linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v16 1/4] dt-bindings: msm: disp: add yaml schemas for DPU bindings
@ 2021-05-18 10:03 Krishna Manikandan
  2021-05-18 10:03 ` [PATCH v16 2/4] dt-bindings: msm: dsi: add yaml schemas for DSI bindings Krishna Manikandan
                   ` (3 more replies)
  0 siblings, 4 replies; 8+ messages in thread
From: Krishna Manikandan @ 2021-05-18 10:03 UTC (permalink / raw)
  To: dri-devel, linux-arm-msm, freedreno, devicetree, linux-kernel
  Cc: Krishna Manikandan, kalyan_t, tanmay, abhinavk, robdclark,
	swboyd, bjorn.andersson, vinod.koul, dianders, khsieh, robh+dt,
	sean, robh

MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks
like DPU display controller, DSI etc. Add YAML schema
for DPU device tree bindings.

Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>

Changes in v2:
    - Changed dpu to DPU (Sam Ravnborg)
    - Fixed indentation issues (Sam Ravnborg)
    - Added empty line between different properties (Sam Ravnborg)
    - Replaced reference txt files with  their corresponding
      yaml files (Sam Ravnborg)
    - Modified the file to use "|" only when it is
      necessary (Sam Ravnborg)

Changes in v3:
    - Corrected the license used (Rob Herring)
    - Added maxItems for properties (Rob Herring)
    - Dropped generic descriptions (Rob Herring)
    - Added ranges property (Rob Herring)
    - Corrected the indendation (Rob Herring)
    - Added additionalProperties (Rob Herring)
    - Split dsi file into two, one for dsi controller
      and another one for dsi phy per target (Rob Herring)
    - Corrected description for pinctrl-names (Rob Herring)
    - Corrected the examples used in yaml file (Rob Herring)
    - Delete dsi.txt and dpu.txt (Rob Herring)

Changes in v4:
    - Move schema up by one level (Rob Herring)
    - Add patternProperties for mdp node (Rob Herring)
    - Corrected description of some properties (Rob Herring)

Changes in v5:
    - Correct the indentation (Rob Herring)
    - Remove unnecessary description from properties (Rob Herring)
    - Correct the number of interconnect entries (Rob Herring)
    - Add interconnect names for sc7180 (Rob Herring)
    - Add description for ports (Rob Herring)
    - Remove common properties (Rob Herring)
    - Add unevalutatedProperties (Rob Herring)
    - Reference existing dsi controller yaml in the common
      dsi controller file (Rob Herring)
    - Correct the description of clock names to include only the
      clocks that are required (Rob Herring)
    - Remove properties which are already covered under the common
      binding (Rob Herring)
    - Add dsi phy supply nodes which are required for sc7180 and
      sdm845 targets (Rob Herring)
    - Add type ref for syscon-sfpb (Rob Herring)

Changes in v6:
    - Fixed errors during dt_binding_check (Rob Herring)
    - Add maxItems for phys and phys-names (Rob Herring)
    - Use unevaluatedProperties wherever required (Rob Herring)
    - Removed interrupt controller from required properties for
      dsi controller (Rob Herring)
    - Add constraints for dsi-phy reg-names based on the compatible
      phy version (Rob Herring)
    - Add constraints for dsi-phy supply nodes based on the
      compatible phy version (Rob Herring)

Changes in v7:
    - Add default value for qcom,mdss-mdp-transfer-time-us (Rob Herring)
    - Modify the schema for data-lanes (Rob Herring)
    - Split the phy schema into separate schemas based on
      the phy version (Rob Herring)

Changes in v8:
    - Resolve merge conflicts with latest dsi.txt file
    - Include dp yaml change also in the same series

Changes in v9:
    - Combine target specific dsi controller yaml files
      to a single yaml file (Rob Herring)
    - Combine target specific dsi phy yaml files into a
      single yaml file (Rob Herring)
    - Use unevaluatedProperties and additionalProperties
      wherever required
    - Remove duplicate properties from common yaml files

Changes in v10:
    - Split the patch into separate patches for DPU, DSI and
      PHY (Stephen Boyd)
    - Drop unnecessary fullstop (Stephen Boyd)
    - Add newline whereever required (Stephen Boyd)
    - Add description for clock used (Stephen Boyd)
    - Modify the description for interconnect entries  (Stephen Boyd)
    - Drop assigned clock entries as it a generic property (Stephen Boyd)
    - Correct the definition for interrupts (Stephen Boyd)
    - Drop clock names from required properties (Stephen Boyd)
    - Drop labels for display nodes from example (Stephen Boyd)
    - Drop flags from interrupts entries (Stephen Boyd)

Changes in v11:
    - Drop maxItems for clocks (Stephen Boyd)

Changes in v12:
    - Add description for register property (Stephen Boyd)
    - Add maxItems for interrupts (Stephen Boyd)
    - Add description for iommus property (Stephen Boyd)
    - Add description for interconnects (Stephen Boyd)
    - Change display node name to display_controller (Stephen Boyd)

Changes in v13:
    - Add maxItems for reg property (Stephen Boyd)
    - Add ranges property in example (Stephen Boyd)
    - Modify description for iommus property (Stephen Boyd)
    - Add Dp bindings for ports in the same patch (Stephen Boyd)
    - Remove soc from examples and change address and size cells
      accordingly (Stephen Boyd)
    - Add reference for ports

Changes in v14:
    - Modify title for SC7180 and SDM845 yaml files (Stephen Boyd)
    - Add required list for display-controller node (Stephen Boyd)

Changes in v16:
    - Add reference for port (Rob Herring)
    - Make additionalProperties as false (Rob Herring)
---
 .../bindings/display/msm/dpu-sc7180.yaml           | 228 +++++++++++++++++++++
 .../bindings/display/msm/dpu-sdm845.yaml           | 212 +++++++++++++++++++
 .../devicetree/bindings/display/msm/dpu.txt        | 141 -------------
 3 files changed, 440 insertions(+), 141 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
 create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
 delete mode 100644 Documentation/devicetree/bindings/display/msm/dpu.txt

diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
new file mode 100644
index 0000000..12a86b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
@@ -0,0 +1,228 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for SC7180 target
+
+maintainers:
+  - Krishna Manikandan <mkrishn@codeaurora.org>
+
+description: |
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS and DPU are mentioned for SC7180 target.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sc7180-mdss
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: mdss
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  "#interrupt-cells":
+    const: 1
+
+  iommus:
+    items:
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+
+  ranges: true
+
+  interconnects:
+    items:
+      - description: Interconnect path specifying the port ids for data bus
+
+  interconnect-names:
+    const: mdp0-mem
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    description: Node containing the properties of DPU.
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sc7180-dpu
+
+      reg:
+        items:
+          - description: Address offset and size for mdp register set
+          - description: Address offset and size for vbif register set
+
+      reg-names:
+        items:
+          - const: mdp
+          - const: vbif
+
+      clocks:
+        items:
+          - description: Display hf axi clock
+          - description: Display ahb clock
+          - description: Display rotator clock
+          - description: Display lut clock
+          - description: Display core clock
+          - description: Display vsync clock
+
+      clock-names:
+        items:
+          - const: bus
+          - const: iface
+          - const: rot
+          - const: lut
+          - const: core
+          - const: vsync
+
+      interrupts:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      operating-points-v2: true
+
+      ports:
+        $ref: /schemas/graph.yaml#/properties/ports
+        description: |
+          Contains the list of output ports from DPU device. These ports
+          connect to interfaces that are external to the DPU hardware,
+          such as DSI, DP etc. Each output port contains an endpoint that
+          describes how it is connected to an external interface.
+
+        properties:
+          port@0:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF1 (DSI1)
+
+          port@2:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF0 (DP)
+
+        required:
+          - port@0
+
+    required:
+      - compatible
+      - reg
+      - reg-names
+      - clocks
+      - interrupts
+      - power-domains
+      - operating-points-v2
+      - ports
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+         #address-cells = <1>;
+         #size-cells = <1>;
+         compatible = "qcom,sc7180-mdss";
+         reg = <0xae00000 0x1000>;
+         reg-names = "mdss";
+         power-domains = <&dispcc MDSS_GDSC>;
+         clocks = <&gcc GCC_DISP_AHB_CLK>,
+                  <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&dispcc DISP_CC_MDSS_MDP_CLK>;
+         clock-names = "iface", "ahb", "core";
+
+         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+         interrupt-controller;
+         #interrupt-cells = <1>;
+
+         interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+         interconnect-names = "mdp0-mem";
+
+         iommus = <&apps_smmu 0x800 0x2>;
+         ranges;
+
+         display-controller@ae01000 {
+                   compatible = "qcom,sc7180-dpu";
+                   reg = <0x0ae01000 0x8f000>,
+                         <0x0aeb0000 0x2008>;
+
+                   reg-names = "mdp", "vbif";
+
+                   clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                            <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                            <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                            <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                            <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                            <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+                   clock-names = "bus", "iface", "rot", "lut", "core",
+                                 "vsync";
+
+                   interrupt-parent = <&mdss>;
+                   interrupts = <0>;
+                   power-domains = <&rpmhpd SC7180_CX>;
+                   operating-points-v2 = <&mdp_opp_table>;
+
+                   ports {
+                           #address-cells = <1>;
+                           #size-cells = <0>;
+
+                           port@0 {
+                                   reg = <0>;
+                                   dpu_intf1_out: endpoint {
+                                                  remote-endpoint = <&dsi0_in>;
+                                   };
+                           };
+
+                            port@2 {
+                                    reg = <2>;
+                                    dpu_intf0_out: endpoint {
+                                                   remote-endpoint = <&dp_in>;
+                                    };
+                            };
+                   };
+         };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
new file mode 100644
index 0000000..b4ea7c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for SDM845 target
+
+maintainers:
+  - Krishna Manikandan <mkrishn@codeaurora.org>
+
+description: |
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS and DPU are mentioned for SDM845 target.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sdm845-mdss
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: mdss
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AXI clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  "#interrupt-cells":
+    const: 1
+
+  iommus:
+    items:
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
+
+  ranges: true
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    description: Node containing the properties of DPU.
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sdm845-dpu
+
+      reg:
+        items:
+          - description: Address offset and size for mdp register set
+          - description: Address offset and size for vbif register set
+
+      reg-names:
+        items:
+          - const: mdp
+          - const: vbif
+
+      clocks:
+        items:
+          - description: Display ahb clock
+          - description: Display axi clock
+          - description: Display core clock
+          - description: Display vsync clock
+
+      clock-names:
+        items:
+          - const: iface
+          - const: bus
+          - const: core
+          - const: vsync
+
+      interrupts:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      operating-points-v2: true
+      ports:
+        $ref: /schemas/graph.yaml#/properties/ports
+        description: |
+          Contains the list of output ports from DPU device. These ports
+          connect to interfaces that are external to the DPU hardware,
+          such as DSI, DP etc. Each output port contains an endpoint that
+          describes how it is connected to an external interface.
+
+        properties:
+          port@0:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF1 (DSI1)
+
+          port@1:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF2 (DSI2)
+
+        required:
+          - port@0
+          - port@1
+
+    required:
+      - compatible
+      - reg
+      - reg-names
+      - clocks
+      - interrupts
+      - power-domains
+      - operating-points-v2
+      - ports
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+          #address-cells = <1>;
+          #size-cells = <1>;
+          compatible = "qcom,sdm845-mdss";
+          reg = <0x0ae00000 0x1000>;
+          reg-names = "mdss";
+          power-domains = <&dispcc MDSS_GDSC>;
+
+          clocks = <&gcc GCC_DISP_AHB_CLK>,
+                   <&gcc GCC_DISP_AXI_CLK>,
+                   <&dispcc DISP_CC_MDSS_MDP_CLK>;
+          clock-names = "iface", "bus", "core";
+
+          interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-controller;
+          #interrupt-cells = <1>;
+
+          iommus = <&apps_smmu 0x880 0x8>,
+                   <&apps_smmu 0xc80 0x8>;
+          ranges;
+
+          display-controller@ae01000 {
+                    compatible = "qcom,sdm845-dpu";
+                    reg = <0x0ae01000 0x8f000>,
+                          <0x0aeb0000 0x2008>;
+                    reg-names = "mdp", "vbif";
+
+                    clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                             <&dispcc DISP_CC_MDSS_AXI_CLK>,
+                             <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                             <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+                    clock-names = "iface", "bus", "core", "vsync";
+
+                    interrupt-parent = <&mdss>;
+                    interrupts = <0>;
+                    power-domains = <&rpmhpd SDM845_CX>;
+                    operating-points-v2 = <&mdp_opp_table>;
+
+                    ports {
+                           #address-cells = <1>;
+                           #size-cells = <0>;
+
+                           port@0 {
+                                   reg = <0>;
+                                   dpu_intf1_out: endpoint {
+                                                  remote-endpoint = <&dsi0_in>;
+                                   };
+                           };
+
+                           port@1 {
+                                   reg = <1>;
+                                   dpu_intf2_out: endpoint {
+                                                  remote-endpoint = <&dsi1_in>;
+                                   };
+                           };
+                    };
+          };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
deleted file mode 100644
index 586e6ea..0000000
--- a/Documentation/devicetree/bindings/display/msm/dpu.txt
+++ /dev/null
@@ -1,141 +0,0 @@
-Qualcomm Technologies, Inc. DPU KMS
-
-Description:
-
-Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
-sub-blocks like DPU display controller, DSI and DP interfaces etc.
-The DPU display controller is found in SDM845 SoC.
-
-MDSS:
-Required properties:
-- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss"
-- reg: physical base address and length of controller's registers.
-- reg-names: register region names. The following region is required:
-  * "mdss"
-- power-domains: a power domain consumer specifier according to
-  Documentation/devicetree/bindings/power/power_domain.txt
-- clocks: list of clock specifiers for clocks needed by the device.
-- clock-names: device clock names, must be in same order as clocks property.
-  The following clocks are required:
-  * "iface"
-  * "bus"
-  * "core"
-- interrupts: interrupt signal from MDSS.
-- interrupt-controller: identifies the node as an interrupt controller.
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- iommus: phandle of iommu device node.
-- #address-cells: number of address cells for the MDSS children. Should be 1.
-- #size-cells: Should be 1.
-- ranges: parent bus address space is the same as the child bus address space.
-- interconnects : interconnect path specifier for MDSS according to
-  Documentation/devicetree/bindings/interconnect/interconnect.txt. Should be
-  2 paths corresponding to 2 AXI ports.
-- interconnect-names : MDSS will have 2 port names to differentiate between the
-  2 interconnect paths defined with interconnect specifier.
-
-Optional properties:
-- assigned-clocks: list of clock specifiers for clocks needing rate assignment
-- assigned-clock-rates: list of clock frequencies sorted in the same order as
-  the assigned-clocks property.
-
-MDP:
-Required properties:
-- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
-- reg: physical base address and length of controller's registers.
-- reg-names : register region names. The following region is required:
-  * "mdp"
-  * "vbif"
-- clocks: list of clock specifiers for clocks needed by the device.
-- clock-names: device clock names, must be in same order as clocks property.
-  The following clocks are required.
-  * "bus"
-  * "iface"
-  * "core"
-  * "vsync"
-- interrupts: interrupt line from DPU to MDSS.
-- ports: contains the list of output ports from DPU device. These ports connect
-  to interfaces that are external to the DPU hardware, such as DSI, DP etc.
-
-  Each output port contains an endpoint that describes how it is connected to an
-  external interface. These are described by the standard properties documented
-  here:
-	Documentation/devicetree/bindings/graph.txt
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-
-	Port 0 -> DPU_INTF1 (DSI1)
-	Port 1 -> DPU_INTF2 (DSI2)
-
-Optional properties:
-- assigned-clocks: list of clock specifiers for clocks needing rate assignment
-- assigned-clock-rates: list of clock frequencies sorted in the same order as
-  the assigned-clocks property.
-
-Example:
-
-	mdss: mdss@ae00000 {
-		compatible = "qcom,sdm845-mdss";
-		reg = <0xae00000 0x1000>;
-		reg-names = "mdss";
-
-		power-domains = <&clock_dispcc 0>;
-
-		clocks = <&gcc GCC_DISP_AHB_CLK>, <&gcc GCC_DISP_AXI_CLK>,
-			 <&clock_dispcc DISP_CC_MDSS_MDP_CLK>;
-		clock-names = "iface", "bus", "core";
-
-		assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>;
-		assigned-clock-rates = <300000000>;
-
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		interconnects = <&rsc_hlos MASTER_MDP0 &rsc_hlos SLAVE_EBI1>,
-				<&rsc_hlos MASTER_MDP1 &rsc_hlos SLAVE_EBI1>;
-
-		interconnect-names = "mdp0-mem", "mdp1-mem";
-
-		iommus = <&apps_iommu 0>;
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0xae00000 0xb2008>;
-
-		mdss_mdp: mdp@ae01000 {
-			compatible = "qcom,sdm845-dpu";
-			reg = <0 0x1000 0x8f000>, <0 0xb0000 0x2008>;
-			reg-names = "mdp", "vbif";
-
-			clocks = <&clock_dispcc DISP_CC_MDSS_AHB_CLK>,
-				 <&clock_dispcc DISP_CC_MDSS_AXI_CLK>,
-				 <&clock_dispcc DISP_CC_MDSS_MDP_CLK>,
-				 <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>;
-			clock-names = "iface", "bus", "core", "vsync";
-
-			assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>,
-					  <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>;
-			assigned-clock-rates = <0 0 300000000 19200000>;
-
-			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					dpu_intf1_out: endpoint {
-						remote-endpoint = <&dsi0_in>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					dpu_intf2_out: endpoint {
-						remote-endpoint = <&dsi1_in>;
-					};
-				};
-			};
-		};
-	};
-- 
2.7.4


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v16 2/4] dt-bindings: msm: dsi: add yaml schemas for DSI bindings
  2021-05-18 10:03 [PATCH v16 1/4] dt-bindings: msm: disp: add yaml schemas for DPU bindings Krishna Manikandan
@ 2021-05-18 10:03 ` Krishna Manikandan
  2021-05-19 21:46   ` Rob Herring
  2021-05-18 10:03 ` [PATCH v16 3/4] dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings Krishna Manikandan
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 8+ messages in thread
From: Krishna Manikandan @ 2021-05-18 10:03 UTC (permalink / raw)
  To: dri-devel, linux-arm-msm, freedreno, devicetree, linux-kernel
  Cc: Krishna Manikandan, kalyan_t, tanmay, abhinavk, robdclark,
	swboyd, bjorn.andersson, vinod.koul, dianders, khsieh, robh+dt,
	sean, robh

Add YAML schema for the device tree bindings for DSI

Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>

Changes in v1:
    - Separate dsi controller bindings to a separate patch (Stephen Boyd)
    - Merge dsi-common-controller.yaml and dsi-controller-main.yaml to
      a single file (Stephen Boyd)
    - Drop supply entries and definitions from properties (Stephen Boyd)
    - Modify phy-names property for dsi controller (Stephen Boyd)
    - Remove boolean from description (Stephen Boyd)
    - Drop pinctrl properties as they are standard entries (Stephen Boyd)
    - Modify the description for ports property and keep the reference
      to the generic binding where this is defined (Stephen Boyd)
    - Add description to clock names (Stephen Boyd)
    - Correct the indendation (Stephen Boyd)
    - Drop the label for display dt nodes and correct the node
      name (Stephen Boyd)

Changes in v2:
    - Drop maxItems for clock (Stephen Boyd)
    - Drop qcom,mdss-mdp-transfer-time-us as it is not used in upstream
      dt file (Stephen Boyd)
    - Keep child node directly under soc node (Stephen Boyd)
    - Drop qcom,sync-dual-dsi as it is not used in upstream dt

Changes in v3:
    - Add description for register property (Stephen Boyd)

Changes in v4:
    - Add maxItems for phys property (Stephen Boyd)
    - Add maxItems for reg property (Stephen Boyd)
    - Add reference for data-lanes property (Stephen Boyd)
    - Remove soc from example (Stephen Boyd)

Changes in v5:
    - Modify title and description (Stephen Boyd)
    - Add required properties for ports node (Stephen Boyd)
    - Add data-lanes in the example (Stephen Boyd)
    - Drop qcom,master-dsi property (Stephen Boyd)

Changes in v6:
    - Add required properties for port@0, port@1 and corresponding
      endpoints (Stephen Boyd)
    - Add address-cells and size-cells for ports (Stephen Boyd)
    - Use additionalProperties instead of unevaluatedProperties (Stephen Boyd)

Changes in v7:
    - Add reference for ports and data-lanes (Rob Herring)
    - Add maxItems and minItems for data-lanes (Rob Herring)
---
 .../bindings/display/msm/dsi-controller-main.yaml  | 209 +++++++++++++++++
 .../devicetree/bindings/display/msm/dsi.txt        | 249 ---------------------
 2 files changed, 209 insertions(+), 249 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
 delete mode 100644 Documentation/devicetree/bindings/display/msm/dsi.txt

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
new file mode 100644
index 0000000..80f5218
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -0,0 +1,209 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI controller
+
+maintainers:
+  - Krishna Manikandan <mkrishn@codeaurora.org>
+
+allOf:
+  - $ref: "../dsi-controller.yaml#"
+
+properties:
+  compatible:
+    items:
+      - const: qcom,mdss-dsi-ctrl
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: dsi_ctrl
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Display byte clock
+      - description: Display byte interface clock
+      - description: Display pixel clock
+      - description: Display escape clock
+      - description: Display AHB clock
+      - description: Display AXI clock
+
+  clock-names:
+    items:
+      - const: byte
+      - const: byte_intf
+      - const: pixel
+      - const: core
+      - const: iface
+      - const: bus
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dsi
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  syscon-sfpb:
+    description: A phandle to mmss_sfpb syscon node (only for DSIv2).
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  qcom,dual-dsi-mode:
+    type: boolean
+    description: |
+      Indicates if the DSI controller is driving a panel which needs
+      2 DSI links.
+
+  power-domains:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  ports:
+    $ref: "/schemas/graph.yaml#/properties/ports"
+    description: |
+      Contains DSI controller input and output ports as children, each
+      containing one endpoint subnode.
+
+    properties:
+      port@0:
+        $ref: "/schemas/graph.yaml#/properties/port"
+        description: |
+          Input endpoints of the controller.
+
+        properties:
+          reg:
+            const: 0
+
+          endpoint:
+            type: object
+            properties:
+              remote-endpoint: true
+              data-lanes:
+                $ref: "../../media/video-interfaces.yaml"
+                description: |
+                  This describes how the physical DSI data lanes are mapped
+                  to the logical lanes on the given platform. The value contained in
+                  index n describes what physical lane is mapped to the logical lane n
+                  (DATAn, where n lies between 0 and 3). The clock lane position is fixed
+                  and can't be changed. Hence, they aren't a part of the DT bindings.
+                maxItems: 4
+                minItems: 4
+                items:
+                  enum: [ 0, 1, 2, 3 ]
+
+        required:
+          - reg
+          - endpoint
+
+      port@1:
+        $ref: "/schemas/graph.yaml#/properties/port"
+        description: |
+          Output endpoints of the controller.
+        properties:
+          reg:
+            const: 1
+
+          endpoint:
+            type: object
+            properties:
+              remote-endpoint: true
+              data-lanes:
+                maxItems: 4
+                minItems: 4
+                items:
+                  enum: [ 0, 1, 2, 3 ]
+
+        required:
+          - reg
+          - endpoint
+
+    required:
+      - port@0
+      - port@1
+      - "#address-cells"
+      - "#size-cells"
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - power-domains
+  - operating-points-v2
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/interrupt-controller/arm-gic.h>
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+     #include <dt-bindings/power/qcom-rpmpd.h>
+
+     dsi@ae94000 {
+           compatible = "qcom,mdss-dsi-ctrl";
+           reg = <0x0ae94000 0x400>;
+           reg-names = "dsi_ctrl";
+
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           interrupt-parent = <&mdss>;
+           interrupts = <4>;
+
+           clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                    <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                    <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                    <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                    <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                    <&dispcc DISP_CC_MDSS_AXI_CLK>;
+           clock-names = "byte",
+                         "byte_intf",
+                         "pixel",
+                         "core",
+                         "iface",
+                         "bus";
+
+           phys = <&dsi0_phy>;
+           phy-names = "dsi";
+
+           power-domains = <&rpmhpd SC7180_CX>;
+           operating-points-v2 = <&dsi_opp_table>;
+
+           ports {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+
+                  port@0 {
+                          reg = <0>;
+                          dsi0_in: endpoint {
+                                   remote-endpoint = <&dpu_intf1_out>;
+                          };
+                  };
+
+                  port@1 {
+                          reg = <1>;
+                          dsi0_out: endpoint {
+                                   remote-endpoint = <&sn65dsi86_in>;
+                                   data-lanes = <0 1 2 3>;
+                          };
+                  };
+           };
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
deleted file mode 100644
index b9a64d3..0000000
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ /dev/null
@@ -1,249 +0,0 @@
-Qualcomm Technologies Inc. adreno/snapdragon DSI output
-
-DSI Controller:
-Required properties:
-- compatible:
-  * "qcom,mdss-dsi-ctrl"
-- reg: Physical base address and length of the registers of controller
-- reg-names: The names of register regions. The following regions are required:
-  * "dsi_ctrl"
-- interrupts: The interrupt signal from the DSI block.
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: Phandles to device clocks.
-- clock-names: the following clocks are required:
-  * "mdp_core"
-  * "iface"
-  * "bus"
-  * "core_mmss"
-  * "byte"
-  * "pixel"
-  * "core"
-  For DSIv2, we need an additional clock:
-   * "src"
-  For DSI6G v2.0 onwards, we need also need the clock:
-   * "byte_intf"
-- assigned-clocks: Parents of "byte" and "pixel" for the given platform.
-- assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
-  by a DSI PHY block. See [1] for details on clock bindings.
-- vdd-supply: phandle to vdd regulator device node
-- vddio-supply: phandle to vdd-io regulator device node
-- vdda-supply: phandle to vdda regulator device node
-- phys: phandle to DSI PHY device node
-- phy-names: the name of the corresponding PHY device
-- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
-- ports: Contains 2 DSI controller ports as child nodes. Each port contains
-  an endpoint subnode as defined in [2] and [3].
-
-Optional properties:
-- panel@0: Node of panel connected to this DSI controller.
-  See files in [4] for each supported panel.
-- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
-  driving a panel which needs 2 DSI links.
-- qcom,master-dsi: Boolean value indicating if the DSI controller is driving
-  the master link of the 2-DSI panel.
-- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is
-  driving a 2-DSI panel whose 2 links need receive command simultaneously.
-- pinctrl-names: the pin control state names; should contain "default"
-- pinctrl-0: the default pinctrl state (active)
-- pinctrl-n: the "sleep" pinctrl state
-- ports: contains DSI controller input and output ports as children, each
-  containing one endpoint subnode.
-
-  DSI Endpoint properties:
-  - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's
-    input endpoint. For port@1, set to the MDP interface output. See [2] for
-    device graph info.
-
-  - data-lanes: this describes how the physical DSI data lanes are mapped
-    to the logical lanes on the given platform. The value contained in
-    index n describes what physical lane is mapped to the logical lane n
-    (DATAn, where n lies between 0 and 3). The clock lane position is fixed
-    and can't be changed. Hence, they aren't a part of the DT bindings. See
-    [3] for more info on the data-lanes property.
-
-    For example:
-
-    data-lanes = <3 0 1 2>;
-
-    The above mapping describes that the logical data lane DATA0 is mapped to
-    the physical data lane DATA3, logical DATA1 to physical DATA0, logic DATA2
-    to phys DATA1 and logic DATA3 to phys DATA2.
-
-    There are only a limited number of physical to logical mappings possible:
-    <0 1 2 3>
-    <1 2 3 0>
-    <2 3 0 1>
-    <3 0 1 2>
-    <0 3 2 1>
-    <1 0 3 2>
-    <2 1 0 3>
-    <3 2 1 0>
-
-DSI PHY:
-Required properties:
-- compatible: Could be the following
-  * "qcom,dsi-phy-28nm-hpm"
-  * "qcom,dsi-phy-28nm-lp"
-  * "qcom,dsi-phy-20nm"
-  * "qcom,dsi-phy-28nm-8960"
-  * "qcom,dsi-phy-14nm"
-  * "qcom,dsi-phy-14nm-660"
-  * "qcom,dsi-phy-10nm"
-  * "qcom,dsi-phy-10nm-8998"
-  * "qcom,dsi-phy-7nm"
-  * "qcom,dsi-phy-7nm-8150"
-- reg: Physical base address and length of the registers of PLL, PHY. Some
-  revisions require the PHY regulator base address, whereas others require the
-  PHY lane base address. See below for each PHY revision.
-- reg-names: The names of register regions. The following regions are required:
-  For DSI 28nm HPM/LP/8960 PHYs and 20nm PHY:
-  * "dsi_pll"
-  * "dsi_phy"
-  * "dsi_phy_regulator"
-  For DSI 14nm, 10nm and 7nm PHYs:
-  * "dsi_pll"
-  * "dsi_phy"
-  * "dsi_phy_lane"
-- clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating
-  2 clocks: A byte clock (index 0), and a pixel clock (index 1).
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: Phandles to device clocks. See [1] for details on clock bindings.
-- clock-names: the following clocks are required:
-  * "iface"
-  * "ref" (only required for new DTS files/entries)
-  For 28nm HPM/LP, 28nm 8960 PHYs:
-- vddio-supply: phandle to vdd-io regulator device node
-  For 20nm PHY:
-- vddio-supply: phandle to vdd-io regulator device node
-- vcca-supply: phandle to vcca regulator device node
-  For 14nm PHY:
-- vcca-supply: phandle to vcca regulator device node
-  For 10nm and 7nm PHY:
-- vdds-supply: phandle to vdds regulator device node
-
-Optional properties:
-- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
-  regulator is wanted.
-- qcom,mdss-mdp-transfer-time-us:	Specifies the dsi transfer time for command mode
-					panels in microseconds. Driver uses this number to adjust
-					the clock rate according to the expected transfer time.
-					Increasing this value would slow down the mdp processing
-					and can result in slower performance.
-					Decreasing this value can speed up the mdp processing,
-					but this can also impact power consumption.
-					As a rule this time should not be higher than the time
-					that would be expected with the processing at the
-					dsi link rate since anyways this would be the maximum
-					transfer time that could be achieved.
-					If ping pong split is enabled, this time should not be higher
-					than two times the dsi link rate time.
-					If the property is not specified, then the default value is 14000 us.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/graph.txt
-[3] Documentation/devicetree/bindings/media/video-interfaces.txt
-[4] Documentation/devicetree/bindings/display/panel/
-
-Example:
-	dsi0: dsi@fd922800 {
-		compatible = "qcom,mdss-dsi-ctrl";
-		qcom,dsi-host-index = <0>;
-		interrupt-parent = <&mdp>;
-		interrupts = <4 0>;
-		reg-names = "dsi_ctrl";
-		reg = <0xfd922800 0x200>;
-		power-domains = <&mmcc MDSS_GDSC>;
-		clock-names =
-			"bus",
-			"byte",
-			"core",
-			"core_mmss",
-			"iface",
-			"mdp_core",
-			"pixel";
-		clocks =
-			<&mmcc MDSS_AXI_CLK>,
-			<&mmcc MDSS_BYTE0_CLK>,
-			<&mmcc MDSS_ESC0_CLK>,
-			<&mmcc MMSS_MISC_AHB_CLK>,
-			<&mmcc MDSS_AHB_CLK>,
-			<&mmcc MDSS_MDP_CLK>,
-			<&mmcc MDSS_PCLK0_CLK>;
-
-		assigned-clocks =
-				 <&mmcc BYTE0_CLK_SRC>,
-				 <&mmcc PCLK0_CLK_SRC>;
-		assigned-clock-parents =
-				 <&dsi_phy0 0>,
-				 <&dsi_phy0 1>;
-
-		vdda-supply = <&pma8084_l2>;
-		vdd-supply = <&pma8084_l22>;
-		vddio-supply = <&pma8084_l12>;
-
-		phys = <&dsi_phy0>;
-		phy-names ="dsi-phy";
-
-		qcom,dual-dsi-mode;
-		qcom,master-dsi;
-		qcom,sync-dual-dsi;
-
-		qcom,mdss-mdp-transfer-time-us = <12000>;
-
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&dsi_active>;
-		pinctrl-1 = <&dsi_suspend>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				dsi0_in: endpoint {
-					remote-endpoint = <&mdp_intf1_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				dsi0_out: endpoint {
-					remote-endpoint = <&panel_in>;
-					data-lanes = <0 1 2 3>;
-				};
-			};
-		};
-
-		panel: panel@0 {
-			compatible = "sharp,lq101r1sx01";
-			reg = <0>;
-			link2 = <&secondary>;
-
-			power-supply = <...>;
-			backlight = <...>;
-
-			port {
-				panel_in: endpoint {
-					remote-endpoint = <&dsi0_out>;
-				};
-			};
-		};
-	};
-
-	dsi_phy0: dsi-phy@fd922a00 {
-		compatible = "qcom,dsi-phy-28nm-hpm";
-		qcom,dsi-phy-index = <0>;
-		reg-names =
-			"dsi_pll",
-			"dsi_phy",
-			"dsi_phy_regulator";
-		reg =   <0xfd922a00 0xd4>,
-			<0xfd922b00 0x2b0>,
-			<0xfd922d80 0x7b>;
-		clock-names = "iface";
-		clocks = <&mmcc MDSS_AHB_CLK>;
-		#clock-cells = <1>;
-		vddio-supply = <&pma8084_l12>;
-
-		qcom,dsi-phy-regulator-ldo-mode;
-	};
-- 
2.7.4


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v16 3/4] dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings
  2021-05-18 10:03 [PATCH v16 1/4] dt-bindings: msm: disp: add yaml schemas for DPU bindings Krishna Manikandan
  2021-05-18 10:03 ` [PATCH v16 2/4] dt-bindings: msm: dsi: add yaml schemas for DSI bindings Krishna Manikandan
@ 2021-05-18 10:03 ` Krishna Manikandan
  2021-05-19 21:55   ` Rob Herring
  2021-05-18 10:03 ` [PATCH v16 4/4] dt-bindings: msm/dp: Add bindings of MSM DisplayPort controller Krishna Manikandan
  2021-05-19 21:48 ` [PATCH v16 1/4] dt-bindings: msm: disp: add yaml schemas for DPU bindings Rob Herring
  3 siblings, 1 reply; 8+ messages in thread
From: Krishna Manikandan @ 2021-05-18 10:03 UTC (permalink / raw)
  To: dri-devel, linux-arm-msm, freedreno, devicetree, linux-kernel
  Cc: Krishna Manikandan, kalyan_t, tanmay, abhinavk, robdclark,
	swboyd, bjorn.andersson, vinod.koul, dianders, khsieh, robh+dt,
	sean, robh

Add YAML schema for the device tree bindings for DSI PHY.

Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>

Changes in v1:
   - Merge dsi-phy.yaml and dsi-phy-10nm.yaml (Stephen Boyd)
   - Remove qcom,dsi-phy-regulator-ldo-mode (Stephen Boyd)
   - Add clock cells properly (Stephen Boyd)
   - Remove unnecessary decription from clock names (Stephen Boyd)
   - Add pin names for the supply entries for 10nm phy which is
     used in sc7180 and sdm845 (Stephen Boyd)
   - Remove unused header files from examples (Stephen Boyd)
   - Drop labels for display nodes and correct node name (Stephen Boyd)

Changes in v2:
   - Drop maxItems for clock (Stephen Boyd)
   - Add vdds supply pin information for sdm845 (Stephen Boyd)
   - Add examples for 14nm, 20nm and 28nm phy yaml files (Stephen Boyd)
   - Keep child nodes directly under soc node (Stephen Boyd)

Changes in v3:
   - Use a separate yaml file to describe the common properties
     for all the dsi phy versions (Stephen Boyd)
   - Remove soc from examples (Stephen Boyd)
   - Add description for register property

Changes in v4:
   - Modify the title for all the phy versions (Stephen Boyd)
   - Drop description for all the phy versions (Stephen Boyd)
   - Modify the description for register property (Stephen Boyd)

Changes in v5:
   - Remove unused properties from common dsi phy file
   - Add clock-cells and phy-cells to required property
     list (Stephen Boyd)

Changes in v6:
   - Add proper compatible string in example
---
 .../bindings/display/msm/dsi-phy-10nm.yaml         | 68 +++++++++++++++++++++
 .../bindings/display/msm/dsi-phy-14nm.yaml         | 66 ++++++++++++++++++++
 .../bindings/display/msm/dsi-phy-20nm.yaml         | 71 ++++++++++++++++++++++
 .../bindings/display/msm/dsi-phy-28nm.yaml         | 68 +++++++++++++++++++++
 .../bindings/display/msm/dsi-phy-common.yaml       | 40 ++++++++++++
 5 files changed, 313 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
 create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
 create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
 create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
 create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
new file mode 100644
index 0000000..4a26bef
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-10nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 10nm PHY
+
+maintainers:
+  - Krishna Manikandan <mkrishn@codeaurora.org>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,dsi-phy-10nm
+      - const: qcom,dsi-phy-10nm-8998
+
+  reg:
+    items:
+      - description: dsi phy register set
+      - description: dsi phy lane register set
+      - description: dsi pll register set
+
+  reg-names:
+    items:
+      - const: dsi_phy
+      - const: dsi_phy_lane
+      - const: dsi_pll
+
+  vdds-supply:
+    description: |
+      Connected to DSI0_MIPI_DSI_PLL_VDDA0P9 pin for sc7180 target and
+      connected to VDDA_MIPI_DSI_0_PLL_0P9 pin for sdm845 target
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - vdds-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@ae94400 {
+         compatible = "qcom,dsi-phy-10nm";
+         reg = <0x0ae94400 0x200>,
+               <0x0ae94600 0x280>,
+               <0x0ae94a00 0x1e0>;
+         reg-names = "dsi_phy",
+                     "dsi_phy_lane",
+                     "dsi_pll";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vdds-supply = <&vdda_mipi_dsi0_pll>;
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
new file mode 100644
index 0000000..72a00cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-14nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 14nm PHY
+
+maintainers:
+  - Krishna Manikandan <mkrishn@codeaurora.org>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,dsi-phy-14nm
+      - const: qcom,dsi-phy-14nm-660
+
+  reg:
+    items:
+      - description: dsi phy register set
+      - description: dsi phy lane register set
+      - description: dsi pll register set
+
+  reg-names:
+    items:
+      - const: dsi_phy
+      - const: dsi_phy_lane
+      - const: dsi_pll
+
+  vcca-supply:
+    description: Phandle to vcca regulator device node.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - vcca-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@ae94400 {
+         compatible = "qcom,dsi-phy-14nm";
+         reg = <0x0ae94400 0x200>,
+               <0x0ae94600 0x280>,
+               <0x0ae94a00 0x1e0>;
+         reg-names = "dsi_phy",
+                     "dsi_phy_lane",
+                     "dsi_pll";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vcca-supply = <&vcca_reg>;
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
new file mode 100644
index 0000000..743806d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-20nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 20nm PHY
+
+maintainers:
+  - Krishna Manikandan <mkrishn@codeaurora.org>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,dsi-phy-20nm
+
+  reg:
+    items:
+      - description: dsi pll register set
+      - description: dsi phy register set
+      - description: dsi phy regulator register set
+
+  reg-names:
+    items:
+      - const: dsi_pll
+      - const: dsi_phy
+      - const: dsi_phy_regulator
+
+  vcca-supply:
+    description: Phandle to vcca regulator device node.
+
+  vddio-supply:
+    description: Phandle to vdd-io regulator device node.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - vddio-supply
+  - vcca-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@fd922a00 {
+         compatible = "qcom,dsi-phy-20nm";
+         reg = <0xfd922a00 0xd4>,
+               <0xfd922b00 0x2b0>,
+               <0xfd922d80 0x7b>;
+         reg-names = "dsi_pll",
+                     "dsi_phy",
+                     "dsi_phy_regulator";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vcca-supply = <&vcca_reg>;
+         vddio-supply = <&vddio_reg>;
+
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
new file mode 100644
index 0000000..b106007
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-28nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 28nm PHY
+
+maintainers:
+  - Krishna Manikandan <mkrishn@codeaurora.org>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,dsi-phy-28nm-hpm
+      - const: qcom,dsi-phy-28nm-lp
+      - const: qcom,dsi-phy-28nm-8960
+
+  reg:
+    items:
+      - description: dsi pll register set
+      - description: dsi phy register set
+      - description: dsi phy regulator register set
+
+  reg-names:
+    items:
+      - const: dsi_pll
+      - const: dsi_phy
+      - const: dsi_phy_regulator
+
+  vddio-supply:
+    description: Phandle to vdd-io regulator device node.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - vddio-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@fd922a00 {
+         compatible = "qcom,dsi-phy-28nm-lp";
+         reg = <0xfd922a00 0xd4>,
+               <0xfd922b00 0x2b0>,
+               <0xfd922d80 0x7b>;
+         reg-names = "dsi_pll",
+                     "dsi_phy",
+                     "dsi_phy_regulator";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vddio-supply = <&vddio_reg>;
+
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
new file mode 100644
index 0000000..502bdda
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Description of Qualcomm Display DSI PHY common dt properties
+
+maintainers:
+  - Krishna Manikandan <mkrishn@codeaurora.org>
+
+description: |
+  This defines the DSI PHY dt properties which are common for all
+  dsi phy versions.
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: Display AHB clock
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ref
+
+required:
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#phy-cells"
+
+additionalProperties: true
+...
-- 
2.7.4


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v16 4/4] dt-bindings: msm/dp: Add bindings of MSM DisplayPort controller
  2021-05-18 10:03 [PATCH v16 1/4] dt-bindings: msm: disp: add yaml schemas for DPU bindings Krishna Manikandan
  2021-05-18 10:03 ` [PATCH v16 2/4] dt-bindings: msm: dsi: add yaml schemas for DSI bindings Krishna Manikandan
  2021-05-18 10:03 ` [PATCH v16 3/4] dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings Krishna Manikandan
@ 2021-05-18 10:03 ` Krishna Manikandan
  2021-05-19 21:58   ` Rob Herring
  2021-05-19 21:48 ` [PATCH v16 1/4] dt-bindings: msm: disp: add yaml schemas for DPU bindings Rob Herring
  3 siblings, 1 reply; 8+ messages in thread
From: Krishna Manikandan @ 2021-05-18 10:03 UTC (permalink / raw)
  To: dri-devel, linux-arm-msm, freedreno, devicetree, linux-kernel
  Cc: Krishna Manikandan, kalyan_t, tanmay, abhinavk, robdclark,
	swboyd, bjorn.andersson, vinod.koul, dianders, khsieh, robh+dt,
	sean, robh, Chandan Uddaraju, Vara Reddy

Add bindings for Snapdragon DisplayPort controller driver.

Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>

Changes in V2:
-Provide details about sel-gpio

Changes in V4:
-Provide details about max dp lanes
-Change the commit text

Changes in V5:
-moved dp.txt to yaml file

Changes in v6:
- Squash all AUX LUT properties into one pattern Property
- Make aux-cfg[0-9]-settings properties optional
- Remove PLL/PHY bindings from DP controller dts
- Add DP clocks description
- Remove _clk suffix from clock names
- Rename pixel clock to stream_pixel
- Remove redundant bindings (GPIO, PHY, HDCP clock, etc..)
- Fix indentation
- Add Display Port as interface of DPU in DPU bindings
  and add port mapping accordingly.

Chages in v7:
- Add dp-controller.yaml file common between multiple SOC
- Rename dp-sc7180.yaml to dp-controller-sc7180.yaml
- change compatible string and add SOC name to it.
- Remove Root clock generator for pixel clock
- Add assigned-clocks and assigned-clock-parents bindings
- Remove redundant properties, descriptions and blank lines
- Add DP port in DPU bindings
- Update depends-on tag in commit message and rebase change accordingly

Changes in v8:
- Add MDSS AHB clock in bindings

Changes in v9:
- Remove redundant reg-name property
- Change assigned-clocks and assigned-clocks-parents counts to 2
- Use IRQ flags in example dts

Changes in v10:
- Change title of this patch as it does not contain PLL bindings anymore
- Remove redundant properties
- Remove use of IRQ flag
- Fix ports property

Changes in v11:
- add ports required of both #address-cells and  #size-cells
- add required operating-points-v2
- add required #sound-dai-cells
- add required power-domains
- update maintainer list

Changes in v12:
- remove soc node from examples (Stephen Boyd)
- split dpu-sc7180.yaml changes to separate patch (Stephen Boyd)

Changes in v13:
- add assigned-clocks
- add assigned-clock-parents

Changes in v14:
- add reference for ports (Rob Herring)
---
 .../bindings/display/msm/dp-controller.yaml        | 159 +++++++++++++++++++++
 1 file changed, 159 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/msm/dp-controller.yaml

diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
new file mode 100644
index 0000000..bcce567
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dp-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MSM Display Port Controller
+
+maintainers:
+  - Kuogee Hsieh <khsieh@codeaurora.org>
+
+description: |
+  Device tree bindings for DisplayPort host controller for MSM targets
+  that are compatible with VESA DisplayPort interface specification.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-dp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AHB clock to enable register access
+      - description: Display Port AUX clock
+      - description: Display Port Link clock
+      - description: Link interface clock between DP and PHY
+      - description: Display Port Pixel clock
+
+  clock-names:
+    items:
+      - const: core_iface
+      - const: core_aux
+      - const: ctrl_link
+      - const: ctrl_link_iface
+      - const: stream_pixel
+
+  assigned-clocks:
+    items:
+      - description: link clock source
+      - description: pixel clock source
+
+  assigned-clock-parents:
+    items:
+      - description: phy 0 parent
+      - description: phy 1 parent
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: dp
+
+  operating-points-v2:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input endpoint of the controller
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the controller
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+    additionalProperties: false
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - "#sound-dai-cells"
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+    #include <dt-bindings/power/qcom-aoss-qmp.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    displayport-controller@ae90000 {
+        compatible = "qcom,sc7180-dp";
+        reg = <0xae90000 0x1400>;
+        interrupt-parent = <&mdss>;
+        interrupts = <12>;
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+                 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+                 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+                 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+        clock-names = "core_iface", "core_aux",
+                      "ctrl_link",
+                      "ctrl_link_iface", "stream_pixel";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+                          <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+
+        assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+
+        phys = <&dp_phy>;
+        phy-names = "dp";
+
+        #sound-dai-cells = <0>;
+
+        power-domains = <&rpmhpd SC7180_CX>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dpu_intf0_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&typec>;
+                };
+            };
+        };
+    };
+...
-- 
2.7.4


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v16 2/4] dt-bindings: msm: dsi: add yaml schemas for DSI bindings
  2021-05-18 10:03 ` [PATCH v16 2/4] dt-bindings: msm: dsi: add yaml schemas for DSI bindings Krishna Manikandan
@ 2021-05-19 21:46   ` Rob Herring
  0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2021-05-19 21:46 UTC (permalink / raw)
  To: Krishna Manikandan
  Cc: dri-devel, linux-arm-msm, freedreno, devicetree, linux-kernel,
	kalyan_t, tanmay, abhinavk, robdclark, swboyd, bjorn.andersson,
	vinod.koul, dianders, khsieh, sean

On Tue, May 18, 2021 at 03:33:43PM +0530, Krishna Manikandan wrote:
> Add YAML schema for the device tree bindings for DSI
> 
> Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
> 
> Changes in v1:
>     - Separate dsi controller bindings to a separate patch (Stephen Boyd)
>     - Merge dsi-common-controller.yaml and dsi-controller-main.yaml to
>       a single file (Stephen Boyd)
>     - Drop supply entries and definitions from properties (Stephen Boyd)
>     - Modify phy-names property for dsi controller (Stephen Boyd)
>     - Remove boolean from description (Stephen Boyd)
>     - Drop pinctrl properties as they are standard entries (Stephen Boyd)
>     - Modify the description for ports property and keep the reference
>       to the generic binding where this is defined (Stephen Boyd)
>     - Add description to clock names (Stephen Boyd)
>     - Correct the indendation (Stephen Boyd)
>     - Drop the label for display dt nodes and correct the node
>       name (Stephen Boyd)
> 
> Changes in v2:
>     - Drop maxItems for clock (Stephen Boyd)
>     - Drop qcom,mdss-mdp-transfer-time-us as it is not used in upstream
>       dt file (Stephen Boyd)
>     - Keep child node directly under soc node (Stephen Boyd)
>     - Drop qcom,sync-dual-dsi as it is not used in upstream dt
> 
> Changes in v3:
>     - Add description for register property (Stephen Boyd)
> 
> Changes in v4:
>     - Add maxItems for phys property (Stephen Boyd)
>     - Add maxItems for reg property (Stephen Boyd)
>     - Add reference for data-lanes property (Stephen Boyd)
>     - Remove soc from example (Stephen Boyd)
> 
> Changes in v5:
>     - Modify title and description (Stephen Boyd)
>     - Add required properties for ports node (Stephen Boyd)
>     - Add data-lanes in the example (Stephen Boyd)
>     - Drop qcom,master-dsi property (Stephen Boyd)
> 
> Changes in v6:
>     - Add required properties for port@0, port@1 and corresponding
>       endpoints (Stephen Boyd)
>     - Add address-cells and size-cells for ports (Stephen Boyd)
>     - Use additionalProperties instead of unevaluatedProperties (Stephen Boyd)
> 
> Changes in v7:
>     - Add reference for ports and data-lanes (Rob Herring)
>     - Add maxItems and minItems for data-lanes (Rob Herring)
> ---
>  .../bindings/display/msm/dsi-controller-main.yaml  | 209 +++++++++++++++++
>  .../devicetree/bindings/display/msm/dsi.txt        | 249 ---------------------
>  2 files changed, 209 insertions(+), 249 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
>  delete mode 100644 Documentation/devicetree/bindings/display/msm/dsi.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> new file mode 100644
> index 0000000..80f5218
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> @@ -0,0 +1,209 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Display DSI controller
> +
> +maintainers:
> +  - Krishna Manikandan <mkrishn@codeaurora.org>
> +
> +allOf:
> +  - $ref: "../dsi-controller.yaml#"
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: qcom,mdss-dsi-ctrl
> +
> +  reg:
> +    maxItems: 1
> +
> +  reg-names:
> +    const: dsi_ctrl
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Display byte clock
> +      - description: Display byte interface clock
> +      - description: Display pixel clock
> +      - description: Display escape clock
> +      - description: Display AHB clock
> +      - description: Display AXI clock
> +
> +  clock-names:
> +    items:
> +      - const: byte
> +      - const: byte_intf
> +      - const: pixel
> +      - const: core
> +      - const: iface
> +      - const: bus
> +
> +  phys:
> +    maxItems: 1
> +
> +  phy-names:
> +    const: dsi
> +
> +  "#address-cells": true
> +
> +  "#size-cells": true
> +
> +  syscon-sfpb:
> +    description: A phandle to mmss_sfpb syscon node (only for DSIv2).
> +    $ref: "/schemas/types.yaml#/definitions/phandle"
> +
> +  qcom,dual-dsi-mode:
> +    type: boolean
> +    description: |
> +      Indicates if the DSI controller is driving a panel which needs
> +      2 DSI links.
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  operating-points-v2: true
> +
> +  ports:
> +    $ref: "/schemas/graph.yaml#/properties/ports"
> +    description: |
> +      Contains DSI controller input and output ports as children, each
> +      containing one endpoint subnode.
> +
> +    properties:
> +      port@0:
> +        $ref: "/schemas/graph.yaml#/properties/port"
> +        description: |
> +          Input endpoints of the controller.
> +
> +        properties:
> +          reg:
> +            const: 0

You can drop 'reg'.

> +
> +          endpoint:
> +            type: object
> +            properties:
> +              remote-endpoint: true

Don't need this.

> +              data-lanes:
> +                $ref: "../../media/video-interfaces.yaml"

This is not where the $ref goes. Please look at other users.

> +                description: |
> +                  This describes how the physical DSI data lanes are mapped
> +                  to the logical lanes on the given platform. The value contained in
> +                  index n describes what physical lane is mapped to the logical lane n
> +                  (DATAn, where n lies between 0 and 3). The clock lane position is fixed
> +                  and can't be changed. Hence, they aren't a part of the DT bindings.

Don't redescribe common properties. If you have something special about 
this device, then say it.

> +                maxItems: 4
> +                minItems: 4
> +                items:
> +                  enum: [ 0, 1, 2, 3 ]
> +
> +        required:
> +          - reg
> +          - endpoint

Drop. Already covered by the common schema.

> +
> +      port@1:
> +        $ref: "/schemas/graph.yaml#/properties/port"
> +        description: |
> +          Output endpoints of the controller.
> +        properties:
> +          reg:
> +            const: 1
> +
> +          endpoint:
> +            type: object

Needs a $ref to video-interfaces.yaml.

> +            properties:
> +              remote-endpoint: true
> +              data-lanes:
> +                maxItems: 4
> +                minItems: 4
> +                items:
> +                  enum: [ 0, 1, 2, 3 ]
> +

> +        required:
> +          - reg
> +          - endpoint

Drop

> +
> +    required:
> +      - port@0
> +      - port@1

> +      - "#address-cells"
> +      - "#size-cells"

Last 2 are covered by the common schema.

> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - phys
> +  - phy-names
> +  - power-domains
> +  - operating-points-v2
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +     #include <dt-bindings/interrupt-controller/arm-gic.h>
> +     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
> +     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> +     #include <dt-bindings/power/qcom-rpmpd.h>
> +
> +     dsi@ae94000 {
> +           compatible = "qcom,mdss-dsi-ctrl";
> +           reg = <0x0ae94000 0x400>;
> +           reg-names = "dsi_ctrl";
> +
> +           #address-cells = <1>;
> +           #size-cells = <0>;
> +
> +           interrupt-parent = <&mdss>;
> +           interrupts = <4>;
> +
> +           clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> +                    <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> +                    <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> +                    <&dispcc DISP_CC_MDSS_ESC0_CLK>,
> +                    <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                    <&dispcc DISP_CC_MDSS_AXI_CLK>;
> +           clock-names = "byte",
> +                         "byte_intf",
> +                         "pixel",
> +                         "core",
> +                         "iface",
> +                         "bus";
> +
> +           phys = <&dsi0_phy>;
> +           phy-names = "dsi";
> +
> +           power-domains = <&rpmhpd SC7180_CX>;
> +           operating-points-v2 = <&dsi_opp_table>;
> +
> +           ports {
> +                  #address-cells = <1>;
> +                  #size-cells = <0>;
> +
> +                  port@0 {
> +                          reg = <0>;
> +                          dsi0_in: endpoint {
> +                                   remote-endpoint = <&dpu_intf1_out>;
> +                          };
> +                  };
> +
> +                  port@1 {
> +                          reg = <1>;
> +                          dsi0_out: endpoint {
> +                                   remote-endpoint = <&sn65dsi86_in>;
> +                                   data-lanes = <0 1 2 3>;
> +                          };
> +                  };
> +           };
> +     };
> +...
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
> deleted file mode 100644
> index b9a64d3..0000000
> --- a/Documentation/devicetree/bindings/display/msm/dsi.txt
> +++ /dev/null
> @@ -1,249 +0,0 @@
> -Qualcomm Technologies Inc. adreno/snapdragon DSI output
> -
> -DSI Controller:
> -Required properties:
> -- compatible:
> -  * "qcom,mdss-dsi-ctrl"
> -- reg: Physical base address and length of the registers of controller
> -- reg-names: The names of register regions. The following regions are required:
> -  * "dsi_ctrl"
> -- interrupts: The interrupt signal from the DSI block.
> -- power-domains: Should be <&mmcc MDSS_GDSC>.
> -- clocks: Phandles to device clocks.
> -- clock-names: the following clocks are required:
> -  * "mdp_core"
> -  * "iface"
> -  * "bus"
> -  * "core_mmss"
> -  * "byte"
> -  * "pixel"
> -  * "core"
> -  For DSIv2, we need an additional clock:
> -   * "src"
> -  For DSI6G v2.0 onwards, we need also need the clock:
> -   * "byte_intf"
> -- assigned-clocks: Parents of "byte" and "pixel" for the given platform.
> -- assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
> -  by a DSI PHY block. See [1] for details on clock bindings.
> -- vdd-supply: phandle to vdd regulator device node
> -- vddio-supply: phandle to vdd-io regulator device node
> -- vdda-supply: phandle to vdda regulator device node
> -- phys: phandle to DSI PHY device node
> -- phy-names: the name of the corresponding PHY device
> -- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
> -- ports: Contains 2 DSI controller ports as child nodes. Each port contains
> -  an endpoint subnode as defined in [2] and [3].
> -
> -Optional properties:
> -- panel@0: Node of panel connected to this DSI controller.
> -  See files in [4] for each supported panel.
> -- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
> -  driving a panel which needs 2 DSI links.
> -- qcom,master-dsi: Boolean value indicating if the DSI controller is driving
> -  the master link of the 2-DSI panel.
> -- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is
> -  driving a 2-DSI panel whose 2 links need receive command simultaneously.
> -- pinctrl-names: the pin control state names; should contain "default"
> -- pinctrl-0: the default pinctrl state (active)
> -- pinctrl-n: the "sleep" pinctrl state
> -- ports: contains DSI controller input and output ports as children, each
> -  containing one endpoint subnode.
> -
> -  DSI Endpoint properties:
> -  - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's
> -    input endpoint. For port@1, set to the MDP interface output. See [2] for
> -    device graph info.
> -
> -  - data-lanes: this describes how the physical DSI data lanes are mapped
> -    to the logical lanes on the given platform. The value contained in
> -    index n describes what physical lane is mapped to the logical lane n
> -    (DATAn, where n lies between 0 and 3). The clock lane position is fixed
> -    and can't be changed. Hence, they aren't a part of the DT bindings. See
> -    [3] for more info on the data-lanes property.
> -
> -    For example:
> -
> -    data-lanes = <3 0 1 2>;
> -
> -    The above mapping describes that the logical data lane DATA0 is mapped to
> -    the physical data lane DATA3, logical DATA1 to physical DATA0, logic DATA2
> -    to phys DATA1 and logic DATA3 to phys DATA2.
> -
> -    There are only a limited number of physical to logical mappings possible:
> -    <0 1 2 3>
> -    <1 2 3 0>
> -    <2 3 0 1>
> -    <3 0 1 2>
> -    <0 3 2 1>
> -    <1 0 3 2>
> -    <2 1 0 3>
> -    <3 2 1 0>
> -
> -DSI PHY:
> -Required properties:
> -- compatible: Could be the following
> -  * "qcom,dsi-phy-28nm-hpm"
> -  * "qcom,dsi-phy-28nm-lp"
> -  * "qcom,dsi-phy-20nm"
> -  * "qcom,dsi-phy-28nm-8960"
> -  * "qcom,dsi-phy-14nm"
> -  * "qcom,dsi-phy-14nm-660"
> -  * "qcom,dsi-phy-10nm"
> -  * "qcom,dsi-phy-10nm-8998"
> -  * "qcom,dsi-phy-7nm"
> -  * "qcom,dsi-phy-7nm-8150"
> -- reg: Physical base address and length of the registers of PLL, PHY. Some
> -  revisions require the PHY regulator base address, whereas others require the
> -  PHY lane base address. See below for each PHY revision.
> -- reg-names: The names of register regions. The following regions are required:
> -  For DSI 28nm HPM/LP/8960 PHYs and 20nm PHY:
> -  * "dsi_pll"
> -  * "dsi_phy"
> -  * "dsi_phy_regulator"
> -  For DSI 14nm, 10nm and 7nm PHYs:
> -  * "dsi_pll"
> -  * "dsi_phy"
> -  * "dsi_phy_lane"
> -- clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating
> -  2 clocks: A byte clock (index 0), and a pixel clock (index 1).
> -- power-domains: Should be <&mmcc MDSS_GDSC>.
> -- clocks: Phandles to device clocks. See [1] for details on clock bindings.
> -- clock-names: the following clocks are required:
> -  * "iface"
> -  * "ref" (only required for new DTS files/entries)
> -  For 28nm HPM/LP, 28nm 8960 PHYs:
> -- vddio-supply: phandle to vdd-io regulator device node
> -  For 20nm PHY:
> -- vddio-supply: phandle to vdd-io regulator device node
> -- vcca-supply: phandle to vcca regulator device node
> -  For 14nm PHY:
> -- vcca-supply: phandle to vcca regulator device node
> -  For 10nm and 7nm PHY:
> -- vdds-supply: phandle to vdds regulator device node
> -
> -Optional properties:
> -- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
> -  regulator is wanted.
> -- qcom,mdss-mdp-transfer-time-us:	Specifies the dsi transfer time for command mode
> -					panels in microseconds. Driver uses this number to adjust
> -					the clock rate according to the expected transfer time.
> -					Increasing this value would slow down the mdp processing
> -					and can result in slower performance.
> -					Decreasing this value can speed up the mdp processing,
> -					but this can also impact power consumption.
> -					As a rule this time should not be higher than the time
> -					that would be expected with the processing at the
> -					dsi link rate since anyways this would be the maximum
> -					transfer time that could be achieved.
> -					If ping pong split is enabled, this time should not be higher
> -					than two times the dsi link rate time.
> -					If the property is not specified, then the default value is 14000 us.
> -
> -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> -[2] Documentation/devicetree/bindings/graph.txt
> -[3] Documentation/devicetree/bindings/media/video-interfaces.txt
> -[4] Documentation/devicetree/bindings/display/panel/
> -
> -Example:
> -	dsi0: dsi@fd922800 {
> -		compatible = "qcom,mdss-dsi-ctrl";
> -		qcom,dsi-host-index = <0>;
> -		interrupt-parent = <&mdp>;
> -		interrupts = <4 0>;
> -		reg-names = "dsi_ctrl";
> -		reg = <0xfd922800 0x200>;
> -		power-domains = <&mmcc MDSS_GDSC>;
> -		clock-names =
> -			"bus",
> -			"byte",
> -			"core",
> -			"core_mmss",
> -			"iface",
> -			"mdp_core",
> -			"pixel";
> -		clocks =
> -			<&mmcc MDSS_AXI_CLK>,
> -			<&mmcc MDSS_BYTE0_CLK>,
> -			<&mmcc MDSS_ESC0_CLK>,
> -			<&mmcc MMSS_MISC_AHB_CLK>,
> -			<&mmcc MDSS_AHB_CLK>,
> -			<&mmcc MDSS_MDP_CLK>,
> -			<&mmcc MDSS_PCLK0_CLK>;
> -
> -		assigned-clocks =
> -				 <&mmcc BYTE0_CLK_SRC>,
> -				 <&mmcc PCLK0_CLK_SRC>;
> -		assigned-clock-parents =
> -				 <&dsi_phy0 0>,
> -				 <&dsi_phy0 1>;
> -
> -		vdda-supply = <&pma8084_l2>;
> -		vdd-supply = <&pma8084_l22>;
> -		vddio-supply = <&pma8084_l12>;
> -
> -		phys = <&dsi_phy0>;
> -		phy-names ="dsi-phy";
> -
> -		qcom,dual-dsi-mode;
> -		qcom,master-dsi;
> -		qcom,sync-dual-dsi;
> -
> -		qcom,mdss-mdp-transfer-time-us = <12000>;
> -
> -		pinctrl-names = "default", "sleep";
> -		pinctrl-0 = <&dsi_active>;
> -		pinctrl-1 = <&dsi_suspend>;
> -
> -		ports {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -
> -			port@0 {
> -				reg = <0>;
> -				dsi0_in: endpoint {
> -					remote-endpoint = <&mdp_intf1_out>;
> -				};
> -			};
> -
> -			port@1 {
> -				reg = <1>;
> -				dsi0_out: endpoint {
> -					remote-endpoint = <&panel_in>;
> -					data-lanes = <0 1 2 3>;
> -				};
> -			};
> -		};
> -
> -		panel: panel@0 {
> -			compatible = "sharp,lq101r1sx01";
> -			reg = <0>;
> -			link2 = <&secondary>;
> -
> -			power-supply = <...>;
> -			backlight = <...>;
> -
> -			port {
> -				panel_in: endpoint {
> -					remote-endpoint = <&dsi0_out>;
> -				};
> -			};
> -		};
> -	};
> -
> -	dsi_phy0: dsi-phy@fd922a00 {
> -		compatible = "qcom,dsi-phy-28nm-hpm";
> -		qcom,dsi-phy-index = <0>;
> -		reg-names =
> -			"dsi_pll",
> -			"dsi_phy",
> -			"dsi_phy_regulator";
> -		reg =   <0xfd922a00 0xd4>,
> -			<0xfd922b00 0x2b0>,
> -			<0xfd922d80 0x7b>;
> -		clock-names = "iface";
> -		clocks = <&mmcc MDSS_AHB_CLK>;
> -		#clock-cells = <1>;
> -		vddio-supply = <&pma8084_l12>;
> -
> -		qcom,dsi-phy-regulator-ldo-mode;
> -	};
> -- 
> 2.7.4
> 

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v16 1/4] dt-bindings: msm: disp: add yaml schemas for DPU bindings
  2021-05-18 10:03 [PATCH v16 1/4] dt-bindings: msm: disp: add yaml schemas for DPU bindings Krishna Manikandan
                   ` (2 preceding siblings ...)
  2021-05-18 10:03 ` [PATCH v16 4/4] dt-bindings: msm/dp: Add bindings of MSM DisplayPort controller Krishna Manikandan
@ 2021-05-19 21:48 ` Rob Herring
  3 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2021-05-19 21:48 UTC (permalink / raw)
  To: Krishna Manikandan
  Cc: swboyd, robh+dt, khsieh, dianders, freedreno, kalyan_t,
	linux-kernel, linux-arm-msm, tanmay, devicetree, abhinavk,
	bjorn.andersson, sean, vinod.koul, dri-devel

On Tue, 18 May 2021 15:33:42 +0530, Krishna Manikandan wrote:
> MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks
> like DPU display controller, DSI etc. Add YAML schema
> for DPU device tree bindings.
> 
> Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
> 
> Changes in v2:
>     - Changed dpu to DPU (Sam Ravnborg)
>     - Fixed indentation issues (Sam Ravnborg)
>     - Added empty line between different properties (Sam Ravnborg)
>     - Replaced reference txt files with  their corresponding
>       yaml files (Sam Ravnborg)
>     - Modified the file to use "|" only when it is
>       necessary (Sam Ravnborg)
> 
> Changes in v3:
>     - Corrected the license used (Rob Herring)
>     - Added maxItems for properties (Rob Herring)
>     - Dropped generic descriptions (Rob Herring)
>     - Added ranges property (Rob Herring)
>     - Corrected the indendation (Rob Herring)
>     - Added additionalProperties (Rob Herring)
>     - Split dsi file into two, one for dsi controller
>       and another one for dsi phy per target (Rob Herring)
>     - Corrected description for pinctrl-names (Rob Herring)
>     - Corrected the examples used in yaml file (Rob Herring)
>     - Delete dsi.txt and dpu.txt (Rob Herring)
> 
> Changes in v4:
>     - Move schema up by one level (Rob Herring)
>     - Add patternProperties for mdp node (Rob Herring)
>     - Corrected description of some properties (Rob Herring)
> 
> Changes in v5:
>     - Correct the indentation (Rob Herring)
>     - Remove unnecessary description from properties (Rob Herring)
>     - Correct the number of interconnect entries (Rob Herring)
>     - Add interconnect names for sc7180 (Rob Herring)
>     - Add description for ports (Rob Herring)
>     - Remove common properties (Rob Herring)
>     - Add unevalutatedProperties (Rob Herring)
>     - Reference existing dsi controller yaml in the common
>       dsi controller file (Rob Herring)
>     - Correct the description of clock names to include only the
>       clocks that are required (Rob Herring)
>     - Remove properties which are already covered under the common
>       binding (Rob Herring)
>     - Add dsi phy supply nodes which are required for sc7180 and
>       sdm845 targets (Rob Herring)
>     - Add type ref for syscon-sfpb (Rob Herring)
> 
> Changes in v6:
>     - Fixed errors during dt_binding_check (Rob Herring)
>     - Add maxItems for phys and phys-names (Rob Herring)
>     - Use unevaluatedProperties wherever required (Rob Herring)
>     - Removed interrupt controller from required properties for
>       dsi controller (Rob Herring)
>     - Add constraints for dsi-phy reg-names based on the compatible
>       phy version (Rob Herring)
>     - Add constraints for dsi-phy supply nodes based on the
>       compatible phy version (Rob Herring)
> 
> Changes in v7:
>     - Add default value for qcom,mdss-mdp-transfer-time-us (Rob Herring)
>     - Modify the schema for data-lanes (Rob Herring)
>     - Split the phy schema into separate schemas based on
>       the phy version (Rob Herring)
> 
> Changes in v8:
>     - Resolve merge conflicts with latest dsi.txt file
>     - Include dp yaml change also in the same series
> 
> Changes in v9:
>     - Combine target specific dsi controller yaml files
>       to a single yaml file (Rob Herring)
>     - Combine target specific dsi phy yaml files into a
>       single yaml file (Rob Herring)
>     - Use unevaluatedProperties and additionalProperties
>       wherever required
>     - Remove duplicate properties from common yaml files
> 
> Changes in v10:
>     - Split the patch into separate patches for DPU, DSI and
>       PHY (Stephen Boyd)
>     - Drop unnecessary fullstop (Stephen Boyd)
>     - Add newline whereever required (Stephen Boyd)
>     - Add description for clock used (Stephen Boyd)
>     - Modify the description for interconnect entries  (Stephen Boyd)
>     - Drop assigned clock entries as it a generic property (Stephen Boyd)
>     - Correct the definition for interrupts (Stephen Boyd)
>     - Drop clock names from required properties (Stephen Boyd)
>     - Drop labels for display nodes from example (Stephen Boyd)
>     - Drop flags from interrupts entries (Stephen Boyd)
> 
> Changes in v11:
>     - Drop maxItems for clocks (Stephen Boyd)
> 
> Changes in v12:
>     - Add description for register property (Stephen Boyd)
>     - Add maxItems for interrupts (Stephen Boyd)
>     - Add description for iommus property (Stephen Boyd)
>     - Add description for interconnects (Stephen Boyd)
>     - Change display node name to display_controller (Stephen Boyd)
> 
> Changes in v13:
>     - Add maxItems for reg property (Stephen Boyd)
>     - Add ranges property in example (Stephen Boyd)
>     - Modify description for iommus property (Stephen Boyd)
>     - Add Dp bindings for ports in the same patch (Stephen Boyd)
>     - Remove soc from examples and change address and size cells
>       accordingly (Stephen Boyd)
>     - Add reference for ports
> 
> Changes in v14:
>     - Modify title for SC7180 and SDM845 yaml files (Stephen Boyd)
>     - Add required list for display-controller node (Stephen Boyd)
> 
> Changes in v16:
>     - Add reference for port (Rob Herring)
>     - Make additionalProperties as false (Rob Herring)
> ---
>  .../bindings/display/msm/dpu-sc7180.yaml           | 228 +++++++++++++++++++++
>  .../bindings/display/msm/dpu-sdm845.yaml           | 212 +++++++++++++++++++
>  .../devicetree/bindings/display/msm/dpu.txt        | 141 -------------
>  3 files changed, 440 insertions(+), 141 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
>  delete mode 100644 Documentation/devicetree/bindings/display/msm/dpu.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v16 3/4] dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings
  2021-05-18 10:03 ` [PATCH v16 3/4] dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings Krishna Manikandan
@ 2021-05-19 21:55   ` Rob Herring
  0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2021-05-19 21:55 UTC (permalink / raw)
  To: Krishna Manikandan
  Cc: dri-devel, swboyd, devicetree, khsieh, linux-arm-msm, sean,
	kalyan_t, tanmay, vinod.koul, robh+dt, bjorn.andersson,
	linux-kernel, freedreno, abhinavk, dianders

On Tue, 18 May 2021 15:33:44 +0530, Krishna Manikandan wrote:
> Add YAML schema for the device tree bindings for DSI PHY.
> 
> Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
> 
> Changes in v1:
>    - Merge dsi-phy.yaml and dsi-phy-10nm.yaml (Stephen Boyd)
>    - Remove qcom,dsi-phy-regulator-ldo-mode (Stephen Boyd)
>    - Add clock cells properly (Stephen Boyd)
>    - Remove unnecessary decription from clock names (Stephen Boyd)
>    - Add pin names for the supply entries for 10nm phy which is
>      used in sc7180 and sdm845 (Stephen Boyd)
>    - Remove unused header files from examples (Stephen Boyd)
>    - Drop labels for display nodes and correct node name (Stephen Boyd)
> 
> Changes in v2:
>    - Drop maxItems for clock (Stephen Boyd)
>    - Add vdds supply pin information for sdm845 (Stephen Boyd)
>    - Add examples for 14nm, 20nm and 28nm phy yaml files (Stephen Boyd)
>    - Keep child nodes directly under soc node (Stephen Boyd)
> 
> Changes in v3:
>    - Use a separate yaml file to describe the common properties
>      for all the dsi phy versions (Stephen Boyd)
>    - Remove soc from examples (Stephen Boyd)
>    - Add description for register property
> 
> Changes in v4:
>    - Modify the title for all the phy versions (Stephen Boyd)
>    - Drop description for all the phy versions (Stephen Boyd)
>    - Modify the description for register property (Stephen Boyd)
> 
> Changes in v5:
>    - Remove unused properties from common dsi phy file
>    - Add clock-cells and phy-cells to required property
>      list (Stephen Boyd)
> 
> Changes in v6:
>    - Add proper compatible string in example
> ---
>  .../bindings/display/msm/dsi-phy-10nm.yaml         | 68 +++++++++++++++++++++
>  .../bindings/display/msm/dsi-phy-14nm.yaml         | 66 ++++++++++++++++++++
>  .../bindings/display/msm/dsi-phy-20nm.yaml         | 71 ++++++++++++++++++++++
>  .../bindings/display/msm/dsi-phy-28nm.yaml         | 68 +++++++++++++++++++++
>  .../bindings/display/msm/dsi-phy-common.yaml       | 40 ++++++++++++
>  5 files changed, 313 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v16 4/4] dt-bindings: msm/dp: Add bindings of MSM DisplayPort controller
  2021-05-18 10:03 ` [PATCH v16 4/4] dt-bindings: msm/dp: Add bindings of MSM DisplayPort controller Krishna Manikandan
@ 2021-05-19 21:58   ` Rob Herring
  0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2021-05-19 21:58 UTC (permalink / raw)
  To: Krishna Manikandan
  Cc: dri-devel, linux-arm-msm, freedreno, devicetree, linux-kernel,
	kalyan_t, tanmay, abhinavk, robdclark, swboyd, bjorn.andersson,
	vinod.koul, dianders, khsieh, sean, Chandan Uddaraju, Vara Reddy

On Tue, May 18, 2021 at 03:33:45PM +0530, Krishna Manikandan wrote:
> Add bindings for Snapdragon DisplayPort controller driver.
> 
> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
> Signed-off-by: Vara Reddy <varar@codeaurora.org>
> Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
> Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
> 
> Changes in V2:
> -Provide details about sel-gpio
> 
> Changes in V4:
> -Provide details about max dp lanes
> -Change the commit text
> 
> Changes in V5:
> -moved dp.txt to yaml file
> 
> Changes in v6:
> - Squash all AUX LUT properties into one pattern Property
> - Make aux-cfg[0-9]-settings properties optional
> - Remove PLL/PHY bindings from DP controller dts
> - Add DP clocks description
> - Remove _clk suffix from clock names
> - Rename pixel clock to stream_pixel
> - Remove redundant bindings (GPIO, PHY, HDCP clock, etc..)
> - Fix indentation
> - Add Display Port as interface of DPU in DPU bindings
>   and add port mapping accordingly.
> 
> Chages in v7:
> - Add dp-controller.yaml file common between multiple SOC
> - Rename dp-sc7180.yaml to dp-controller-sc7180.yaml
> - change compatible string and add SOC name to it.
> - Remove Root clock generator for pixel clock
> - Add assigned-clocks and assigned-clock-parents bindings
> - Remove redundant properties, descriptions and blank lines
> - Add DP port in DPU bindings
> - Update depends-on tag in commit message and rebase change accordingly
> 
> Changes in v8:
> - Add MDSS AHB clock in bindings
> 
> Changes in v9:
> - Remove redundant reg-name property
> - Change assigned-clocks and assigned-clocks-parents counts to 2
> - Use IRQ flags in example dts
> 
> Changes in v10:
> - Change title of this patch as it does not contain PLL bindings anymore
> - Remove redundant properties
> - Remove use of IRQ flag
> - Fix ports property
> 
> Changes in v11:
> - add ports required of both #address-cells and  #size-cells
> - add required operating-points-v2
> - add required #sound-dai-cells
> - add required power-domains
> - update maintainer list
> 
> Changes in v12:
> - remove soc node from examples (Stephen Boyd)
> - split dpu-sc7180.yaml changes to separate patch (Stephen Boyd)
> 
> Changes in v13:
> - add assigned-clocks
> - add assigned-clock-parents
> 
> Changes in v14:
> - add reference for ports (Rob Herring)
> ---
>  .../bindings/display/msm/dp-controller.yaml        | 159 +++++++++++++++++++++
>  1 file changed, 159 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> new file mode 100644
> index 0000000..bcce567
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> @@ -0,0 +1,159 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/dp-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MSM Display Port Controller
> +
> +maintainers:
> +  - Kuogee Hsieh <khsieh@codeaurora.org>
> +
> +description: |
> +  Device tree bindings for DisplayPort host controller for MSM targets
> +  that are compatible with VESA DisplayPort interface specification.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,sc7180-dp
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: AHB clock to enable register access
> +      - description: Display Port AUX clock
> +      - description: Display Port Link clock
> +      - description: Link interface clock between DP and PHY
> +      - description: Display Port Pixel clock
> +
> +  clock-names:
> +    items:
> +      - const: core_iface
> +      - const: core_aux
> +      - const: ctrl_link
> +      - const: ctrl_link_iface
> +      - const: stream_pixel
> +
> +  assigned-clocks:
> +    items:
> +      - description: link clock source
> +      - description: pixel clock source
> +
> +  assigned-clock-parents:
> +    items:
> +      - description: phy 0 parent
> +      - description: phy 1 parent
> +
> +  phys:
> +    maxItems: 1
> +
> +  phy-names:
> +    items:
> +      - const: dp
> +
> +  operating-points-v2:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  "#sound-dai-cells":
> +    const: 0
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +    properties:
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 0

These 2 are covered by the common schema already. Drop

> +
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Input endpoint of the controller
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Output endpoint of the controller
> +
> +    required:
> +      - "#address-cells"
> +      - "#size-cells"

And this.

> +
> +    additionalProperties: false

Drop this too.

> +
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - phys
> +  - phy-names
> +  - "#sound-dai-cells"
> +  - power-domains
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
> +    #include <dt-bindings/power/qcom-aoss-qmp.h>
> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +
> +    displayport-controller@ae90000 {
> +        compatible = "qcom,sc7180-dp";
> +        reg = <0xae90000 0x1400>;
> +        interrupt-parent = <&mdss>;
> +        interrupts = <12>;
> +        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +                 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
> +                 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
> +                 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
> +                 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
> +        clock-names = "core_iface", "core_aux",
> +                      "ctrl_link",
> +                      "ctrl_link_iface", "stream_pixel";
> +
> +        assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
> +                          <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
> +
> +        assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
> +
> +        phys = <&dp_phy>;
> +        phy-names = "dp";
> +
> +        #sound-dai-cells = <0>;
> +
> +        power-domains = <&rpmhpd SC7180_CX>;
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +                endpoint {
> +                    remote-endpoint = <&dpu_intf0_out>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +                endpoint {
> +                    remote-endpoint = <&typec>;
> +                };
> +            };
> +        };
> +    };
> +...
> -- 
> 2.7.4
> 

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2021-05-19 21:58 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-18 10:03 [PATCH v16 1/4] dt-bindings: msm: disp: add yaml schemas for DPU bindings Krishna Manikandan
2021-05-18 10:03 ` [PATCH v16 2/4] dt-bindings: msm: dsi: add yaml schemas for DSI bindings Krishna Manikandan
2021-05-19 21:46   ` Rob Herring
2021-05-18 10:03 ` [PATCH v16 3/4] dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings Krishna Manikandan
2021-05-19 21:55   ` Rob Herring
2021-05-18 10:03 ` [PATCH v16 4/4] dt-bindings: msm/dp: Add bindings of MSM DisplayPort controller Krishna Manikandan
2021-05-19 21:58   ` Rob Herring
2021-05-19 21:48 ` [PATCH v16 1/4] dt-bindings: msm: disp: add yaml schemas for DPU bindings Rob Herring

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).