[PATCH AUTOSEL 5.13 053/108] arm64: dts: qcom: sm8350: fix the node unit addresses

[PATCH AUTOSEL 5.13 053/108] arm64: dts: qcom: sm8350: fix the node unit addresses

[Sasha Levin]

From: Vinod Koul <vkoul@kernel.org>

[ Upstream commit 1dee9e3b0997fef7170f7ea2d8eab47d0cd334d8 ]

Some node unit addresses were put wrongly in the dts, resulting in
below warning when run with W=1

arch/arm64/boot/dts/qcom/sm8350.dtsi:693.34-702.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c222000: simple-bus unit address format error, expected "c263000"
arch/arm64/boot/dts/qcom/sm8350.dtsi:704.34-713.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c223000: simple-bus unit address format error, expected "c265000"
arch/arm64/boot/dts/qcom/sm8350.dtsi:1180.32-1185.5: Warning (simple_bus_reg): /soc@0/interconnect@90e0000: simple-bus unit address format error, expected "90c0000"

Fix by correcting to the correct address as given in reg node

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210513060733.382420-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index ed0b51bc03ea..a2382eb8619b 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -689,7 +689,7 @@ pdc: interrupt-controller@b220000 {
 			interrupt-controller;
 		};
 
-		tsens0: thermal-sensor@c222000 {
+		tsens0: thermal-sensor@c263000 {
 			compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
 			reg = <0 0x0c263000 0 0x1ff>, /* TM */
 			      <0 0x0c222000 0 0x8>; /* SROT */
@@ -700,7 +700,7 @@ tsens0: thermal-sensor@c222000 {
 			#thermal-sensor-cells = <1>;
 		};
 
-		tsens1: thermal-sensor@c223000 {
+		tsens1: thermal-sensor@c265000 {
 			compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
 			reg = <0 0x0c265000 0 0x1ff>, /* TM */
 			      <0 0x0c223000 0 0x8>; /* SROT */
@@ -1176,7 +1176,7 @@ usb_2_ssphy: phy@88ebe00 {
 			};
 		};
 
-		dc_noc: interconnect@90e0000 {
+		dc_noc: interconnect@90c0000 {
 			compatible = "qcom,sm8350-dc-noc";
 			reg = <0 0x090c0000 0 0x4200>;
 			#interconnect-cells = <1>;
-- 
2.30.2

[PATCH AUTOSEL 5.13 054/108] arm64: dts: qcom: msm8996: Make CPUCC actually probe (and work)

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@somainline.org>

[ Upstream commit 0a275a35ceab07cb622ff212c54d6866e246ac53 ]

Fix the compatible to make the driver probe and tell the
driver where to look for the "xo" clock to make sure everything
works.

Then we get a happy (eh, happier) 8996:

somainline-sdcard:/home/konrad# cat /sys/kernel/debug/clk/pwrcl_pll/clk_rate
1152000000

Don't backport without "arm64: dts: qcom: msm8996: Add CPU opps", as
the system fails to boot without consumers for these clocks.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210527192958.775434-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index ce430ba9c118..dd89d3cb772b 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1745,9 +1745,14 @@ apss_merge_funnel_out: endpoint {
 				};
 			};
 		};
+
 		kryocc: clock-controller@6400000 {
-			compatible = "qcom,apcc-msm8996";
+			compatible = "qcom,msm8996-apcc";
 			reg = <0x06400000 0x90000>;
+
+			clock-names = "xo";
+			clocks = <&xo_board>;
+
 			#clock-cells = <1>;
 		};
 
-- 
2.30.2

[PATCH AUTOSEL 5.13 055/108] arm64: dts: qcom: sm8250: fix display nodes

[Sasha Levin]

From: Jonathan Marek <jonathan@marek.ca>

[ Upstream commit dc5d91250ae6b810bc8d599d8d6590a06a4ce84a ]

Use sm8250 compatibles instead of sdm845 compatibles

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210329120051.3401567-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 4c0de12aaba6..75f9476109e6 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2370,7 +2370,7 @@ videocc: clock-controller@abf0000 {
 		};
 
 		mdss: mdss@ae00000 {
-			compatible = "qcom,sdm845-mdss";
+			compatible = "qcom,sm8250-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
 
@@ -2402,7 +2402,7 @@ mdss: mdss@ae00000 {
 			ranges;
 
 			mdss_mdp: mdp@ae01000 {
-				compatible = "qcom,sdm845-dpu";
+				compatible = "qcom,sm8250-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
 				      <0 0x0aeb0000 0 0x2008>;
 				reg-names = "mdp", "vbif";
-- 
2.30.2

[PATCH AUTOSEL 5.13 056/108] arm64: dts: qcom: sc7180: Move rmtfs memory region

[Sasha Levin]

From: Sujit Kautkar <sujitka@chromium.org>

[ Upstream commit d4282fb4f8f9683711ae6c076da16aa8e675fdbd ]

Move rmtfs memory region so that it does not overlap with system
RAM (kernel data) when KAsan is enabled. This puts rmtfs right
after mba_mem which is not supposed to increase beyond 0x94600000

Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
Link: https://lore.kernel.org/r/20210514113430.1.Ic2d032cd80424af229bb95e2c67dd4de1a70cb0c@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc7180-idp.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index e77a7926034a..afe0f9c25816 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -45,7 +45,7 @@ chosen {
 
 /* Increase the size from 2MB to 8MB */
 &rmtfs_mem {
-	reg = <0x0 0x84400000 0x0 0x800000>;
+	reg = <0x0 0x94600000 0x0 0x800000>;
 };
 
 / {
-- 
2.30.2

[PATCH AUTOSEL 5.13 080/108] arm64: dts: qcom: sc7180: Add wakeup delay for adau codec

[Sasha Levin]

From: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>

[ Upstream commit ba5f9b5d7ff3452e69275080c3d59265bc1db8ea ]

Add wakeup delay for fixing PoP noise during capture begin.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/20210513122429.25295-1-srivasam@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
index 4c6e433c8226..3eb8550da1fc 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -23,6 +23,7 @@ / {
 	adau7002: audio-codec-1 {
 		compatible = "adi,adau7002";
 		IOVDD-supply = <&pp1800_l15a>;
+		wakeup-delay-ms = <15>;
 		#sound-dai-cells = <0>;
 	};
 };
-- 
2.30.2

[PATCH AUTOSEL 5.13 093/108] arm64: dts: qcom: sm8250: Fix pcie2_lane unit address

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@somainline.org>

[ Upstream commit dc2f86369b157dfe4dccd31497d2e3c541e7239d ]

The previous one was likely a mistaken copy from pcie1_lane.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210613185334.306225-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 75f9476109e6..09b552396557 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1470,7 +1470,7 @@ pcie2_phy: phy@1c16000 {
 
 			status = "disabled";
 
-			pcie2_lane: lanes@1c0e200 {
+			pcie2_lane: lanes@1c16200 {
 				reg = <0 0x1c16200 0 0x170>, /* tx0 */
 				      <0 0x1c16400 0 0x200>, /* rx0 */
 				      <0 0x1c16a00 0 0x1f0>, /* pcs */
-- 
2.30.2

[PATCH AUTOSEL 5.13 094/108] arm64: dts: qcom: sm8150: Disable Adreno and modem by default

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@somainline.org>

[ Upstream commit b1dc3c6b3dabbedaf896a3c1a998da191c311c70 ]

Components that rely on proprietary (not to mention signed!) firmware should
not be enabled by default, as lack of the aforementioned firmware could cause
various issues, from random errors to straight-up failing to boot.

Not enabling modem back on the HDK, as it uses a sa8150.

Also fixed a sorting mistake in both boards' dt while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210611203301.101067-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 10 +++++++++-
 arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 10 +++++++++-
 arch/arm64/boot/dts/qcom/sm8150.dtsi    |  6 ++++++
 3 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index fb2cf3d987a1..50ee3bb97325 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -354,7 +354,11 @@ vreg_l6f_2p85: ldo6 {
 	};
 };
 
-&qupv3_id_1 {
+&gmu {
+	status = "okay";
+};
+
+&gpu {
 	status = "okay";
 };
 
@@ -372,6 +376,10 @@ resin {
 	};
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &remoteproc_adsp {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index 3774f8e63416..7de54b2e497e 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -349,7 +349,11 @@ vreg_l6f_2p85: ldo6 {
 	};
 };
 
-&qupv3_id_1 {
+&gmu {
+	status = "okay";
+};
+
+&gpu {
 	status = "okay";
 };
 
@@ -367,6 +371,10 @@ resin {
 	};
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &remoteproc_adsp {
 	status = "okay";
 	firmware-name = "qcom/sm8150/adsp.mdt";
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 51235a9521c2..618a1e64f808 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1082,6 +1082,8 @@ gpu: gpu@2c00000 {
 
 			qcom,gmu = <&gmu>;
 
+			status = "disabled";
+
 			zap-shader {
 				memory-region = <&gpu_mem>;
 			};
@@ -1149,6 +1151,8 @@ gmu: gmu@2c6a000 {
 
 			operating-points-v2 = <&gmu_opp_table>;
 
+			status = "disabled";
+
 			gmu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -1496,6 +1500,8 @@ remoteproc_mpss: remoteproc@4080000 {
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
+			status = "disabled";
+
 			glink-edge {
 				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
 				label = "modem";
-- 
2.30.2