linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Robert Foss <robert.foss@linaro.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	robert.foss@linaro.org, todor.too@gmail.com, mchehab@kernel.org,
	robh+dt@kernel.org, angelogioacchino.delregno@somainline.org,
	linux-arm-msm@vger.kernel.org, linux-media@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	AngeloGioacchino Del Regno <kholk11@gmail.com>,
	Sakari Ailus <sakari.ailus@iki.fi>,
	Nicolas Boichat <drinkcat@chromium.org>,
	Andrey Konovalov <andrey.konovalov@linaro.org>
Cc: Rob Herring <robh@kernel.org>, Tomasz Figa <tfiga@chromium.org>,
	Azam Sadiq Pasha Kapatrala Syed <akapatra@quicinc.com>,
	Sarvesh Sridutt <Sarvesh.Sridutt@smartwirelesscompute.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Jonathan Marek <jonathan@marek.ca>
Subject: [PATCH v5 17/22] dt-bindings: media: camss: Add qcom,sdm845-camss binding
Date: Wed, 17 Feb 2021 12:21:17 +0100	[thread overview]
Message-ID: <20210217112122.424236-18-robert.foss@linaro.org> (raw)
In-Reply-To: <20210217112122.424236-1-robert.foss@linaro.org>

Add bindings for qcom,sdm845-camss in order to support the camera
subsystem for SDM845.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---


Changes since v2
 - Rob: Removed extra empty lines at end of file
 - Rob: Add new line at end of file
 - Rob: Remove redundant descriptions
 - Rob: Add power domain description
 - Rob: Make clock-lanes a constant
 - Rob: Rework to conform to new port schema
 - Add max & minItems to data-lanes
 - Remove ports requirement - endpoint & reg
 - Add proper commit message
 - Remove Todor as binding maintainer

Changes since v3
 - Fixed ordering of IRQs

Changes since v4
 - Rob: Added r-b


 .../bindings/media/qcom,sdm845-camss.yaml     | 370 ++++++++++++++++++
 1 file changed, 370 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml

diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
new file mode 100644
index 000000000000..70991b2cd596
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
@@ -0,0 +1,370 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sdm845-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,sdm845-camss
+
+  clocks:
+    minItems: 36
+    maxItems: 36
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: cphy_rx_src
+      - const: csi0
+      - const: csi0_src
+      - const: csi1
+      - const: csi1_src
+      - const: csi2
+      - const: csi2_src
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy0_timer_src
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy1_timer_src
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy2_timer_src
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy3_timer_src
+      - const: gcc_camera_ahb
+      - const: gcc_camera_axi
+      - const: slow_ahb_src
+      - const: soc_ahb
+      - const: vfe0_axi
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe0_src
+      - const: vfe1_axi
+      - const: vfe1
+      - const: vfe1_cphy_rx
+      - const: vfe1_src
+      - const: vfe_lite
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_src
+
+  interrupts:
+    minItems: 10
+    maxItems: 10
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+  reg:
+    minItems: 10
+    maxItems: 10
+
+  reg-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite
+
+  vdda-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interrupt-names
+  - interrupts
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      camss: camss@a00000 {
+        compatible = "qcom,sdm845-camss";
+
+        clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+          <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+          <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
+          <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
+          <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
+          <&clock_camcc CAM_CC_CSIPHY0_CLK>,
+          <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
+          <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
+          <&clock_camcc CAM_CC_CSIPHY1_CLK>,
+          <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
+          <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
+          <&clock_camcc CAM_CC_CSIPHY2_CLK>,
+          <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
+          <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
+          <&clock_camcc CAM_CC_CSIPHY3_CLK>,
+          <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
+          <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>,
+          <&gcc GCC_CAMERA_AHB_CLK>,
+          <&gcc GCC_CAMERA_AXI_CLK>,
+          <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+          <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
+          <&clock_camcc CAM_CC_IFE_1_CLK>,
+          <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+          <&clock_camcc CAM_CC_IFE_1_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_LITE_CLK>,
+          <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+          <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>;
+
+        clock-names = "camnoc_axi",
+          "cpas_ahb",
+          "cphy_rx_src",
+          "csi0",
+          "csi0_src",
+          "csi1",
+          "csi1_src",
+          "csi2",
+          "csi2_src",
+          "csiphy0",
+          "csiphy0_timer",
+          "csiphy0_timer_src",
+          "csiphy1",
+          "csiphy1_timer",
+          "csiphy1_timer_src",
+          "csiphy2",
+          "csiphy2_timer",
+          "csiphy2_timer_src",
+          "csiphy3",
+          "csiphy3_timer",
+          "csiphy3_timer_src",
+          "gcc_camera_ahb",
+          "gcc_camera_axi",
+          "slow_ahb_src",
+          "soc_ahb",
+          "vfe0_axi",
+          "vfe0",
+          "vfe0_cphy_rx",
+          "vfe0_src",
+          "vfe1_axi",
+          "vfe1",
+          "vfe1_cphy_rx",
+          "vfe1_src",
+          "vfe_lite",
+          "vfe_lite_cphy_rx",
+          "vfe_lite_src";
+
+        interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+
+        interrupt-names = "csid0",
+          "csid1",
+          "csid2",
+          "csiphy0",
+          "csiphy1",
+          "csiphy2",
+          "csiphy3",
+          "vfe0",
+          "vfe1",
+          "vfe_lite";
+
+        iommus = <&apps_smmu 0x0808 0x0>,
+          <&apps_smmu 0x0810 0x8>,
+          <&apps_smmu 0x0c08 0x0>,
+          <&apps_smmu 0x0c10 0x8>;
+
+        power-domains = <&clock_camcc IFE_0_GDSC>,
+          <&clock_camcc IFE_1_GDSC>,
+          <&clock_camcc TITAN_TOP_GDSC>;
+
+        reg = <0 0xacb3000 0 0x1000>,
+          <0 0xacba000 0 0x1000>,
+          <0 0xacc8000 0 0x1000>,
+          <0 0xac65000 0 0x1000>,
+          <0 0xac66000 0 0x1000>,
+          <0 0xac67000 0 0x1000>,
+          <0 0xac68000 0 0x1000>,
+          <0 0xacaf000 0 0x4000>,
+          <0 0xacb6000 0 0x4000>,
+          <0 0xacc4000 0 0x4000>;
+
+        reg-names = "csid0",
+          "csid1",
+          "csid2",
+          "csiphy0",
+          "csiphy1",
+          "csiphy2",
+          "csiphy3",
+          "vfe0",
+          "vfe1",
+          "vfe_lite";
+
+        vdda-supply = <&reg_2v8>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+        };
+      };
+    };
-- 
2.27.0


  parent reply	other threads:[~2021-02-17 11:29 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-17 11:21 [PATCH v5 00/22] Add support for the SDM845 Camera Subsystem Robert Foss
2021-02-17 11:21 ` [PATCH v5 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
2021-02-19 21:05   ` Nicolas Dufresne
2021-02-22 10:51     ` Robert Foss
2021-02-20 18:44   ` Andrey Konovalov
2021-02-17 11:21 ` [PATCH v5 02/22] media: camss: Fix vfe_isr comment typo Robert Foss
2021-02-17 11:21 ` [PATCH v5 03/22] media: camss: Replace trace_printk() with dev_dbg() Robert Foss
2021-02-17 11:21 ` [PATCH v5 04/22] media: camss: Add CAMSS_845 camss version Robert Foss
2021-02-20 18:42   ` Andrey Konovalov
2021-02-17 11:21 ` [PATCH v5 05/22] media: camss: Make ISPIF subdevice optional Robert Foss
2021-02-18 19:49   ` Andrey Konovalov
2021-02-17 11:21 ` [PATCH v5 07/22] media: camss: Add support for VFE hardware version Titan 170 Robert Foss
2021-02-20 21:40   ` Andrey Konovalov
2021-02-22 16:37     ` Robert Foss
2021-02-22 17:06       ` Andrey Konovalov
2021-02-22 17:21         ` Robert Foss
2021-02-22 17:24           ` Andrey Konovalov
2021-02-20 21:40   ` Andrey Konovalov
2021-02-17 11:21 ` [PATCH v5 08/22] media: camss: Add missing format identifiers Robert Foss
2021-02-22 16:26   ` Andrey Konovalov
2021-02-23 17:25     ` Robert Foss
2021-02-17 11:21 ` [PATCH v5 09/22] media: camss: Refactor CSID HW version support Robert Foss
2021-02-21 15:15   ` Andrey Konovalov
2021-02-21 17:50     ` Andrey Konovalov
2021-02-22 18:13       ` Robert Foss
2021-02-17 11:21 ` [PATCH v5 10/22] media: camss: Add support for CSID hardware version Titan 170 Robert Foss
2021-02-21 17:14   ` Andrey Konovalov
2021-02-22 17:06     ` Robert Foss
2021-02-17 11:21 ` [PATCH v5 11/22] media: camss: Add support for CSIPHY " Robert Foss
2021-02-21 18:17   ` Andrey Konovalov
2021-02-23  9:36     ` Robert Foss
2021-02-17 11:21 ` [PATCH v5 12/22] media: camss: Remove per VFE power domain toggling Robert Foss
2021-02-22 11:44   ` Andrey Konovalov
2021-02-24 14:53     ` Robert Foss
2021-02-17 11:21 ` [PATCH v5 13/22] media: camss: Enable SDM845 Robert Foss
2021-02-21 18:32   ` Andrey Konovalov
2021-02-17 11:21 ` [PATCH v5 14/22] dt-bindings: media: camss: Add qcom,msm8916-camss binding Robert Foss
2021-02-17 11:21 ` [PATCH v5 15/22] dt-bindings: media: camss: Add qcom,msm8996-camss binding Robert Foss
2021-02-17 11:21 ` [PATCH v5 16/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding Robert Foss
2021-02-17 11:21 ` Robert Foss [this message]
2021-02-17 11:21 ` [PATCH v5 18/22] MAINTAINERS: Change CAMSS documentation to use dtschema bindings Robert Foss
2021-02-17 11:21 ` [PATCH v5 19/22] media: dt-bindings: media: Remove qcom,camss documentation Robert Foss
2021-02-17 11:21 ` [PATCH v5 20/22] arm64: dts: sdm845: Add CAMSS ISP node Robert Foss
2021-02-21 18:39   ` Andrey Konovalov
2021-02-17 11:21 ` [PATCH v5 21/22] arm64: dts: sdm845-db845c: Configure regulators for camss node Robert Foss
2021-02-21 18:39   ` Andrey Konovalov
2021-02-17 11:21 ` [PATCH v5 22/22] arm64: dts: sdm845-db845c: Enable ov8856 sensor and connect to ISP Robert Foss
2021-02-21 18:39   ` Andrey Konovalov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210217112122.424236-18-robert.foss@linaro.org \
    --to=robert.foss@linaro.org \
    --cc=Sarvesh.Sridutt@smartwirelesscompute.com \
    --cc=agross@kernel.org \
    --cc=akapatra@quicinc.com \
    --cc=andrey.konovalov@linaro.org \
    --cc=angelogioacchino.delregno@somainline.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=drinkcat@chromium.org \
    --cc=jonathan@marek.ca \
    --cc=kholk11@gmail.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=sakari.ailus@iki.fi \
    --cc=tfiga@chromium.org \
    --cc=todor.too@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).