messages from 2020-03-10 20:29:09 to 2020-03-13 10:16:55 UTC [more...]
[RESEND PATCH v2 0/9] ALSA: compress: Add wma, alac and ape support
2020-03-13 10:16 UTC (4+ messages)
` [RESEND PATCH v2 1/9] ALSA: compress: add wma codec profiles
` [RESEND PATCH v2 2/9] ALSA: compress: Add wma decoder params
` [RESEND PATCH v2 3/9] ASoC: qcom: q6asm: pass codec profile to q6asm_open_write
[PATCH v4 0/4] Add support for devices in the Energy Model
2020-03-13 10:15 UTC (6+ messages)
` [PATCH v4 1/4] PM / EM: add devices to "
` [PATCH v4 2/4] OPP: change parameter to device pointer in dev_pm_opp_of_register_em()
[PATCH v2 0/9] ALSA: compress: Add wma, alac and ape support
2020-03-13 10:13 UTC (2+ messages)
[PATCH v2 1/9] ALSA: compress: add wma codec profiles
2020-03-13 10:07 UTC (9+ messages)
` [PATCH v2 2/9] ALSA: compress: Add wma decoder params
` [PATCH v2 3/9] ASoC: qcom: q6asm: pass codec profile to q6asm_open_write
` [PATCH v2 4/9] ASoC: qcom: q6asm: add support to wma config
` [PATCH v2 5/9] ASoC: qcom: q6asm-dai: add support to wma decoder
` [PATCH v2 6/9] ALSA: compress: add alac & ape decoder params
` [PATCH v2 7/9] ASoC: qcom: q6asm: add support for alac and ape configs
` [PATCH v2 8/9] ASoC: qcom: q6asm-dai: add support for ALAC and APE decoders
` [PATCH v2 9/9] ALSA: compress: bump the version
[PATCH v13 0/4] Invoke rpmh_flush for non OSI targets
2020-03-13 8:53 UTC (13+ messages)
` [PATCH v13 2/5] soc: qcom: rpmh: Update dirty flag only when data changes
` [PATCH v13 4/5] soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches
` [PATCH v13 5/5] drivers: qcom: Update rpmh clients to use start and end transactions
[PATCH 0/9] ALSA: compress: Add wma, alac and ape support
2020-03-13 7:53 UTC (12+ messages)
` [PATCH 1/9] ALSA: compress: add wma codec profiles
` [PATCH 2/9] ALSA: compress: Add wma decoder params
` [PATCH 3/9] ASoC: qcom: q6asm: pass codec profile to q6asm_open_write
` [PATCH 4/9] ASoC: qcom: q6asm: add support to wma config
` [PATCH 5/9] ASoC: qcom: q6asm-dai: add support to wma decoder
` [PATCH 6/9] ALSA: compress: add alac & ape decoder params
` [PATCH 7/9] ASoC: qcom: q6asm: add support for alac and ape configs
` [PATCH 8/9] ASoC: qcom: q6asm-dai: add support for ALAC and APE decoders
` [PATCH 9/9] ALSA: compress: bump the version
[PATCH] arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware
2020-03-13 2:37 UTC (2+ messages)
[PATCH 0/2] net: fix net-next
2020-03-12 22:48 UTC (4+ messages)
` [PATCH 1/2] bitfield.h: add FIELD_MAX() and field_max()
` [PATCH 2/2] Revert "arm64: dts: sdm845: add IPA information"
[RFC v5 0/2] Add SDHC interconnect bandwidth scaling
2020-03-12 20:49 UTC (4+ messages)
` [RFC v5 1/2] mmc: sdhci-msm: Add interconnect bus bandwidth scaling support
` [RFC v5 2/2] dt-bindings: mmc: sdhci-msm: Add interconnect BW scaling strings
[RFC PATCH v3 0/4] Inline crypto support on DragonBoard 845c
2020-03-12 19:05 UTC (7+ messages)
` [RFC PATCH v3 1/4] firmware: qcom_scm: Add support for programming inline crypto keys
` [RFC PATCH v3 2/4] arm64: dts: sdm845: add Inline Crypto Engine registers and clock
` [RFC PATCH v3 3/4] scsi: ufs: add program_key() variant op
` [RFC PATCH v3 4/4] scsi: ufs-qcom: add Inline Crypto Engine support
[PATCH v2 0/3] Convert thermal bindings to yaml
2020-03-12 19:01 UTC (7+ messages)
` [PATCH v2 1/3] dt-bindings: thermal: Add yaml bindings for thermal sensors
` [PATCH v2 2/3] dt-bindings: thermal: Add yaml bindings for thermal cooling-devices
` [PATCH v2 3/3] dt-bindings: thermal: Add yaml bindings for thermal zones
[PATCH v7 0/8] thermal: tsens: Handle critical interrupts
2020-03-12 18:12 UTC (10+ messages)
` [PATCH v7 1/8] drivers: thermal: tsens: De-constify struct tsens_features
` [PATCH v7 2/8] drivers: thermal: tsens: Pass around struct tsens_sensor as a constant
` [PATCH v7 3/8] drivers: thermal: tsens: use simpler variables
` [PATCH v7 4/8] drivers: thermal: tsens: Release device in success path
` [PATCH v7 5/8] drivers: thermal: tsens: Add critical interrupt support
` [PATCH v7 6/8] drivers: thermal: tsens: Add watchdog support
` [PATCH v7 7/8] drivers: thermal: tsens: kernel-doc fixup
` [PATCH v7 8/8] drivers: thermal: tsens: Remove unnecessary irq flag
[PATCH] drm/msm: avoid double-attaching hdmi/edp bridges
2020-03-12 16:44 UTC (3+ messages)
[PATCH v6 0/2] Add support for rm69299 Visionox panel driver and add devicetree bindings for visionox panel
2020-03-12 15:17 UTC (5+ messages)
` [PATCH v6 1/2] dt-bindings: display: add visionox rm69299 panel variant
` [PATCH v6 2/2] drm/panel: add support for rm69299 visionox panel driver
[PATCH v2 0/5] arm64: dts: qcom: sdm845: add audio support
2020-03-12 14:30 UTC (6+ messages)
` [PATCH v2 1/5] arm64: dts: qcom: sdm845: add slimbus nodes
` [PATCH v2 2/5] arm64: dts: qcom: sdm845: add apr nodes
` [PATCH v2 3/5] arm64: dts: qcom: c630: Enable audio support
` [PATCH v2 4/5] arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s
` [PATCH v2 5/5] arm64: dts: qcom: db845c: add analog audio support
[RFC v2] pdc: Introduce irq_set_wake call
2020-03-12 13:22 UTC (2+ messages)
` [RFC v2] irqchip: qcom: "
[PATCH v6 0/8] thermal: tsens: Handle critical interrupts
2020-03-12 12:33 UTC (3+ messages)
[PATCH v7 0/3] Introduce Protection Domain Restart (PDR) Helpers
2020-03-12 12:08 UTC (4+ messages)
` [PATCH v7 1/3] soc: qcom: Introduce Protection Domain Restart helpers
` [PATCH v7 2/3] dt-bindings: soc: qcom: apr: Add protection domain bindings
` [PATCH v7 3/3] soc: qcom: apr: Add avs/audio tracking functionality
[PATCH 0/3] Request direct mapping for modem firmware subdevice
2020-03-12 12:05 UTC (7+ messages)
[RFC 0/2] pdc: Introduce irq_set_wake call
2020-03-12 11:38 UTC (7+ messages)
` [RFC 1/2] irqchip: qcom: "
[PATCH] cpufreq: qcom: Add support for krait based socs
2020-03-12 10:12 UTC (2+ messages)
[PATCH 1/2] firmware: qcom_scm: add ipq806x with no clock
2020-03-12 9:25 UTC (4+ messages)
` [PATCH 2/2] devicetree: bindings: firmware: add ipq806x to qcom_scm
` R: [PATCH 1/2] firmware: qcom_scm: add ipq806x with no clock
[PATCH V3 0/2] Fix RX cancel command failure
2020-03-12 9:10 UTC (3+ messages)
` [PATCH V3 2/2] tty: serial: qcom_geni_serial: "
[PATCH] dt-bindings: soc: qcom: fix IPA binding
2020-03-12 7:05 UTC (2+ messages)
[PATCH v6 0/5] usb: xhci: Add support for Renesas USB controllers
2020-03-12 6:56 UTC (9+ messages)
[v1 0/6] Qualcomm CCI & Camera for db410c & db845c
2020-03-12 5:35 UTC (13+ messages)
` [v1 1/6] arm64: dts: msm8916: Add i2c-qcom-cci node
` [v1 2/6] arm64: dts: apq8016-sbc: Add CCI/Sensor nodes
` [v1 3/6] arm64: dts: sdm845: Add i2c-qcom-cci node
` [v1 4/6] arm64: dts: sdm845-db845c: Add pm_8998 gpio names
` [v1 5/6] arm64: dts: sdm845-db845c: Add ov8856 & ov7251 camera nodes
` [v1 6/6] arm64: defconfig: Enable QCOM CAMCC, CAMSS and CCI drivers
[PATCH] arm64: defconfig: Enable Truly NT35597 WQXGA panel
2020-03-12 5:21 UTC (2+ messages)
[PATCH v2 00/17] net: introduce Qualcomm IPA driver (UPDATED)
2020-03-12 3:09 UTC (10+ messages)
` [PATCH v2 15/17] soc: qcom: ipa: support build of IPA code
` [PATCH v2 17/17] arm64: dts: sdm845: add IPA information
[PATCH 0/4] remoteproc: some bug fixes
2020-03-12 2:58 UTC (5+ messages)
` [PATCH 1/4] remoteproc: re-check state in rproc_trigger_recovery()
[PATCH -next] drm/msm/dpu: Remove some set but not used variables
2020-03-12 0:25 UTC
[PATCH v4 0/5] remoteproc: qcom: PIL info support
2020-03-11 23:32 UTC (6+ messages)
` [PATCH v4 2/5] remoteproc: qcom: Introduce driver to store pil info in IMEM
[RFT PATCH v2 00/10] drivers: qcom: rpmh-rsc: Cleanup / add lots of comments
2020-03-11 23:13 UTC (11+ messages)
` [RFT PATCH v2 01/10] drivers: qcom: rpmh-rsc: Clean code reading/writing regs/cmds
` [RFT PATCH v2 02/10] drivers: qcom: rpmh-rsc: Document the register layout better
` [RFT PATCH v2 03/10] drivers: qcom: rpmh-rsc: Fold tcs_ctrl_write() into its single caller
` [RFT PATCH v2 04/10] drivers: qcom: rpmh-rsc: Remove get_tcs_of_type() abstraction
` [RFT PATCH v2 05/10] drivers: qcom: rpmh-rsc: A lot of comments
` [RFT PATCH v2 06/10] drivers: qcom: rpmh-rsc: Comment tcs_is_free() + warn if state mismatch
` [RFT PATCH v2 07/10] drivers: qcom: rpmh-rsc: Warning if tcs_write() used for non-active
` [RFT PATCH v2 08/10] drivers: qcom: rpmh-rsc: spin_lock_irqsave() for tcs_invalidate()
` [RFT PATCH v2 09/10] drivers: qcom: rpmh-rsc: Kill cmd_cache and find_match() with fire
` [RFT PATCH v2 10/10] drivers: qcom: rpmh-rsc: Always use -EAGAIN, never -EBUSY
[RFT PATCH 0/9] drivers: qcom: rpmh-rsc: Cleanup / add lots of comments
2020-03-11 22:35 UTC (19+ messages)
` [RFT PATCH 1/9] drivers: qcom: rpmh-rsc: Clean code reading/writing regs/cmds
` [RFT PATCH 2/9] drivers: qcom: rpmh-rsc: Document the register layout better
` [RFT PATCH 3/9] drivers: qcom: rpmh-rsc: Fold tcs_ctrl_write() into its single caller
` [RFT PATCH 4/9] drivers: qcom: rpmh-rsc: Remove get_tcs_of_type() abstraction
` [RFT PATCH 6/9] drivers: qcom: rpmh-rsc: Only use "tcs_in_use" for ACTIVE_ONLY
` [RFT PATCH 9/9] drivers: qcom: rpmh-rsc: Kill cmd_cache and find_match() with fire
[PATCH 0/7] DWC3/Qualcomm connector based role-switching
2020-03-11 19:15 UTC (8+ messages)
` [PATCH 1/7] usb: dwc3: Registering a role switch in the DRD code
` [PATCH 2/7] dt-bindings: usb: dwc3: Add a gpio-usb-connector example
` [PATCH 3/7] dt-bindings: usb: dwc3: Add a usb-role-switch to the example
` [PATCH 4/7] usb: dwc3: qcom: Add support for usb-conn-gpio connectors
` [PATCH 5/7] usb: dwc3: "
` [PATCH 6/7] usb: dwc3: Add support for a role-switch notifier
` [PATCH 7/7] usb: dwc3: qcom: Enable gpio-usb-conn based role-switching
[PATCH 0/6] Add DT bindings for USB HS/SS in QCS404
2020-03-11 19:15 UTC (7+ messages)
` [PATCH 1/6] arm64: dts: qcom: qcs404: Add USB devices and PHYs
` [PATCH 2/6] arm64: dts: qcom: qcs404-evb: Define VBUS pins
` [PATCH 3/6] arm64: dts: qcom: qcs404-evb: Define USB ID pin
` [PATCH 4/6] arm64: dts: qcom: qcs404-evb: Describe external VBUS regulator
` [PATCH 5/6] arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltage
` [PATCH 6/6] arm64: dts: qcom: qcs404-evb: Enable USB controllers
[PATCH 0/5] Enable Qualcomm QCS 404 HS/SS USB PHYs
2020-03-11 19:13 UTC (6+ messages)
` [PATCH 1/5] dt-bindings: phy: remove qcom-dwc3-usb-phy
` [PATCH 2/5] dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding
` [PATCH 3/5] phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver
` [PATCH 4/5] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings
` [PATCH 5/5] phy: qualcomm: usb: Add SuperSpeed PHY driver
[PATCH v4 0/4] Add QMP V3 USB3 PHY support for SC7180
2020-03-11 17:51 UTC (6+ messages)
` [PATCH v4 1/4] dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml
` [PATCH v4 2/4] dt-bindings: phy: qcom,qmp: Add support for SC7180
` [PATCH v4 3/4] phy: qcom-qmp: Add QMP V3 USB3 PHY "
` [PATCH v4 4/4] arm64: dts: qcom: sc7180: Correct qmp phy reset entries
[PATCH] arm64: dts: qcom: qcs404: Enable CQE support for eMMC
2020-03-11 17:14 UTC (2+ messages)
` [PATCH] arm64: dts: qcom: sc7180: Update reg names for SDHC
[PATCH V4 0/3] Convert QUP bindings to YAML and add ICC, pin swap doc
2020-03-11 13:04 UTC (6+ messages)
` [PATCH V4 3/3] dt-bindings: geni-se: Add binding for UART pin swap
[PATCH 0/6] Add interconnect support to UART, I2C, SPI and QSPI
2020-03-11 13:02 UTC (3+ messages)
[PATCH v2] clk: qcom: clk-rpm: add missing rpm clk for ipq806x
2020-03-11 12:46 UTC (3+ messages)
` R: "
[PATCH V3 0/4] Add support for WLED5
2020-03-11 10:30 UTC (13+ messages)
` [PATCH V3 1/4] backlight: qcom-wled: convert the wled bindings to .yaml format
` [PATCH V3 2/4] backlight: qcom-wled: Add callback functions
` [PATCH V3 3/4] backlight: qcom-wled: Add support for WLED5 peripheral in PM8150L
[PATCH v1] Bluetooth: hci_qca: Replace devm_gpiod_get() with devm_gpiod_get_optional()
2020-03-11 9:24 UTC (2+ messages)
[PATCH] arm64: dts: msm8916: Add fastrpc node
2020-03-11 9:22 UTC (2+ messages)
[PATCH] drm/msm: Use scnprintf() for avoiding potential buffer overflow
2020-03-11 7:34 UTC
[PATCH v2 0/3] Misc qcom geni i2c driver fixes
2020-03-11 7:30 UTC (7+ messages)
` [PATCH v2 1/3] i2c: qcom-geni: Let firmware specify irq trigger flags
` [PATCH v2 2/3] i2c: qcom-geni: Grow a dev pointer to simplify code
` [PATCH v2 3/3] i2c: qcom-geni: Drop of_platform.h include
[PATCH v10 0/3] Invoke rpmh_flush for non OSI targets
2020-03-11 5:40 UTC (8+ messages)
` [PATCH v10 2/3] soc: qcom: rpmh: Update dirty flag only when data changes
[PATCH -next 011/491] ARM/QUALCOMM SUPPORT: Use fallthrough;
2020-03-11 5:23 UTC (2+ messages)
[PATCH] venus: avoid extra locking in driver
2020-03-11 3:04 UTC (4+ messages)
[PATCH] arm64: dts: sc7180: Include interconnect definitions
2020-03-10 23:16 UTC
[DPU PATCH v4 0/5] Add support for DisplayPort driver on SnapDragon
2020-03-10 21:24 UTC (3+ messages)
` [DPU PATCH v4 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).