2248 + 56 + 4 + 4,
+        .vrefresh = 60,
+        .flags = 0,
+};
+
+static int visionox_rm69299_get_modes(struct drm_panel *panel,
+				       struct drm_connector *connector)
+{
+	struct visionox_rm69299 *ctx = panel_to_ctx(panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_create(connector->dev);
+	if (!mode) {
+		DRM_DEV_ERROR(ctx->dev,
+			"failed to create a new display mode\n");
+		return 0;
+	}
+
+	connector->display_info.width_mm = 74;
+	connector->display_info.height_mm = 131;
+	drm_mode_copy(mode, &visionox_rm69299_1080x2248_60hz);
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs visionox_rm69299_drm_funcs = {
+	.unprepare = visionox_rm69299_unprepare,
+	.prepare = visionox_rm69299_prepare,
+	.get_modes = visionox_rm69299_get_modes,
+};
+
+static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct visionox_rm69299 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	ctx->supplies[0].supply = "vdda";
+	ctx->supplies[1].supply = "vdd3p3";
+
+	ret = devm_regulator_bulk_get(ctx->panel.dev, ARRAY_SIZE(ctx->supplies),
+				      ctx->supplies);
+	if (ret < 0)
+		return ret;
+
+	ctx->reset_gpio = devm_gpiod_get(ctx->panel.dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->reset_gpio)) {
+		DRM_DEV_ERROR(dev, "cannot get reset gpio %ld\n",
+			PTR_ERR(ctx->reset_gpio));
+		return PTR_ERR(ctx->reset_gpio);
+	}
+
+	drm_panel_init(&ctx->panel, dev, &visionox_rm69299_drm_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+	ctx->panel.dev = dev;
+	ctx->panel.funcs = &visionox_rm69299_drm_funcs;
+	drm_panel_add(&ctx->panel);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_LPM |
+		MIPI_DSI_CLOCK_NON_CONTINUOUS;
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "dsi attach failed ret = %d\n", ret);
+		goto err_dsi_attach;
+	}
+
+	ret = regulator_set_load(ctx->supplies[0].consumer, 32000);
+	if (ret) {
+		mipi_dsi_detach(dsi);
+		goto err_dsi_attach;
+	}
+
+	ret = regulator_set_load(ctx->supplies[1].consumer, 13200);
+	if (ret) {
+		mipi_dsi_detach(dsi);
+		goto err_dsi_attach;
+	}
+
+	return 0;
+
+err_dsi_attach:
+	drm_panel_remove(&ctx->panel);
+	return ret;
+}
+
+static int visionox_rm69299_remove(struct mipi_dsi_device *dsi)
+{
+	struct visionox_rm69299 *ctx = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(ctx->dsi);
+	mipi_dsi_device_unregister(ctx->dsi);
+
+	drm_panel_remove(&ctx->panel);
+	return 0;
+}
+
+static const struct of_device_id visionox_rm69299_of_match[] = {
+	{
+		.compatible = "visionox,rm69299-1080p-display",
+	},
+};
+MODULE_DEVICE_TABLE(of, visionox_rm69299_of_match);
+
+static struct mipi_dsi_driver visionox_rm69299_driver = {
+	.driver = {
+		.name = "panel-visionox-rm69299",
+		.of_match_table = visionox_rm69299_of_match,
+	},
+	.probe = visionox_rm69299_probe,
+	.remove = visionox_rm69299_remove,
+};
+module_mipi_dsi_driver(visionox_rm69299_driver);
+
+MODULE_DESCRIPTION("Visionox RM69299 DSI Panel Driver");
+MODULE_LICENSE("GPL v2");
+
-- 
2.25.1

Re: [PATCH v6 2/2] drm/panel: add support for rm69299 visionox panel driver

[Matthias Kaehlcke]

Hi,

thanks for re-spinning!

One more comment inline.

On Wed, Mar 11, 2020 at 02:28:07PM +0530, Harigovindan P wrote:

> diff --git a/drivers/gpu/drm/panel/panel-visionox-rm69299.c b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
> new file mode 100644
> index 000000000000..b226723a7543
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
>
> ...
>
> +static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
> +{
> +	struct device *dev = &dsi->dev;
> +	struct visionox_rm69299 *ctx;
> +	int ret;
> +
> +	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> +	if (!ctx)
> +		return -ENOMEM;
> +
> +	mipi_dsi_set_drvdata(dsi, ctx);
> +
> +	ctx->supplies[0].supply = "vdda";
> +	ctx->supplies[1].supply = "vdd3p3";
> +
> +	ret = devm_regulator_bulk_get(ctx->panel.dev, ARRAY_SIZE(ctx->supplies),
> +				      ctx->supplies);
> +	if (ret < 0)
> +		return ret;
> +
> +	ctx->reset_gpio = devm_gpiod_get(ctx->panel.dev, "reset", GPIOD_OUT_LOW);
> +	if (IS_ERR(ctx->reset_gpio)) {
> +		DRM_DEV_ERROR(dev, "cannot get reset gpio %ld\n",
> +			PTR_ERR(ctx->reset_gpio));
> +		return PTR_ERR(ctx->reset_gpio);
> +	}
> +
> +	drm_panel_init(&ctx->panel, dev, &visionox_rm69299_drm_funcs,
> +		       DRM_MODE_CONNECTOR_DSI);
> +	ctx->panel.dev = dev;
> +	ctx->panel.funcs = &visionox_rm69299_drm_funcs;
> +	drm_panel_add(&ctx->panel);
> +
> +	dsi->lanes = 4;
> +	dsi->format = MIPI_DSI_FMT_RGB888;
> +	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_LPM |
> +		MIPI_DSI_CLOCK_NON_CONTINUOUS;
> +	ret = mipi_dsi_attach(dsi);
> +	if (ret < 0) {
> +		DRM_DEV_ERROR(dev, "dsi attach failed ret = %d\n", ret);
> +		goto err_dsi_attach;
> +	}
> +
> +	ret = regulator_set_load(ctx->supplies[0].consumer, 32000);
> +	if (ret) {
> +		mipi_dsi_detach(dsi);
> +		goto err_dsi_attach;
> +	}

the common way to do this kind of unwinding in the kernel would be to add
something like this before 'err_dsi_attach':

err_set_load:
	mipi_dsi_detach(dsi);


and then just do 'goto err_set_load' in the error paths.

> +
> +	ret = regulator_set_load(ctx->supplies[1].consumer, 13200);
> +	if (ret) {
> +		mipi_dsi_detach(dsi);
> +		goto err_dsi_attach;
> +	}
> +
> +	return 0;
> +
> +err_dsi_attach:
> +	drm_panel_remove(&ctx->panel);
> +	return ret;
> +}

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

Re: [PATCH v6 1/2] dt-bindings: display: add visionox rm69299 panel variant

[Rob Herring]

On Wed, 11 Mar 2020 14:28:06 +0530, Harigovindan P wrote:
> Add bindings for visionox rm69299 panel.
> 
> Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
> ---
> 
> Changes in v2:
> 	- Removed unwanted properties from description.
> 	- Creating source files without execute permissions(Rob Herring).
> Changes in v3:
> 	- Changing txt file into yaml
> Changes in v4:
> 	- Updating license identifier.
> 	- Moving yaml file inside panel directory.
> 	- Removing pinctrl entries.
> 	- Adding documentation for reset-gpios.
> Changes in v5:
> 	- No changes. Updated 2/2 Patch.
> Changes in v6:
> 	- Removing patternProperties.
> 	- Added " |" after description.
> 	- Setting port and reset-gpios to true.
> 	- Removing @ae94000 for dsi node.
> 
>  .../display/panel/visionox,rm69299.yaml       | 77 +++++++++++++++++++
>  1 file changed, 77 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/panel/visionox,rm69299.example.dt.yaml: panel@0: 'reg' is a required property

See https://patchwork.ozlabs.org/patch/1252722
Please check and re-submit.