linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Robert Foss <robert.foss@linaro.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	robh+dt@kernel.org, mark.rutland@arm.com,
	catalin.marinas@arm.com, will@kernel.org, shawnguo@kernel.org,
	olof@lixom.net, Anson.Huang@nxp.com, maxime@cerno.tech,
	leonard.crestez@nxp.com, dinguyen@kernel.org,
	marcin.juszkiewicz@linaro.org, linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Loic Poulain <loic.poulain@linaro.org>
Cc: Robert Foss <robert.foss@linaro.org>
Subject: [v1 3/6] arm64: dts: sdm845: Add i2c-qcom-cci node
Date: Wed, 11 Mar 2020 13:34:58 +0100	[thread overview]
Message-ID: <20200311123501.18202-4-robert.foss@linaro.org> (raw)
In-Reply-To: <20200311123501.18202-1-robert.foss@linaro.org>

The sdm845 SOC ships with a CCI controller, which
has two CCI/I2C buses.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts |   4 +
 arch/arm64/boot/dts/qcom/sdm845.dtsi       | 110 +++++++++++++++++++++
 2 files changed, 114 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index eb77aaa6a819..a6b6837c3d68 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -583,3 +583,7 @@
 		bias-pull-up;
 	};
 };
+
+&cci {
+	status = "ok";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index d42302b8889b..b7f5c0b0f6af 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -5,6 +5,7 @@
  * Copyright (c) 2018, The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,camcc-sdm845.h>
 #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
@@ -717,6 +718,14 @@
 			#power-domain-cells = <1>;
 		};
 
+		clock_camcc: clock-controller@ad00000 {
+			compatible = "qcom,sdm845-camcc";
+			reg = <0 0xad00000 0 0x10000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		qfprom@784000 {
 			compatible = "qcom,qfprom";
 			reg = <0 0x00784000 0 0x8ff>;
@@ -1451,6 +1460,60 @@
 			gpio-ranges = <&tlmm 0 0 150>;
 			wakeup-parent = <&pdc_intc>;
 
+			cci0_default: cci0_default {
+				/* SDA, SCL */
+				pinmux {
+					function = "cci_i2c";
+					pins = "gpio17", "gpio18";
+				};
+				pinconf {
+					pins = "gpio17", "gpio18";
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+			};
+
+			cci0_sleep: cci0_sleep {
+				/* SDA, SCL */
+				mux {
+					pins = "gpio17", "gpio18";
+					function = "cci_i2c";
+				};
+
+				config {
+					pins = "gpio17", "gpio18";
+					drive-strength = <2>; /* 2 mA */
+					bias-pull-down;
+				};
+			};
+
+			cci1_default: cci1_default {
+				/* SDA, SCL */
+				pinmux {
+					function = "cci_i2c";
+					pins = "gpio19", "gpio20";
+				};
+				pinconf {
+					pins = "gpio19", "gpio20";
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+			};
+
+			cci1_sleep: cci1_sleep {
+				/* SDA, SCL */
+				mux {
+					pins = "gpio19", "gpio20";
+					function = "cci_i2c";
+				};
+
+				config {
+					pins = "gpio19", "gpio20";
+					drive-strength = <2>; /* 2 mA */
+					bias-pull-down;
+				};
+			};
+
 			qspi_clk: qspi-clk {
 				pinmux {
 					pins = "gpio95";
@@ -2608,6 +2671,53 @@
 			#reset-cells = <1>;
 		};
 
+		cci: cci@ac4a000 {
+			compatible = "qcom,sdm845-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0 0xac4a000 0 0x4000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&clock_camcc TITAN_TOP_GDSC>;
+
+			clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+				<&clock_camcc CAM_CC_SOC_AHB_CLK>,
+				<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				<&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+				<&clock_camcc CAM_CC_CCI_CLK>,
+				<&clock_camcc CAM_CC_CCI_CLK_SRC>;
+			clock-names = "camnoc_axi_clk",
+				"soc_ahb_clk",
+				"slow_ahb_src_clk",
+				"cpas_ahb_clk",
+				"cci",
+				"cci_clk_src";
+
+			assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+				<&clock_camcc CAM_CC_CCI_CLK>;
+			assigned-clock-rates = <80000000>, <37500000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+			status = "disabled";
+
+			i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		mdss: mdss@ae00000 {
 			compatible = "qcom,sdm845-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
-- 
2.20.1


  parent reply	other threads:[~2020-03-11 12:35 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-11 12:34 [v1 0/6] Qualcomm CCI & Camera for db410c & db845c Robert Foss
2020-03-11 12:34 ` [v1 1/6] arm64: dts: msm8916: Add i2c-qcom-cci node Robert Foss
2020-03-12  4:50   ` Bjorn Andersson
2020-03-11 12:34 ` [v1 2/6] arm64: dts: apq8016-sbc: Add CCI/Sensor nodes Robert Foss
2020-03-12  5:03   ` Bjorn Andersson
2020-03-11 12:34 ` Robert Foss [this message]
2020-03-12  5:12   ` [v1 3/6] arm64: dts: sdm845: Add i2c-qcom-cci node Bjorn Andersson
2020-03-11 12:34 ` [v1 4/6] arm64: dts: sdm845-db845c: Add pm_8998 gpio names Robert Foss
2020-03-12  5:13   ` Bjorn Andersson
2020-03-11 12:35 ` [v1 5/6] arm64: dts: sdm845-db845c: Add ov8856 & ov7251 camera nodes Robert Foss
2020-03-12  5:34   ` Bjorn Andersson
2020-03-11 12:35 ` [v1 6/6] arm64: defconfig: Enable QCOM CAMCC, CAMSS and CCI drivers Robert Foss
2020-03-12  5:35   ` Bjorn Andersson
2020-03-17 13:54     ` Robert Foss

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200311123501.18202-4-robert.foss@linaro.org \
    --to=robert.foss@linaro.org \
    --cc=Anson.Huang@nxp.com \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dinguyen@kernel.org \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=loic.poulain@linaro.org \
    --cc=marcin.juszkiewicz@linaro.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime@cerno.tech \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).