* [PATCH] arm64: dts: qcom: sm8250: Add cpufreq hw node
@ 2020-04-15 6:18 Bjorn Andersson
2020-04-20 21:03 ` Bjorn Andersson
0 siblings, 1 reply; 2+ messages in thread
From: Bjorn Andersson @ 2020-04-15 6:18 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Rob Herring
Cc: linux-arm-msm, devicetree, linux-kernel
Add cpufreq HW device node to scale 4-Silver/3-Gold/1-Gold+ cores
on SM8250 SoCs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index d7b2049f339c..e62e77ff48c2 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -41,6 +41,7 @@ CPU0: cpu@0 {
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&L2_0>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
L2_0: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -56,6 +57,7 @@ CPU1: cpu@100 {
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&L2_100>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
L2_100: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -68,6 +70,7 @@ CPU2: cpu@200 {
reg = <0x0 0x200>;
enable-method = "psci";
next-level-cache = <&L2_200>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
L2_200: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -80,6 +83,7 @@ CPU3: cpu@300 {
reg = <0x0 0x300>;
enable-method = "psci";
next-level-cache = <&L2_300>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
L2_300: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -92,6 +96,7 @@ CPU4: cpu@400 {
reg = <0x0 0x400>;
enable-method = "psci";
next-level-cache = <&L2_400>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
L2_400: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -104,6 +109,7 @@ CPU5: cpu@500 {
reg = <0x0 0x500>;
enable-method = "psci";
next-level-cache = <&L2_500>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
L2_500: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -117,6 +123,7 @@ CPU6: cpu@600 {
reg = <0x0 0x600>;
enable-method = "psci";
next-level-cache = <&L2_600>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
L2_600: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -129,6 +136,7 @@ CPU7: cpu@700 {
reg = <0x0 0x700>;
enable-method = "psci";
next-level-cache = <&L2_700>;
+ qcom,freq-domain = <&cpufreq_hw 2>;
L2_700: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -499,6 +507,19 @@ frame@17c2d000 {
};
};
+ cpufreq_hw: cpufreq@18591000 {
+ compatible = "qcom,cpufreq-hw";
+ reg = <0 0x18591000 0 0x1000>,
+ <0 0x18592000 0 0x1000>,
+ <0 0x18593000 0 0x1000>;
+ reg-names = "freq-domain0", "freq-domain1",
+ "freq-domain2";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+ clock-names = "xo", "alternate";
+
+ #freq-domain-cells = <1>;
+ };
};
timer {
--
2.24.0
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH] arm64: dts: qcom: sm8250: Add cpufreq hw node
2020-04-15 6:18 [PATCH] arm64: dts: qcom: sm8250: Add cpufreq hw node Bjorn Andersson
@ 2020-04-20 21:03 ` Bjorn Andersson
0 siblings, 0 replies; 2+ messages in thread
From: Bjorn Andersson @ 2020-04-20 21:03 UTC (permalink / raw)
To: Andy Gross, Rob Herring; +Cc: linux-arm-msm, devicetree, linux-kernel
On Tue 14 Apr 23:18 PDT 2020, Bjorn Andersson wrote:
> Add cpufreq HW device node to scale 4-Silver/3-Gold/1-Gold+ cores
> on SM8250 SoCs.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index d7b2049f339c..e62e77ff48c2 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -41,6 +41,7 @@ CPU0: cpu@0 {
> reg = <0x0 0x0>;
> enable-method = "psci";
> next-level-cache = <&L2_0>;
> + qcom,freq-domain = <&cpufreq_hw 0>;
> L2_0: l2-cache {
> compatible = "cache";
> next-level-cache = <&L3_0>;
> @@ -56,6 +57,7 @@ CPU1: cpu@100 {
> reg = <0x0 0x100>;
> enable-method = "psci";
> next-level-cache = <&L2_100>;
> + qcom,freq-domain = <&cpufreq_hw 0>;
> L2_100: l2-cache {
> compatible = "cache";
> next-level-cache = <&L3_0>;
> @@ -68,6 +70,7 @@ CPU2: cpu@200 {
> reg = <0x0 0x200>;
> enable-method = "psci";
> next-level-cache = <&L2_200>;
> + qcom,freq-domain = <&cpufreq_hw 0>;
> L2_200: l2-cache {
> compatible = "cache";
> next-level-cache = <&L3_0>;
> @@ -80,6 +83,7 @@ CPU3: cpu@300 {
> reg = <0x0 0x300>;
> enable-method = "psci";
> next-level-cache = <&L2_300>;
> + qcom,freq-domain = <&cpufreq_hw 0>;
> L2_300: l2-cache {
> compatible = "cache";
> next-level-cache = <&L3_0>;
> @@ -92,6 +96,7 @@ CPU4: cpu@400 {
> reg = <0x0 0x400>;
> enable-method = "psci";
> next-level-cache = <&L2_400>;
> + qcom,freq-domain = <&cpufreq_hw 1>;
> L2_400: l2-cache {
> compatible = "cache";
> next-level-cache = <&L3_0>;
> @@ -104,6 +109,7 @@ CPU5: cpu@500 {
> reg = <0x0 0x500>;
> enable-method = "psci";
> next-level-cache = <&L2_500>;
> + qcom,freq-domain = <&cpufreq_hw 1>;
> L2_500: l2-cache {
> compatible = "cache";
> next-level-cache = <&L3_0>;
> @@ -117,6 +123,7 @@ CPU6: cpu@600 {
> reg = <0x0 0x600>;
> enable-method = "psci";
> next-level-cache = <&L2_600>;
> + qcom,freq-domain = <&cpufreq_hw 1>;
> L2_600: l2-cache {
> compatible = "cache";
> next-level-cache = <&L3_0>;
> @@ -129,6 +136,7 @@ CPU7: cpu@700 {
> reg = <0x0 0x700>;
> enable-method = "psci";
> next-level-cache = <&L2_700>;
> + qcom,freq-domain = <&cpufreq_hw 2>;
> L2_700: l2-cache {
> compatible = "cache";
> next-level-cache = <&L3_0>;
> @@ -499,6 +507,19 @@ frame@17c2d000 {
> };
> };
>
> + cpufreq_hw: cpufreq@18591000 {
> + compatible = "qcom,cpufreq-hw";
As pointed out by Sibi, SM8250 comes with the new EPSS block for
frequency and voltage scaling, so this is wrong.
Regards,
Bjorn
> + reg = <0 0x18591000 0 0x1000>,
> + <0 0x18592000 0 0x1000>,
> + <0 0x18593000 0 0x1000>;
> + reg-names = "freq-domain0", "freq-domain1",
> + "freq-domain2";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
> + clock-names = "xo", "alternate";
> +
> + #freq-domain-cells = <1>;
> + };
> };
>
> timer {
> --
> 2.24.0
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-04-20 21:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-15 6:18 [PATCH] arm64: dts: qcom: sm8250: Add cpufreq hw node Bjorn Andersson
2020-04-20 21:03 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).