[PATCH v3 00/10] phy: qcom-qmp-combo: convert to newer style of bindings

[PATCH v3 00/10] phy: qcom-qmp-combo: convert to newer style of bindings

[Dmitry Baryshkov]

Reviewing several patchsets for newer platforms made me understand that
having two styles of QMP PHY bindings causes confusion. Despite binding
documents having notes telling that old bindings should be used for
older platforms, it is too easy to attempt adding new platform with
older QMP PHY binding. Thus let's have just a single documented style of
bindings.

Dependencies: [1]

[1] https://lore.kernel.org/linux-phy/20230521195420.12454-1-dmitry.baryshkov@linaro.org/

Changes since v2:
 - Rebased on top of phy/next and updated [1]

Changes since v1:
 - Split large patchset into smaller parts
 - Reworked sm8150 too (following changes in [1])
 - Unified bindings with the existing ones
   - use shared list of clocks,
   - added sc7180 as a first grade entry
   - dropped useless descriptions
   - removed ref_clk_src clock
   - dropped second example

Dmitry Baryshkov (10):
  dt-bindings: phy: migrate combo QMP PHY bindings to
    qcom,sc8280xp-qmp-usb43dp-phy.yaml
  phy: qcom-qmp-combo: simplify clock handling
  phy: qcom-qmp-combo: populate offsets for all combo PHYs
  phy: qcom-qmp-combo: add qcom,sc7280-qmp-usb3-dp-phy compat entry
  arm64: dts: qcom: sc7180: switch USB+DP QMP PHY to new style of
    bindings
  arm64: dts: qcom: sc7280: link usb3_phy_wrapper_gcc_usb30_pipe_clk
  arm64: dts: qcom: sc7280: switch USB+DP QMP PHY to new style of
    bindings
  arm64: dts: qcom: sdm845: switch USB+DP QMP PHY to new style of
    bindings
  arm64: dts: qcom: sm8150: switch USB+DP QMP PHY to new style of
    bindings
  arm64: dts: qcom: sm8250: switch USB+DP QMP PHY to new style of
    bindings

 .../phy/qcom,sc7180-qmp-usb3-dp-phy.yaml      | 278 ------------------
 .../phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml    |  46 ++-
 arch/arm64/boot/dts/qcom/sc7180.dtsi          |  57 ++--
 arch/arm64/boot/dts/qcom/sc7280.dtsi          |  60 ++--
 arch/arm64/boot/dts/qcom/sdm845.dtsi          |  57 ++--
 arch/arm64/boot/dts/qcom/sm8150.dtsi          |  48 +--
 arch/arm64/boot/dts/qcom/sm8250.dtsi          |  49 +--
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c     |  79 +++--
 8 files changed, 165 insertions(+), 509 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml

-- 
2.39.2

[PATCH v3 01/10] dt-bindings: phy: migrate combo QMP PHY bindings to qcom,sc8280xp-qmp-usb43dp-phy.yaml

[Dmitry Baryshkov]

Migrate legacy bindings (described in qcom,sc7180-qmp-usb3-dp-phy.yaml)
to qcom,sc8280xp-qmp-usb43dp-phy.yaml. This removes a need to declare
the child PHY node or split resource regions.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../phy/qcom,sc7180-qmp-usb3-dp-phy.yaml      | 278 ------------------
 .../phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml    |  46 ++-
 2 files changed, 44 insertions(+), 280 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
deleted file mode 100644
index a2ddf718ba76..000000000000
--- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
+++ /dev/null
@@ -1,278 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm QMP USB3 DP PHY controller (SC7180)
-
-description:
-  The QMP PHY controller supports physical layer functionality for a number of
-  controllers on Qualcomm chipsets, such as, PCIe, UFS and USB.
-
-  Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
-  qcom,sc8280xp-qmp-usb43dp-phy.yaml.
-
-maintainers:
-  - Wesley Cheng <quic_wcheng@quicinc.com>
-
-properties:
-  compatible:
-    oneOf:
-      - enum:
-          - qcom,sc7180-qmp-usb3-dp-phy
-          - qcom,sc8180x-qmp-usb3-dp-phy
-          - qcom,sdm845-qmp-usb3-dp-phy
-          - qcom,sm8150-qmp-usb3-dp-phy
-          - qcom,sm8250-qmp-usb3-dp-phy
-      - items:
-          - enum:
-              - qcom,sc7280-qmp-usb3-dp-phy
-          - const: qcom,sm8250-qmp-usb3-dp-phy
-
-  reg:
-    items:
-      - description: Address and length of PHY's USB serdes block.
-      - description: Address and length of the DP_COM control block.
-      - description: Address and length of PHY's DP serdes block.
-
-  reg-names:
-    items:
-      - const: usb
-      - const: dp_com
-      - const: dp
-
-  "#address-cells":
-    enum: [ 1, 2 ]
-
-  "#size-cells":
-    enum: [ 1, 2 ]
-
-  ranges: true
-
-  clocks:
-    minItems: 3
-    maxItems: 4
-
-  clock-names:
-    minItems: 3
-    maxItems: 4
-
-  power-domains:
-    maxItems: 1
-
-  resets:
-    items:
-      - description: reset of phy block.
-      - description: phy common block reset.
-
-  reset-names:
-    items:
-      - const: phy
-      - const: common
-
-  vdda-phy-supply:
-    description:
-      Phandle to a regulator supply to PHY core block.
-
-  vdda-pll-supply:
-    description:
-      Phandle to 1.8V regulator supply to PHY refclk pll block.
-
-  vddp-ref-clk-supply:
-    description:
-      Phandle to a regulator supply to any specific refclk pll block.
-
-# Required nodes:
-patternProperties:
-  "^usb3-phy@[0-9a-f]+$":
-    type: object
-    additionalProperties: false
-    description:
-      The USB3 PHY.
-
-    properties:
-      reg:
-        items:
-          - description: Address and length of TX.
-          - description: Address and length of RX.
-          - description: Address and length of PCS.
-          - description: Address and length of TX2.
-          - description: Address and length of RX2.
-          - description: Address and length of pcs_misc.
-
-      clocks:
-        items:
-          - description: pipe clock
-
-      clock-names:
-        deprecated: true
-        items:
-          - const: pipe0
-
-      clock-output-names:
-        items:
-          - const: usb3_phy_pipe_clk_src
-
-      '#clock-cells':
-        const: 0
-
-      '#phy-cells':
-        const: 0
-
-    required:
-      - reg
-      - clocks
-      - '#clock-cells'
-      - '#phy-cells'
-
-  "^dp-phy@[0-9a-f]+$":
-    type: object
-    additionalProperties: false
-    description:
-      The DP PHY.
-
-    properties:
-      reg:
-        items:
-          - description: Address and length of TX.
-          - description: Address and length of RX.
-          - description: Address and length of PCS.
-          - description: Address and length of TX2.
-          - description: Address and length of RX2.
-
-      '#clock-cells':
-        const: 1
-
-      '#phy-cells':
-        const: 0
-
-    required:
-      - reg
-      - '#clock-cells'
-      - '#phy-cells'
-
-required:
-  - compatible
-  - reg
-  - "#address-cells"
-  - "#size-cells"
-  - ranges
-  - clocks
-  - clock-names
-  - resets
-  - reset-names
-  - vdda-phy-supply
-  - vdda-pll-supply
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          enum:
-            - qcom,sc7180-qmp-usb3-dp-phy
-            - qcom,sdm845-qmp-usb3-dp-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Phy aux clock
-            - description: Phy config clock
-            - description: 19.2 MHz ref clk
-            - description: Phy common block aux clock
-        clock-names:
-          items:
-            - const: aux
-            - const: cfg_ahb
-            - const: ref
-            - const: com_aux
-
-  - if:
-      properties:
-        compatible:
-          enum:
-            - qcom,sc8180x-qmp-usb3-dp-phy
-            - qcom,sm8150-qmp-usb3-dp-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Phy aux clock
-            - description: 19.2 MHz ref clk
-            - description: Phy common block aux clock
-        clock-names:
-          items:
-            - const: aux
-            - const: ref
-            - const: com_aux
-
-  - if:
-      properties:
-        compatible:
-          enum:
-            - qcom,sm8250-qmp-usb3-dp-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Phy aux clock
-            - description: Board XO source
-            - description: Phy common block aux clock
-        clock-names:
-          items:
-            - const: aux
-            - const: ref_clk_src
-            - const: com_aux
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
-    usb_1_qmpphy: phy-wrapper@88e9000 {
-        compatible = "qcom,sdm845-qmp-usb3-dp-phy";
-        reg = <0x088e9000 0x18c>,
-              <0x088e8000 0x10>,
-              <0x088ea000 0x40>;
-        reg-names = "usb", "dp_com", "dp";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0x0 0x088e9000 0x2000>;
-
-        clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-                 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-                 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-        clock-names = "aux", "cfg_ahb", "ref", "com_aux";
-
-        resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
-                 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
-        reset-names = "phy", "common";
-
-        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
-        vdda-pll-supply = <&vdda_usb2_ss_core>;
-
-        usb3-phy@200 {
-            reg = <0x200 0x128>,
-                  <0x400 0x200>,
-                  <0xc00 0x218>,
-                  <0x600 0x128>,
-                  <0x800 0x200>,
-                  <0xa00 0x100>;
-            #clock-cells = <0>;
-            #phy-cells = <0>;
-            clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-            clock-output-names = "usb3_phy_pipe_clk_src";
-        };
-
-        dp-phy@88ea200 {
-            reg = <0xa200 0x200>,
-                  <0xa400 0x200>,
-                  <0xaa00 0x200>,
-                  <0xa600 0x200>,
-                  <0xa800 0x200>;
-            #clock-cells = <1>;
-            #phy-cells = <0>;
-        };
-    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
index ef1c02d8ac88..9af203dc8793 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
@@ -16,8 +16,14 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,sc7180-qmp-usb3-dp-phy
+      - qcom,sc7280-qmp-usb3-dp-phy
+      - qcom,sc8180x-qmp-usb3-dp-phy
       - qcom,sc8280xp-qmp-usb43dp-phy
+      - qcom,sdm845-qmp-usb3-dp-phy
       - qcom,sm6350-qmp-usb3-dp-phy
+      - qcom,sm8150-qmp-usb3-dp-phy
+      - qcom,sm8250-qmp-usb3-dp-phy
       - qcom,sm8350-qmp-usb3-dp-phy
       - qcom,sm8450-qmp-usb3-dp-phy
       - qcom,sm8550-qmp-usb3-dp-phy
@@ -26,14 +32,17 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 4
+    minItems: 4
+    maxItems: 5
 
   clock-names:
+    minItems: 4
     items:
       - const: aux
       - const: ref
       - const: com_aux
       - const: usb3_pipe
+      - const: cfg_ahb
 
   power-domains:
     maxItems: 1
@@ -85,7 +94,6 @@ required:
   - reg
   - clocks
   - clock-names
-  - power-domains
   - resets
   - reset-names
   - vdda-phy-supply
@@ -93,6 +101,40 @@ required:
   - "#clock-cells"
   - "#phy-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7180-qmp-usb3-dp-phy
+            - qcom,sdm845-qmp-usb3-dp-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+        clock-names:
+          maxItems: 5
+    else:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc8280xp-qmp-usb43dp-phy
+            - qcom,sm6350-qmp-usb3-dp-phy
+            - qcom,sm8550-qmp-usb3-dp-phy
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+
 additionalProperties: false
 
 examples:
-- 
2.39.2

[PATCH v3 02/10] phy: qcom-qmp-combo: simplify clock handling

[Dmitry Baryshkov]

For new binding we are going to drop ref_clk_src clock and always use
ref clock. Rather than introducing additional code to handle legacy vs
current bindings (and clock names), use devm_clk_bulk_get_optional()
when new bindings are used and devm_clk_bulk_get_all() when legacy
bindings are in place.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 67 ++++++++---------------
 1 file changed, 23 insertions(+), 44 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 2bff1bbb8610..b04392be2e3f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1271,9 +1271,6 @@ struct qmp_phy_cfg {
 	int (*calibrate_dp_phy)(struct qmp_combo *qmp);
 	void (*dp_aux_init)(struct qmp_combo *qmp);
 
-	/* clock ids to be requested */
-	const char * const *clk_list;
-	int num_clks;
 	/* resets to be requested */
 	const char * const *reset_list;
 	int num_resets;
@@ -1315,6 +1312,7 @@ struct qmp_combo {
 
 	struct clk *pipe_clk;
 	struct clk_bulk_data *clks;
+	int num_clks;
 	struct reset_control_bulk_data *resets;
 	struct regulator_bulk_data *vregs;
 
@@ -1380,19 +1378,10 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 }
 
 /* list of clocks required by phy */
-static const char * const qmp_v3_phy_clk_l[] = {
+static const char * const qmp_combo_phy_clk_l[] = {
 	"aux", "cfg_ahb", "ref", "com_aux",
 };
 
-static const char * const qmp_v4_phy_clk_l[] = {
-	"aux", "ref", "com_aux",
-};
-
-/* the primary usb3 phy on sm8250 doesn't have a ref clock */
-static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
-	"aux", "ref_clk_src", "com_aux"
-};
-
 /* list of resets */
 static const char * const msm8996_usb3phy_reset_l[] = {
 	"phy", "common",
@@ -1466,8 +1455,6 @@ static const struct qmp_phy_cfg sc7180_usb3dpphy_cfg = {
 	.configure_dp_phy	= qmp_v3_configure_dp_phy,
 	.calibrate_dp_phy	= qmp_v3_calibrate_dp_phy,
 
-	.clk_list		= qmp_v3_phy_clk_l,
-	.num_clks		= ARRAY_SIZE(qmp_v3_phy_clk_l),
 	.reset_list		= sc7180_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(sc7180_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
@@ -1511,8 +1498,6 @@ static const struct qmp_phy_cfg sdm845_usb3dpphy_cfg = {
 	.configure_dp_phy	= qmp_v3_configure_dp_phy,
 	.calibrate_dp_phy	= qmp_v3_calibrate_dp_phy,
 
-	.clk_list		= qmp_v3_phy_clk_l,
-	.num_clks		= ARRAY_SIZE(qmp_v3_phy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
@@ -1558,8 +1543,6 @@ static const struct qmp_phy_cfg sc8180x_usb3dpphy_cfg = {
 	.configure_dp_phy	= qmp_v4_configure_dp_phy,
 	.calibrate_dp_phy	= qmp_v4_calibrate_dp_phy,
 
-	.clk_list		= qmp_v4_phy_clk_l,
-	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
@@ -1606,8 +1589,6 @@ static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = {
 	.configure_dp_phy	= qmp_v5_configure_dp_phy,
 	.calibrate_dp_phy	= qmp_v4_calibrate_dp_phy,
 
-	.clk_list		= qmp_v4_phy_clk_l,
-	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
@@ -1651,8 +1632,6 @@ static const struct qmp_phy_cfg sm6350_usb3dpphy_cfg = {
 	.configure_dp_phy	= qmp_v3_configure_dp_phy,
 	.calibrate_dp_phy	= qmp_v3_calibrate_dp_phy,
 
-	.clk_list		= qmp_v4_phy_clk_l,
-	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
@@ -1696,8 +1675,6 @@ static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = {
 	.configure_dp_phy	= qmp_v4_configure_dp_phy,
 	.calibrate_dp_phy	= qmp_v4_calibrate_dp_phy,
 
-	.clk_list		= qmp_v4_sm8250_usbphy_clk_l,
-	.num_clks		= ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
@@ -1746,8 +1723,6 @@ static const struct qmp_phy_cfg sm8350_usb3dpphy_cfg = {
 	.configure_dp_phy	= qmp_v4_configure_dp_phy,
 	.calibrate_dp_phy	= qmp_v4_calibrate_dp_phy,
 
-	.clk_list		= qmp_v4_phy_clk_l,
-	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
@@ -1796,8 +1771,6 @@ static const struct qmp_phy_cfg sm8550_usb3dpphy_cfg = {
 	.calibrate_dp_phy	= qmp_v4_calibrate_dp_phy,
 
 	.regs			= qmp_v4_usb3phy_regs_layout,
-	.clk_list		= qmp_v4_phy_clk_l,
-	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
@@ -2503,7 +2476,7 @@ static int qmp_combo_com_init(struct qmp_combo *qmp, bool force)
 		goto err_disable_regulators;
 	}
 
-	ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+	ret = clk_bulk_prepare_enable(qmp->num_clks, qmp->clks);
 	if (ret)
 		goto err_assert_reset;
 
@@ -2553,7 +2526,7 @@ static int qmp_combo_com_exit(struct qmp_combo *qmp, bool force)
 
 	reset_control_bulk_assert(cfg->num_resets, qmp->resets);
 
-	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+	clk_bulk_disable_unprepare(qmp->num_clks, qmp->clks);
 
 	regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
 
@@ -2832,7 +2805,6 @@ static void qmp_combo_disable_autonomous_mode(struct qmp_combo *qmp)
 static int __maybe_unused qmp_combo_runtime_suspend(struct device *dev)
 {
 	struct qmp_combo *qmp = dev_get_drvdata(dev);
-	const struct qmp_phy_cfg *cfg = qmp->cfg;
 
 	dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qmp->mode);
 
@@ -2844,7 +2816,7 @@ static int __maybe_unused qmp_combo_runtime_suspend(struct device *dev)
 	qmp_combo_enable_autonomous_mode(qmp);
 
 	clk_disable_unprepare(qmp->pipe_clk);
-	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+	clk_bulk_disable_unprepare(qmp->num_clks, qmp->clks);
 
 	return 0;
 }
@@ -2852,7 +2824,6 @@ static int __maybe_unused qmp_combo_runtime_suspend(struct device *dev)
 static int __maybe_unused qmp_combo_runtime_resume(struct device *dev)
 {
 	struct qmp_combo *qmp = dev_get_drvdata(dev);
-	const struct qmp_phy_cfg *cfg = qmp->cfg;
 	int ret = 0;
 
 	dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qmp->mode);
@@ -2862,14 +2833,14 @@ static int __maybe_unused qmp_combo_runtime_resume(struct device *dev)
 		return 0;
 	}
 
-	ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
+	ret = clk_bulk_prepare_enable(qmp->num_clks, qmp->clks);
 	if (ret)
 		return ret;
 
 	ret = clk_prepare_enable(qmp->pipe_clk);
 	if (ret) {
 		dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
-		clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
+		clk_bulk_disable_unprepare(qmp->num_clks, qmp->clks);
 		return ret;
 	}
 
@@ -2940,9 +2911,8 @@ static int qmp_combo_reset_init(struct qmp_combo *qmp)
 
 static int qmp_combo_clk_init(struct qmp_combo *qmp)
 {
-	const struct qmp_phy_cfg *cfg = qmp->cfg;
 	struct device *dev = qmp->dev;
-	int num = cfg->num_clks;
+	int num = ARRAY_SIZE(qmp_combo_phy_clk_l);
 	int i;
 
 	qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
@@ -2950,9 +2920,11 @@ static int qmp_combo_clk_init(struct qmp_combo *qmp)
 		return -ENOMEM;
 
 	for (i = 0; i < num; i++)
-		qmp->clks[i].id = cfg->clk_list[i];
+		qmp->clks[i].id = qmp_combo_phy_clk_l[i];
 
-	return devm_clk_bulk_get(dev, num, qmp->clks);
+	qmp->num_clks = num;
+
+	return devm_clk_bulk_get_optional(dev, num, qmp->clks);
 }
 
 static void phy_clk_release_provider(void *res)
@@ -3158,6 +3130,12 @@ static int phy_dp_clks_register(struct qmp_combo *qmp, struct device_node *np)
 	if (ret)
 		return ret;
 
+	ret = devm_clk_bulk_get_all(qmp->dev, &qmp->clks);
+	if (ret < 0)
+		return ret;
+
+	qmp->num_clks = ret;
+
 	return 0;
 }
 
@@ -3427,6 +3405,7 @@ static int qmp_combo_parse_dt(struct qmp_combo *qmp)
 	const struct qmp_combo_offsets *offs = cfg->offsets;
 	struct device *dev = qmp->dev;
 	void __iomem *base;
+	int ret;
 
 	if (!offs)
 		return -EINVAL;
@@ -3456,6 +3435,10 @@ static int qmp_combo_parse_dt(struct qmp_combo *qmp)
 	}
 	qmp->dp_dp_phy = base + offs->dp_dp_phy;
 
+	ret = qmp_combo_clk_init(qmp);
+	if (ret)
+		return ret;
+
 	qmp->pipe_clk = devm_clk_get(dev, "usb3_pipe");
 	if (IS_ERR(qmp->pipe_clk)) {
 		return dev_err_probe(dev, PTR_ERR(qmp->pipe_clk),
@@ -3504,10 +3487,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
 
 	mutex_init(&qmp->phy_mutex);
 
-	ret = qmp_combo_clk_init(qmp);
-	if (ret)
-		return ret;
-
 	ret = qmp_combo_reset_init(qmp);
 	if (ret)
 		return ret;
-- 
2.39.2

[PATCH v3 03/10] phy: qcom-qmp-combo: populate offsets for all combo PHYs

[Dmitry Baryshkov]

In order to support newer style bindings for combo PHYs, populate
offsets for all Combo QMP PHY configurations.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index b04392be2e3f..8dd635d02982 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1422,6 +1422,8 @@ static const struct qmp_combo_offsets qmp_combo_offsets_v5 = {
 };
 
 static const struct qmp_phy_cfg sc7180_usb3dpphy_cfg = {
+	.offsets		= &qmp_combo_offsets_v3,
+
 	.serdes_tbl		= qmp_v3_usb3_serdes_tbl,
 	.serdes_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
 	.tx_tbl			= qmp_v3_usb3_tx_tbl,
@@ -1465,6 +1467,8 @@ static const struct qmp_phy_cfg sc7180_usb3dpphy_cfg = {
 };
 
 static const struct qmp_phy_cfg sdm845_usb3dpphy_cfg = {
+	.offsets		= &qmp_combo_offsets_v3,
+
 	.serdes_tbl		= qmp_v3_usb3_serdes_tbl,
 	.serdes_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
 	.tx_tbl			= qmp_v3_usb3_tx_tbl,
@@ -1508,6 +1512,8 @@ static const struct qmp_phy_cfg sdm845_usb3dpphy_cfg = {
 };
 
 static const struct qmp_phy_cfg sc8180x_usb3dpphy_cfg = {
+	.offsets		= &qmp_combo_offsets_v3,
+
 	.serdes_tbl		= sm8150_usb3_serdes_tbl,
 	.serdes_tbl_num		= ARRAY_SIZE(sm8150_usb3_serdes_tbl),
 	.tx_tbl			= sm8150_usb3_tx_tbl,
@@ -1640,6 +1646,8 @@ static const struct qmp_phy_cfg sm6350_usb3dpphy_cfg = {
 };
 
 static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = {
+	.offsets		= &qmp_combo_offsets_v3,
+
 	.serdes_tbl		= sm8150_usb3_serdes_tbl,
 	.serdes_tbl_num		= ARRAY_SIZE(sm8150_usb3_serdes_tbl),
 	.tx_tbl			= sm8250_usb3_tx_tbl,
-- 
2.39.2

[PATCH v3 04/10] phy: qcom-qmp-combo: add qcom,sc7280-qmp-usb3-dp-phy compat entry

[Dmitry Baryshkov]

Add separate device entry for Combo USB+DP QMP PHY on sc7280 platform.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 8dd635d02982..c81b46403622 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -3585,6 +3585,10 @@ static const struct of_device_id qmp_combo_of_match_table[] = {
 		.compatible = "qcom,sc7180-qmp-usb3-dp-phy",
 		.data = &sc7180_usb3dpphy_cfg,
 	},
+	{
+		.compatible = "qcom,sc7280-qmp-usb3-dp-phy",
+		.data = &sm8250_usb3dpphy_cfg,
+	},
 	{
 		.compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
 		.data = &sc8180x_usb3dpphy_cfg,
-- 
2.39.2

[PATCH v3 05/10] arm64: dts: qcom: sc7180: switch USB+DP QMP PHY to new style of bindings

[Dmitry Baryshkov]

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 57 ++++++++++------------------
 1 file changed, 19 insertions(+), 38 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index ea1ffade1aa1..b07a49e6829a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc7180.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
@@ -2718,49 +2719,28 @@ usb_1_hsphy: phy@88e3000 {
 			nvmem-cells = <&qusb2p_hstx_trim>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x3c>,
-			      <0 0x088ea000 0 0x18c>;
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe",
+				      "cfg_ahb";
 
 			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x128>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x128>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x18>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		dc_noc: interconnect@9160000 {
@@ -2840,7 +2820,7 @@ usb_1_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0x540 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
 			};
@@ -3148,8 +3128,9 @@ mdss_dp: displayport-controller@ae90000 {
 					      "ctrl_link_iface", "stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
-				phys = <&dp_phy>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
@@ -3206,8 +3187,8 @@ dispcc: clock-controller@af00000 {
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&dsi_phy 0>,
 				 <&dsi_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "dsi0_phy_pll_out_byteclk",
-- 
2.39.2

[PATCH v3 06/10] arm64: dts: qcom: sc7280: link usb3_phy_wrapper_gcc_usb30_pipe_clk

[Dmitry Baryshkov]

Use usb_1_ssphy's clock as gcc's usb3_phy_wrapper_gcc_usb30_pipe_clk
clock source.

Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Fixes: 1c39e6f9b534 ("arm64: dts: qcom: sc7280: Add USB related nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 31728f461422..5f8a94dd74d2 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -848,7 +848,8 @@ gcc: clock-controller@100000 {
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
 				 <0>, <&pcie1_lane>,
-				 <0>, <0>, <0>, <0>;
+				 <0>, <0>, <0>,
+				 <&usb_1_ssphy>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
 				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
 				      "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk",
-- 
2.39.2

[PATCH v3 07/10] arm64: dts: qcom: sc7280: switch USB+DP QMP PHY to new style of bindings

[Dmitry Baryshkov]

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 59 +++++++++-------------------
 1 file changed, 19 insertions(+), 40 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 5f8a94dd74d2..0ebc34f93efb 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -18,6 +18,7 @@
 #include <dt-bindings/interconnect/qcom,sc7280.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
@@ -849,7 +850,7 @@ gcc: clock-controller@100000 {
 				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
 				 <0>, <&pcie1_lane>,
 				 <0>, <0>, <0>,
-				 <&usb_1_ssphy>;
+				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
 				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
 				      "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk",
@@ -3326,49 +3327,26 @@ usb_2_hsphy: phy@88e4000 {
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
-			compatible = "qcom,sc7280-qmp-usb3-dp-phy",
-				     "qcom,sm8250-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x40>,
-			      <0 0x088ea000 0 0x200>;
+		usb_1_qmpphy: phy@88e8000 {
+			compatible = "qcom,sc7280-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <1>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		usb_2: usb@8cf8800 {
@@ -3693,7 +3671,7 @@ usb_1_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0xe0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
 			};
@@ -3798,8 +3776,8 @@ dispcc: clock-controller@af00000 {
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&mdss_dsi_phy 0>,
 				 <&mdss_dsi_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&mdss_edp_phy 0>,
 				 <&mdss_edp_phy 1>;
 			clock-names = "bi_tcxo",
@@ -4137,8 +4115,9 @@ mdss_dp: displayport-controller@ae90000 {
 						"stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
-				phys = <&dp_phy>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
-- 
2.39.2

[PATCH v3 08/10] arm64: dts: qcom: sdm845: switch USB+DP QMP PHY to new style of bindings

[Dmitry Baryshkov]

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 57 ++++++++++------------------
 1 file changed, 19 insertions(+), 38 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 90424442bb4a..6aa2f8f3affc 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -18,6 +18,7 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sdm845.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
@@ -3969,49 +3970,28 @@ usb_2_hsphy: phy@88e3000 {
 			nvmem-cells = <&qusb2s_hstx_trim>;
 		};
 
-		usb_1_qmpphy: phy@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sdm845-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x38>,
-			      <0 0x088ea000 0 0x40>;
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe",
+				      "cfg_ahb";
 
 			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x128>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x128>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
@@ -4091,7 +4071,7 @@ usb_1_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0x740 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -4559,8 +4539,9 @@ mdss_dp: displayport-controller@ae90000 {
 					      "ctrl_link_iface", "stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
-				phys = <&dp_phy>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
@@ -4898,8 +4879,8 @@ dispcc: clock-controller@af00000 {
 				 <&dsi0_phy 1>,
 				 <&dsi1_phy 0>,
 				 <&dsi1_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "gcc_disp_gpll0_div_clk_src",
-- 
2.39.2

[PATCH v3 09/10] arm64: dts: qcom: sm8150: switch USB+DP QMP PHY to new style of bindings

[Dmitry Baryshkov]

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 48 ++++++++--------------------
 1 file changed, 14 insertions(+), 34 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 1f442e1be63a..e2e210e10475 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -6,6 +6,7 @@
 
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -3398,47 +3399,26 @@ usb_2_hsphy: phy@88e3000 {
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
-		usb_1_qmpphy: phy@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sm8150-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x38>,
-			      <0 0x088ea000 0 0x40>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088e8000 0 0x3000>;
+
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 
-			usb_1_dpphy: phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			status = "disabled";
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
@@ -3575,7 +3555,7 @@ usb_1_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0x140 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
-- 
2.39.2

[PATCH v3 10/10] arm64: dts: qcom: sm8250: switch USB+DP QMP PHY to new style of bindings

[Dmitry Baryshkov]

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 49 ++++++++--------------------
 1 file changed, 14 insertions(+), 35 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 7bea916900e2..a260e4a7305b 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sm8250.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -3539,48 +3540,26 @@ usb_2_hsphy: phy@88e4000 {
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
-		usb_1_qmpphy: phy@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sm8250-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x40>,
-			      <0 0x088ea000 0 0x200>;
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <1>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
@@ -3725,7 +3704,7 @@ usb_1_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0x0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -4415,8 +4394,8 @@ dispcc: clock-controller@af00000 {
 				 <&dsi0_phy 1>,
 				 <&dsi1_phy 0>,
 				 <&dsi1_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "dsi0_phy_pll_out_byteclk",
 				      "dsi0_phy_pll_out_dsiclk",
-- 
2.39.2

Re: [PATCH v3 05/10] arm64: dts: qcom: sc7180: switch USB+DP QMP PHY to new style of bindings

[Konrad Dybcio]

On 21.05.2023 22:23, Dmitry Baryshkov wrote:
> Change the USB QMP PHY to use newer style of QMP PHY bindings (single
> resource region, no per-PHY subnodes).
> 
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 57 ++++++++++------------------
>  1 file changed, 19 insertions(+), 38 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index ea1ffade1aa1..b07a49e6829a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -14,6 +14,7 @@
>  #include <dt-bindings/interconnect/qcom,osm-l3.h>
>  #include <dt-bindings/interconnect/qcom,sc7180.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/phy/phy-qcom-qmp.h>
>  #include <dt-bindings/phy/phy-qcom-qusb2.h>
>  #include <dt-bindings/power/qcom-rpmpd.h>
>  #include <dt-bindings/reset/qcom,sdm845-aoss.h>
> @@ -2718,49 +2719,28 @@ usb_1_hsphy: phy@88e3000 {
>  			nvmem-cells = <&qusb2p_hstx_trim>;
>  		};
>  
> -		usb_1_qmpphy: phy-wrapper@88e9000 {
> +		usb_1_qmpphy: phy@88e8000 {
>  			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
> -			reg = <0 0x088e9000 0 0x18c>,
> -			      <0 0x088e8000 0 0x3c>,
> -			      <0 0x088ea000 0 0x18c>;
> +			reg = <0 0x088e8000 0 0x3000>;
>  			status = "disabled";
> -			#address-cells = <2>;
> -			#size-cells = <2>;
> -			ranges;
>  
>  			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
> -				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
>  				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> -				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
> -			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
> +				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> +				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
> +				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
These are unaligned

Other than that:

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> +			clock-names = "aux",
> +				      "ref",
> +				      "com_aux",
> +				      "usb3_pipe",
> +				      "cfg_ahb";
>  
>  			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
>  				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
>  			reset-names = "phy", "common";
>  
> -			usb_1_ssphy: usb3-phy@88e9200 {
> -				reg = <0 0x088e9200 0 0x128>,
> -				      <0 0x088e9400 0 0x200>,
> -				      <0 0x088e9c00 0 0x218>,
> -				      <0 0x088e9600 0 0x128>,
> -				      <0 0x088e9800 0 0x200>,
> -				      <0 0x088e9a00 0 0x18>;
> -				#clock-cells = <0>;
> -				#phy-cells = <0>;
> -				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> -				clock-names = "pipe0";
> -				clock-output-names = "usb3_phy_pipe_clk_src";
> -			};
> -
> -			dp_phy: dp-phy@88ea200 {
> -				reg = <0 0x088ea200 0 0x200>,
> -				      <0 0x088ea400 0 0x200>,
> -				      <0 0x088eaa00 0 0x200>,
> -				      <0 0x088ea600 0 0x200>,
> -				      <0 0x088ea800 0 0x200>;
> -				#clock-cells = <1>;
> -				#phy-cells = <0>;
> -			};
> +			#clock-cells = <1>;
> +			#phy-cells = <1>;
>  		};
>  
>  		dc_noc: interconnect@9160000 {
> @@ -2840,7 +2820,7 @@ usb_1_dwc3: usb@a600000 {
>  				iommus = <&apps_smmu 0x540 0>;
>  				snps,dis_u2_susphy_quirk;
>  				snps,dis_enblslpm_quirk;
> -				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
> +				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
>  				phy-names = "usb2-phy", "usb3-phy";
>  				maximum-speed = "super-speed";
>  			};
> @@ -3148,8 +3128,9 @@ mdss_dp: displayport-controller@ae90000 {
>  					      "ctrl_link_iface", "stream_pixel";
>  				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
>  						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
> -				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
> -				phys = <&dp_phy>;
> +				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
> +							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
> +				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
>  				phy-names = "dp";
>  
>  				operating-points-v2 = <&dp_opp_table>;
> @@ -3206,8 +3187,8 @@ dispcc: clock-controller@af00000 {
>  				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
>  				 <&dsi_phy 0>,
>  				 <&dsi_phy 1>,
> -				 <&dp_phy 0>,
> -				 <&dp_phy 1>;
> +				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
> +				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
>  			clock-names = "bi_tcxo",
>  				      "gcc_disp_gpll0_clk_src",
>  				      "dsi0_phy_pll_out_byteclk",

Re: [PATCH v3 01/10] dt-bindings: phy: migrate combo QMP PHY bindings to qcom,sc8280xp-qmp-usb43dp-phy.yaml

[Vinod Koul]

On 21-05-23, 23:23, Dmitry Baryshkov wrote:
> Migrate legacy bindings (described in qcom,sc7180-qmp-usb3-dp-phy.yaml)
> to qcom,sc8280xp-qmp-usb43dp-phy.yaml. This removes a need to declare
> the child PHY node or split resource regions.

Dmitry, this fails to apply for me. Can you rebase please

-- 
~Vinod

Re: [PATCH v3 05/10] arm64: dts: qcom: sc7180: switch USB+DP QMP PHY to new style of bindings

[Dmitry Baryshkov]

On 23/05/2023 11:41, Konrad Dybcio wrote:
> 
> 
> On 21.05.2023 22:23, Dmitry Baryshkov wrote:
>> Change the USB QMP PHY to use newer style of QMP PHY bindings (single
>> resource region, no per-PHY subnodes).
>>
>> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>> ---
>>   arch/arm64/boot/dts/qcom/sc7180.dtsi | 57 ++++++++++------------------
>>   1 file changed, 19 insertions(+), 38 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> index ea1ffade1aa1..b07a49e6829a 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> @@ -14,6 +14,7 @@
>>   #include <dt-bindings/interconnect/qcom,osm-l3.h>
>>   #include <dt-bindings/interconnect/qcom,sc7180.h>
>>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/phy/phy-qcom-qmp.h>
>>   #include <dt-bindings/phy/phy-qcom-qusb2.h>
>>   #include <dt-bindings/power/qcom-rpmpd.h>
>>   #include <dt-bindings/reset/qcom,sdm845-aoss.h>
>> @@ -2718,49 +2719,28 @@ usb_1_hsphy: phy@88e3000 {
>>   			nvmem-cells = <&qusb2p_hstx_trim>;
>>   		};
>>   
>> -		usb_1_qmpphy: phy-wrapper@88e9000 {
>> +		usb_1_qmpphy: phy@88e8000 {
>>   			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
>> -			reg = <0 0x088e9000 0 0x18c>,
>> -			      <0 0x088e8000 0 0x3c>,
>> -			      <0 0x088ea000 0 0x18c>;
>> +			reg = <0 0x088e8000 0 0x3000>;
>>   			status = "disabled";
>> -			#address-cells = <2>;
>> -			#size-cells = <2>;
>> -			ranges;
>>   
>>   			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
>> -				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
>>   				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
>> -				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
>> -			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
>> +				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
>> +				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
>> +				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
> These are unaligned
> 
> Other than that:
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Ugh. It seems I missed this comment (and your r-b tag) when sending v4. 
Please excuse me. I'll send v5 in a few days to reduce the simultaneous 
spam.

> 
> Konrad
>> +			clock-names = "aux",
>> +				      "ref",
>> +				      "com_aux",
>> +				      "usb3_pipe",
>> +				      "cfg_ahb";
>>   
>>   			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
>>   				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
>>   			reset-names = "phy", "common";
>>   
>> -			usb_1_ssphy: usb3-phy@88e9200 {
>> -				reg = <0 0x088e9200 0 0x128>,
>> -				      <0 0x088e9400 0 0x200>,
>> -				      <0 0x088e9c00 0 0x218>,
>> -				      <0 0x088e9600 0 0x128>,
>> -				      <0 0x088e9800 0 0x200>,
>> -				      <0 0x088e9a00 0 0x18>;
>> -				#clock-cells = <0>;
>> -				#phy-cells = <0>;
>> -				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
>> -				clock-names = "pipe0";
>> -				clock-output-names = "usb3_phy_pipe_clk_src";
>> -			};
>> -
>> -			dp_phy: dp-phy@88ea200 {
>> -				reg = <0 0x088ea200 0 0x200>,
>> -				      <0 0x088ea400 0 0x200>,
>> -				      <0 0x088eaa00 0 0x200>,
>> -				      <0 0x088ea600 0 0x200>,
>> -				      <0 0x088ea800 0 0x200>;
>> -				#clock-cells = <1>;
>> -				#phy-cells = <0>;
>> -			};
>> +			#clock-cells = <1>;
>> +			#phy-cells = <1>;
>>   		};
>>   
>>   		dc_noc: interconnect@9160000 {
>> @@ -2840,7 +2820,7 @@ usb_1_dwc3: usb@a600000 {
>>   				iommus = <&apps_smmu 0x540 0>;
>>   				snps,dis_u2_susphy_quirk;
>>   				snps,dis_enblslpm_quirk;
>> -				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
>> +				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
>>   				phy-names = "usb2-phy", "usb3-phy";
>>   				maximum-speed = "super-speed";
>>   			};
>> @@ -3148,8 +3128,9 @@ mdss_dp: displayport-controller@ae90000 {
>>   					      "ctrl_link_iface", "stream_pixel";
>>   				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
>>   						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
>> -				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
>> -				phys = <&dp_phy>;
>> +				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
>> +							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
>> +				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
>>   				phy-names = "dp";
>>   
>>   				operating-points-v2 = <&dp_opp_table>;
>> @@ -3206,8 +3187,8 @@ dispcc: clock-controller@af00000 {
>>   				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
>>   				 <&dsi_phy 0>,
>>   				 <&dsi_phy 1>,
>> -				 <&dp_phy 0>,
>> -				 <&dp_phy 1>;
>> +				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
>> +				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
>>   			clock-names = "bi_tcxo",
>>   				      "gcc_disp_gpll0_clk_src",
>>   				      "dsi0_phy_pll_out_byteclk",

-- 
With best wishes
Dmitry