* [PATCH] dt-bindings: pinctrl: fix spelling mistakes in pinctl documentation
@ 2019-05-25 20:42 Colin King
2019-05-26 5:45 ` Bjorn Andersson
2019-05-27 9:10 ` Linus Walleij
0 siblings, 2 replies; 3+ messages in thread
From: Colin King @ 2019-05-25 20:42 UTC (permalink / raw)
To: Andy Gross, David Brown, Bjorn Andersson, Linus Walleij,
Rob Herring, Mark Rutland, linux-arm-msm, linux-gpio, devicetree
Cc: kernel-janitors, linux-kernel
From: Colin Ian King <colin.king@canonical.com>
The spelling of configured is incorrect in the documentation. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
.../devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt | 6 +++---
.../devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt | 6 +++---
.../devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt | 6 +++---
.../devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt | 6 +++---
.../devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt | 6 +++---
.../devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt | 6 +++---
.../devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt | 6 +++---
.../devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt | 6 +++---
.../devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt | 6 +++---
.../devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt | 6 +++---
.../devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt | 6 +++---
11 files changed, 33 insertions(+), 33 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
index 68e93d5b7ede..c9782397ff14 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
@@ -122,17 +122,17 @@ to specify in a pin configuration subnode:
- bias-disable:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as no pull.
+ Definition: The specified pins should be configured as no pull.
- bias-pull-down:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull down.
+ Definition: The specified pins should be configured as pull down.
- bias-pull-up:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull up.
+ Definition: The specified pins should be configured as pull up.
- output-high:
Usage: optional
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
index 6dd72f8599e9..7b151894f5a0 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
@@ -118,17 +118,17 @@ to specify in a pin configuration subnode:
- bias-disable:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as no pull.
+ Definition: The specified pins should be configured as no pull.
- bias-pull-down:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull down.
+ Definition: The specified pins should be configured as pull down.
- bias-pull-up:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull up.
+ Definition: The specified pins should be configured as pull up.
- output-high:
Usage: optional
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt
index 86ecdcfc4fb8..d46973968873 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt
@@ -97,17 +97,17 @@ to specify in a pin configuration subnode:
- bias-disable:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as no pull.
+ Definition: The specified pins should be configured as no pull.
- bias-pull-down:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull down.
+ Definition: The specified pins should be configured as pull down.
- bias-pull-up:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull up.
+ Definition: The specified pins should be configured as pull up.
- output-high:
Usage: optional
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt
index 195a7a0ef0cc..3354a63296d9 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt
@@ -130,17 +130,17 @@ to specify in a pin configuration subnode:
- bias-disable:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as no pull.
+ Definition: The specified pins should be configured as no pull.
- bias-pull-down:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull down.
+ Definition: The specified pins should be configured as pull down.
- bias-pull-up:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull up.
+ Definition: The specified pins should be configured as pull up.
- output-high:
Usage: optional
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt
index 5034eb6653c7..a7dd213c77c6 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt
@@ -124,17 +124,17 @@ to specify in a pin configuration subnode:
- bias-disable:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as no pull.
+ Definition: The specified pins should be configured as no pull.
- bias-pull-down:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull down.
+ Definition: The specified pins should be configured as pull down.
- bias-pull-up:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull up.
+ Definition: The specified pins should be configured as pull up.
- output-high:
Usage: optional
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
index f15443f6e78e..da52df6273bc 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
@@ -128,17 +128,17 @@ to specify in a pin configuration subnode:
- bias-disable:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as no pull.
+ Definition: The specified pins should be configured as no pull.
- bias-pull-down:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull down.
+ Definition: The specified pins should be configured as pull down.
- bias-pull-up:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull up.
+ Definition: The specified pins should be configured as pull up.
- output-high:
Usage: optional
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt
index fa97f609fe45..a56cb882830c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt
@@ -149,17 +149,17 @@ to specify in a pin configuration subnode:
- bias-disable:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as no pull.
+ Definition: The specified pins should be configured as no pull.
- bias-pull-down:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull down.
+ Definition: The specified pins should be configured as pull down.
- bias-pull-up:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull up.
+ Definition: The specified pins should be configured as pull up.
- output-high:
Usage: optional
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
index e70c79bbbc5b..00174f08ba1d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
@@ -135,17 +135,17 @@ to specify in a pin configuration subnode:
- bias-disable:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as no pull.
+ Definition: The specified pins should be configured as no pull.
- bias-pull-down:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull down.
+ Definition: The specified pins should be configured as pull down.
- bias-pull-up:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull up.
+ Definition: The specified pins should be configured as pull up.
- output-high:
Usage: optional
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt
index 2b8f77762edc..a50e74684195 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt
@@ -150,17 +150,17 @@ to specify in a pin configuration subnode:
- bias-disable:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as no pull.
+ Definition: The specified pins should be configured as no pull.
- bias-pull-down:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull down.
+ Definition: The specified pins should be configured as pull down.
- bias-pull-up:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull up.
+ Definition: The specified pins should be configured as pull up.
- output-high:
Usage: optional
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
index 769ca83bb40d..be034d329e10 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
@@ -142,17 +142,17 @@ to specify in a pin configuration subnode:
- bias-disable:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as no pull.
+ Definition: The specified pins should be configured as no pull.
- bias-pull-down:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull down.
+ Definition: The specified pins should be configured as pull down.
- bias-pull-up:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull up.
+ Definition: The specified pins should be configured as pull up.
- output-high:
Usage: optional
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt
index 665aadb5ea28..321bdb9be0d2 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt
@@ -118,17 +118,17 @@ to specify in a pin configuration subnode:
- bias-disable:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as no pull.
+ Definition: The specified pins should be configured as no pull.
- bias-pull-down:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull down.
+ Definition: The specified pins should be configured as pull down.
- bias-pull-up:
Usage: optional
Value type: <none>
- Definition: The specified pins should be configued as pull up.
+ Definition: The specified pins should be configured as pull up.
- output-high:
Usage: optional
--
2.20.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] dt-bindings: pinctrl: fix spelling mistakes in pinctl documentation
2019-05-25 20:42 [PATCH] dt-bindings: pinctrl: fix spelling mistakes in pinctl documentation Colin King
@ 2019-05-26 5:45 ` Bjorn Andersson
2019-05-27 9:10 ` Linus Walleij
1 sibling, 0 replies; 3+ messages in thread
From: Bjorn Andersson @ 2019-05-26 5:45 UTC (permalink / raw)
To: Colin King
Cc: Andy Gross, David Brown, Linus Walleij, Rob Herring,
Mark Rutland, linux-arm-msm, linux-gpio, devicetree,
kernel-janitors, linux-kernel
On Sat 25 May 13:42 PDT 2019, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
>
> The spelling of configured is incorrect in the documentation. Fix it.
>
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Thanks,
Bjorn
> ---
> .../devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt | 6 +++---
> 11 files changed, 33 insertions(+), 33 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
> index 68e93d5b7ede..c9782397ff14 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
> @@ -122,17 +122,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
> index 6dd72f8599e9..7b151894f5a0 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
> @@ -118,17 +118,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt
> index 86ecdcfc4fb8..d46973968873 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt
> @@ -97,17 +97,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt
> index 195a7a0ef0cc..3354a63296d9 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt
> @@ -130,17 +130,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt
> index 5034eb6653c7..a7dd213c77c6 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt
> @@ -124,17 +124,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
> index f15443f6e78e..da52df6273bc 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
> @@ -128,17 +128,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt
> index fa97f609fe45..a56cb882830c 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt
> @@ -149,17 +149,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
> index e70c79bbbc5b..00174f08ba1d 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
> @@ -135,17 +135,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt
> index 2b8f77762edc..a50e74684195 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt
> @@ -150,17 +150,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
> index 769ca83bb40d..be034d329e10 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
> @@ -142,17 +142,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt
> index 665aadb5ea28..321bdb9be0d2 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt
> @@ -118,17 +118,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> --
> 2.20.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] dt-bindings: pinctrl: fix spelling mistakes in pinctl documentation
2019-05-25 20:42 [PATCH] dt-bindings: pinctrl: fix spelling mistakes in pinctl documentation Colin King
2019-05-26 5:45 ` Bjorn Andersson
@ 2019-05-27 9:10 ` Linus Walleij
1 sibling, 0 replies; 3+ messages in thread
From: Linus Walleij @ 2019-05-27 9:10 UTC (permalink / raw)
To: Colin King
Cc: Andy Gross, David Brown, Bjorn Andersson, Rob Herring,
Mark Rutland, MSM, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
kernel-janitors, linux-kernel
On Sat, May 25, 2019 at 10:42 PM Colin King <colin.king@canonical.com> wrote:
> From: Colin Ian King <colin.king@canonical.com>
>
> The spelling of configured is incorrect in the documentation. Fix it.
>
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
Patch applied with Bjorn's review tag.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-05-27 9:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-25 20:42 [PATCH] dt-bindings: pinctrl: fix spelling mistakes in pinctl documentation Colin King
2019-05-26 5:45 ` Bjorn Andersson
2019-05-27 9:10 ` Linus Walleij
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).