[PATCH] arm64: dts: qcom: sdm845: mtp: Add vadc channels

[PATCH] arm64: dts: qcom: sdm845: mtp: Add vadc channels

[Bjorn Andersson]

Downstream defines four ADC channels related to thermal sensors external
to the PM8998 and two channels for internal voltage measurements. Add
these to the upstream SDM845 MTP as well.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 34 +++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 52dd7a858231..28a2f5d46db7 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -10,6 +10,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDM845 MTP";
@@ -469,6 +471,38 @@ &mss_pil {
 	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
 };
 
+&pm8998_adc {
+	adc-chan@4c {
+		reg = <ADC5_XO_THERM_100K_PU>;
+		label = "xo_therm";
+	};
+
+	adc-chan@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		label = "msm_therm";
+	};
+
+	adc-chan@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		label = "pa_therm1";
+	};
+
+	adc-chan@51 {
+		reg = <ADC5_AMUX_THM5_100K_PU>;
+		label = "quiet_therm";
+	};
+
+	adc-chan@83 {
+		reg = <ADC5_VPH_PWR>;
+		label = "vph_pwr";
+	};
+
+	adc-chan@85 {
+		reg = <ADC5_VCOIN>;
+		label = "vcoin";
+	};
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
-- 
2.29.2