[PATCH v5 22/22] arm64: dts: sdm845-db845c: Enable ov8856 sensor and connect to ISP

From: Robert Foss <robert.foss@linaro.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	robert.foss@linaro.org, todor.too@gmail.com, mchehab@kernel.org,
	robh+dt@kernel.org, angelogioacchino.delregno@somainline.org,
	linux-arm-msm@vger.kernel.org, linux-media@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	AngeloGioacchino Del Regno <kholk11@gmail.com>,
	Sakari Ailus <sakari.ailus@iki.fi>,
	Nicolas Boichat <drinkcat@chromium.org>,
	Andrey Konovalov <andrey.konovalov@linaro.org>
Cc: Rob Herring <robh@kernel.org>, Tomasz Figa <tfiga@chromium.org>,
	Azam Sadiq Pasha Kapatrala Syed <akapatra@quicinc.com>,
	Sarvesh Sridutt <Sarvesh.Sridutt@smartwirelesscompute.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Jonathan Marek <jonathan@marek.ca>
Subject: [PATCH v5 22/22] arm64: dts: sdm845-db845c: Enable ov8856 sensor and connect to ISP
Date: Wed, 17 Feb 2021 12:21:22 +0100	[thread overview]
Message-ID: <20210217112122.424236-23-robert.foss@linaro.org> (raw)
In-Reply-To: <20210217112122.424236-1-robert.foss@linaro.org>

Enable camss & ov8856 DT nodes.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---

Changes since v1
 - Laurent: Fix subject
 - Laurent: Remove redundant regulator labels
 - Laurent: Remove empty line

Changes since v3
 - Fixed ordering of IRQs
 - Add newlines for better readability

 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 5842ab65789c..d89286f6aacb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1108,6 +1108,21 @@ &cci {
 
 &camss {
 	vdda-supply = <&vreg_l1a_0p875>;
+
+	status = "ok";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			csiphy0_ep: endpoint {
+				clock-lanes = <1>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&ov8856_ep>;
+			};
+		};
+	};
 };
 
 &cci_i2c0 {
@@ -1139,7 +1154,7 @@ camera@10 {
 		avdd-supply = <&cam0_avdd_2v8>;
 		dvdd-supply = <&cam0_dvdd_1v2>;
 
-		status = "disable";
+		status = "ok";
 
 		port {
 			ov8856_ep: endpoint {
@@ -1147,7 +1162,7 @@ ov8856_ep: endpoint {
 				link-frequencies = /bits/ 64
 					<360000000 180000000>;
 				data-lanes = <1 2 3 4>;
-//				remote-endpoint = <&csiphy0_ep>;
+				remote-endpoint = <&csiphy0_ep>;
 			};
 		};
 	};
-- 
2.27.0

