[PATCH v2] arm64: dts: qcom: sdm845-db845c: Fix reset-pin of ov8856 node

[PATCH v2] arm64: dts: qcom: sdm845-db845c: Fix reset-pin of ov8856 node

[Robert Foss]

Switch reset pin of ov8856 node from GPIO_ACTIVE_HIGH to GPIO_ACTIVE_LOW,
this issue prevented the ov8856 from probing properly as it did not respon
to I2C messages.

Fixes: d4919a44564b ("arm64: dts: qcom: sdm845-db845c: Add ov8856 & ov7251
camera nodes")

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---

Changes since v1:
 - Bjorn: Use define instead of numeral

 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 7cc236575ee2..f749672c5fdc 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1112,11 +1112,11 @@ camera@10 {
 		reg = <0x10>;
 
 		// CAM0_RST_N
-		reset-gpios = <&tlmm 9 0>;
+		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cam0_default>;
 		gpios = <&tlmm 13 0>,
-			<&tlmm 9 0>;
+			<&tlmm 9 GPIO_ACTIVE_LOW>;
 
 		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
 		clock-names = "xvclk";
-- 
2.27.0

Re: [PATCH v2] arm64: dts: qcom: sdm845-db845c: Fix reset-pin of ov8856 node

[patchwork-bot+linux-arm-msm]

Hello:

This patch was applied to qcom/linux.git (refs/heads/for-next):

On Mon, 21 Dec 2020 11:09:55 +0100 you wrote:
> Switch reset pin of ov8856 node from GPIO_ACTIVE_HIGH to GPIO_ACTIVE_LOW,
> this issue prevented the ov8856 from probing properly as it did not respon
> to I2C messages.
> 
> Fixes: d4919a44564b ("arm64: dts: qcom: sdm845-db845c: Add ov8856 & ov7251
> camera nodes")
> 
> [...]

Here is the summary with links:
  - [v2] arm64: dts: qcom: sdm845-db845c: Fix reset-pin of ov8856 node
    https://git.kernel.org/qcom/c/d4863ef399a2

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html