Re: [PATCH v5 13/22] dma: qcom: bam_dma: Add support to initialize interconnect path

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

On 10/11/2021 13:59, Bhupesh Sharma wrote:
> From: Thara Gopinath <thara.gopinath@linaro.org>
> 
> BAM dma engine associated with certain hardware blocks could require
> relevant interconnect pieces be initialized prior to the dma engine
> initialization. For e.g. crypto bam dma engine on sm8250. Such requirement
> is passed on to the bam dma driver from dt via the "interconnects"
> property.  Add support in bam_dma driver to check whether the interconnect
> path is accessible/enabled prior to attempting driver intializations.
> 
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> [Make header file inclusion alphabetical and use 'devm_of_icc_get()']
> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
> ---
>   drivers/dma/qcom/bam_dma.c | 11 +++++++++++
>   1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
> index c8a77b428b52..19fb17db467f 100644
> --- a/drivers/dma/qcom/bam_dma.c
> +++ b/drivers/dma/qcom/bam_dma.c
> @@ -26,6 +26,7 @@
>   #include <linux/kernel.h>
>   #include <linux/io.h>
>   #include <linux/init.h>
> +#include <linux/interconnect.h>
>   #include <linux/slab.h>
>   #include <linux/module.h>
>   #include <linux/interrupt.h>
> @@ -392,6 +393,7 @@ struct bam_device {
>   	const struct reg_offset_data *layout;
>   
>   	struct clk *bamclk;
> +	struct icc_path *mem_path;
>   	int irq;
>   
>   	/* dma start transaction tasklet */
> @@ -1284,6 +1286,15 @@ static int bam_dma_probe(struct platform_device *pdev)
>   		return ret;
>   	}
>   
> +	/* Ensure that interconnects are initialized */
> +	bdev->mem_path = devm_of_icc_get(bdev->dev, "memory");

Also, as a note, the "memory" is not a good name for the ICC path. 
Usually they take the form of "src-dst". However in this case you can 
probably use NULL for the first and the only icc path.

> +

Extra newline, not necessary.

> +	if (IS_ERR(bdev->mem_path)) {
> +		ret = PTR_ERR(bdev->mem_path);
> +		dev_err(bdev->dev, "failed to acquire icc path %d\n", ret);
> +		goto err_disable_clk;
> +	}
> +
>   	ret = bam_init(bdev);
>   	if (ret)
>   		goto err_disable_clk;


-- 
With best wishes
Dmitry