* [PATCH] ARM: dts: qcom: correct mmc node naming
@ 2021-10-20 20:14 David Heidelberg
0 siblings, 0 replies; only message in thread
From: David Heidelberg @ 2021-10-20 20:14 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Rob Herring
Cc: ~okias/devicetree, David Heidelberg, linux-arm-msm, devicetree,
linux-kernel
MMC nodes has to be named mmc@ to comply with dt-bindings.
Fix warnings as:
arch/arm/boot/dts/qcom-msm8660-surf.dt.yaml: sdcc@12400000: $nodename:0: 'sdcc@12400000' does not match '^mmc(@.*)?$'
From schema: Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
---
arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 6 +++---
arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 2 +-
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 6 +++---
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 6 +++---
arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts | 4 ++--
arch/arm/boot/dts/qcom-apq8064.dtsi | 6 +++---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ++--
arch/arm/boot/dts/qcom-mdm9615.dtsi | 4 ++--
arch/arm/boot/dts/qcom-msm8660-surf.dts | 4 ++--
arch/arm/boot/dts/qcom-msm8660.dtsi | 10 +++++-----
arch/arm/boot/dts/qcom-msm8960-cdp.dts | 4 ++--
arch/arm/boot/dts/qcom-msm8960.dtsi | 4 ++--
12 files changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 5bedbb902ad5..d664ccd454c5 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -899,7 +899,7 @@ ncp {
};
amba {
/* Internal 3.69 GiB eMMC */
- sdcc@12400000 {
+ mmc@12400000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dragon_sdcc1_pins>;
@@ -908,7 +908,7 @@ sdcc@12400000 {
};
/* External micro SD card, directly connected, pulled up to 2.85 V */
- sdcc@12180000 {
+ mmc@12180000 {
status = "okay";
/* Enable SSBI GPIO 22 as input, use for card detect */
pinctrl-names = "default";
@@ -922,7 +922,7 @@ sdcc@12180000 {
* Second external micro SD card, using two TXB104RGYR levelshifters
* to lift from 1.8 V to 2.85 V
*/
- sdcc@12200000 {
+ mmc@12200000 {
status = "okay";
/* Enable SSBI GPIO 26 as input, use for card detect */
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index 197494ef887b..b2cd32f440e0 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -367,7 +367,7 @@ phy {
amba {
/* eMMC */
- sdcc@12400000 {
+ mmc@12400000 {
status = "okay";
vmmc-supply = <&pm8921_l5>;
vqmmc-supply = <&pm8921_s4>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 0148148a8e0a..e068a8d0adf0 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -220,14 +220,14 @@ pci@1b500000 {
amba {
/* eMMC */
- sdcc1: sdcc@12400000 {
+ sdcc1: mmc@12400000 {
status = "okay";
vmmc-supply = <&pm8921_l5>;
vqmmc-supply = <&pm8921_s4>;
};
/* External micro SD card */
- sdcc3: sdcc@12180000 {
+ sdcc3: mmc@12180000 {
status = "okay";
vmmc-supply = <&v3p3_fixed>;
pinctrl-names = "default";
@@ -235,7 +235,7 @@ sdcc3: sdcc@12180000 {
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
};
/* WLAN */
- sdcc4: sdcc@121c0000 {
+ sdcc4: mmc@121c0000 {
status = "okay";
vmmc-supply = <&v3p3_fixed>;
vqmmc-supply = <&v3p3_fixed>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index d0a17b5a5fa3..2638b380be20 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -314,14 +314,14 @@ pios {
amba {
/* eMMC */
- sdcc1: sdcc@12400000 {
+ sdcc1: mmc@12400000 {
status = "okay";
vmmc-supply = <&pm8921_l5>;
vqmmc-supply = <&pm8921_s4>;
};
/* External micro SD card */
- sdcc3: sdcc@12180000 {
+ sdcc3: mmc@12180000 {
status = "okay";
vmmc-supply = <&pm8921_l6>;
pinctrl-names = "default";
@@ -329,7 +329,7 @@ sdcc3: sdcc@12180000 {
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
};
/* WLAN */
- sdcc4: sdcc@121c0000 {
+ sdcc4: mmc@121c0000 {
status = "okay";
vmmc-supply = <&ext_3p3v>;
vqmmc-supply = <&pm8921_lvs1>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
index 72e47bdc5c12..f8c97efc61fc 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -374,14 +374,14 @@ serial@1a240000 {
};
amba {
- sdcc1: sdcc@12400000 {
+ sdcc1: mmc@12400000 {
status = "okay";
vmmc-supply = <&pm8921_l5>;
vqmmc-supply = <&pm8921_s4>;
};
- sdcc3: sdcc@12180000 {
+ sdcc3: mmc@12180000 {
status = "okay";
vmmc-supply = <&pm8921_l6>;
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 8a389323a474..ed1cd2c529cc 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1073,7 +1073,7 @@ amba {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- sdcc1: sdcc@12400000 {
+ sdcc1: mmc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
pinctrl-names = "default";
@@ -1093,7 +1093,7 @@ sdcc1: sdcc@12400000 {
dma-names = "tx", "rx";
};
- sdcc3: sdcc@12180000 {
+ sdcc3: mmc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
@@ -1111,7 +1111,7 @@ sdcc3: sdcc@12180000 {
dma-names = "tx", "rx";
};
- sdcc4: sdcc@121c0000 {
+ sdcc4: mmc@121c0000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 110113f3b8e2..7f67b282da10 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1181,7 +1181,7 @@ amba: amba {
#size-cells = <1>;
ranges;
- sdcc1: sdcc@12400000 {
+ sdcc1: mmc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
@@ -1201,7 +1201,7 @@ sdcc1: sdcc@12400000 {
dma-names = "tx", "rx";
};
- sdcc3: sdcc@12180000 {
+ sdcc3: mmc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 6e90c5d5a050..c32415f0e66d 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -354,7 +354,7 @@ amba {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- sdcc1: sdcc@12180000 {
+ sdcc1: mmc@12180000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
@@ -374,7 +374,7 @@ sdcc1: sdcc@12180000 {
assigned-clock-rates = <400000>;
};
- sdcc2: sdcc@12140000 {
+ sdcc2: mmc@12140000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index 6a321ccb0bd0..414280d9bdba 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -35,13 +35,13 @@ vsdcc_fixed: vsdcc-regulator {
amba {
/* eMMC */
- sdcc1: sdcc@12400000 {
+ sdcc1: mmc@12400000 {
status = "okay";
vmmc-supply = <&vsdcc_fixed>;
};
/* External micro SD card */
- sdcc3: sdcc@12180000 {
+ sdcc3: mmc@12180000 {
status = "okay";
vmmc-supply = <&vsdcc_fixed>;
};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 21cb58ab68ac..1e8aab357f9c 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -483,7 +483,7 @@ amba {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- sdcc1: sdcc@12400000 {
+ sdcc1: mmc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
@@ -499,7 +499,7 @@ sdcc1: sdcc@12400000 {
cap-mmc-highspeed;
};
- sdcc2: sdcc@12140000 {
+ sdcc2: mmc@12140000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
@@ -514,7 +514,7 @@ sdcc2: sdcc@12140000 {
cap-mmc-highspeed;
};
- sdcc3: sdcc@12180000 {
+ sdcc3: mmc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
@@ -530,7 +530,7 @@ sdcc3: sdcc@12180000 {
no-1-8-v;
};
- sdcc4: sdcc@121c0000 {
+ sdcc4: mmc@121c0000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
@@ -545,7 +545,7 @@ sdcc4: sdcc@121c0000 {
cap-mmc-highspeed;
};
- sdcc5: sdcc@12200000 {
+ sdcc5: mmc@12200000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index e7d2e937ea4c..4af01039c3b2 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -26,12 +26,12 @@ serial@16440000 {
amba {
/* eMMC */
- sdcc1: sdcc@12400000 {
+ sdcc1: mmc@12400000 {
status = "okay";
};
/* External micro SD card */
- sdcc3: sdcc@12180000 {
+ sdcc3: mmc@12180000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 172ea3c70eac..2a0ec97a264f 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -263,7 +263,7 @@ amba {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- sdcc1: sdcc@12400000 {
+ sdcc1: mmc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
@@ -280,7 +280,7 @@ sdcc1: sdcc@12400000 {
vmmc-supply = <&vsdcc_fixed>;
};
- sdcc3: sdcc@12180000 {
+ sdcc3: mmc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
--
2.33.0
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2021-10-20 20:14 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-20 20:14 [PATCH] ARM: dts: qcom: correct mmc node naming David Heidelberg
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).