linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Asutosh Das <quic_asutoshd@quicinc.com>
To: <quic_cang@quicinc.com>, <quic_nitirawa@quicinc.com>,
	<quic_rampraka@quicinc.com>, <quic_bhaskarv@quicinc.com>,
	<quic_richardp@quicinc.com>, <linux-scsi@vger.kernel.org>
Cc: Asutosh Das <quic_asutoshd@quicinc.com>,
	<linux-arm-msm@vger.kernel.org>, <quic_nguyenb@quicinc.com>,
	<quic_xiaosenh@quicinc.com>, <bvanassche@acm.org>,
	<avri.altman@wdc.com>, <mani@kernel.org>, <beanhuo@micron.com>
Subject: [PATCH v2 08/17] ufs: core: mcq: Allocate memory for mcq mode
Date: Wed, 5 Oct 2022 18:06:07 -0700	[thread overview]
Message-ID: <48b4a739e03056ad0e958ce65f7de5b79ce0ab02.1665017636.git.quic_asutoshd@quicinc.com> (raw)
In-Reply-To: <cover.1665017636.git.quic_asutoshd@quicinc.com>

To read the bqueuedepth, the device descriptor is fetched
in Single Doorbell Mode. This allocated memory may not be
enough for MCQ mode because the number of tags supported
in MCQ mode may be larger than in SDB mode.
Hence, release the memory allocated in SDB mode and allocate
memory for MCQ mode operation.
Define the ufs hardware queue and Completion Queue Entry.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
---
 drivers/ufs/core/ufs-mcq.c     | 58 ++++++++++++++++++++++++++++++++++++++++--
 drivers/ufs/core/ufshcd-priv.h |  1 +
 drivers/ufs/core/ufshcd.c      | 42 +++++++++++++++++++++++++++---
 include/ufs/ufshcd.h           | 19 ++++++++++++++
 include/ufs/ufshci.h           | 21 +++++++++++++++
 5 files changed, 136 insertions(+), 5 deletions(-)

diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c
index ff7d9a7e..19d6c6f1 100644
--- a/drivers/ufs/core/ufs-mcq.c
+++ b/drivers/ufs/core/ufs-mcq.c
@@ -232,15 +232,69 @@ static int ufshcd_mcq_config_nr_queues(struct ufs_hba *hba)
 	return 0;
 }
 
+int ufshcd_mcq_memory_alloc(struct ufs_hba *hba)
+{
+	struct ufs_hw_queue *hwq;
+	size_t utrdl_size, cqe_size;
+	int i;
+
+	for (i = 0; i < hba->nr_hw_queues; i++) {
+		hwq = &hba->uhq[i];
+
+		utrdl_size = sizeof(struct utp_transfer_req_desc) *
+			     hwq->max_entries;
+		hwq->sqe_base_addr = dmam_alloc_coherent(hba->dev, utrdl_size,
+							 &hwq->sqe_dma_addr,
+							 GFP_KERNEL);
+		if (!hwq->sqe_dma_addr) {
+			dev_err(hba->dev, "SQE allocation failed\n");
+			return -ENOMEM;
+		}
+
+		cqe_size = sizeof(struct cq_entry) * hwq->max_entries;
+		hwq->cqe_base_addr = dmam_alloc_coherent(hba->dev, cqe_size,
+							 &hwq->cqe_dma_addr,
+							 GFP_KERNEL);
+		if (!hwq->cqe_dma_addr) {
+			dev_err(hba->dev, "CQE allocation failed\n");
+			return -ENOMEM;
+		}
+	}
+
+	return 0;
+}
+
 int ufshcd_mcq_init(struct ufs_hba *hba)
 {
-	int ret;
+	int ret, i;
+	struct ufs_hw_queue *hwq;
 
 	ret = ufshcd_mcq_config_nr_queues(hba);
 	if (ret)
 		return ret;
 
 	ret = ufshcd_mcq_config_resource(hba);
-	return ret;
+	if (ret)
+		return ret;
+
+	hba->uhq = devm_kmalloc(hba->dev,
+				hba->nr_hw_queues * sizeof(struct ufs_hw_queue),
+				GFP_KERNEL);
+	if (!hba->uhq) {
+		dev_err(hba->dev, "ufs hw queue memory allocation failed\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < hba->nr_hw_queues; i++) {
+		hwq = &hba->uhq[i];
+		hwq->max_entries = hba->nutrs;
+	}
+
+	/* The very first HW queue is to serve device command */
+	hba->dev_cmd_queue = &hba->uhq[0];
+	/* Give dev_cmd_queue the minimal number of entries */
+	hba->dev_cmd_queue->max_entries = MAX_DEV_CMD_ENTRIES;
+
+	return 0;
 }
 
diff --git a/drivers/ufs/core/ufshcd-priv.h b/drivers/ufs/core/ufshcd-priv.h
index 6d16beb..f624682 100644
--- a/drivers/ufs/core/ufshcd-priv.h
+++ b/drivers/ufs/core/ufshcd-priv.h
@@ -52,6 +52,7 @@ int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode,
 void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit);
 int ufshcd_mcq_init(struct ufs_hba *hba);
 u32 ufshcd_mcq_decide_queue_depth(struct ufs_hba *hba);
+int ufshcd_mcq_memory_alloc(struct ufs_hba *hba);
 
 #define SD_ASCII_STD true
 #define SD_RAW false
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index b437986..80b6193 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -3686,6 +3686,12 @@ static int ufshcd_memory_alloc(struct ufs_hba *hba)
 	}
 
 	/*
+	 * Not freed if MCQ is configured see ufshcd_release_sdb_queue() and
+	 * ufshcd_config_mcq()
+	 */
+	if (hba->utmrdl_base_addr)
+		goto skip_utmrdl;
+	/*
 	 * Allocate memory for UTP Task Management descriptors
 	 * UFSHCI requires 1024 byte alignment of UTMRD
 	 */
@@ -3701,6 +3707,7 @@ static int ufshcd_memory_alloc(struct ufs_hba *hba)
 		goto out;
 	}
 
+skip_utmrdl:
 	/* Allocate memory for local reference block */
 	hba->lrb = devm_kcalloc(hba->dev,
 				hba->nutrs, sizeof(struct ufshcd_lrb),
@@ -8176,6 +8183,22 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
 	return ret;
 }
 
+/* SDB - Single Doorbell */
+static void ufshcd_release_sdb_queue(struct ufs_hba *hba, int nutrs)
+{
+	size_t ucdl_size, utrdl_size;
+
+	ucdl_size = sizeof(struct utp_transfer_cmd_desc) * nutrs;
+	dmam_free_coherent(hba->dev, ucdl_size, hba->ucdl_base_addr,
+			   hba->ucdl_dma_addr);
+
+	utrdl_size = sizeof(struct utp_transfer_req_desc) * nutrs;
+	dmam_free_coherent(hba->dev, utrdl_size, hba->utrdl_base_addr,
+			   hba->utrdl_dma_addr);
+
+	devm_kfree(hba->dev, hba->lrb);
+}
+
 static int ufshcd_config_mcq(struct ufs_hba *hba)
 {
 	int ret;
@@ -8183,12 +8206,25 @@ static int ufshcd_config_mcq(struct ufs_hba *hba)
 
 	hba->nutrs = ufshcd_mcq_decide_queue_depth(hba);
 	ret = ufshcd_mcq_init(hba);
-	if (ret) {
-		hba->nutrs = old_nutrs;
-		return ret;
+	if (ret)
+		goto err;
+
+	if (hba->nutrs != old_nutrs) {
+		ufshcd_release_sdb_queue(hba, old_nutrs);
+		ret = ufshcd_memory_alloc(hba);
+		if (ret)
+			goto err;
+		ufshcd_host_memory_configure(hba);
 	}
 
+	ret = ufshcd_mcq_memory_alloc(hba);
+	if (ret)
+		goto err;
+
 	return 0;
+err:
+	hba->nutrs = old_nutrs;
+	return ret;
 }
 
 /**
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index cb20eb1..8010b71 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -857,6 +857,8 @@ enum ufshcd_res {
  * @nr_queues: number of Queues of different queue types
  * @res: array of resource info of MCQ registers
  * @mcq_base: Multi circular queue registers base address
+ * @uhq: array of supported hardware queues
+ * @dev_cmd_queue: Queue for issuing device management commands
  */
 struct ufs_hba {
 	void __iomem *mmio_base;
@@ -1011,6 +1013,23 @@ struct ufs_hba {
 	unsigned int nr_queues[HCTX_MAX_TYPES];
 	struct ufshcd_res_info res[RES_MAX];
 	void __iomem *mcq_base;
+	struct ufs_hw_queue *uhq;
+	struct ufs_hw_queue *dev_cmd_queue;
+};
+
+/**
+ * @sqe_base_addr: submission queue entry base address
+ * @sqe_dma_addr: submission queue dma address
+ * @cqe_base_addr: completion queue base address
+ * @cqe_dma_addr: completion queue dma address
+ * @max_entries: max number of slots in this hardware queue
+ */
+struct ufs_hw_queue {
+	void *sqe_base_addr;
+	dma_addr_t sqe_dma_addr;
+	struct cq_entry *cqe_base_addr;
+	dma_addr_t cqe_dma_addr;
+	u32 max_entries;
 };
 
 static inline bool is_mcq_supported(struct ufs_hba *hba)
diff --git a/include/ufs/ufshci.h b/include/ufs/ufshci.h
index ca7db49d..7fa8faf 100644
--- a/include/ufs/ufshci.h
+++ b/include/ufs/ufshci.h
@@ -490,6 +490,27 @@ struct utp_transfer_req_desc {
 	__le16  prd_table_offset;
 };
 
+struct cq_entry {
+	/* DW 0-1 */
+	__le64 command_desc_base_addr;
+
+	/* DW 2 */
+	__le16  response_upiu_length;
+	__le16  response_upiu_offset;
+
+	/* DW 3 */
+	__le16  prd_table_length;
+	__le16  prd_table_offset;
+
+	/* DW 4 */
+	__le32 status;
+
+	/* DW 5-7 */
+	u32 reserved[3];
+};
+
+static_assert(sizeof(struct cq_entry) == 32);
+
 /*
  * UTMRD structure.
  */
-- 
2.7.4


  parent reply	other threads:[~2022-10-06  1:07 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-06  1:05 [PATCH v2 00/17] Add Multi Circular Queue Support Asutosh Das
2022-10-06  1:06 ` [PATCH v2 01/17] ufs: core: Probe for ext_iid support Asutosh Das
2022-10-06  1:06 ` [PATCH v2 02/17] ufs: core: Optimize duplicate code to read extended feature Asutosh Das
2022-10-06  1:06 ` [PATCH v2 03/17] ufs: core: Introduce Multi-circular queue capability Asutosh Das
2022-10-06  1:06 ` [PATCH v2 04/17] ufs: core: Defer adding host to scsi if mcq is supported Asutosh Das
2022-10-06  1:06 ` [PATCH v2 05/17] ufs: core: mcq: Introduce Multi Circular Queue Asutosh Das
2022-10-18  5:29   ` Eddie Huang
2022-10-18 16:00     ` Asutosh Das
2022-10-19 10:28       ` Eddie Huang
2022-10-06  1:06 ` [PATCH v2 06/17] ufs: core: mcq: Configure resource regions Asutosh Das
     [not found]   ` <5bd645ba24e1dc17343dd8d7b52fe6ea1eb6333d.camel@medaitek.com>
2022-10-14  9:31     ` Can Guo
     [not found]       ` <6592c7fe-0828-6bb3-17a8-9db53aac1873@quicinc.com>
2022-10-17  9:27         ` Fwd: " Eddie Huang
2022-10-18  1:47           ` Asutosh Das
2022-10-18  2:56             ` Eddie Huang
2022-10-19 19:50               ` Asutosh Das
2022-10-19 21:06                 ` Bart Van Assche
2022-10-19 22:11                   ` Asutosh Das
2022-10-20  1:13                   ` Eddie Huang
2022-10-06  1:06 ` [PATCH v2 07/17] ufs: core: mcq: Calculate queue depth Asutosh Das
2022-10-06  1:06 ` Asutosh Das [this message]
     [not found]   ` <813a86729b42693d2ac0b6e29ab7867feef69e23.camel@medaitek.com>
2022-10-17 21:17     ` [PATCH v2 08/17] ufs: core: mcq: Allocate memory for mcq mode Asutosh Das
2022-10-06  1:06 ` [PATCH v2 09/17] ufs: core: mcq: Configure operation and runtime interface Asutosh Das
2022-10-06  1:06 ` [PATCH v2 10/17] ufs: core: mcq: Use shared tags for MCQ mode Asutosh Das
2022-10-06  1:06 ` [PATCH v2 11/17] ufs: core: Prepare ufshcd_send_command for mcq Asutosh Das
2022-10-06  1:06 ` [PATCH v2 12/17] ufs: core: mcq: Find hardware queue to queue request Asutosh Das
2022-10-06  1:06 ` [PATCH v2 13/17] ufs: core: Prepare for completion in mcq Asutosh Das
2022-10-06  1:06 ` [PATCH v2 14/17] ufs: mcq: Add completion support of a cqe Asutosh Das
2022-10-06  1:06 ` [PATCH v2 15/17] ufs: core: mcq: Add completion support in poll Asutosh Das
2022-10-06  1:06 ` [PATCH v2 16/17] ufs: core: mcq: Enable Multi Circular Queue Asutosh Das
2022-10-06  1:06 ` [PATCH v2 17/17] ufs: qcom-host: Enable multi circular queue capability Asutosh Das
     [not found] ` <CGME20221006010736epcas2p20777225a537d4f2124e9a7264b2fffcf@epcms2p3>
2022-10-06  3:50   ` [PATCH v2 01/17] ufs: core: Probe for ext_iid support Daejun Park
2022-10-17 21:03     ` Asutosh Das
     [not found] ` <CGME20221006010745epcas2p38b37890b7e1fefb45b8fbb0e14ab0a82@epcms2p7>
2022-10-07  2:41   ` [PATCH v2 06/17] ufs: core: mcq: Configure resource regions Daejun Park
2022-10-17 20:54     ` Asutosh Das
     [not found] ` <CGME20221006010745epcas2p38b37890b7e1fefb45b8fbb0e14ab0a82@epcms2p8>
2022-10-07  3:44   ` Daejun Park
2022-10-17 21:03     ` (2) " Asutosh Das

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48b4a739e03056ad0e958ce65f7de5b79ce0ab02.1665017636.git.quic_asutoshd@quicinc.com \
    --to=quic_asutoshd@quicinc.com \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=mani@kernel.org \
    --cc=quic_bhaskarv@quicinc.com \
    --cc=quic_cang@quicinc.com \
    --cc=quic_nguyenb@quicinc.com \
    --cc=quic_nitirawa@quicinc.com \
    --cc=quic_rampraka@quicinc.com \
    --cc=quic_richardp@quicinc.com \
    --cc=quic_xiaosenh@quicinc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).