messages from 2019-11-19 05:58:44 to 2019-11-25 14:25:45 UTC [more...]
[PATCH v2 0/5] DTS changes to support cpufreq on QCS404
2019-11-25 14:25 UTC (6+ messages)
` [PATCH v2 1/5] arm64: dts: qcom: msm8916: Add the clocks for the APCS mux/divider
` [PATCH v2 2/5] arm64: dts: qcom: qcs404: Add HFPLL node
` [PATCH v2 3/5] arm64: dts: qcom: qcs404: Add the clocks for APCS mux/divider
` [PATCH v2 4/5] arm64: dts: qcom: qcs404: Add DVFS support
` [PATCH v2 5/5] arm64: defconfig: Enable HFPLL
[PATCH v3 0/7] Clock changes to support cpufreq on QCS404
2019-11-25 13:59 UTC (8+ messages)
` [PATCH v3 1/7] dt-bindings: mailbox: qcom: Add clock-name optional property
` [PATCH v3 2/7] clk: qcom: gcc: limit GPLL0_AO_OUT operating frequency
` [PATCH v3 3/7] clk: qcom: hfpll: register as clock provider
` [PATCH v3 4/7] clk: qcom: hfpll: CLK_IGNORE_UNUSED
` [PATCH v3 5/7] clk: qcom: hfpll: use clk_parent_data to specify the parent
` [PATCH v3 6/7] clk: qcom: apcs-msm8916: silently error out on EPROBE_DEFER
` [PATCH v3 7/7] clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent
[PATCH v2] ath10k: Handle "invalid" BDFs for msm8998 devices
2019-11-25 12:11 UTC (2+ messages)
[PATCH v6 1/5] Revert "tty: serial: qcom_geni_serial: Wakeup over UART RX"
2019-11-25 12:06 UTC (13+ messages)
` [PATCH v6 2/5] Revert "tty: serial: qcom_geni_serial: IRQ cleanup"
` [PATCH v6 3/5] tty: serial: qcom_geni_serial: IRQ cleanup
` [PATCH v6 4/5] tty: serial: qcom_geni_serial: Wakeup over UART RX
` [PATCH v6 5/5] tty: serial: qcom_geni_serial: Move loopback support to TIOCM_LOOP
[PATCH v6 0/5] Add wakeup support and move loopback to TIOCM_LOOP
2019-11-25 12:03 UTC (2+ messages)
[PATCH v2] ath10k: Fix qmi init error handling
2019-11-25 12:02 UTC (2+ messages)
[PATCH 0/4] Add support for SC7180 display
2019-11-25 11:59 UTC (5+ messages)
` [PATCH 1/4] dt-bindings: msm:disp: add sc7180 DPU variant
` [PATCH 2/4] msm:disp:dpu1: add support for display for SC7180 target
` [PATCH 3/4] msm:disp:dpu1: setup display datapath "
` [PATCH 4/4] msm:disp:dpu1: add mixer selection for display topology
[PATCH] ath10k: Handle when FW doesn't support QMI_WLFW_HOST_CAP_REQ_V01
2019-11-25 11:56 UTC (2+ messages)
[PATCH v2 00/13] cpuidle: psci: Support hierarchical CPU arrangement
2019-11-25 10:44 UTC (10+ messages)
` [PATCH v2 02/13] dt: psci: Update DT bindings to support hierarchical PSCI states
` [PATCH v2 10/13] cpuidle: psci: Prepare to use OS initiated suspend mode via PM domains
[PATCH 3/4] drm/msm: Use dma_resv locking wrappers
2019-11-25 9:43 UTC
[PATCH 1/2] tty: serial: msm_serial: Fix lockup for sysrq and oops
2019-11-25 1:21 UTC (4+ messages)
` [PATCH 2/2] tty: serial: msm_serial: Fix deadlock caused by recursive output
[PATCH] drm/msm/adreno: fix zap vs no-zap handling
2019-11-24 22:23 UTC
[PATCH v3] msm:disp:dpu1: add support for display for SC7180 target
2019-11-23 0:44 UTC (2+ messages)
[Patch v4 0/7] Introduce Power domain based warming device driver
2019-11-22 23:59 UTC (9+ messages)
` [Patch v4 1/7] PM/Domains: Add support for retrieving genpd performance states information
` [Patch v4 2/7] soc: qcom: rpmhpd: Introduce function to retrieve power domain performance state count
` [Patch v4 3/7] thermal: core: Allow cooling devices to register a parent
` [Patch v4 4/7] thermal: Add generic power domain warming device driver
` [Patch v4 5/7] soc: qcom: Extend RPMh power controller driver to register warming devices
` [Patch v4 6/7] dt-bindings: soc: qcom: Extend RPMh power controller binding to describe thermal warming device
` [Patch v4 7/7] arm64: dts: qcom: Indicate rpmhpd hosts a power domain that can be used as a "
[PATCH v2 1/8] dt-bindings: arm-smmu: Add Adreno GPU variant
2019-11-22 23:32 UTC (8+ messages)
` [PATCH v2 2/8] iommu: Add DOMAIN_ATTR_SPLIT_TABLES
` [PATCH v2 3/8] iommu/arm-smmu: Pass io_pgtable_cfg to impl specific init_context
` [PATCH v2 4/8] iommu/arm-smmu: Add split pagetables for Adreno IOMMU implementations
` [PATCH v2 5/8] drm/msm: Attach the IOMMU device during initialization
` [PATCH v2 8/8] arm64: dts: qcom: sdm845: Update Adreno GPU SMMU compatible string
` [PATCH v2 7/8] drm/msm/a6xx: Support split pagetables
` [PATCH v2 6/8] drm/msm: Refactor address space initialization
[PATCH v2 0/8] iommu/arm-smmu: Split pagetable support for Adreno GPUs
2019-11-22 23:31 UTC
[PATCH 01/16] remoteproc: q6v5-mss: fixup MSM8998 MSS out of reset sequence
2019-11-22 23:15 UTC (15+ messages)
` [PATCH 03/16] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for SC7180
` [PATCH 06/16] dt-bindings: remoteproc: qcom: Add power-domain bindings for Q6V5 PAS
` [PATCH 13/16] arm64: dts: qcom: msm8998: Update reserved memory map
` [PATCH 14/16] arm64: dts: qcom: msm8998: Add ADSP, MPSS and SLPI nodes
[PATCH v3 0/3] interconnect: Add basic tracepoints
2019-11-22 21:10 UTC (6+ messages)
` [PATCH v3 1/3] interconnect: Move internal structs into a separate file
` [PATCH v3 2/3] interconnect: Add a name to struct icc_path
` [PATCH v3 3/3] interconnect: Add basic tracepoints
[PATCH v5 2/3] tty: serial: qcom_geni_serial: Wakeup over UART RX
2019-11-22 18:24 UTC (6+ messages)
[PATCH v6 0/5] Add wakeup support and move loopback to TIOCM_LOOP
2019-11-22 14:17 UTC
[RESEND PATCH V4 2/4] rpmsg: glink: Add support to handle signals command
2019-11-22 10:06 UTC
[PATCH V5 1/5] rpmsg: glink: Use complete_all for open states
2019-11-22 10:05 UTC (4+ messages)
` [PATCH V5 3/5] rpmsg: glink: Add support for rpmsg glink chrdev
` [PATCH V5 4/5] rpmsg: glink: Expose rpmsg name attr for glink
` [PATCH V5 5/5] rpmsg: glink: unregister rpmsg device during endpoint destroy
Query regarding hid-multitouch.c driver in 4.14/4.19
2019-11-22 9:25 UTC (3+ messages)
[PATCH v5 3/3] tty: serial: qcom_geni_serial: Remove sysfs file
2019-11-22 6:47 UTC (5+ messages)
[PATCH v2 0/4] drm/msm/gpu: add support for ocmem interconnect
2019-11-22 1:26 UTC (5+ messages)
` [PATCH v2 1/4] dt-bindings: drm/msm/gpu: document second interconnect
` [PATCH v2 2/4] drm/msm/gpu: add support for ocmem interconnect path
` [PATCH v2 3/4] drm/msm/a3xx: set interconnect bandwidth vote
` [PATCH v2 4/4] drm/msm/a4xx: "
[PATCH v3 0/1] Add USB related nodes for SC7180
2019-11-22 0:51 UTC (3+ messages)
` [PATCH v3 1/1] arm64: dts: qcom: sc7180: Add USB related nodes
[PATCH] drivers: thermal: step_wise: add support for hysteresis
2019-11-21 21:07 UTC (5+ messages)
[PATCH v10 2/4] dt-bindings: clock: Convert qcom,mmcc to DT schema
2019-11-21 20:20 UTC (2+ messages)
[PATCH 2/3] dt-bindings: soc: qcom: apr: Add protection domain bindings
2019-11-21 16:04 UTC (8+ messages)
` [PATCH 1/3] soc: qcom: Introduce Protection Domain Restart helpers
` [PATCH 3/3] soc: qcom: apr: Add avs/audio tracking functionality
[PATCH] ARM: dts: qcom: Add nodes for SMP boot in IPQ40xx
2019-11-21 15:29 UTC
[PATCH v2] pinctrl: Fix Kconfig indentation
2019-11-21 14:06 UTC (2+ messages)
[PATCH v3 1/2] dt-bindings: interconnect: Add OSM L3 DT bindings
2019-11-21 12:58 UTC (6+ messages)
` [PATCH v3 2/2] interconnect: qcom: Add OSM L3 interconnect provider support
[PATCH 3/3] drm/msm: Don't init ww_mutec acquire ctx before needed
2019-11-21 10:03 UTC (6+ messages)
` [PATCH] "
[PATCH v5 0/4] usb: xhci: Add support for Renesas USB controllers
2019-11-21 4:54 UTC (2+ messages)
[PATCH v2] interconnect: qcom: Fix Kconfig indentation
2019-11-21 3:21 UTC
[PATCH v2] clk: Fix Kconfig indentation
2019-11-21 3:18 UTC
[PATCH] pinctrl: Fix Kconfig indentation
2019-11-21 1:27 UTC (3+ messages)
qcom: Add SDM845 remoteproc firmware files
2019-11-21 0:22 UTC
[PATCH] soc: qcom: Fix Kconfig indentation
2019-11-20 13:39 UTC
[PATCH] interconnect: qcom: Fix Kconfig indentation
2019-11-20 13:33 UTC
[PATCH v3] msm:disp:dpu1: setup display datapath for SC7180 target
2019-11-20 12:24 UTC
[PATCH 1/6] soc: qcom: rpmhpd: Set 'active_only' for active only power domains
2019-11-20 12:16 UTC (25+ messages)
` [PATCH 2/6] dt-bindings: power: Add rpmh power-domain bindings for SM8150
` [PATCH 3/6] soc: qcom: rpmhpd: Add SM8150 RPMH power-domains
` [PATCH 4/6] dt-bindings: power: Add rpmh power-domain bindings for sc7180
` [PATCH 5/6] soc: qcom: rpmhpd: Add SC7180 RPMH power-domains
` [PATCH 6/6] arm64: dts: sm8150: Add rpmh power-domain node
[PATCH v6 0/5] Add support for QCOM Core Power Reduction
2019-11-20 12:00 UTC (13+ messages)
` [PATCH v6 1/5] dt-bindings: power: avs: Add support for CPR (Core Power Reduction)
` [PATCH v6 2/5] "
` [PATCH v6 3/5] arm64: dts: qcom: qcs404: Add CPR and populate OPP table
` [PATCH v6 4/5] arm64: defconfig: enable CONFIG_QCOM_CPR
` [PATCH v6 5/5] arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM
[PATCH] msm: disp: dpu1: add support to access hw irqs regs depending on revision
2019-11-20 11:32 UTC
[PATCH v2] msm:disp:dpu1: setup display datapath for SC7180 target
2019-11-20 11:13 UTC
[PATCH v2] msm:disp:dpu1: add support for display for SC7180 target
2019-11-20 10:53 UTC
[PATCH] soc: qcom: rpmhpd: Set 'active_only' for active only power domains
2019-11-20 1:36 UTC (3+ messages)
[PATCH] dt-bindings: power: Fix path to power-domain.txt bindings
2019-11-20 1:26 UTC (5+ messages)
[PATCH v2 00/18] Restructure, improve target support for qcom_scm driver
2019-11-19 22:13 UTC (17+ messages)
` [PATCH v2 01/18] firmware: qcom_scm: Rename macros and structures
` [PATCH v2 10/18] firmware: qcom_scm-64: Improve SMC convention detection
` [PATCH v2 12/18] firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls
` [PATCH v2 13/18] firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call
` [PATCH v2 14/18] firmware: qcom_scm-32: Create common legacy atomic call
` [PATCH v2 15/18] firmware: qcom_scm-32: Add device argument to atomic calls
Using a GPIO as an interrupt line
2019-11-19 19:35 UTC (11+ messages)
[PATCH] drm/msm/dpu: Mark various data tables as const
2019-11-19 18:48 UTC
[PATCH v1] msm:disp:dpu1: add support for display for SC7180 target
2019-11-19 18:05 UTC (2+ messages)
[PATCH v2] arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3
2019-11-19 15:37 UTC (2+ messages)
[PATCH v2 00/12] Support wakeup capable GPIOs
2019-11-19 14:51 UTC (3+ messages)
` [PATCH v2 08/12] drivers: pinctrl: msm: setup GPIO chip in hierarchy
[PATCH v5 0/5] Add support for QCOM Core Power Reduction
2019-11-19 14:45 UTC (4+ messages)
` [PATCH v5 5/5] arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM
[v2] msm: disp: dpu1: add support to access hw irqs regs depending on revision
2019-11-19 12:40 UTC (3+ messages)
[PATCH v3] msm:disp:dpu1: add support to access hw irqs regs depending on revision
2019-11-19 11:34 UTC
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).