Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
* [GIT PULL] More Qualcomm DTS updates for 5.13
@ 2021-04-19 15:09 Bjorn Andersson
  0 siblings, 0 replies; only message in thread
From: Bjorn Andersson @ 2021-04-19 15:09 UTC (permalink / raw)
  To: arm, soc
  Cc: linux-arm-msm, linux-arm-kernel, Andy Gross, Arnd Bergmann,
	Olof Johansson, Kevin Hilman, Manivannan Sadhasivam, Alex Elder

The following changes since commit 885aae6860fae1eed38f5cc1ac09a40e4896a38c:

  ARM: dts: qcom: msm8974-klte: Add bluetooth support (2021-04-06 11:53:16 -0500)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-dts-for-5.13-2

for you to fetch changes up to 06ad53efeb496d8841169ec0919ba6852c7852f6:

  ARM: dts: qcom: sdx55: add IPA information (2021-04-13 21:35:56 -0500)

----------------------------------------------------------------
More Qualcomm DTS updates for 5.13

This adds CPUfreq, interconnect providers, IPC, remoteproc and IPA to
the SDX55 platform and then adds board files for the Telit FN980 TLB and
Thundercomm TurboX T55.

----------------------------------------------------------------
Alex Elder (1):
      ARM: dts: qcom: sdx55: add IPA information

Manivannan Sadhasivam (14):
      ARM: dts: qcom: sdx55: Add support for A7 PLL clock
      ARM: dts: qcom: sdx55: Add support for APCS block
      ARM: dts: qcom: sdx55: Add CPUFreq support
      ARM: dts: qcom: sdx55: Add modem SMP2P node
      ARM: dts: qcom: sdx55: Add IMEM and PIL info region
      dt-bindings: firmware: scm: Add compatible for SDX55
      ARM: dts: qcom: sdx55: Add SCM node
      ARM: dts: qcom: sdx55: Add interconnect nodes
      ARM: dts: qcom: Fix node name for NAND controller node
      ARM: dts: qcom: sdx55: Add Modem remoteproc node
      dt-bindings: arm: qcom: Add binding for Telit FN980 TLB board
      ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLB
      dt-bindings: arm: qcom: Add binding for Thundercomm T55 kit
      ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55

 Documentation/devicetree/bindings/arm/qcom.yaml    |   2 +
 .../devicetree/bindings/firmware/qcom,scm.txt      |   1 +
 arch/arm/boot/dts/Makefile                         |   4 +-
 arch/arm/boot/dts/qcom-ipq4019.dtsi                |   2 +-
 arch/arm/boot/dts/qcom-sdx55-t55.dts               | 281 ++++++++++++++++++++
 arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts   | 282 +++++++++++++++++++++
 arch/arm/boot/dts/qcom-sdx55.dtsi                  | 207 ++++++++++++++-
 7 files changed, 776 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/boot/dts/qcom-sdx55-t55.dts
 create mode 100644 arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-19 15:09 [GIT PULL] More Qualcomm DTS updates for 5.13 Bjorn Andersson

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git