* [PATCH v2 1/3] dt-bindings: phy: qcom,qusb2: Add missing vdd-supply
2021-09-28 2:19 [PATCH v2 0/3] Add missing vdd-supply for QUSB2 PHY Shawn Guo
@ 2021-09-28 2:20 ` Shawn Guo
2021-10-04 18:24 ` Rob Herring
2021-09-28 2:20 ` [PATCH v2 2/3] phy: qcom-qusb2: Add missing vdd supply Shawn Guo
` (2 subsequent siblings)
3 siblings, 1 reply; 10+ messages in thread
From: Shawn Guo @ 2021-09-28 2:20 UTC (permalink / raw)
To: Vinod Koul, Bjorn Andersson
Cc: AngeloGioacchino Del Regno, Konrad Dybcio, Jeffrey Hugo,
Jami Kettunen, linux-phy, devicetree, linux-arm-msm,
linux-kernel, Shawn Guo
Besides vdda-pll and vdda-phy-dpdm, vdd-supply is a required supply for
PHY digital circuit operation. Add it for correctness and completeness.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index ec9ccaaba098..e49fa4ce18c8 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -50,6 +50,10 @@ properties:
- const: ref
- const: iface
+ vdd-supply:
+ description:
+ Phandle to 0.9V regulator supply to PHY digital circuit.
+
vdda-pll-supply:
description:
Phandle to 1.8V regulator supply to PHY refclk pll block.
@@ -156,6 +160,7 @@ required:
- "#phy-cells"
- clocks
- clock-names
+ - vdd-supply
- vdda-pll-supply
- vdda-phy-dpdm-supply
- resets
@@ -174,6 +179,7 @@ examples:
<&gcc GCC_RX1_USB2_CLKREF_CLK>;
clock-names = "cfg_ahb", "ref";
+ vdd-supply = <&pm8994_l28>;
vdda-pll-supply = <&pm8994_l12>;
vdda-phy-dpdm-supply = <&pm8994_l24>;
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2 1/3] dt-bindings: phy: qcom,qusb2: Add missing vdd-supply
2021-09-28 2:20 ` [PATCH v2 1/3] dt-bindings: phy: qcom,qusb2: Add missing vdd-supply Shawn Guo
@ 2021-10-04 18:24 ` Rob Herring
0 siblings, 0 replies; 10+ messages in thread
From: Rob Herring @ 2021-10-04 18:24 UTC (permalink / raw)
To: Shawn Guo
Cc: Jami Kettunen, Jeffrey Hugo, AngeloGioacchino Del Regno,
linux-arm-msm, devicetree, Konrad Dybcio, linux-phy,
Bjorn Andersson, linux-kernel, Vinod Koul
On Tue, 28 Sep 2021 10:20:00 +0800, Shawn Guo wrote:
> Besides vdda-pll and vdda-phy-dpdm, vdd-supply is a required supply for
> PHY digital circuit operation. Add it for correctness and completeness.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
> Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 6 ++++++
> 1 file changed, 6 insertions(+)
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 2/3] phy: qcom-qusb2: Add missing vdd supply
2021-09-28 2:19 [PATCH v2 0/3] Add missing vdd-supply for QUSB2 PHY Shawn Guo
2021-09-28 2:20 ` [PATCH v2 1/3] dt-bindings: phy: qcom,qusb2: Add missing vdd-supply Shawn Guo
@ 2021-09-28 2:20 ` Shawn Guo
2021-09-28 2:20 ` [PATCH v2 3/3] arm64: dts: qcom: Add missing vdd-supply for QUSB2 PHY Shawn Guo
2021-10-01 8:16 ` [PATCH v2 0/3] " Vinod Koul
3 siblings, 0 replies; 10+ messages in thread
From: Shawn Guo @ 2021-09-28 2:20 UTC (permalink / raw)
To: Vinod Koul, Bjorn Andersson
Cc: AngeloGioacchino Del Regno, Konrad Dybcio, Jeffrey Hugo,
Jami Kettunen, linux-phy, devicetree, linux-arm-msm,
linux-kernel, Shawn Guo
Per downstream kernel, beside vdda-pll and vdda-phy-dpdm, vdd is also a
required supply for QUSB2 PHY digital circuit operation. The driver
works right now likely because firmware already sets it up. Add it for
correctness and completeness.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qusb2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 3c1d3b71c825..02845e08dac0 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -371,7 +371,7 @@ static const struct qusb2_phy_cfg sm6115_phy_cfg = {
};
static const char * const qusb2_phy_vreg_names[] = {
- "vdda-pll", "vdda-phy-dpdm",
+ "vdd", "vdda-pll", "vdda-phy-dpdm",
};
#define QUSB2_NUM_VREGS ARRAY_SIZE(qusb2_phy_vreg_names)
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 3/3] arm64: dts: qcom: Add missing vdd-supply for QUSB2 PHY
2021-09-28 2:19 [PATCH v2 0/3] Add missing vdd-supply for QUSB2 PHY Shawn Guo
2021-09-28 2:20 ` [PATCH v2 1/3] dt-bindings: phy: qcom,qusb2: Add missing vdd-supply Shawn Guo
2021-09-28 2:20 ` [PATCH v2 2/3] phy: qcom-qusb2: Add missing vdd supply Shawn Guo
@ 2021-09-28 2:20 ` Shawn Guo
2021-10-05 7:49 ` Vinod Koul
2021-11-20 23:55 ` (subset) " Bjorn Andersson
2021-10-01 8:16 ` [PATCH v2 0/3] " Vinod Koul
3 siblings, 2 replies; 10+ messages in thread
From: Shawn Guo @ 2021-09-28 2:20 UTC (permalink / raw)
To: Vinod Koul, Bjorn Andersson
Cc: AngeloGioacchino Del Regno, Konrad Dybcio, Jeffrey Hugo,
Jami Kettunen, linux-phy, devicetree, linux-arm-msm,
linux-kernel, Shawn Guo
QUSB2 PHY requires vdd-supply for digital circuit operation. Add it for
platforms that miss it.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 2 ++
arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 1 +
arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 1 +
arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi | 1 +
4 files changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 51e17094d7b1..d9826ce27e50 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -230,6 +230,7 @@
&hsusb_phy1 {
status = "okay";
+ vdd-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
};
@@ -237,6 +238,7 @@
&hsusb_phy2 {
status = "okay";
+ vdd-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
index 507396c4d23b..61ea6d4ef8ac 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -184,6 +184,7 @@
&hsusb_phy1 {
status = "okay";
+ vdd-supply = <&pm8994_l28>;
vdda-pll-supply = <&pm8994_l12>;
vdda-phy-dpdm-supply = <&pm8994_l24>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
index 125d7923d713..4f823974559b 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -102,6 +102,7 @@
&qusb2phy {
status = "okay";
+ vdd-supply = <&vreg_l1a_0p875>;
vdda-pll-supply = <&vreg_l12a_1p8>;
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
index 0f5c7828a901..243f4ee5da8c 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -260,6 +260,7 @@
&qusb2phy {
status = "okay";
+ vdd-supply = <&vreg_l1a_0p875>;
vdda-pll-supply = <&vreg_l12a_1p8>;
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
};
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2 3/3] arm64: dts: qcom: Add missing vdd-supply for QUSB2 PHY
2021-09-28 2:20 ` [PATCH v2 3/3] arm64: dts: qcom: Add missing vdd-supply for QUSB2 PHY Shawn Guo
@ 2021-10-05 7:49 ` Vinod Koul
2021-11-20 23:55 ` (subset) " Bjorn Andersson
1 sibling, 0 replies; 10+ messages in thread
From: Vinod Koul @ 2021-10-05 7:49 UTC (permalink / raw)
To: Shawn Guo
Cc: Bjorn Andersson, AngeloGioacchino Del Regno, Konrad Dybcio,
Jeffrey Hugo, Jami Kettunen, linux-phy, devicetree,
linux-arm-msm, linux-kernel
On 28-09-21, 10:20, Shawn Guo wrote:
> QUSB2 PHY requires vdd-supply for digital circuit operation. Add it for
> platforms that miss it.
Acked-By: Vinod Koul <vkoul@kernel.org>
Bjorn, I have picked 1,2 feel free to pick this
--
~Vinod
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: (subset) [PATCH v2 3/3] arm64: dts: qcom: Add missing vdd-supply for QUSB2 PHY
2021-09-28 2:20 ` [PATCH v2 3/3] arm64: dts: qcom: Add missing vdd-supply for QUSB2 PHY Shawn Guo
2021-10-05 7:49 ` Vinod Koul
@ 2021-11-20 23:55 ` Bjorn Andersson
1 sibling, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2021-11-20 23:55 UTC (permalink / raw)
To: Vinod Koul, Shawn Guo
Cc: linux-arm-msm, Konrad Dybcio, linux-kernel, devicetree,
Jami Kettunen, Jeffrey Hugo, AngeloGioacchino Del Regno,
linux-phy
On Tue, 28 Sep 2021 10:20:02 +0800, Shawn Guo wrote:
> QUSB2 PHY requires vdd-supply for digital circuit operation. Add it for
> platforms that miss it.
>
>
Applied, thanks!
[3/3] arm64: dts: qcom: Add missing vdd-supply for QUSB2 PHY
commit: 5663ca59bb4f1dfd2501f2af0bfdca93c4d47b3a
Best regards,
--
Bjorn Andersson <bjorn.andersson@linaro.org>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 0/3] Add missing vdd-supply for QUSB2 PHY
2021-09-28 2:19 [PATCH v2 0/3] Add missing vdd-supply for QUSB2 PHY Shawn Guo
` (2 preceding siblings ...)
2021-09-28 2:20 ` [PATCH v2 3/3] arm64: dts: qcom: Add missing vdd-supply for QUSB2 PHY Shawn Guo
@ 2021-10-01 8:16 ` Vinod Koul
2021-10-04 3:01 ` Shawn Guo
3 siblings, 1 reply; 10+ messages in thread
From: Vinod Koul @ 2021-10-01 8:16 UTC (permalink / raw)
To: Shawn Guo
Cc: Bjorn Andersson, AngeloGioacchino Del Regno, Konrad Dybcio,
Jeffrey Hugo, Jami Kettunen, linux-phy, devicetree,
linux-arm-msm, linux-kernel
Hi Shawn,
On 28-09-21, 10:19, Shawn Guo wrote:
> The series adds missing vdd-supply for QUSB2 PHY which is required for
> digital circuit. The driver works right now likely because firmware
> already sets it up. Add it to bindings, driver and DTS that miss the
> supply.
>
> It should not cause problem for existing DTBs:
> - SC7180, SDM630, SDM845 based platforms already specified vdd-supply
> in the DTBs.
> - MSM8996 and MSM8998 platform DTBs miss vdd-supply, but dummy regulator
> will ensure QUSB2 PHY driver works as before on these platforms.
What about the rest.. I checked SM8350 and SM8250 mtp ones are missing
this. With the property made mandatory, I guess it would cause these to
fail right..
>
> Changes for v2:
> - Correct copy & paste error on vdd-supply name in bindings doc.
>
>
> Shawn Guo (3):
> dt-bindings: phy: qcom,qusb2: Add missing vdd-supply
> phy: qcom-qusb2: Add missing vdd supply
> arm64: dts: qcom: Add missing vdd-supply for QUSB2 PHY
>
> Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 6 ++++++
> arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 2 ++
> arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 1 +
> arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 1 +
> arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi | 1 +
> drivers/phy/qualcomm/phy-qcom-qusb2.c | 2 +-
> 6 files changed, 12 insertions(+), 1 deletion(-)
>
> --
> 2.17.1
--
~Vinod
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 0/3] Add missing vdd-supply for QUSB2 PHY
2021-10-01 8:16 ` [PATCH v2 0/3] " Vinod Koul
@ 2021-10-04 3:01 ` Shawn Guo
2021-10-05 7:47 ` Vinod Koul
0 siblings, 1 reply; 10+ messages in thread
From: Shawn Guo @ 2021-10-04 3:01 UTC (permalink / raw)
To: Vinod Koul
Cc: Bjorn Andersson, AngeloGioacchino Del Regno, Konrad Dybcio,
Jeffrey Hugo, Jami Kettunen, linux-phy, devicetree,
linux-arm-msm, linux-kernel
Hi Vinod,
On Fri, Oct 01, 2021 at 01:46:23PM +0530, Vinod Koul wrote:
> Hi Shawn,
>
> On 28-09-21, 10:19, Shawn Guo wrote:
> > The series adds missing vdd-supply for QUSB2 PHY which is required for
> > digital circuit. The driver works right now likely because firmware
> > already sets it up. Add it to bindings, driver and DTS that miss the
> > supply.
> >
> > It should not cause problem for existing DTBs:
> > - SC7180, SDM630, SDM845 based platforms already specified vdd-supply
> > in the DTBs.
> > - MSM8996 and MSM8998 platform DTBs miss vdd-supply, but dummy regulator
> > will ensure QUSB2 PHY driver works as before on these platforms.
>
> What about the rest.. I checked SM8350 and SM8250 mtp ones are missing
> this. With the property made mandatory, I guess it would cause these to
> fail right..
From what I can see, SM8350 and SM8250 use qcom-snps-femto-v2 PHY
rather than qcom-qusb2. So they should not be affected by this series.
Shawn
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 0/3] Add missing vdd-supply for QUSB2 PHY
2021-10-04 3:01 ` Shawn Guo
@ 2021-10-05 7:47 ` Vinod Koul
0 siblings, 0 replies; 10+ messages in thread
From: Vinod Koul @ 2021-10-05 7:47 UTC (permalink / raw)
To: Shawn Guo
Cc: Bjorn Andersson, AngeloGioacchino Del Regno, Konrad Dybcio,
Jeffrey Hugo, Jami Kettunen, linux-phy, devicetree,
linux-arm-msm, linux-kernel
On 04-10-21, 11:01, Shawn Guo wrote:
> Hi Vinod,
>
> On Fri, Oct 01, 2021 at 01:46:23PM +0530, Vinod Koul wrote:
> > Hi Shawn,
> >
> > On 28-09-21, 10:19, Shawn Guo wrote:
> > > The series adds missing vdd-supply for QUSB2 PHY which is required for
> > > digital circuit. The driver works right now likely because firmware
> > > already sets it up. Add it to bindings, driver and DTS that miss the
> > > supply.
> > >
> > > It should not cause problem for existing DTBs:
> > > - SC7180, SDM630, SDM845 based platforms already specified vdd-supply
> > > in the DTBs.
> > > - MSM8996 and MSM8998 platform DTBs miss vdd-supply, but dummy regulator
> > > will ensure QUSB2 PHY driver works as before on these platforms.
> >
> > What about the rest.. I checked SM8350 and SM8250 mtp ones are missing
> > this. With the property made mandatory, I guess it would cause these to
> > fail right..
>
> >From what I can see, SM8350 and SM8250 use qcom-snps-femto-v2 PHY
> rather than qcom-qusb2. So they should not be affected by this series.
Right, somehow I seem to have overlooked that part :(
I am applying this now, thanks
--
~Vinod
^ permalink raw reply [flat|nested] 10+ messages in thread