Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] remoteproc: qcom: wcnss: Allow specifying firmware-name
@ 2020-01-08  5:52 Bjorn Andersson
  2020-01-08 20:24 ` Mathieu Poirier
  2021-02-17 22:20 ` Aníbal Limón
  0 siblings, 2 replies; 3+ messages in thread
From: Bjorn Andersson @ 2020-01-08  5:52 UTC (permalink / raw)
  To: Ohad Ben-Cohen, Bjorn Andersson, Rob Herring, Mark Rutland
  Cc: linux-arm-msm, linux-remoteproc, devicetree, linux-kernel

Introduce a firmware-name property, in order to be able to support
device/platform specific firmware for the wireless connectivity
subsystem; in line with other Qualcomm remoteproc drivers.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 .../devicetree/bindings/remoteproc/qcom,wcnss-pil.txt     | 6 ++++++
 drivers/remoteproc/qcom_wcnss.c                           | 8 +++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
index d420f84ddfb0..00844a5d2ccf 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
@@ -34,6 +34,12 @@ on the Qualcomm WCNSS core.
 	Definition: should be "wdog", "fatal", optionally followed by "ready",
 		    "handover", "stop-ack"
 
+- firmware-name:
+	Usage: optional
+	Value type: <string>
+	Definition: must list the relative firmware image path for the
+		    WCNSS core.
+
 - vddmx-supply:
 - vddcx-supply:
 - vddpx-supply:
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index dc135754bb9c..a0468b3cc76f 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -457,6 +457,7 @@ static int wcnss_alloc_memory_region(struct qcom_wcnss *wcnss)
 
 static int wcnss_probe(struct platform_device *pdev)
 {
+	const char *fw_name = WCNSS_FIRMWARE_NAME;
 	const struct wcnss_data *data;
 	struct qcom_wcnss *wcnss;
 	struct resource *res;
@@ -474,8 +475,13 @@ static int wcnss_probe(struct platform_device *pdev)
 		return -ENXIO;
 	}
 
+	ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
+				      &fw_name);
+	if (ret < 0 && ret != -EINVAL)
+		return ret;
+
 	rproc = rproc_alloc(&pdev->dev, pdev->name, &wcnss_ops,
-			    WCNSS_FIRMWARE_NAME, sizeof(*wcnss));
+			    fw_name, sizeof(*wcnss));
 	if (!rproc) {
 		dev_err(&pdev->dev, "unable to allocate remoteproc\n");
 		return -ENOMEM;
-- 
2.24.0


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] remoteproc: qcom: wcnss: Allow specifying firmware-name
  2020-01-08  5:52 [PATCH] remoteproc: qcom: wcnss: Allow specifying firmware-name Bjorn Andersson
@ 2020-01-08 20:24 ` Mathieu Poirier
  2021-02-17 22:20 ` Aníbal Limón
  1 sibling, 0 replies; 3+ messages in thread
From: Mathieu Poirier @ 2020-01-08 20:24 UTC (permalink / raw)
  To: Bjorn Andersson
  Cc: Ohad Ben-Cohen, Rob Herring, Mark Rutland, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel

Hi Bjorn,

On Tue, Jan 07, 2020 at 09:52:52PM -0800, Bjorn Andersson wrote:
> Introduce a firmware-name property, in order to be able to support
> device/platform specific firmware for the wireless connectivity
> subsystem; in line with other Qualcomm remoteproc drivers.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  .../devicetree/bindings/remoteproc/qcom,wcnss-pil.txt     | 6 ++++++
>  drivers/remoteproc/qcom_wcnss.c                           | 8 +++++++-
>  2 files changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
> index d420f84ddfb0..00844a5d2ccf 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
> @@ -34,6 +34,12 @@ on the Qualcomm WCNSS core.
>  	Definition: should be "wdog", "fatal", optionally followed by "ready",
>  		    "handover", "stop-ack"
>  
> +- firmware-name:
> +	Usage: optional
> +	Value type: <string>
> +	Definition: must list the relative firmware image path for the
> +		    WCNSS core.

Perhaps mention that if omitted the firmware name will default to "wcnss.mdt".

> +
>  - vddmx-supply:
>  - vddcx-supply:
>  - vddpx-supply:
> diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
> index dc135754bb9c..a0468b3cc76f 100644
> --- a/drivers/remoteproc/qcom_wcnss.c
> +++ b/drivers/remoteproc/qcom_wcnss.c
> @@ -457,6 +457,7 @@ static int wcnss_alloc_memory_region(struct qcom_wcnss *wcnss)
>  
>  static int wcnss_probe(struct platform_device *pdev)
>  {
> +	const char *fw_name = WCNSS_FIRMWARE_NAME;
>  	const struct wcnss_data *data;
>  	struct qcom_wcnss *wcnss;
>  	struct resource *res;
> @@ -474,8 +475,13 @@ static int wcnss_probe(struct platform_device *pdev)
>  		return -ENXIO;
>  	}
>  
> +	ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
> +				      &fw_name);
> +	if (ret < 0 && ret != -EINVAL)
> +		return ret;
> +
>  	rproc = rproc_alloc(&pdev->dev, pdev->name, &wcnss_ops,
> -			    WCNSS_FIRMWARE_NAME, sizeof(*wcnss));
> +			    fw_name, sizeof(*wcnss));
>  	if (!rproc) {
>  		dev_err(&pdev->dev, "unable to allocate remoteproc\n");
>  		return -ENOMEM;

That is in line with what was done for q6v5_mss and q6v5_pas.  With or without
the above:

Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>

> -- 
> 2.24.0
> 

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH] remoteproc: qcom: wcnss: Allow specifying firmware-name
  2020-01-08  5:52 [PATCH] remoteproc: qcom: wcnss: Allow specifying firmware-name Bjorn Andersson
  2020-01-08 20:24 ` Mathieu Poirier
@ 2021-02-17 22:20 ` Aníbal Limón
  1 sibling, 0 replies; 3+ messages in thread
From: Aníbal Limón @ 2021-02-17 22:20 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: devicetree, linux-arm-msm, linux-kernel, linux-remoteproc,
	mark.rutland, ohad, robh+dt, Aníbal Limón

From: Bjorn Andersson <bjorn.andersson@linaro.org>

Introduce a firmware-name property, in order to be able to support
device/platform specific firmware for the wireless connectivity
subsystem; in line with other Qualcomm remoteproc drivers.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Aníbal Limón <anibal.limon@linaro.org>
---
 .../devicetree/bindings/remoteproc/qcom,wcnss-pil.txt     | 6 ++++++
 drivers/remoteproc/qcom_wcnss.c                           | 8 +++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
index d420f84ddfb0..00844a5d2ccf 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
@@ -34,6 +34,12 @@ on the Qualcomm WCNSS core.
 	Definition: should be "wdog", "fatal", optionally followed by "ready",
 		    "handover", "stop-ack"
 
+- firmware-name:
+	Usage: optional
+	Value type: <string>
+	Definition: must list the relative firmware image path for the
+		    WCNSS core.
+
 - vddmx-supply:
 - vddcx-supply:
 - vddpx-supply:
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index e2573f79a137..ef80f5b8f20b 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -465,6 +465,7 @@ static int wcnss_alloc_memory_region(struct qcom_wcnss *wcnss)
 
 static int wcnss_probe(struct platform_device *pdev)
 {
+	const char *fw_name = WCNSS_FIRMWARE_NAME;
 	const struct wcnss_data *data;
 	struct qcom_wcnss *wcnss;
 	struct resource *res;
@@ -482,8 +483,13 @@ static int wcnss_probe(struct platform_device *pdev)
 		return -ENXIO;
 	}
 
+	ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
+				      &fw_name);
+	if (ret < 0 && ret != -EINVAL)
+		return ret;
+
 	rproc = rproc_alloc(&pdev->dev, pdev->name, &wcnss_ops,
-			    WCNSS_FIRMWARE_NAME, sizeof(*wcnss));
+			    fw_name, sizeof(*wcnss));
 	if (!rproc) {
 		dev_err(&pdev->dev, "unable to allocate remoteproc\n");
 		return -ENOMEM;
-- 
2.30.0


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-08  5:52 [PATCH] remoteproc: qcom: wcnss: Allow specifying firmware-name Bjorn Andersson
2020-01-08 20:24 ` Mathieu Poirier
2021-02-17 22:20 ` Aníbal Limón

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git