From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Shawn Guo <shawn.guo@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org
Subject: Re: [PATCH v2] usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot
Date: Thu, 14 Jan 2021 22:02:23 -0600 [thread overview]
Message-ID: <20210115040223.GA1241218@yoga> (raw)
In-Reply-To: <20210115035057.10994-1-shawn.guo@linaro.org>
On Thu 14 Jan 21:50 CST 2021, Shawn Guo wrote:
> For sdm845 ACPI boot, the URS (USB Role Switch) node in ACPI DSDT table
> holds the memory resource, while interrupt resources reside in the child
> nodes USB0 and UFN0. It adds USB0 host support by probing URS node,
> creating platform device for USB0 node, and then retrieve interrupt
> resources from USB0 platform device.
>
This looks reasonable, thanks for updating the search.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
> Changes for v2:
> - Instead of assuming that USB0 is always the first child of URS0, find
> the child using node name.
>
> drivers/usb/dwc3/dwc3-qcom.c | 59 ++++++++++++++++++++++++++++++++++--
> 1 file changed, 56 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index c703d552bbcf..d803ee98c628 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -60,12 +60,14 @@ struct dwc3_acpi_pdata {
> int dp_hs_phy_irq_index;
> int dm_hs_phy_irq_index;
> int ss_phy_irq_index;
> + bool is_urs;
> };
>
> struct dwc3_qcom {
> struct device *dev;
> void __iomem *qscratch_base;
> struct platform_device *dwc3;
> + struct platform_device *urs_usb;
> struct clk **clks;
> int num_clocks;
> struct reset_control *resets;
> @@ -429,13 +431,15 @@ static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom)
> static int dwc3_qcom_get_irq(struct platform_device *pdev,
> const char *name, int num)
> {
> + struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
> + struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb : pdev;
> struct device_node *np = pdev->dev.of_node;
> int ret;
>
> if (np)
> - ret = platform_get_irq_byname(pdev, name);
> + ret = platform_get_irq_byname(pdev_irq, name);
> else
> - ret = platform_get_irq(pdev, num);
> + ret = platform_get_irq(pdev_irq, num);
>
> return ret;
> }
> @@ -568,6 +572,8 @@ static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
> struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
> struct device *dev = &pdev->dev;
> struct resource *res, *child_res = NULL;
> + struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb :
> + pdev;
> int irq;
> int ret;
>
> @@ -597,7 +603,7 @@ static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
> child_res[0].end = child_res[0].start +
> qcom->acpi_pdata->dwc3_core_base_size;
>
> - irq = platform_get_irq(pdev, 0);
> + irq = platform_get_irq(pdev_irq, 0);
> child_res[1].flags = IORESOURCE_IRQ;
> child_res[1].start = child_res[1].end = irq;
>
> @@ -651,6 +657,33 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev)
> return 0;
> }
>
> +static struct platform_device *
> +dwc3_qcom_create_urs_usb_platdev(struct device *dev)
> +{
> + struct fwnode_handle *fwh;
> + struct acpi_device *adev;
> + char name[8];
> + int ret;
> + int id;
> +
> + /* Figure out device id */
> + ret = sscanf(fwnode_get_name(dev->fwnode), "URS%d", &id);
> + if (!ret)
> + return NULL;
> +
> + /* Find the child using name */
> + snprintf(name, sizeof(name), "USB%d", id);
> + fwh = fwnode_get_named_child_node(dev->fwnode, name);
> + if (!fwh)
> + return NULL;
> +
> + adev = to_acpi_device_node(fwh);
> + if (!adev)
> + return NULL;
> +
> + return acpi_create_platform_device(adev, NULL);
> +}
> +
> static int dwc3_qcom_probe(struct platform_device *pdev)
> {
> struct device_node *np = pdev->dev.of_node;
> @@ -715,6 +748,14 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
> qcom->acpi_pdata->qscratch_base_offset;
> parent_res->end = parent_res->start +
> qcom->acpi_pdata->qscratch_base_size;
> +
> + if (qcom->acpi_pdata->is_urs) {
> + qcom->urs_usb = dwc3_qcom_create_urs_usb_platdev(dev);
> + if (!qcom->urs_usb) {
> + dev_err(dev, "failed to create URS USB platdev\n");
> + return -ENODEV;
> + }
> + }
> }
>
> qcom->qscratch_base = devm_ioremap_resource(dev, parent_res);
> @@ -877,8 +918,20 @@ static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
> .ss_phy_irq_index = 2
> };
>
> +static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = {
> + .qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
> + .qscratch_base_size = SDM845_QSCRATCH_SIZE,
> + .dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
> + .hs_phy_irq_index = 1,
> + .dp_hs_phy_irq_index = 4,
> + .dm_hs_phy_irq_index = 3,
> + .ss_phy_irq_index = 2,
> + .is_urs = true,
> +};
> +
> static const struct acpi_device_id dwc3_qcom_acpi_match[] = {
> { "QCOM2430", (unsigned long)&sdm845_acpi_pdata },
> + { "QCOM0304", (unsigned long)&sdm845_acpi_urs_pdata },
> { },
> };
> MODULE_DEVICE_TABLE(acpi, dwc3_qcom_acpi_match);
> --
> 2.17.1
>
next prev parent reply other threads:[~2021-01-15 4:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-15 3:50 [PATCH v2] usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot Shawn Guo
2021-01-15 4:02 ` Bjorn Andersson [this message]
2021-01-15 13:27 ` Felipe Balbi
2021-01-15 14:12 ` Bjorn Andersson
2021-01-18 11:28 ` Felipe Balbi
2021-03-01 19:59 ` patchwork-bot+linux-arm-msm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210115040223.GA1241218@yoga \
--to=bjorn.andersson@linaro.org \
--cc=balbi@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).