linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Vinod Koul <vkoul@kernel.org>,
	linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: [PATCH v2 6/7] arm: dts: qcom-*: replace deprecated perst-gpio with perst-gpios
Date: Sat, 23 Apr 2022 00:10:01 +0300	[thread overview]
Message-ID: <20220422211002.2012070-7-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20220422211002.2012070-1-dmitry.baryshkov@linaro.org>

Replace deprecated perst-gpio properties with up-to-date perst-gpios
in the arm32 Qualcomm Snapdragon device trees.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts     | 2 +-
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts      | 2 +-
 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi   | 2 +-
 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 2 +-
 arch/arm/boot/dts/qcom-ipq8064.dtsi             | 6 +++---
 5 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index e068a8d0adf0..160291c5ebeb 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -215,7 +215,7 @@ pci@1b500000 {
 			vdda_refclk-supply = <&v3p3_fixed>;
 			pinctrl-0 = <&pcie_pins>;
 			pinctrl-names = "default";
-			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
 		};
 
 		amba {
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 2638b380be20..8b1d540a5f65 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -285,7 +285,7 @@ pci@1b500000 {
 			vdda_refclk-supply = <&ext_3p3v>;
 			pinctrl-0 = <&pcie_pins>;
 			pinctrl-names = "default";
-			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
 		};
 
 		qcom,ssbi@500000 {
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
index 7a337dc08741..872f64a12047 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -100,7 +100,7 @@ m25p80@0 {
 
 		pci@40000000 {
 			status = "okay";
-			perst-gpio = <&tlmm 38 0x1>;
+			perst-gpios = <&tlmm 38 0x1>;
 		};
 
 		qpic-nand@79b0000 {
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
index 06f9f2cb2fe9..ab1835b0fe40 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -10,7 +10,7 @@ / {
 	soc {
 		pci@40000000 {
 			status = "okay";
-			perst-gpio = <&tlmm 38 0x1>;
+			perst-gpios = <&tlmm 38 0x1>;
 		};
 
 		spi@78b6000 {
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 996f4458d9fc..fa67cb6adcb8 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -842,7 +842,7 @@ pcie0: pci@1b500000 {
 			pinctrl-names = "default";
 
 			status = "disabled";
-			perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
 		};
 
 		pcie1: pci@1b700000 {
@@ -893,7 +893,7 @@ pcie1: pci@1b700000 {
 			pinctrl-names = "default";
 
 			status = "disabled";
-			perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
 		};
 
 		pcie2: pci@1b900000 {
@@ -944,7 +944,7 @@ pcie2: pci@1b900000 {
 			pinctrl-names = "default";
 
 			status = "disabled";
-			perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
 		};
 
 		nss_common: syscon@03000000 {
-- 
2.35.1


  parent reply	other threads:[~2022-04-22 22:17 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-22 21:09 [PATCH v2 0/7] dt-bindings: YAMLify pci/qcom,pcie schema Dmitry Baryshkov
2022-04-22 21:09 ` [PATCH v2 1/7] dt-bindings: pci/qcom,pcie: convert to YAML Dmitry Baryshkov
2022-04-23 17:42   ` Krzysztof Kozlowski
2022-04-22 21:09 ` [PATCH v2 2/7] dt-bindings: pci/qcom,pcie: resets are not defined for msm8996 Dmitry Baryshkov
2022-04-23 17:42   ` Krzysztof Kozlowski
2022-04-22 21:09 ` [PATCH v2 3/7] dt-bindings: pci/qcom,pcie: add schema for sc7280 chipset Dmitry Baryshkov
2022-04-23 17:43   ` Krzysztof Kozlowski
2022-04-22 21:09 ` [PATCH v2 4/7] arm64: dts: qcom: stop using snps,dw-pcie falback Dmitry Baryshkov
2022-04-22 21:10 ` [PATCH v2 5/7] arm: " Dmitry Baryshkov
2022-04-22 21:10 ` Dmitry Baryshkov [this message]
2022-04-23 17:44   ` [PATCH v2 6/7] arm: dts: qcom-*: replace deprecated perst-gpio with perst-gpios Krzysztof Kozlowski
2022-04-22 21:10 ` [PATCH v2 7/7] arm64: dts: qcom: " Dmitry Baryshkov
2022-04-23 17:45   ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220422211002.2012070-7-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=svarbanov@mm-sol.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).