[PATCH 1/2] arm64: dts: qcom: Use consistent naming for dwc3 usb nodes for sm8150

[Bhupesh Sharma <bhupesh.sharma@linaro.org>]

The dwc3 usb nodes in sm8150.dtsi are currently named differently,
leading to some confusion when one sees the entries in sysfs or
dmesg:
[    1.943482] dwc3 a600000.usb: Adding to iommu group 1
[    2.266127] dwc3 a800000.dwc3: Adding to iommu group 2

Name both the nodes as dwc3@<addr> for consistency.

While at it also arrange the two usb controller, hs-phy and
ss-phy nodes closer in the dts for better readability.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 30 ++++++++++++++--------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 612dda0fef43..3be6d093a99b 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -2205,6 +2205,20 @@ glink-edge {
 			};
 		};
 
+		dc_noc: interconnect@9160000 {
+			compatible = "qcom,sm8150-dc-noc";
+			reg = <0 0x09160000 0 0x3200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@9680000 {
+			compatible = "qcom,sm8150-gem-noc";
+			reg = <0 0x09680000 0 0x3e200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		usb_1_hsphy: phy@88e2000 {
 			compatible = "qcom,sm8150-usb-hs-phy",
 				     "qcom,usb-snps-hs-7nm-phy";
@@ -2266,20 +2280,6 @@ usb_1_ssphy: lanes@88e9200 {
 			};
 		};
 
-		dc_noc: interconnect@9160000 {
-			compatible = "qcom,sm8150-dc-noc";
-			reg = <0 0x09160000 0 0x3200>;
-			#interconnect-cells = <1>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
-		gem_noc: interconnect@9680000 {
-			compatible = "qcom,sm8150-gem-noc";
-			reg = <0 0x09680000 0 0x3e200>;
-			#interconnect-cells = <1>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8150-qmp-usb3-uni-phy";
 			reg = <0 0x088eb000 0 0x200>;
@@ -2344,7 +2344,7 @@ usb_1: usb@a6f8800 {
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
-			usb_1_dwc3: usb@a600000 {
+			usb_1_dwc3: dwc3@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.31.1