From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: linux@roeck-us.net, heikki.krogerus@linux.intel.com,
rdunlap@infradead.org, gregkh@linuxfoundation.org,
bjorn.andersson@linaro.org, robh+dt@kernel.org,
linux-usb@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org
Cc: wcheng@codeaurora.org, bryan.odonoghue@linaro.org
Subject: [RESEND PATCH v2 4/7] dt-bindings: usb: Add Qualcomm PMIC PDPHY controller YAML schema
Date: Thu, 28 Oct 2021 17:49:38 +0100 [thread overview]
Message-ID: <20211028164941.831918-5-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20211028164941.831918-1-bryan.odonoghue@linaro.org>
Add a YAML binding for the power-delivery PHY silicon interface inside
Qualcomm's pm8150b hardware block.
The pdphy driver operates with a type-c driver inside of a high level
single TCPM device to provide overall TCPM functionality.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
.../bindings/usb/qcom,pmic-pdphy.yaml | 115 ++++++++++++++++++
1 file changed, 115 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-pdphy.yaml
diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-pdphy.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-pdphy.yaml
new file mode 100644
index 0000000000000..9110f6203b87f
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,pmic-pdphy.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/qcom,pmic-pdphy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm PMIC based USB PDPHY driver
+
+maintainers:
+ - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+ Qualcomm PMIC Power Delivery PHY driver
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8150b-pdphy
+
+ reg:
+ maxItems: 1
+ description: PDPHY base address
+
+ interrupts:
+ items:
+ - description: Sig TX - transmitted reset signal
+ - description: Sig RX - received reset signal
+ - description: TX completion
+ - description: RX completion
+ - description: TX fail
+ - description: TX discgard
+ - description: RX discgard
+ - description: Fast Role Swap event
+
+ interrupt-names:
+ items:
+ - const: pmic-pdphy-sig-tx
+ - const: pmic-pdphy-sig-rx
+ - const: pmic-pdphy-msg-tx
+ - const: pmic-pdphy-msg-rx
+ - const: pmic-pdphy-msg-tx-failed
+ - const: pmic-pdphy-msg-tx-discarded
+ - const: pmic-pdphy-msg-rx-discarded
+ - const: pmic-pdphy-fr-swap
+
+ ports:
+ description: Remote endpoint connections
+ $ref: /connector/usb-connector.yaml#/properties/ports
+
+ properties:
+ port@0:
+ description: Remote endpoints for the TCPM driver
+
+ required:
+ - port@0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/usb/typec/tcpm/qcom,pmic-usb-pdphy.h>
+
+ pm8150b {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8150b_pdphy: pdphy@1700 {
+ compatible = "qcom,pm8150b-pdphy";
+ reg = <0x1700>;
+ interrupts = <0x2 0x17 PMIC_PDPHY_SIG_TX_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 PMIC_PDPHY_SIG_RX_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 PMIC_PDPHY_MSG_TX_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 PMIC_PDPHY_MSG_RX_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 PMIC_PDPHY_MSG_TX_FAIL_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 PMIC_PDPHY_MSG_TX_DISCARD_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 PMIC_PDPHY_MSG_RX_DISCARD_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 PMIC_PDPHY_FR_SWAP_IRQ
+ IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "pmic-pdphy-sig-tx",
+ "pmic-pdphy-sig-rx",
+ "pmic-pdphy-msg-tx",
+ "pmic-pdphy-msg-rx",
+ "pmic-pdphy-msg-tx-failed",
+ "pmic-pdphy-msg-tx-discarded",
+ "pmic-pdphy-msg-rx-discarded",
+ "pmic-pdphy-fr-swap";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ pmic_pdphy: endpoint {
+ remote-endpoint = <&pmic_tcpm_pdphy>;
+ };
+ };
+ };
+ };
+ };
+...
--
2.33.0
next prev parent reply other threads:[~2021-10-28 16:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-28 16:49 [RESEND PATCH v2 0/7] Add pm8150b TPCM driver Bryan O'Donoghue
2021-10-28 16:49 ` [RESEND PATCH v2 1/7] dt-bindings: usb: Add qcom,pmic-usb-typec dt-binding header Bryan O'Donoghue
2021-10-28 16:49 ` [RESEND PATCH v2 2/7] dt-bindings: usb: Add Qualcomm PMIC type C controller YAML schema Bryan O'Donoghue
2021-10-28 19:08 ` Rob Herring
2021-10-28 20:38 ` Rob Herring
2021-10-28 16:49 ` [RESEND PATCH v2 3/7] dt-bindings: usb: Add qcom,pmic-usb-pdphy dt-binding header Bryan O'Donoghue
2021-10-28 16:49 ` Bryan O'Donoghue [this message]
2021-10-28 19:08 ` [RESEND PATCH v2 4/7] dt-bindings: usb: Add Qualcomm PMIC PDPHY controller YAML schema Rob Herring
2021-10-28 20:39 ` Rob Herring
2021-10-28 16:49 ` [RESEND PATCH v2 5/7] dt-bindings: usb: Add Qualcomm PMIC TCPM " Bryan O'Donoghue
2021-10-28 20:43 ` Rob Herring
2021-10-28 21:46 ` Bryan O'Donoghue
2021-10-28 21:52 ` Bryan O'Donoghue
2021-10-28 16:49 ` [RESEND PATCH v2 6/7] usb: typec: qcom: Remove standalone qcom pm8150b typec driver Bryan O'Donoghue
2021-10-28 16:49 ` [RESEND PATCH v2 7/7] usb: typec: qcom: Add a pm8150b TCPM driver Bryan O'Donoghue
2021-10-29 16:40 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211028164941.831918-5-bryan.odonoghue@linaro.org \
--to=bryan.odonoghue@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=rdunlap@infradead.org \
--cc=robh+dt@kernel.org \
--cc=wcheng@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).