* [v1] drm/msm/disp/dpu1: add safe lut config in dpu driver
@ 2021-07-09 10:40 Kalyan Thota
2021-07-09 11:38 ` Dmitry Baryshkov
2021-07-12 3:41 ` Sai Prakash Ranjan
0 siblings, 2 replies; 3+ messages in thread
From: Kalyan Thota @ 2021-07-09 10:40 UTC (permalink / raw)
To: dri-devel, linux-arm-msm, freedreno, devicetree
Cc: Kalyan Thota, linux-kernel, robdclark, dianders, mkrishn,
saiprakash.ranjan, rnayak
Add safe lut configuration for all the targets in dpu
driver as per QOS recommendation.
Issue reported on SC7280:
With wait-for-safe feature in smmu enabled, RT client
buffer levels are checked to be safe before smmu invalidation.
Since display was always set to unsafe it was delaying the
invalidaiton process thus impacting the performance on NRT clients
such as eMMC and NVMe.
Validated this change on SC7280, With this change eMMC performance
has improved significantly.
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index d01c4c9..2e482cd 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -974,6 +974,7 @@ static const struct dpu_perf_cfg sdm845_perf_data = {
.amortizable_threshold = 25,
.min_prefill_lines = 24,
.danger_lut_tbl = {0xf, 0xffff, 0x0},
+ .safe_lut_tbl = {0xfff0, 0xf000, 0xffff},
.qos_lut_tbl = {
{.nentry = ARRAY_SIZE(sdm845_qos_linear),
.entries = sdm845_qos_linear
@@ -1001,6 +1002,7 @@ static const struct dpu_perf_cfg sc7180_perf_data = {
.min_dram_ib = 1600000,
.min_prefill_lines = 24,
.danger_lut_tbl = {0xff, 0xffff, 0x0},
+ .safe_lut_tbl = {0xfff0, 0xff00, 0xffff},
.qos_lut_tbl = {
{.nentry = ARRAY_SIZE(sc7180_qos_linear),
.entries = sc7180_qos_linear
@@ -1028,6 +1030,7 @@ static const struct dpu_perf_cfg sm8150_perf_data = {
.min_dram_ib = 800000,
.min_prefill_lines = 24,
.danger_lut_tbl = {0xf, 0xffff, 0x0},
+ .safe_lut_tbl = {0xfff8, 0xf000, 0xffff},
.qos_lut_tbl = {
{.nentry = ARRAY_SIZE(sm8150_qos_linear),
.entries = sm8150_qos_linear
@@ -1056,6 +1059,7 @@ static const struct dpu_perf_cfg sm8250_perf_data = {
.min_dram_ib = 800000,
.min_prefill_lines = 35,
.danger_lut_tbl = {0xf, 0xffff, 0x0},
+ .safe_lut_tbl = {0xfff0, 0xff00, 0xffff},
.qos_lut_tbl = {
{.nentry = ARRAY_SIZE(sc7180_qos_linear),
.entries = sc7180_qos_linear
@@ -1084,6 +1088,7 @@ static const struct dpu_perf_cfg sc7280_perf_data = {
.min_dram_ib = 1600000,
.min_prefill_lines = 24,
.danger_lut_tbl = {0xffff, 0xffff, 0x0},
+ .safe_lut_tbl = {0xff00, 0xff00, 0xffff},
.qos_lut_tbl = {
{.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
.entries = sc7180_qos_macrotile
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [v1] drm/msm/disp/dpu1: add safe lut config in dpu driver
2021-07-09 10:40 [v1] drm/msm/disp/dpu1: add safe lut config in dpu driver Kalyan Thota
@ 2021-07-09 11:38 ` Dmitry Baryshkov
2021-07-12 3:41 ` Sai Prakash Ranjan
1 sibling, 0 replies; 3+ messages in thread
From: Dmitry Baryshkov @ 2021-07-09 11:38 UTC (permalink / raw)
To: Kalyan Thota
Cc: open list:DRM DRIVER FOR MSM ADRENO GPU,
open list:DRM DRIVER FOR MSM ADRENO GPU, freedreno,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list, Rob Clark, Douglas Anderson, Krishna Manikandan,
Sai Prakash Ranjan, Rajendra Nayak
On Fri, 9 Jul 2021 at 13:41, Kalyan Thota <kalyan_t@codeaurora.org> wrote:
>
> Add safe lut configuration for all the targets in dpu
> driver as per QOS recommendation.
>
> Issue reported on SC7280:
>
> With wait-for-safe feature in smmu enabled, RT client
> buffer levels are checked to be safe before smmu invalidation.
> Since display was always set to unsafe it was delaying the
> invalidaiton process thus impacting the performance on NRT clients
> such as eMMC and NVMe.
>
> Validated this change on SC7280, With this change eMMC performance
> has improved significantly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
It might be a good option to push it to the stable tree also.
>
> Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index d01c4c9..2e482cd 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -974,6 +974,7 @@ static const struct dpu_perf_cfg sdm845_perf_data = {
> .amortizable_threshold = 25,
> .min_prefill_lines = 24,
> .danger_lut_tbl = {0xf, 0xffff, 0x0},
> + .safe_lut_tbl = {0xfff0, 0xf000, 0xffff},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sdm845_qos_linear),
> .entries = sdm845_qos_linear
> @@ -1001,6 +1002,7 @@ static const struct dpu_perf_cfg sc7180_perf_data = {
> .min_dram_ib = 1600000,
> .min_prefill_lines = 24,
> .danger_lut_tbl = {0xff, 0xffff, 0x0},
> + .safe_lut_tbl = {0xfff0, 0xff00, 0xffff},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sc7180_qos_linear),
> .entries = sc7180_qos_linear
> @@ -1028,6 +1030,7 @@ static const struct dpu_perf_cfg sm8150_perf_data = {
> .min_dram_ib = 800000,
> .min_prefill_lines = 24,
> .danger_lut_tbl = {0xf, 0xffff, 0x0},
> + .safe_lut_tbl = {0xfff8, 0xf000, 0xffff},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sm8150_qos_linear),
> .entries = sm8150_qos_linear
> @@ -1056,6 +1059,7 @@ static const struct dpu_perf_cfg sm8250_perf_data = {
> .min_dram_ib = 800000,
> .min_prefill_lines = 35,
> .danger_lut_tbl = {0xf, 0xffff, 0x0},
> + .safe_lut_tbl = {0xfff0, 0xff00, 0xffff},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sc7180_qos_linear),
> .entries = sc7180_qos_linear
> @@ -1084,6 +1088,7 @@ static const struct dpu_perf_cfg sc7280_perf_data = {
> .min_dram_ib = 1600000,
> .min_prefill_lines = 24,
> .danger_lut_tbl = {0xffff, 0xffff, 0x0},
> + .safe_lut_tbl = {0xff00, 0xff00, 0xffff},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
> .entries = sc7180_qos_macrotile
> --
> 2.7.4
>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [v1] drm/msm/disp/dpu1: add safe lut config in dpu driver
2021-07-09 10:40 [v1] drm/msm/disp/dpu1: add safe lut config in dpu driver Kalyan Thota
2021-07-09 11:38 ` Dmitry Baryshkov
@ 2021-07-12 3:41 ` Sai Prakash Ranjan
1 sibling, 0 replies; 3+ messages in thread
From: Sai Prakash Ranjan @ 2021-07-12 3:41 UTC (permalink / raw)
To: Kalyan Thota
Cc: dri-devel, linux-arm-msm, freedreno, devicetree, linux-kernel,
robdclark, dianders, mkrishn, rnayak
On 2021-07-09 16:10, Kalyan Thota wrote:
> Add safe lut configuration for all the targets in dpu
> driver as per QOS recommendation.
>
> Issue reported on SC7280:
>
> With wait-for-safe feature in smmu enabled, RT client
> buffer levels are checked to be safe before smmu invalidation.
> Since display was always set to unsafe it was delaying the
> invalidaiton process thus impacting the performance on NRT clients
> such as eMMC and NVMe.
>
> Validated this change on SC7280, With this change eMMC performance
> has improved significantly.
>
> Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index d01c4c9..2e482cd 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -974,6 +974,7 @@ static const struct dpu_perf_cfg sdm845_perf_data =
> {
> .amortizable_threshold = 25,
> .min_prefill_lines = 24,
> .danger_lut_tbl = {0xf, 0xffff, 0x0},
> + .safe_lut_tbl = {0xfff0, 0xf000, 0xffff},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sdm845_qos_linear),
> .entries = sdm845_qos_linear
> @@ -1001,6 +1002,7 @@ static const struct dpu_perf_cfg sc7180_perf_data
> = {
> .min_dram_ib = 1600000,
> .min_prefill_lines = 24,
> .danger_lut_tbl = {0xff, 0xffff, 0x0},
> + .safe_lut_tbl = {0xfff0, 0xff00, 0xffff},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sc7180_qos_linear),
> .entries = sc7180_qos_linear
> @@ -1028,6 +1030,7 @@ static const struct dpu_perf_cfg sm8150_perf_data
> = {
> .min_dram_ib = 800000,
> .min_prefill_lines = 24,
> .danger_lut_tbl = {0xf, 0xffff, 0x0},
> + .safe_lut_tbl = {0xfff8, 0xf000, 0xffff},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sm8150_qos_linear),
> .entries = sm8150_qos_linear
> @@ -1056,6 +1059,7 @@ static const struct dpu_perf_cfg sm8250_perf_data
> = {
> .min_dram_ib = 800000,
> .min_prefill_lines = 35,
> .danger_lut_tbl = {0xf, 0xffff, 0x0},
> + .safe_lut_tbl = {0xfff0, 0xff00, 0xffff},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sc7180_qos_linear),
> .entries = sc7180_qos_linear
> @@ -1084,6 +1088,7 @@ static const struct dpu_perf_cfg sc7280_perf_data
> = {
> .min_dram_ib = 1600000,
> .min_prefill_lines = 24,
> .danger_lut_tbl = {0xffff, 0xffff, 0x0},
> + .safe_lut_tbl = {0xff00, 0xff00, 0xffff},
> .qos_lut_tbl = {
> {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
> .entries = sc7180_qos_macrotile
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
(sc7280, sc7180)
This will need fixes and stable tag and I think this should also fix the
wait-for-safe issue with sdm845 (ufs/usb speed slowdown with display
active)
which we have in arm-smmu-qcom.
Thanks,
Sai
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
member
of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-07-12 3:41 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-09 10:40 [v1] drm/msm/disp/dpu1: add safe lut config in dpu driver Kalyan Thota
2021-07-09 11:38 ` Dmitry Baryshkov
2021-07-12 3:41 ` Sai Prakash Ranjan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).