[PATCH AUTOSEL 5.4 03/23] drm/msm/dpu: Fix scale params in plane validation

[PATCH AUTOSEL 5.4 03/23] drm/msm/dpu: Fix scale params in plane validation

[Sasha Levin]

From: Kalyan Thota <kalyan_t@codeaurora.org>

[ Upstream commit 4c978caf08aa155bdeadd9e2d4b026d4ce97ebd0 ]

Plane validation uses an API drm_calc_scale which will
return src/dst value as a scale ratio.

when viewing the range on a scale the values should fall in as

Upscale ratio < Unity scale < Downscale ratio for src/dst formula

Fix the min and max scale ratios to suit the API accordingly.

Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Tested-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 58d5acbcfc5c2..b984bafd27e25 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -853,9 +853,9 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
 		crtc_state = drm_atomic_get_new_crtc_state(state->state,
 							   state->crtc);
 
-	min_scale = FRAC_16_16(1, pdpu->pipe_sblk->maxdwnscale);
+	min_scale = FRAC_16_16(1, pdpu->pipe_sblk->maxupscale);
 	ret = drm_atomic_helper_check_plane_state(state, crtc_state, min_scale,
-					  pdpu->pipe_sblk->maxupscale << 16,
+					  pdpu->pipe_sblk->maxdwnscale << 16,
 					  true, true);
 	if (ret) {
 		DPU_ERROR_PLANE(pdpu, "Check plane state failed (%d)\n", ret);
-- 
2.25.1

[PATCH AUTOSEL 5.4 05/23] tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setup

[Sasha Levin]

From: John Stultz <john.stultz@linaro.org>

[ Upstream commit 975efc66d4e654207c17f939eb737ac591ac38fe ]

When booting with heavily modularized config, the serial console
may not be able to load until after init when modules that
satisfy needed dependencies have time to load.

Unfortunately, as qcom_geni_console_setup is marked as __init,
the function may have been freed before we get to run it,
causing boot time crashes such as:

[    6.469057] Unable to handle kernel paging request at virtual address ffffffe645d4e6cc
[    6.481623] Mem abort info:
[    6.484466]   ESR = 0x86000007
[    6.487557]   EC = 0x21: IABT (current EL), IL = 32 bits
[    6.492929]   SET = 0, FnV = 0g
[    6.496016]   EA = 0, S1PTW = 0
[    6.499202] swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000008151e000
[    6.501286] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[    6.505977] [ffffffe645d4e6cc] pgd=000000017df9f003, p4d=000000017df9f003, pud=000000017df9f003, pmd=000000017df9c003, pte=0000000000000000
[    6.505990] Internal error: Oops: 86000007 [#1] PREEMPT SMP
[    6.505995] Modules linked in: zl10353 zl10039 zl10036 zd1301_demod xc5000 xc4000 ves1x93 ves1820 tuner_xc2028 tuner_simple tuner_types tua9001 tua6100 1
[    6.506152]  isl6405
[    6.518104] ufshcd-qcom 1d84000.ufshc: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
[    6.530549]  horus3a helene fc2580 fc0013 fc0012 fc0011 ec100 e4000 dvb_pll ds3000 drxk drxd drx39xyj dib9000 dib8000 dib7000p dib7000m dib3000mc dibx003
[    6.624271] CPU: 7 PID: 148 Comm: kworker/7:2 Tainted: G        W       5.8.0-mainline-12021-g6defd37ba1cd #3455
[    6.624273] Hardware name: Thundercomm Dragonboard 845c (DT)
[    6.624290] Workqueue: events deferred_probe_work_func
[    6.624296] pstate: 40c00005 (nZcv daif +PAN +UAO BTYPE=--)
[    6.624307] pc : qcom_geni_console_setup+0x0/0x110
[    6.624316] lr : try_enable_new_console+0xa0/0x140
[    6.624318] sp : ffffffc010843a30
[    6.624320] x29: ffffffc010843a30 x28: ffffffe645c3e7d0
[    6.624325] x27: ffffff80f8022180 x26: ffffffc010843b28
[    6.637937] x25: 0000000000000000 x24: ffffffe6462a2000
[    6.637941] x23: ffffffe646398000 x22: 0000000000000000
[    6.637945] x21: 0000000000000000 x20: ffffffe6462a5ce8
[    6.637952] x19: ffffffe646398e38 x18: ffffffffffffffff
[    6.680296] x17: 0000000000000000 x16: ffffffe64492b900
[    6.680300] x15: ffffffe6461e9d08 x14: 69202930203d2064
[    6.680305] x13: 7561625f65736162 x12: 202c363331203d20
[    6.696434] x11: 0000000000000030 x10: 0101010101010101
[    6.696438] x9 : 4d4d20746120304d x8 : 7f7f7f7f7f7f7f7f
[    6.707249] x7 : feff4c524c787373 x6 : 0000000000008080
[    6.707253] x5 : 0000000000000000 x4 : 8080000000000000
[    6.707257] x3 : 0000000000000000 x2 : ffffffe645d4e6cc
[    6.744223] qcom_geni_serial 898000.serial: dev_pm_opp_set_rate: failed to find OPP for freq 102400000 (-34)
[    6.744966] x1 : fffffffefe74e174 x0 : ffffffe6462a5ce8
[    6.753580] qcom_geni_serial 898000.serial: dev_pm_opp_set_rate: failed to find OPP for freq 102400000 (-34)
[    6.761634] Call trace:
[    6.761639]  qcom_geni_console_setup+0x0/0x110
[    6.761645]  register_console+0x29c/0x2f8
[    6.767981] Bluetooth: hci0: Frame reassembly failed (-84)
[    6.775252]  uart_add_one_port+0x438/0x500
[    6.775258]  qcom_geni_serial_probe+0x2c4/0x4a8
[    6.775266]  platform_drv_probe+0x58/0xa8
[    6.855359]  really_probe+0xec/0x398
[    6.855362]  driver_probe_device+0x5c/0xb8
[    6.855367]  __device_attach_driver+0x98/0xb8
[    7.184945]  bus_for_each_drv+0x74/0xd8
[    7.188825]  __device_attach+0xec/0x148
[    7.192705]  device_initial_probe+0x24/0x30
[    7.196937]  bus_probe_device+0x9c/0xa8
[    7.200816]  deferred_probe_work_func+0x7c/0xb8
[    7.205398]  process_one_work+0x20c/0x4b0
[    7.209456]  worker_thread+0x48/0x460
[    7.213157]  kthread+0x14c/0x158
[    7.216432]  ret_from_fork+0x10/0x18
[    7.220049] Code: bad PC value
[    7.223139] ---[ end trace 73f3b21e251d5a70 ]---

Thus this patch removes the __init avoiding crash in such
configs.

Cc: Andy Gross <agross@kernel.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200811025044.70626-1-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/qcom_geni_serial.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index f98a79172ad23..0b184256034fb 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1063,7 +1063,7 @@ static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport)
 }
 
 #ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE
-static int __init qcom_geni_console_setup(struct console *co, char *options)
+static int qcom_geni_console_setup(struct console *co, char *options)
 {
 	struct uart_port *uport;
 	struct qcom_geni_serial_port *port;
-- 
2.25.1

[PATCH AUTOSEL 5.4 06/23] drm/msm: add shutdown support for display platform_driver

[Sasha Levin]

From: Krishna Manikandan <mkrishn@codeaurora.org>

[ Upstream commit 9d5cbf5fe46e350715389d89d0c350d83289a102 ]

Define shutdown callback for display drm driver,
so as to disable all the CRTCS when shutdown
notification is received by the driver.

This change will turn off the timing engine so
that no display transactions are requested
while mmu translations are getting disabled
during reboot sequence.

Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>

Changes in v2:
	- Remove NULL check from msm_pdev_shutdown (Stephen Boyd)
	- Change commit text to reflect when this issue
	  was uncovered (Sai Prakash Ranjan)

Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_drv.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index b73fbb65e14b2..4558d66761b3c 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -1321,6 +1321,13 @@ static int msm_pdev_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void msm_pdev_shutdown(struct platform_device *pdev)
+{
+	struct drm_device *drm = platform_get_drvdata(pdev);
+
+	drm_atomic_helper_shutdown(drm);
+}
+
 static const struct of_device_id dt_match[] = {
 	{ .compatible = "qcom,mdp4", .data = (void *)KMS_MDP4 },
 	{ .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 },
@@ -1332,6 +1339,7 @@ MODULE_DEVICE_TABLE(of, dt_match);
 static struct platform_driver msm_platform_driver = {
 	.probe      = msm_pdev_probe,
 	.remove     = msm_pdev_remove,
+	.shutdown   = msm_pdev_shutdown,
 	.driver     = {
 		.name   = "msm",
 		.of_match_table = dt_match,
-- 
2.25.1

[PATCH AUTOSEL 5.4 09/23] drm/msm: enable vblank during atomic commits

[Sasha Levin]

From: Rob Clark <robdclark@chromium.org>

[ Upstream commit 43906812eaab06423f56af5cca9a9fcdbb4ac454 ]

This has roughly the same effect as drm_atomic_helper_wait_for_vblanks(),
basically just ensuring that vblank accounting is enabled so that we get
valid timestamp/seqn on pageflip events.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_atomic.c | 36 ++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/gpu/drm/msm/msm_atomic.c b/drivers/gpu/drm/msm/msm_atomic.c
index 5ccfad794c6a5..561bfa48841c3 100644
--- a/drivers/gpu/drm/msm/msm_atomic.c
+++ b/drivers/gpu/drm/msm/msm_atomic.c
@@ -27,6 +27,34 @@ int msm_atomic_prepare_fb(struct drm_plane *plane,
 	return msm_framebuffer_prepare(new_state->fb, kms->aspace);
 }
 
+/*
+ * Helpers to control vblanks while we flush.. basically just to ensure
+ * that vblank accounting is switched on, so we get valid seqn/timestamp
+ * on pageflip events (if requested)
+ */
+
+static void vblank_get(struct msm_kms *kms, unsigned crtc_mask)
+{
+	struct drm_crtc *crtc;
+
+	for_each_crtc_mask(kms->dev, crtc, crtc_mask) {
+		if (!crtc->state->active)
+			continue;
+		drm_crtc_vblank_get(crtc);
+	}
+}
+
+static void vblank_put(struct msm_kms *kms, unsigned crtc_mask)
+{
+	struct drm_crtc *crtc;
+
+	for_each_crtc_mask(kms->dev, crtc, crtc_mask) {
+		if (!crtc->state->active)
+			continue;
+		drm_crtc_vblank_put(crtc);
+	}
+}
+
 static void msm_atomic_async_commit(struct msm_kms *kms, int crtc_idx)
 {
 	unsigned crtc_mask = BIT(crtc_idx);
@@ -44,6 +72,8 @@ static void msm_atomic_async_commit(struct msm_kms *kms, int crtc_idx)
 
 	kms->funcs->enable_commit(kms);
 
+	vblank_get(kms, crtc_mask);
+
 	/*
 	 * Flush hardware updates:
 	 */
@@ -58,6 +88,8 @@ static void msm_atomic_async_commit(struct msm_kms *kms, int crtc_idx)
 	kms->funcs->wait_flush(kms, crtc_mask);
 	trace_msm_atomic_wait_flush_finish(crtc_mask);
 
+	vblank_put(kms, crtc_mask);
+
 	mutex_lock(&kms->commit_lock);
 	kms->funcs->complete_commit(kms, crtc_mask);
 	mutex_unlock(&kms->commit_lock);
@@ -221,6 +253,8 @@ void msm_atomic_commit_tail(struct drm_atomic_state *state)
 	 */
 	kms->pending_crtc_mask &= ~crtc_mask;
 
+	vblank_get(kms, crtc_mask);
+
 	/*
 	 * Flush hardware updates:
 	 */
@@ -235,6 +269,8 @@ void msm_atomic_commit_tail(struct drm_atomic_state *state)
 	kms->funcs->wait_flush(kms, crtc_mask);
 	trace_msm_atomic_wait_flush_finish(crtc_mask);
 
+	vblank_put(kms, crtc_mask);
+
 	mutex_lock(&kms->commit_lock);
 	kms->funcs->complete_commit(kms, crtc_mask);
 	mutex_unlock(&kms->commit_lock);
-- 
2.25.1

[PATCH AUTOSEL 5.4 12/23] drm/msm/a6xx: fix gmu start on newer firmware

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit f5749d6181fa7df5ae741788e5d96f593d3a60b6 ]

New Qualcomm firmware has changed a way it reports back the 'started'
event. Support new register values.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
index 9ea748667fab0..40431a09dc97c 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
@@ -199,12 +199,22 @@ static int a6xx_gmu_start(struct a6xx_gmu *gmu)
 {
 	int ret;
 	u32 val;
+	u32 mask, reset_val;
+
+	val = gmu_read(gmu, REG_A6XX_GMU_CM3_DTCM_START + 0xff8);
+	if (val <= 0x20010004) {
+		mask = 0xffffffff;
+		reset_val = 0xbabeface;
+	} else {
+		mask = 0x1ff;
+		reset_val = 0x100;
+	}
 
 	gmu_write(gmu, REG_A6XX_GMU_CM3_SYSRESET, 1);
 	gmu_write(gmu, REG_A6XX_GMU_CM3_SYSRESET, 0);
 
 	ret = gmu_poll_timeout(gmu, REG_A6XX_GMU_CM3_FW_INIT_RESULT, val,
-		val == 0xbabeface, 100, 10000);
+		(val & mask) == reset_val, 100, 10000);
 
 	if (ret)
 		DRM_DEV_ERROR(gmu->dev, "GMU firmware initialization timed out\n");
-- 
2.25.1