* [PATCH 1/2] dt-bindings: ASoC: qdsp6: Suggest more generic node names
@ 2020-04-15 8:11 Stephan Gerhold
2020-04-15 8:11 ` [PATCH 2/2] dt-bindings: soc: qcom: apr: Use generic node names for APR services Stephan Gerhold
` (3 more replies)
0 siblings, 4 replies; 8+ messages in thread
From: Stephan Gerhold @ 2020-04-15 8:11 UTC (permalink / raw)
To: Rob Herring
Cc: Andy Gross, Bjorn Andersson, Liam Girdwood, Mark Brown,
linux-arm-msm, devicetree, alsa-devel, Stephan Gerhold,
Srinivas Kandagatla
Change the listed examples to use more generic node names, representing
the class of the device nodes:
- apr-service@<id>
- dai@<id>
Both names are already in use in arch/arm64/boot/dts/qcom/sdm845.dtsi.
Also add #address-cells + #size-cells to the q6asm example,
without them the example produces dtc warnings.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
.../devicetree/bindings/sound/qcom,q6adm.txt | 2 +-
.../devicetree/bindings/sound/qcom,q6afe.txt | 46 +++++++++----------
.../devicetree/bindings/sound/qcom,q6asm.txt | 7 ++-
.../devicetree/bindings/sound/qcom,q6core.txt | 2 +-
4 files changed, 30 insertions(+), 27 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
index bbae426cdfb1..15c353a20de8 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
@@ -29,7 +29,7 @@ used by the apr service device.
Definition: Must be 0
= EXAMPLE
-q6adm@8 {
+apr-service@8 {
compatible = "qcom,q6adm";
reg = <APR_SVC_ADM>;
q6routing: routing {
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
index d74888b9f1bb..4916dd6a0896 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
@@ -100,7 +100,7 @@ configuration of each dai. Must contain the following properties.
= EXAMPLE
-q6afe@4 {
+apr-service@4 {
compatible = "qcom,q6afe";
reg = <APR_SVC_AFE>;
@@ -110,12 +110,12 @@ q6afe@4 {
#address-cells = <1>;
#size-cells = <0>;
- hdmi@1 {
- reg = <1>;
+ dai@1 {
+ reg = <HDMI_RX>;
};
- tdm@24 {
- reg = <24>;
+ dai@24 {
+ reg = <PRIMARY_TDM_RX_0>;
qcom,tdm-sync-mode = <1>:
qcom,tdm-sync-src = <1>;
qcom,tdm-data-out = <0>;
@@ -125,8 +125,8 @@ q6afe@4 {
};
- tdm@25 {
- reg = <25>;
+ dai@25 {
+ reg = <PRIMARY_TDM_TX_0>;
qcom,tdm-sync-mode = <1>:
qcom,tdm-sync-src = <1>;
qcom,tdm-data-out = <0>;
@@ -135,43 +135,43 @@ q6afe@4 {
qcom,tdm-data-align = <0>;
};
- prim-mi2s-rx@16 {
- reg = <16>;
+ dai@16 {
+ reg = <PRIMARY_MI2S_RX>;
qcom,sd-lines = <0 2>;
};
- prim-mi2s-tx@17 {
- reg = <17>;
+ dai@17 {
+ reg = <PRIMARY_MI2S_TX>;
qcom,sd-lines = <1>;
};
- sec-mi2s-rx@18 {
- reg = <18>;
+ dai@18 {
+ reg = <SECONDARY_MI2S_RX>;
qcom,sd-lines = <0 3>;
};
- sec-mi2s-tx@19 {
- reg = <19>;
+ dai@19 {
+ reg = <SECONDARY_MI2S_TX>;
qcom,sd-lines = <1>;
};
- tert-mi2s-rx@20 {
- reg = <20>;
+ dai@20 {
+ reg = <TERTIARY_MI2S_RX>;
qcom,sd-lines = <1 3>;
};
- tert-mi2s-tx@21 {
- reg = <21>;
+ dai@21 {
+ reg = <TERTIARY_MI2S_TX>;
qcom,sd-lines = <0>;
};
- quat-mi2s-rx@22 {
- reg = <22>;
+ dai@22 {
+ reg = <QUATERNARY_MI2S_RX>;
qcom,sd-lines = <0>;
};
- quat-mi2s-tx@23 {
- reg = <23>;
+ dai@23 {
+ reg = <QUATERNARY_MI2S_TX>;
qcom,sd-lines = <1>;
};
};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
index 9f5378c51686..6b9a88d0ea3f 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
@@ -51,13 +51,16 @@ configuration of each dai. Must contain the following properties.
= EXAMPLE
-q6asm@7 {
+apr-service@7 {
compatible = "qcom,q6asm";
reg = <APR_SVC_ASM>;
q6asmdai: dais {
compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
#sound-dai-cells = <1>;
- mm@0 {
+
+ dai@0 {
reg = <0>;
direction = <2>;
is-compress-dai;
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.txt b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
index 7f36ff8bec18..5cd4cc9b1fde 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6core.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
@@ -15,7 +15,7 @@ used by the apr service device.
example "qcom,q6core-v2.0"
= EXAMPLE
-q6core@3 {
+apr-service@3 {
compatible = "qcom,q6core";
reg = <APR_SVC_ADSP_CORE>;
};
--
2.26.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] dt-bindings: soc: qcom: apr: Use generic node names for APR services
2020-04-15 8:11 [PATCH 1/2] dt-bindings: ASoC: qdsp6: Suggest more generic node names Stephan Gerhold
@ 2020-04-15 8:11 ` Stephan Gerhold
2020-04-16 7:27 ` Srinivas Kandagatla
` (2 more replies)
2020-04-16 7:27 ` [PATCH 1/2] dt-bindings: ASoC: qdsp6: Suggest more generic node names Srinivas Kandagatla
` (2 subsequent siblings)
3 siblings, 3 replies; 8+ messages in thread
From: Stephan Gerhold @ 2020-04-15 8:11 UTC (permalink / raw)
To: Rob Herring
Cc: Andy Gross, Bjorn Andersson, Liam Girdwood, Mark Brown,
linux-arm-msm, devicetree, alsa-devel, Stephan Gerhold,
Srinivas Kandagatla
Device nodes should be named according to the class of devices
they belong to. Change the suggested names of the subnodes to
apr-service@<id>, which is already in use in
arch/arm64/boot/dts/qcom/sdm845.dtsi.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
.../devicetree/bindings/soc/qcom/qcom,apr.txt | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
index f8fa71f5d84b..2e2f6dc351c0 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
@@ -65,30 +65,30 @@ which uses apr as communication between Apps and QDSP.
compatible = "qcom,apr-v2";
qcom,apr-domain = <APR_DOMAIN_ADSP>;
- q6core@3 {
+ apr-service@3 {
compatible = "qcom,q6core";
reg = <APR_SVC_ADSP_CORE>;
};
- q6afe@4 {
+ apr-service@4 {
compatible = "qcom,q6afe";
reg = <APR_SVC_AFE>;
dais {
#sound-dai-cells = <1>;
- hdmi@1 {
- reg = <1>;
+ dai@1 {
+ reg = <HDMI_RX>;
};
};
};
- q6asm@7 {
+ apr-service@7 {
compatible = "qcom,q6asm";
reg = <APR_SVC_ASM>;
...
};
- q6adm@8 {
+ apr-service@8 {
compatible = "qcom,q6adm";
reg = <APR_SVC_ADM>;
...
@@ -106,26 +106,26 @@ have no such dependency.
qcom,glink-channels = "apr_audio_svc";
qcom,apr-domain = <APR_DOMAIN_ADSP>;
- q6core {
+ apr-service@3 {
compatible = "qcom,q6core";
reg = <APR_SVC_ADSP_CORE>;
};
- q6afe: q6afe {
+ q6afe: apr-service@4 {
compatible = "qcom,q6afe";
reg = <APR_SVC_AFE>;
qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
...
};
- q6asm: q6asm {
+ q6asm: apr-service@7 {
compatible = "qcom,q6asm";
reg = <APR_SVC_ASM>;
qcom,protection-domain = "tms/servreg", "msm/slpi/sensor_pd";
...
};
- q6adm: q6adm {
+ q6adm: apr-service@8 {
compatible = "qcom,q6adm";
reg = <APR_SVC_ADM>;
qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
--
2.26.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] dt-bindings: soc: qcom: apr: Use generic node names for APR services
2020-04-15 8:11 ` [PATCH 2/2] dt-bindings: soc: qcom: apr: Use generic node names for APR services Stephan Gerhold
@ 2020-04-16 7:27 ` Srinivas Kandagatla
2020-04-20 21:55 ` Rob Herring
2020-04-21 1:53 ` Bjorn Andersson
2 siblings, 0 replies; 8+ messages in thread
From: Srinivas Kandagatla @ 2020-04-16 7:27 UTC (permalink / raw)
To: Stephan Gerhold, Rob Herring
Cc: Andy Gross, Bjorn Andersson, Liam Girdwood, Mark Brown,
linux-arm-msm, devicetree, alsa-devel
On 15/04/2020 09:11, Stephan Gerhold wrote:
> Device nodes should be named according to the class of devices
> they belong to. Change the suggested names of the subnodes to
> apr-service@<id>, which is already in use in
> arch/arm64/boot/dts/qcom/sdm845.dtsi.
>
> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> .../devicetree/bindings/soc/qcom/qcom,apr.txt | 20 +++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> index f8fa71f5d84b..2e2f6dc351c0 100644
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> @@ -65,30 +65,30 @@ which uses apr as communication between Apps and QDSP.
> compatible = "qcom,apr-v2";
> qcom,apr-domain = <APR_DOMAIN_ADSP>;
>
> - q6core@3 {
> + apr-service@3 {
> compatible = "qcom,q6core";
> reg = <APR_SVC_ADSP_CORE>;
> };
>
> - q6afe@4 {
> + apr-service@4 {
> compatible = "qcom,q6afe";
> reg = <APR_SVC_AFE>;
>
> dais {
> #sound-dai-cells = <1>;
> - hdmi@1 {
> - reg = <1>;
> + dai@1 {
> + reg = <HDMI_RX>;
> };
> };
> };
>
> - q6asm@7 {
> + apr-service@7 {
> compatible = "qcom,q6asm";
> reg = <APR_SVC_ASM>;
> ...
> };
>
> - q6adm@8 {
> + apr-service@8 {
> compatible = "qcom,q6adm";
> reg = <APR_SVC_ADM>;
> ...
> @@ -106,26 +106,26 @@ have no such dependency.
> qcom,glink-channels = "apr_audio_svc";
> qcom,apr-domain = <APR_DOMAIN_ADSP>;
>
> - q6core {
> + apr-service@3 {
> compatible = "qcom,q6core";
> reg = <APR_SVC_ADSP_CORE>;
> };
>
> - q6afe: q6afe {
> + q6afe: apr-service@4 {
> compatible = "qcom,q6afe";
> reg = <APR_SVC_AFE>;
> qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> ...
> };
>
> - q6asm: q6asm {
> + q6asm: apr-service@7 {
> compatible = "qcom,q6asm";
> reg = <APR_SVC_ASM>;
> qcom,protection-domain = "tms/servreg", "msm/slpi/sensor_pd";
> ...
> };
>
> - q6adm: q6adm {
> + q6adm: apr-service@8 {
> compatible = "qcom,q6adm";
> reg = <APR_SVC_ADM>;
> qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] dt-bindings: ASoC: qdsp6: Suggest more generic node names
2020-04-15 8:11 [PATCH 1/2] dt-bindings: ASoC: qdsp6: Suggest more generic node names Stephan Gerhold
2020-04-15 8:11 ` [PATCH 2/2] dt-bindings: soc: qcom: apr: Use generic node names for APR services Stephan Gerhold
@ 2020-04-16 7:27 ` Srinivas Kandagatla
2020-04-16 15:23 ` Applied "ASoC: qdsp6: Suggest more generic node names" to the asoc tree Mark Brown
2020-04-16 15:34 ` [PATCH 1/2] dt-bindings: ASoC: qdsp6: Suggest more generic node names Mark Brown
3 siblings, 0 replies; 8+ messages in thread
From: Srinivas Kandagatla @ 2020-04-16 7:27 UTC (permalink / raw)
To: Stephan Gerhold, Rob Herring
Cc: Andy Gross, Bjorn Andersson, Liam Girdwood, Mark Brown,
linux-arm-msm, devicetree, alsa-devel
On 15/04/2020 09:11, Stephan Gerhold wrote:
> Change the listed examples to use more generic node names, representing
> the class of the device nodes:
>
> - apr-service@<id>
> - dai@<id>
>
> Both names are already in use in arch/arm64/boot/dts/qcom/sdm845.dtsi.
>
> Also add #address-cells + #size-cells to the q6asm example,
> without them the example produces dtc warnings.
>
> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> .../devicetree/bindings/sound/qcom,q6adm.txt | 2 +-
> .../devicetree/bindings/sound/qcom,q6afe.txt | 46 +++++++++----------
> .../devicetree/bindings/sound/qcom,q6asm.txt | 7 ++-
> .../devicetree/bindings/sound/qcom,q6core.txt | 2 +-
> 4 files changed, 30 insertions(+), 27 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
> index bbae426cdfb1..15c353a20de8 100644
> --- a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
> +++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
> @@ -29,7 +29,7 @@ used by the apr service device.
> Definition: Must be 0
>
> = EXAMPLE
> -q6adm@8 {
> +apr-service@8 {
> compatible = "qcom,q6adm";
> reg = <APR_SVC_ADM>;
> q6routing: routing {
> diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
> index d74888b9f1bb..4916dd6a0896 100644
> --- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
> +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
> @@ -100,7 +100,7 @@ configuration of each dai. Must contain the following properties.
>
> = EXAMPLE
>
> -q6afe@4 {
> +apr-service@4 {
> compatible = "qcom,q6afe";
> reg = <APR_SVC_AFE>;
>
> @@ -110,12 +110,12 @@ q6afe@4 {
> #address-cells = <1>;
> #size-cells = <0>;
>
> - hdmi@1 {
> - reg = <1>;
> + dai@1 {
> + reg = <HDMI_RX>;
> };
>
> - tdm@24 {
> - reg = <24>;
> + dai@24 {
> + reg = <PRIMARY_TDM_RX_0>;
> qcom,tdm-sync-mode = <1>:
> qcom,tdm-sync-src = <1>;
> qcom,tdm-data-out = <0>;
> @@ -125,8 +125,8 @@ q6afe@4 {
>
> };
>
> - tdm@25 {
> - reg = <25>;
> + dai@25 {
> + reg = <PRIMARY_TDM_TX_0>;
> qcom,tdm-sync-mode = <1>:
> qcom,tdm-sync-src = <1>;
> qcom,tdm-data-out = <0>;
> @@ -135,43 +135,43 @@ q6afe@4 {
> qcom,tdm-data-align = <0>;
> };
>
> - prim-mi2s-rx@16 {
> - reg = <16>;
> + dai@16 {
> + reg = <PRIMARY_MI2S_RX>;
> qcom,sd-lines = <0 2>;
> };
>
> - prim-mi2s-tx@17 {
> - reg = <17>;
> + dai@17 {
> + reg = <PRIMARY_MI2S_TX>;
> qcom,sd-lines = <1>;
> };
>
> - sec-mi2s-rx@18 {
> - reg = <18>;
> + dai@18 {
> + reg = <SECONDARY_MI2S_RX>;
> qcom,sd-lines = <0 3>;
> };
>
> - sec-mi2s-tx@19 {
> - reg = <19>;
> + dai@19 {
> + reg = <SECONDARY_MI2S_TX>;
> qcom,sd-lines = <1>;
> };
>
> - tert-mi2s-rx@20 {
> - reg = <20>;
> + dai@20 {
> + reg = <TERTIARY_MI2S_RX>;
> qcom,sd-lines = <1 3>;
> };
>
> - tert-mi2s-tx@21 {
> - reg = <21>;
> + dai@21 {
> + reg = <TERTIARY_MI2S_TX>;
> qcom,sd-lines = <0>;
> };
>
> - quat-mi2s-rx@22 {
> - reg = <22>;
> + dai@22 {
> + reg = <QUATERNARY_MI2S_RX>;
> qcom,sd-lines = <0>;
> };
>
> - quat-mi2s-tx@23 {
> - reg = <23>;
> + dai@23 {
> + reg = <QUATERNARY_MI2S_TX>;
> qcom,sd-lines = <1>;
> };
> };
> diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
> index 9f5378c51686..6b9a88d0ea3f 100644
> --- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
> +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
> @@ -51,13 +51,16 @@ configuration of each dai. Must contain the following properties.
>
> = EXAMPLE
>
> -q6asm@7 {
> +apr-service@7 {
> compatible = "qcom,q6asm";
> reg = <APR_SVC_ASM>;
> q6asmdai: dais {
> compatible = "qcom,q6asm-dais";
> + #address-cells = <1>;
> + #size-cells = <0>;
> #sound-dai-cells = <1>;
> - mm@0 {
> +
> + dai@0 {
> reg = <0>;
> direction = <2>;
> is-compress-dai;
> diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.txt b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
> index 7f36ff8bec18..5cd4cc9b1fde 100644
> --- a/Documentation/devicetree/bindings/sound/qcom,q6core.txt
> +++ b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
> @@ -15,7 +15,7 @@ used by the apr service device.
> example "qcom,q6core-v2.0"
>
> = EXAMPLE
> -q6core@3 {
> +apr-service@3 {
> compatible = "qcom,q6core";
> reg = <APR_SVC_ADSP_CORE>;
> };
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Applied "ASoC: qdsp6: Suggest more generic node names" to the asoc tree
2020-04-15 8:11 [PATCH 1/2] dt-bindings: ASoC: qdsp6: Suggest more generic node names Stephan Gerhold
2020-04-15 8:11 ` [PATCH 2/2] dt-bindings: soc: qcom: apr: Use generic node names for APR services Stephan Gerhold
2020-04-16 7:27 ` [PATCH 1/2] dt-bindings: ASoC: qdsp6: Suggest more generic node names Srinivas Kandagatla
@ 2020-04-16 15:23 ` Mark Brown
2020-04-16 15:34 ` [PATCH 1/2] dt-bindings: ASoC: qdsp6: Suggest more generic node names Mark Brown
3 siblings, 0 replies; 8+ messages in thread
From: Mark Brown @ 2020-04-16 15:23 UTC (permalink / raw)
To: Stephan Gerhold
Cc: alsa-devel, Andy Gross, Bjorn Andersson, devicetree,
Liam Girdwood, linux-arm-msm, Mark Brown, Rob Herring,
Srinivas Kandagatla
The patch
ASoC: qdsp6: Suggest more generic node names
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 35c638d039bbabbca7affb52960d468951d811c1 Mon Sep 17 00:00:00 2001
From: Stephan Gerhold <stephan@gerhold.net>
Date: Wed, 15 Apr 2020 10:11:58 +0200
Subject: [PATCH] ASoC: qdsp6: Suggest more generic node names
Change the listed examples to use more generic node names, representing
the class of the device nodes:
- apr-service@<id>
- dai@<id>
Both names are already in use in arch/arm64/boot/dts/qcom/sdm845.dtsi.
Also add #address-cells + #size-cells to the q6asm example,
without them the example produces dtc warnings.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200415081159.1098-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../devicetree/bindings/sound/qcom,q6adm.txt | 2 +-
.../devicetree/bindings/sound/qcom,q6afe.txt | 46 +++++++++----------
.../devicetree/bindings/sound/qcom,q6asm.txt | 7 ++-
.../devicetree/bindings/sound/qcom,q6core.txt | 2 +-
4 files changed, 30 insertions(+), 27 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
index bbae426cdfb1..15c353a20de8 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
@@ -29,7 +29,7 @@ used by the apr service device.
Definition: Must be 0
= EXAMPLE
-q6adm@8 {
+apr-service@8 {
compatible = "qcom,q6adm";
reg = <APR_SVC_ADM>;
q6routing: routing {
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
index d74888b9f1bb..4916dd6a0896 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
@@ -100,7 +100,7 @@ configuration of each dai. Must contain the following properties.
= EXAMPLE
-q6afe@4 {
+apr-service@4 {
compatible = "qcom,q6afe";
reg = <APR_SVC_AFE>;
@@ -110,12 +110,12 @@ q6afe@4 {
#address-cells = <1>;
#size-cells = <0>;
- hdmi@1 {
- reg = <1>;
+ dai@1 {
+ reg = <HDMI_RX>;
};
- tdm@24 {
- reg = <24>;
+ dai@24 {
+ reg = <PRIMARY_TDM_RX_0>;
qcom,tdm-sync-mode = <1>:
qcom,tdm-sync-src = <1>;
qcom,tdm-data-out = <0>;
@@ -125,8 +125,8 @@ q6afe@4 {
};
- tdm@25 {
- reg = <25>;
+ dai@25 {
+ reg = <PRIMARY_TDM_TX_0>;
qcom,tdm-sync-mode = <1>:
qcom,tdm-sync-src = <1>;
qcom,tdm-data-out = <0>;
@@ -135,43 +135,43 @@ q6afe@4 {
qcom,tdm-data-align = <0>;
};
- prim-mi2s-rx@16 {
- reg = <16>;
+ dai@16 {
+ reg = <PRIMARY_MI2S_RX>;
qcom,sd-lines = <0 2>;
};
- prim-mi2s-tx@17 {
- reg = <17>;
+ dai@17 {
+ reg = <PRIMARY_MI2S_TX>;
qcom,sd-lines = <1>;
};
- sec-mi2s-rx@18 {
- reg = <18>;
+ dai@18 {
+ reg = <SECONDARY_MI2S_RX>;
qcom,sd-lines = <0 3>;
};
- sec-mi2s-tx@19 {
- reg = <19>;
+ dai@19 {
+ reg = <SECONDARY_MI2S_TX>;
qcom,sd-lines = <1>;
};
- tert-mi2s-rx@20 {
- reg = <20>;
+ dai@20 {
+ reg = <TERTIARY_MI2S_RX>;
qcom,sd-lines = <1 3>;
};
- tert-mi2s-tx@21 {
- reg = <21>;
+ dai@21 {
+ reg = <TERTIARY_MI2S_TX>;
qcom,sd-lines = <0>;
};
- quat-mi2s-rx@22 {
- reg = <22>;
+ dai@22 {
+ reg = <QUATERNARY_MI2S_RX>;
qcom,sd-lines = <0>;
};
- quat-mi2s-tx@23 {
- reg = <23>;
+ dai@23 {
+ reg = <QUATERNARY_MI2S_TX>;
qcom,sd-lines = <1>;
};
};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
index 9f5378c51686..6b9a88d0ea3f 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
@@ -51,13 +51,16 @@ configuration of each dai. Must contain the following properties.
= EXAMPLE
-q6asm@7 {
+apr-service@7 {
compatible = "qcom,q6asm";
reg = <APR_SVC_ASM>;
q6asmdai: dais {
compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
#sound-dai-cells = <1>;
- mm@0 {
+
+ dai@0 {
reg = <0>;
direction = <2>;
is-compress-dai;
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.txt b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
index 7f36ff8bec18..5cd4cc9b1fde 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6core.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
@@ -15,7 +15,7 @@ used by the apr service device.
example "qcom,q6core-v2.0"
= EXAMPLE
-q6core@3 {
+apr-service@3 {
compatible = "qcom,q6core";
reg = <APR_SVC_ADSP_CORE>;
};
--
2.20.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] dt-bindings: ASoC: qdsp6: Suggest more generic node names
2020-04-15 8:11 [PATCH 1/2] dt-bindings: ASoC: qdsp6: Suggest more generic node names Stephan Gerhold
` (2 preceding siblings ...)
2020-04-16 15:23 ` Applied "ASoC: qdsp6: Suggest more generic node names" to the asoc tree Mark Brown
@ 2020-04-16 15:34 ` Mark Brown
3 siblings, 0 replies; 8+ messages in thread
From: Mark Brown @ 2020-04-16 15:34 UTC (permalink / raw)
To: Rob Herring, Stephan Gerhold
Cc: devicetree, Liam Girdwood, Bjorn Andersson, alsa-devel,
Andy Gross, linux-arm-msm, Srinivas Kandagatla
On Wed, 15 Apr 2020 10:11:58 +0200, Stephan Gerhold wrote:
> Change the listed examples to use more generic node names, representing
> the class of the device nodes:
>
> - apr-service@<id>
> - dai@<id>
>
> Both names are already in use in arch/arm64/boot/dts/qcom/sdm845.dtsi.
>
> [...]
Applied, thanks!
[1/2] ASoC: qdsp6: Suggest more generic node names
commit: 35c638d039bbabbca7affb52960d468951d811c1
[2/2] dt-bindings: soc: qcom: apr: Use generic node names for APR services
(not applied)
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] dt-bindings: soc: qcom: apr: Use generic node names for APR services
2020-04-15 8:11 ` [PATCH 2/2] dt-bindings: soc: qcom: apr: Use generic node names for APR services Stephan Gerhold
2020-04-16 7:27 ` Srinivas Kandagatla
@ 2020-04-20 21:55 ` Rob Herring
2020-04-21 1:53 ` Bjorn Andersson
2 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2020-04-20 21:55 UTC (permalink / raw)
To: Stephan Gerhold
Cc: Andy Gross, Bjorn Andersson, Liam Girdwood, Mark Brown,
linux-arm-msm, devicetree, alsa-devel, Stephan Gerhold,
Srinivas Kandagatla
On Wed, 15 Apr 2020 10:11:59 +0200, Stephan Gerhold wrote:
> Device nodes should be named according to the class of devices
> they belong to. Change the suggested names of the subnodes to
> apr-service@<id>, which is already in use in
> arch/arm64/boot/dts/qcom/sdm845.dtsi.
>
> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
> ---
> .../devicetree/bindings/soc/qcom/qcom,apr.txt | 20 +++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] dt-bindings: soc: qcom: apr: Use generic node names for APR services
2020-04-15 8:11 ` [PATCH 2/2] dt-bindings: soc: qcom: apr: Use generic node names for APR services Stephan Gerhold
2020-04-16 7:27 ` Srinivas Kandagatla
2020-04-20 21:55 ` Rob Herring
@ 2020-04-21 1:53 ` Bjorn Andersson
2 siblings, 0 replies; 8+ messages in thread
From: Bjorn Andersson @ 2020-04-21 1:53 UTC (permalink / raw)
To: Stephan Gerhold
Cc: Rob Herring, Andy Gross, Liam Girdwood, Mark Brown,
linux-arm-msm, devicetree, alsa-devel, Srinivas Kandagatla
On Wed 15 Apr 01:11 PDT 2020, Stephan Gerhold wrote:
> Device nodes should be named according to the class of devices
> they belong to. Change the suggested names of the subnodes to
> apr-service@<id>, which is already in use in
> arch/arm64/boot/dts/qcom/sdm845.dtsi.
>
> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Applied, thank you.
> ---
> .../devicetree/bindings/soc/qcom/qcom,apr.txt | 20 +++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> index f8fa71f5d84b..2e2f6dc351c0 100644
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> @@ -65,30 +65,30 @@ which uses apr as communication between Apps and QDSP.
> compatible = "qcom,apr-v2";
> qcom,apr-domain = <APR_DOMAIN_ADSP>;
>
> - q6core@3 {
> + apr-service@3 {
> compatible = "qcom,q6core";
> reg = <APR_SVC_ADSP_CORE>;
> };
>
> - q6afe@4 {
> + apr-service@4 {
> compatible = "qcom,q6afe";
> reg = <APR_SVC_AFE>;
>
> dais {
> #sound-dai-cells = <1>;
> - hdmi@1 {
> - reg = <1>;
> + dai@1 {
> + reg = <HDMI_RX>;
> };
> };
> };
>
> - q6asm@7 {
> + apr-service@7 {
> compatible = "qcom,q6asm";
> reg = <APR_SVC_ASM>;
> ...
> };
>
> - q6adm@8 {
> + apr-service@8 {
> compatible = "qcom,q6adm";
> reg = <APR_SVC_ADM>;
> ...
> @@ -106,26 +106,26 @@ have no such dependency.
> qcom,glink-channels = "apr_audio_svc";
> qcom,apr-domain = <APR_DOMAIN_ADSP>;
>
> - q6core {
> + apr-service@3 {
> compatible = "qcom,q6core";
> reg = <APR_SVC_ADSP_CORE>;
> };
>
> - q6afe: q6afe {
> + q6afe: apr-service@4 {
> compatible = "qcom,q6afe";
> reg = <APR_SVC_AFE>;
> qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> ...
> };
>
> - q6asm: q6asm {
> + q6asm: apr-service@7 {
> compatible = "qcom,q6asm";
> reg = <APR_SVC_ASM>;
> qcom,protection-domain = "tms/servreg", "msm/slpi/sensor_pd";
> ...
> };
>
> - q6adm: q6adm {
> + q6adm: apr-service@8 {
> compatible = "qcom,q6adm";
> reg = <APR_SVC_ADM>;
> qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> --
> 2.26.1
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-04-21 1:53 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-15 8:11 [PATCH 1/2] dt-bindings: ASoC: qdsp6: Suggest more generic node names Stephan Gerhold
2020-04-15 8:11 ` [PATCH 2/2] dt-bindings: soc: qcom: apr: Use generic node names for APR services Stephan Gerhold
2020-04-16 7:27 ` Srinivas Kandagatla
2020-04-20 21:55 ` Rob Herring
2020-04-21 1:53 ` Bjorn Andersson
2020-04-16 7:27 ` [PATCH 1/2] dt-bindings: ASoC: qdsp6: Suggest more generic node names Srinivas Kandagatla
2020-04-16 15:23 ` Applied "ASoC: qdsp6: Suggest more generic node names" to the asoc tree Mark Brown
2020-04-16 15:34 ` [PATCH 1/2] dt-bindings: ASoC: qdsp6: Suggest more generic node names Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).