* [PATCH v10 0/5] arm64: dts: qcom: sc7180: Add five new trogdor-based boards
@ 2022-06-22 21:58 Joseph S. Barrera III
2022-06-22 21:58 ` [PATCH v10 1/5] arm64: dts: qcom: sc7180: Add wormdingler dts files Joseph S. Barrera III
` (5 more replies)
0 siblings, 6 replies; 8+ messages in thread
From: Joseph S. Barrera III @ 2022-06-22 21:58 UTC (permalink / raw)
To: LKML
Cc: Stephen Boyd, Douglas Anderson, Alexandru M Stan,
Joseph S. Barrera III, Andy Gross, Bjorn Andersson,
Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm
This series adds five new trogdor-based boards to upstream.
The patches should be applied *after* applying
https://lore.kernel.org/all/20220602190621.1646679-1-swboyd@chromium.org/
(arm64: dts: qcom: Remove duplicate sc7180-trogdor include on lazor/homestar)
The patches do *not* expect
https://lore.kernel.org/all/20220518172525.3319993-1-swboyd@chromium.org/
(sc7180-trogdor: Split out keyboard node and describe detachables)
to be applied.
The compatibles in this series are documented by Doug's series
https://lore.kernel.org/r/20220520143502.v4.5.Ie8713bc0377672ed8dd71189e66fc0b77226fb85@changeid
Version 9 included many corrections to the series change descriptions,
based on fetching earlier versions of the series and diffing each patch.
Changes in v10:
- Remove 'include sc7180.dtsi' from *all* sc7180-trogdor-pazquel* files.
- Remove 'include sc7180.dtsi' from *all* sc7180-trogdor-kingoftown* files.
- Move "okay" for ap_tp_i2c to proper location.
Changes in v9:
- Restore two lines accidentally removed from ap_sar_sensor.
- Simplify trackpad enabling (51d30402be75).
- Simplify trackpad enabling (51d30402be75).
Changes in v8:
- Incorporate the deletion of the usb_c1 node from 9f9fb70a7294.
Changes in v7:
- Restore changes requested by Doug.
- Restore changes requested by Doug.
- Only include sc7180.dtsi in sc7180-trogdor.dtsi (19794489fa24).
- Simplify spi0/spi6 labeling (d277cab7afc7).
- Simplify trackpad enabling (51d30402be75).
- Restore mrbland patch.
- Only include sc7180.dtsi in sc7180-trogdor.dtsi (19794489fa24).
- Simplify spi0/spi6 labeling (d277cab7afc7).
- Simplify trackpad enabling (51d30402be75).
- Only include sc7180.dtsi in sc7180-trogdor.dtsi (19794489fa24).
- Simplify spi0/spi6 labeling (d277cab7afc7).
- Remove #include of <arm/cros-ec-keyboard.dtsi>.
- Accidentally removed two lines from ap_sar_sensor.
- Simplify spi0/spi6 labeling (d277cab7afc7).
- Remove #include of <arm/cros-ec-keyboard.dtsi>.
Changes in v6:
- Only include sc7180.dtsi in sc7180-trogdor.dtsi (19794489fa24).
- Simplify spi0/spi6 labeling (d277cab7afc7).
- Simplify trackpad enabling (51d30402be75).
- Accidentally deleted changes requested by Doug.
- Accidentally deleted changes requested by Doug.
- Remove mrbland patch.
- Copy changes to ap_sar_sensor from v5.4.
- Add #include of <arm/cros-ec-keyboard.dtsi>.
- Add #include of <arm/cros-ec-keyboard.dtsi> from v5.4.
Changes in v5:
- Replaced _ in node name with -
- Ordered nodes by name
- Remove extra newline
- Add comment that compatible will be filled in per-board
- Replace _ in node name with -
- Order nodes by name.
- Add comment that compatible will be filled in per-board.
Changes in v4:
- Cleaned up rt5682s files
- Restored camcc definition
- Added missing version history
- Add missing version history
- Add missing version history
- Fix description (no downstream bits removed).
- Add missing version history.
- Fix description (no downstream bits removed).
- Add missing version history.
Changes in v3:
- Removed camcc definition
- First inclusion in this series
- First inclusion in series.
Changes in v2:
- Word wrapped patch description.
- Removed "Author" from patch description.
- Fixed whitespace around "en_pp3300_dx_edp"
- Add word wrapping to patch description.
- Remove "Author" from patch description.
- Fix whitespace around "en_pp3300_dx_edp".
- First inclusion in series.
Joseph S. Barrera III (5):
arm64: dts: qcom: sc7180: Add wormdingler dts files
arm64: dts: qcom: sc7180: Add quackingstick dts files
arm64: dts: qcom: sc7180: Add mrbland dts files
arm64: dts: qcom: sc7180: Add pazquel dts files
arm64: dts: qcom: sc7180: Add kingoftown dts files
arch/arm64/boot/dts/qcom/Makefile | 18 +
.../dts/qcom/sc7180-trogdor-kingoftown-r0.dts | 43 ++
.../dts/qcom/sc7180-trogdor-kingoftown-r1.dts | 16 +
.../dts/qcom/sc7180-trogdor-kingoftown.dtsi | 224 ++++++++++
.../qcom/sc7180-trogdor-mrbland-rev0-auo.dts | 22 +
.../qcom/sc7180-trogdor-mrbland-rev0-boe.dts | 22 +
.../dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi | 53 +++
.../qcom/sc7180-trogdor-mrbland-rev1-auo.dts | 22 +
.../qcom/sc7180-trogdor-mrbland-rev1-boe.dts | 24 ++
.../boot/dts/qcom/sc7180-trogdor-mrbland.dtsi | 344 +++++++++++++++
.../sc7180-trogdor-pazquel-lte-parade.dts | 21 +
.../qcom/sc7180-trogdor-pazquel-lte-ti.dts | 21 +
.../qcom/sc7180-trogdor-pazquel-parade.dts | 16 +
.../dts/qcom/sc7180-trogdor-pazquel-ti.dts | 16 +
.../boot/dts/qcom/sc7180-trogdor-pazquel.dtsi | 221 ++++++++++
.../sc7180-trogdor-quackingstick-r0-lte.dts | 38 ++
.../qcom/sc7180-trogdor-quackingstick-r0.dts | 26 ++
.../qcom/sc7180-trogdor-quackingstick.dtsi | 318 ++++++++++++++
.../sc7180-trogdor-wormdingler-rev0-boe.dts | 22 +
.../sc7180-trogdor-wormdingler-rev0-inx.dts | 22 +
.../qcom/sc7180-trogdor-wormdingler-rev0.dtsi | 53 +++
...0-trogdor-wormdingler-rev1-boe-rt5682s.dts | 29 ++
.../sc7180-trogdor-wormdingler-rev1-boe.dts | 28 ++
...0-trogdor-wormdingler-rev1-inx-rt5682s.dts | 29 ++
.../sc7180-trogdor-wormdingler-rev1-inx.dts | 22 +
.../dts/qcom/sc7180-trogdor-wormdingler.dtsi | 408 ++++++++++++++++++
26 files changed, 2078 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
--
2.31.0
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v10 1/5] arm64: dts: qcom: sc7180: Add wormdingler dts files
2022-06-22 21:58 [PATCH v10 0/5] arm64: dts: qcom: sc7180: Add five new trogdor-based boards Joseph S. Barrera III
@ 2022-06-22 21:58 ` Joseph S. Barrera III
2022-06-22 21:58 ` [PATCH v10 2/5] arm64: dts: qcom: sc7180: Add quackingstick " Joseph S. Barrera III
` (4 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Joseph S. Barrera III @ 2022-06-22 21:58 UTC (permalink / raw)
To: LKML
Cc: Stephen Boyd, Douglas Anderson, Alexandru M Stan,
Joseph S. Barrera III, Andy Gross, Bjorn Andersson,
Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm
Wormdingler is a trogdor-based board, shipping to customers as the
Lenovo IdeaPad Chromebook Duet 3. These dts files are copies from
the downstream Chrome OS 5.4 kernel, but with the camera
(sc7180-trogdor-mipi-camera.dtsi) #include removed.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
---
(no changes since v7)
Changes in v7:
- Restore changes requested by Doug.
Changes in v6:
- Only include sc7180.dtsi in sc7180-trogdor.dtsi (19794489fa24).
- Simplify spi0/spi6 labeling (d277cab7afc7).
- Simplify trackpad enabling (51d30402be75).
- Accidentally deleted changes requested by Doug.
Changes in v5:
- Replaced _ in node name with -
- Ordered nodes by name
Changes in v4:
- Cleaned up rt5682s files
- Restored camcc definition
- Added missing version history
Changes in v3:
- Removed camcc definition
Changes in v2:
- Word wrapped patch description.
- Removed "Author" from patch description.
- Fixed whitespace around "en_pp3300_dx_edp"
arch/arm64/boot/dts/qcom/Makefile | 6 +
.../sc7180-trogdor-wormdingler-rev0-boe.dts | 22 +
.../sc7180-trogdor-wormdingler-rev0-inx.dts | 22 +
.../qcom/sc7180-trogdor-wormdingler-rev0.dtsi | 53 +++
...0-trogdor-wormdingler-rev1-boe-rt5682s.dts | 29 ++
.../sc7180-trogdor-wormdingler-rev1-boe.dts | 28 ++
...0-trogdor-wormdingler-rev1-inx-rt5682s.dts | 29 ++
.../sc7180-trogdor-wormdingler-rev1-inx.dts | 22 +
.../dts/qcom/sc7180-trogdor-wormdingler.dtsi | 408 ++++++++++++++++++
9 files changed, 619 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 2f8aec2cc6db..e4114e22548a 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -81,6 +81,12 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-inx.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts
new file mode 100644
index 000000000000..d6ed7d0afe4a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x10 => 16
+ * - bits 7..4: Panel ID: 0x1 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler-rev0.dtsi"
+
+/ {
+ model = "Google Wormdingler rev0 BOE panel board";
+ compatible = "google,wormdingler-rev0-sku16", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "boe,tv110c9m-ll3";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts
new file mode 100644
index 000000000000..c03525ea64ca
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x0 => 0
+ * - bits 7..4: Panel ID: 0x0 (INX)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler-rev0.dtsi"
+
+/ {
+ model = "Google Wormdingler rev0 INX panel board";
+ compatible = "google,wormdingler-rev0-sku0", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "innolux,hj110iz-01a";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi
new file mode 100644
index 000000000000..db29e0cba29d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler.dtsi"
+
+&avdd_lcd {
+ gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+};
+
+&panel {
+ enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
+};
+
+&v1p8_mipi {
+ gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor-wormdingler.dtsi */
+&avdd_lcd_en {
+ pinmux {
+ pins = "gpio80";
+ };
+
+ pinconf {
+ pins = "gpio80";
+ };
+};
+
+&mipi_1800_en {
+ pinmux {
+ pins = "gpio81";
+ };
+
+ pinconf {
+ pins = "gpio81";
+ };
+};
+&vdd_reset_1800 {
+ pinmux {
+ pins = "gpio76";
+ };
+
+ pinconf {
+ pins = "gpio76";
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
new file mode 100644
index 000000000000..aa605885c371
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x401 => 1025
+ * - bits 11..8: Panel ID: 0x4 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler-rev1-boe.dts"
+
+/ {
+ model = "Google Wormdingler rev1+ (BOE, rt5682s)";
+ compatible = "google,wormdingler-sku1025", "qcom,sc7180";
+};
+
+&alc5682 {
+ compatible = "realtek,rt5682s";
+ realtek,dmic1-clk-pin = <2>;
+ realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+&sound {
+ compatible = "google,sc7180-trogdor";
+ model = "sc7180-rt5682s-max98357a-1mic";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts
new file mode 100644
index 000000000000..c5b0658bd632
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x400 => 1024
+ * - bits 11..8: Panel ID: 0x4 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler.dtsi"
+
+/ {
+ model = "Google Wormdingler rev1+ BOE panel board";
+ compatible = "google,wormdingler-sku1024", "qcom,sc7180";
+};
+
+&dsi_phy {
+ qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>;
+ qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>;
+ qcom,phy-drive-ldo-level = <450>;
+};
+
+&panel {
+ compatible = "boe,tv110c9m-ll3";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
new file mode 100644
index 000000000000..7116c44c8d85
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x0001 => 1
+ * - bits 11..8: Panel ID: 0x0 (INX)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler-rev1-inx.dts"
+
+/ {
+ model = "Google Wormdingler rev1+ (INX, rt5682s)";
+ compatible = "google,wormdingler-sku1", "qcom,sc7180";
+};
+
+&alc5682 {
+ compatible = "realtek,rt5682s";
+ realtek,dmic1-clk-pin = <2>;
+ realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+&sound {
+ compatible = "google,sc7180-trogdor";
+ model = "sc7180-rt5682s-max98357a-1mic";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts
new file mode 100644
index 000000000000..dd34a2297ea0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x0000 => 0
+ * - bits 11..8: Panel ID: 0x0 (INX)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler.dtsi"
+
+/ {
+ model = "Google Wormdingler rev1+ INX panel board";
+ compatible = "google,wormdingler-sku0", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "innolux,hj110iz-01a";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
new file mode 100644
index 000000000000..701dd11a12cf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -0,0 +1,408 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+
+/ {
+ avdd_lcd: avdd-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd_lcd";
+
+ gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avdd_lcd_en>;
+
+ vin-supply = <&pp5000_a>;
+ };
+
+ avee_lcd: avee-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "avee_lcd";
+
+ gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avee_lcd_en>;
+
+ vin-supply = <&pp5000_a>;
+ };
+
+ pp1800_ts:
+ v1p8_mipi: v1p8-mipi {
+ compatible = "regulator-fixed";
+ regulator-name = "v1p8_mipi";
+
+ gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mipi_1800_en>;
+
+ vin-supply = <&pp3300_a>;
+ };
+
+ thermal-zones {
+ skin_temp_thermal: skin-temp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm6150_adc_tm 1>;
+ sustainable-power = <574>;
+
+ trips {
+ skin_temp_alert0: trip-point0 {
+ temperature = <58000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ skin_temp_alert1: trip-point1 {
+ temperature = <62500>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ skin-temp-crit {
+ temperature = <68000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&skin_temp_alert0>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&skin_temp_alert1>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+};
+
+&backlight {
+ pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+ status = "okay";
+};
+
+&cros_ec {
+ base_detection: cbas {
+ compatible = "google,cros-cbas";
+ };
+};
+
+&dsi0 {
+
+ panel: panel@0 {
+ reg = <0>;
+ enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_reset_1800>;
+ avdd-supply = <&avdd_lcd>;
+ avee-supply = <&avee_lcd>;
+ pp1800-supply = <&v1p8_mipi>;
+ pp3300-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ rotation = <270>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@1 {
+ compatible = "hid-over-i2c";
+ reg = <0x01>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+
+ post-power-on-delay-ms = <70>;
+ hid-descr-addr = <0x0001>;
+
+ vdd-supply = <&pp3300_ts>;
+ vddl-supply = <&pp1800_ts>;
+ };
+};
+
+&pm6150_adc {
+ skin-temp-thermistor@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm6150_adc_tm {
+ status = "okay";
+
+ skin-temp-thermistor@1 {
+ reg = <1>;
+ io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pp1800_uf_cam {
+ status = "okay";
+};
+
+&pp1800_wf_cam {
+ status = "okay";
+};
+
+&pp2800_uf_cam {
+ status = "okay";
+};
+
+&pp2800_wf_cam {
+ status = "okay";
+};
+
+&wifi {
+ qcom,ath10k-calibration-variant = "GO_WORMDINGLER";
+};
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+pp3300_disp_on: &pp3300_dx_edp {
+ gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+
+tp_en: &en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio85";
+ };
+
+ pinconf {
+ pins = "gpio85";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "HUB_RST_L",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "UF_CAM_EN",
+ "WF_CAM_EN",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "",
+ "",
+ "AP_EDP_BKLTEN",
+ "UF_CAM_MCLK",
+ "WF_CAM_CLK",
+ "",
+ "",
+ "UF_CAM_SDA",
+ "UF_CAM_SCL",
+ "WF_CAM_SDA",
+ "WF_CAM_SCL",
+ "AVEE_LCD_EN",
+ "",
+ "AMP_EN",
+ "",
+ "",
+ "",
+ "",
+ "HP_IRQ",
+ "WF_CAM_RST_L",
+ "UF_CAM_RST_L",
+ "AP_BRD_ID2",
+ "",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "BT_UART_CTS",
+ "BT_UART_RTS",
+ "BT_UART_TXD",
+ "BT_UART_RXD",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DIN",
+ "",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "",
+ "AP_SPI_CS0_L",
+ "",
+ "",
+ "",
+ "",
+ "WLAN_SW_CTRL",
+ "",
+ "REPORT_E",
+ "",
+ "ID0",
+ "",
+ "ID1",
+ "",
+ "",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "TP_EN",
+ "MIPI_1.8V_EN",
+ "VDD_RESET_1.8V",
+ "AVDD_LCD_EN",
+ "",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "SDM_GRFC_3",
+ "",
+ "",
+ "BOOT_CONFIG_4",
+ "BOOT_CONFIG_2",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "BOOT_CONFIG_3",
+ "WCI2_LTE_COEX_TXD",
+ "WCI2_LTE_COEX_RXD",
+ "",
+ "",
+ "",
+ "",
+ "FORCED_USB_BOOT_POL",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+
+ avdd_lcd_en: avdd-lcd-en {
+ pinmux {
+ pins = "gpio88";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio88";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ avee_lcd_en: avee-lcd-en {
+ pinmux {
+ pins = "gpio21";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio21";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ mipi_1800_en: mipi-1800-en {
+ pinmux {
+ pins = "gpio86";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio86";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ vdd_reset_1800: vdd-reset-1800 {
+ pinmux {
+ pins = "gpio87";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio87";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
--
2.31.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v10 2/5] arm64: dts: qcom: sc7180: Add quackingstick dts files
2022-06-22 21:58 [PATCH v10 0/5] arm64: dts: qcom: sc7180: Add five new trogdor-based boards Joseph S. Barrera III
2022-06-22 21:58 ` [PATCH v10 1/5] arm64: dts: qcom: sc7180: Add wormdingler dts files Joseph S. Barrera III
@ 2022-06-22 21:58 ` Joseph S. Barrera III
2022-06-22 21:58 ` [PATCH v10 3/5] arm64: dts: qcom: sc7180: Add mrbland " Joseph S. Barrera III
` (3 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Joseph S. Barrera III @ 2022-06-22 21:58 UTC (permalink / raw)
To: LKML
Cc: Stephen Boyd, Douglas Anderson, Alexandru M Stan,
Joseph S. Barrera III, Andy Gross, Bjorn Andersson,
Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm
Quackingstick is a trogdor-based board. These dts files are copies from
the downstream Chrome OS 5.4 kernel, but with downstream bits removed.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
---
(no changes since v8)
Changes in v8:
- Incorporate the deletion of the usb_c1 node from 9f9fb70a7294.
Changes in v7:
- Restore changes requested by Doug.
- Only include sc7180.dtsi in sc7180-trogdor.dtsi (19794489fa24).
- Simplify spi0/spi6 labeling (d277cab7afc7).
- Simplify trackpad enabling (51d30402be75).
Changes in v6:
- Accidentally deleted changes requested by Doug.
Changes in v5:
- Remove extra newline
- Add comment that compatible will be filled in per-board
Changes in v4:
- Add missing version history
Changes in v3:
- First inclusion in this series
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../sc7180-trogdor-quackingstick-r0-lte.dts | 38 +++
.../qcom/sc7180-trogdor-quackingstick-r0.dts | 26 ++
.../qcom/sc7180-trogdor-quackingstick.dtsi | 318 ++++++++++++++++++
4 files changed, 384 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index e4114e22548a..7268086f66e8 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -81,6 +81,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-boe.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-inx.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts
new file mode 100644
index 000000000000..35e8945fc56d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x600 => 1536
+ * - bits 11..8: Panel ID: 0x6 (AUO)
+ */
+
+#include "sc7180-trogdor-quackingstick-r0.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Quackingstick (rev0+) with LTE";
+ compatible = "google,quackingstick-sku1536", "qcom,sc7180";
+};
+
+&ap_sar_sensor {
+ compatible = "semtech,sx9324";
+ semtech,ph0-pin = <3 1 3>;
+ semtech,ph1-pin = <2 1 2>;
+ semtech,ph2-pin = <3 3 1>;
+ semtech,ph3-pin = <1 3 3>;
+ semtech,ph01-resolution = <1024>;
+ semtech,ph23-resolution = <1024>;
+ semtech,startup-sensor = <1>;
+ semtech,ph01-proxraw-strength = <3>;
+ semtech,ph23-proxraw-strength = <3>;
+ semtech,avg-pos-strength = <256>;
+
+ /delete-property/ svdd-supply;
+ vdd-supply = <&pp1800_prox>;
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts
new file mode 100644
index 000000000000..5c81e44ed4a5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x601 => 1537
+ * - bits 11..8: Panel ID: 0x6 (AUO)
+ */
+
+#include "sc7180-trogdor-quackingstick.dtsi"
+
+/ {
+ model = "Google Quackingstick (rev0+)";
+ compatible = "google,quackingstick-sku1537", "qcom,sc7180";
+};
+
+&dsi_phy {
+ qcom,phy-rescode-offset-top = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>;
+ qcom,phy-rescode-offset-bot = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>;
+ qcom,phy-drive-ldo-level = <375>;
+};
+
+&panel {
+ compatible = "auo,b101uan08.3";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
new file mode 100644
index 000000000000..574b78eb4f28
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+
+/* This board only has 1 USB Type-C port. */
+/delete-node/ &usb_c1;
+
+/ {
+ ppvar_lcd: ppvar-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "ppvar_lcd";
+
+ gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ppvar_lcd_en>;
+
+ vin-supply = <&pp5000_a>;
+ };
+
+ v1p8_disp: v1p8-disp {
+ compatible = "regulator-fixed";
+ regulator-name = "v1p8_disp";
+
+ gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp1800_disp_on>;
+
+ vin-supply = <&pp3300_a>;
+ };
+};
+
+&backlight {
+ pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+ status = "okay";
+};
+
+&dsi0 {
+ panel: panel@0 {
+ /* Compatible will be filled in per-board */
+ reg = <0>;
+ enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rst>;
+ avdd-supply = <&ppvar_lcd>;
+ pp1800-supply = <&v1p8_disp>;
+ pp3300-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ rotation = <270>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&gpio_keys {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ post-power-on-delay-ms = <20>;
+ hid-descr-addr = <0x0001>;
+
+ vdd-supply = <&pp3300_ts>;
+ };
+};
+
+&sdhc_2 {
+ status = "okay";
+};
+
+&pp1800_uf_cam {
+ status = "okay";
+};
+
+&pp1800_wf_cam {
+ status = "okay";
+};
+
+&pp2800_uf_cam {
+ status = "okay";
+};
+
+&pp2800_wf_cam {
+ status = "okay";
+};
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+pp3300_disp_on: &pp3300_dx_edp {
+ gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+
+tp_en: &en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio67";
+ };
+
+ pinconf {
+ pins = "gpio67";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "HUB_RST_L",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "UF_CAM_EN",
+ "WF_CAM_EN",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "",
+ "",
+ "AP_EDP_BKLTEN",
+ "UF_CAM_MCLK",
+ "WF_CAM_CLK",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "UF_CAM_SDA",
+ "UF_CAM_SCL",
+ "WF_CAM_SDA",
+ "WF_CAM_SCL",
+ "",
+ "",
+ "AMP_EN",
+ "P_SENSOR_INT_L",
+ "AP_SAR_SENSOR_SDA",
+ "AP_SAR_SENSOR_SCL",
+ "",
+ "HP_IRQ",
+ "WF_CAM_RST_L",
+ "UF_CAM_RST_L",
+ "AP_BRD_ID2",
+ "",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "",
+ "",
+ "",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "",
+ "",
+ "AMP_DIN",
+ "PEN_DET_ODL",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "EN_PP3300_DX_EDP",
+ "AP_SPI_CS0_L",
+ "SD_CD_ODL",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT_L",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "",
+ "PP1800_DISP_ON",
+ "LCD_RST",
+ "PPVAR_LCD_EN",
+ "",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_TS_I2C_SDA",
+ "AP_TS_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+
+ lcd_rst: lcd-rst {
+ pinmux {
+ pins = "gpio87";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio87";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ ppvar_lcd_en: ppvar-lcd-en {
+ pinmux {
+ pins = "gpio88";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio88";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ pp1800_disp_on: pp1800-disp-on {
+ pinmux {
+ pins = "gpio86";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio86";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
--
2.31.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v10 3/5] arm64: dts: qcom: sc7180: Add mrbland dts files
2022-06-22 21:58 [PATCH v10 0/5] arm64: dts: qcom: sc7180: Add five new trogdor-based boards Joseph S. Barrera III
2022-06-22 21:58 ` [PATCH v10 1/5] arm64: dts: qcom: sc7180: Add wormdingler dts files Joseph S. Barrera III
2022-06-22 21:58 ` [PATCH v10 2/5] arm64: dts: qcom: sc7180: Add quackingstick " Joseph S. Barrera III
@ 2022-06-22 21:58 ` Joseph S. Barrera III
2022-06-22 21:58 ` [PATCH v10 4/5] arm64: dts: qcom: sc7180: Add pazquel " Joseph S. Barrera III
` (2 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Joseph S. Barrera III @ 2022-06-22 21:58 UTC (permalink / raw)
To: LKML
Cc: Stephen Boyd, Douglas Anderson, Alexandru M Stan,
Joseph S. Barrera III, Andy Gross, Bjorn Andersson,
Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm
Mrbland is a trogdor-based board. These dts files are copies from
the downstream Chrome OS 5.4 kernel, but with downstream bits removed.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
---
(no changes since v7)
Changes in v7:
- Restore mrbland patch.
- Only include sc7180.dtsi in sc7180-trogdor.dtsi (19794489fa24).
- Simplify spi0/spi6 labeling (d277cab7afc7).
- Simplify trackpad enabling (51d30402be75).
Changes in v6:
- Remove mrbland patch.
Changes in v5:
- Replace _ in node name with -
- Order nodes by name.
- Add comment that compatible will be filled in per-board.
Changes in v4:
- Add missing version history
Changes in v2:
- Add word wrapping to patch description.
- Remove "Author" from patch description.
- Fix whitespace around "en_pp3300_dx_edp".
arch/arm64/boot/dts/qcom/Makefile | 4 +
.../qcom/sc7180-trogdor-mrbland-rev0-auo.dts | 22 ++
.../qcom/sc7180-trogdor-mrbland-rev0-boe.dts | 22 ++
.../dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi | 53 +++
.../qcom/sc7180-trogdor-mrbland-rev1-auo.dts | 22 ++
.../qcom/sc7180-trogdor-mrbland-rev1-boe.dts | 24 ++
.../boot/dts/qcom/sc7180-trogdor-mrbland.dtsi | 344 ++++++++++++++++++
7 files changed, 491 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 7268086f66e8..5cfd6316768c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -75,6 +75,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r9.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r5.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r9.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-auo.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-auo.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-boe.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts
new file mode 100644
index 000000000000..2767817fb053
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x0 => 0
+ * - bits 7..4: Panel ID: 0x0 (AUO)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-mrbland-rev0.dtsi"
+
+/ {
+ model = "Google Mrbland rev0 AUO panel board";
+ compatible = "google,mrbland-rev0-sku0", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "auo,b101uan08.3";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts
new file mode 100644
index 000000000000..711485574a03
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x10 => 16
+ * - bits 7..4: Panel ID: 0x1 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-mrbland-rev0.dtsi"
+
+/ {
+ model = "Google Mrbland rev0 BOE panel board";
+ compatible = "google,mrbland-rev0-sku16", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "boe,tv101wum-n53";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi
new file mode 100644
index 000000000000..7bc8402c018e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-mrbland.dtsi"
+
+&avdd_lcd {
+ gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+};
+
+&panel {
+ enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
+};
+
+&v1p8_mipi {
+ gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor-mrbland.dtsi */
+&avdd_lcd_en {
+ pinmux {
+ pins = "gpio80";
+ };
+
+ pinconf {
+ pins = "gpio80";
+ };
+};
+
+&mipi_1800_en {
+ pinmux {
+ pins = "gpio81";
+ };
+
+ pinconf {
+ pins = "gpio81";
+ };
+};
+&vdd_reset_1800 {
+ pinmux {
+ pins = "gpio76";
+ };
+
+ pinconf {
+ pins = "gpio76";
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts
new file mode 100644
index 000000000000..275313ef7554
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x600 => 1536
+ * - bits 11..8: Panel ID: 0x6 (AUO)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-mrbland.dtsi"
+
+/ {
+ model = "Google Mrbland rev1+ AUO panel board";
+ compatible = "google,mrbland-sku1536", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "auo,b101uan08.3";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts
new file mode 100644
index 000000000000..87c6b6c30b5e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x300 => 768
+ * - bits 11..8: Panel ID: 0x3 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-mrbland.dtsi"
+
+/ {
+ model = "Google Mrbland (rev1 - 2) BOE panel board";
+ /* Uses ID 768 on rev1 and 1024 on rev2+ */
+ compatible = "google,mrbland-sku1024", "google,mrbland-sku768",
+ "qcom,sc7180";
+};
+
+&panel {
+ compatible = "boe,tv101wum-n53";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi
new file mode 100644
index 000000000000..33d1d8a29038
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+
+/* This board only has 1 USB Type-C port. */
+/delete-node/ &usb_c1;
+
+/ {
+ avdd_lcd: avdd-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd_lcd";
+
+ gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avdd_lcd_en>;
+
+ vin-supply = <&pp5000_a>;
+ };
+
+ avee_lcd: avee-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "avee_lcd";
+
+ gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avee_lcd_en>;
+
+ vin-supply = <&pp5000_a>;
+ };
+
+ v1p8_mipi: v1p8-mipi {
+ compatible = "regulator-fixed";
+ regulator-name = "v1p8_mipi";
+
+ gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mipi_1800_en>;
+
+ vin-supply = <&pp3300_a>;
+ };
+};
+
+&backlight {
+ pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+ status = "okay";
+};
+
+&dsi0 {
+
+ panel: panel@0 {
+ /* Compatible will be filled in per-board */
+ reg = <0>;
+ enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_reset_1800>;
+ avdd-supply = <&avdd_lcd>;
+ avee-supply = <&avee_lcd>;
+ pp1800-supply = <&v1p8_mipi>;
+ pp3300-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ rotation = <270>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&gpio_keys {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@5d {
+ compatible = "goodix,gt7375p";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+
+ vdd-supply = <&pp3300_ts>;
+ };
+};
+
+&pp1800_uf_cam {
+ status = "okay";
+};
+
+&pp1800_wf_cam {
+ status = "okay";
+};
+
+&pp2800_uf_cam {
+ status = "okay";
+};
+
+&pp2800_wf_cam {
+ status = "okay";
+};
+
+&wifi {
+ qcom,ath10k-calibration-variant = "GO_MRBLAND";
+};
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+pp3300_disp_on: &pp3300_dx_edp {
+ gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+
+tp_en: &en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio85";
+ };
+
+ pinconf {
+ pins = "gpio85";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "HUB_RST_L",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "UF_CAM_EN",
+ "WF_CAM_EN",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "",
+ "",
+ "AP_EDP_BKLTEN",
+ "UF_CAM_MCLK",
+ "WF_CAM_CLK",
+ "",
+ "",
+ "UF_CAM_SDA",
+ "UF_CAM_SCL",
+ "WF_CAM_SDA",
+ "WF_CAM_SCL",
+ "AVEE_LCD_EN",
+ "",
+ "AMP_EN",
+ "",
+ "",
+ "",
+ "",
+ "HP_IRQ",
+ "WF_CAM_RST_L",
+ "UF_CAM_RST_L",
+ "AP_BRD_ID2",
+ "",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "BT_UART_CTS",
+ "BT_UART_RTS",
+ "BT_UART_TXD",
+ "BT_UART_RXD",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DIN",
+ "PEN_DET_ODL",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "",
+ "AP_SPI_CS0_L",
+ "",
+ "",
+ "",
+ "",
+ "WLAN_SW_CTRL",
+ "",
+ "REPORT_E",
+ "",
+ "ID0",
+ "",
+ "ID1",
+ "",
+ "",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "TP_EN",
+ "MIPI_1.8V_EN",
+ "VDD_RESET_1.8V",
+ "AVDD_LCD_EN",
+ "",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "SDM_GRFC_3",
+ "",
+ "",
+ "BOOT_CONFIG_4",
+ "BOOT_CONFIG_2",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "BOOT_CONFIG_3",
+ "WCI2_LTE_COEX_TXD",
+ "WCI2_LTE_COEX_RXD",
+ "",
+ "",
+ "",
+ "",
+ "FORCED_USB_BOOT_POL",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+
+ avdd_lcd_en: avdd-lcd-en {
+ pinmux {
+ pins = "gpio88";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio88";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ avee_lcd_en: avee-lcd-en {
+ pinmux {
+ pins = "gpio21";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio21";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ mipi_1800_en: mipi-1800-en {
+ pinmux {
+ pins = "gpio86";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio86";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ vdd_reset_1800: vdd-reset-1800 {
+ pinmux {
+ pins = "gpio87";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio87";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
--
2.31.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v10 4/5] arm64: dts: qcom: sc7180: Add pazquel dts files
2022-06-22 21:58 [PATCH v10 0/5] arm64: dts: qcom: sc7180: Add five new trogdor-based boards Joseph S. Barrera III
` (2 preceding siblings ...)
2022-06-22 21:58 ` [PATCH v10 3/5] arm64: dts: qcom: sc7180: Add mrbland " Joseph S. Barrera III
@ 2022-06-22 21:58 ` Joseph S. Barrera III
2022-06-22 23:27 ` Doug Anderson
2022-06-22 21:58 ` [PATCH v10 5/5] arm64: dts: qcom: sc7180: Add kingoftown " Joseph S. Barrera III
2022-06-22 23:07 ` [PATCH v10 0/5] arm64: dts: qcom: sc7180: Add five new trogdor-based boards Stephen Boyd
5 siblings, 1 reply; 8+ messages in thread
From: Joseph S. Barrera III @ 2022-06-22 21:58 UTC (permalink / raw)
To: LKML
Cc: Stephen Boyd, Douglas Anderson, Alexandru M Stan,
Joseph S. Barrera III, Andy Gross, Bjorn Andersson,
Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm
Pazquel is a trogdor-based board. These dts files are unchanged copies
from the downstream Chrome OS 5.4 kernel.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
---
Changes in v10:
- Remove 'include sc7180.dtsi' from *all* sc7180-trogdor-pazquel* files.
- Move "okay" for ap_tp_i2c to proper location.
Changes in v9:
- Restore two lines accidentally removed from ap_sar_sensor.
- Simplify trackpad enabling (51d30402be75).
Changes in v7:
- Only include sc7180.dtsi in sc7180-trogdor.dtsi (19794489fa24).
- Simplify spi0/spi6 labeling (d277cab7afc7).
- Remove #include of <arm/cros-ec-keyboard.dtsi>.
- Accidentally removed two lines from ap_sar_sensor.
Changes in v6:
- Copy changes to ap_sar_sensor from v5.4.
- Add #include of <arm/cros-ec-keyboard.dtsi>.
Changes in v4:
- Fix description (no downstream bits removed).
- Add missing version history.
Changes in v3:
- First inclusion in series.
arch/arm64/boot/dts/qcom/Makefile | 4 +
.../sc7180-trogdor-pazquel-lte-parade.dts | 21 ++
.../qcom/sc7180-trogdor-pazquel-lte-ti.dts | 21 ++
.../qcom/sc7180-trogdor-pazquel-parade.dts | 16 ++
.../dts/qcom/sc7180-trogdor-pazquel-ti.dts | 16 ++
.../boot/dts/qcom/sc7180-trogdor-pazquel.dtsi | 221 ++++++++++++++++++
6 files changed, 299 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5cfd6316768c..dc26704dfe34 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -79,6 +79,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-auo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-boe.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-auo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-ti.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
new file mode 100644
index 000000000000..407adca19652
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Pazquel (Parade,LTE)";
+ compatible = "google,pazquel-sku4", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts
new file mode 100644
index 000000000000..857877cf1565
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Pazquel (TI,LTE)";
+ compatible = "google,pazquel-sku0", "google,pazquel-sku2", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts
new file mode 100644
index 000000000000..f28c6c7f522c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+
+/ {
+ model = "Google Pazquel (Parade)";
+ compatible = "google,pazquel-sku5", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts
new file mode 100644
index 000000000000..9f950f596fa1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+
+/ {
+ model = "Google Pazquel (TI)";
+ compatible = "google,pazquel-sku1", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
new file mode 100644
index 000000000000..5e4731b24d34
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include "sc7180-trogdor.dtsi"
+
+&ap_sar_sensor {
+ compatible = "semtech,sx9324";
+ semtech,ph0-pin = <1 3 3>;
+ semtech,ph1-pin = <3 1 3>;
+ semtech,ph2-pin = <1 3 3>;
+ semtech,ph3-pin = <0 0 0>;
+ semtech,ph01-resolution = <1024>;
+ semtech,ph23-resolution = <1024>;
+ semtech,startup-sensor = <1>;
+ semtech,ph01-proxraw-strength = <3>;
+ semtech,ph23-proxraw-strength = <1>;
+ semtech,avg-pos-strength = <128>;
+ semtech,input-analog-gain = <0>;
+ semtech,cs-idle-sleep = "gnd";
+
+ /delete-property/ svdd-supply;
+ vdd-supply = <&pp1800_prox>;
+};
+
+/delete-node/&trackpad;
+&ap_tp_i2c {
+ status = "okay";
+ trackpad: trackpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tp_int_odl>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+ vcc-supply = <&pp3300_fp_tp>;
+ post-power-on-delay-ms = <100>;
+ hid-descr-addr = <0x0001>;
+
+ wakeup-source;
+ };
+};
+
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
+
+&panel {
+ compatible = "edp-panel";
+};
+
+&pp3300_dx_edp {
+ gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+&en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio67";
+ };
+
+ pinconf {
+ pins = "gpio67";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "TP_INT_ODL",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "AP_TP_I2C_SDA",
+ "AP_TP_I2C_SCL",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "",
+ "EDP_BRIJ_IRQ",
+ "AP_EDP_BKLTEN",
+ "",
+ "",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "HUB_RST_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AMP_EN",
+ "P_SENSOR_INT_L",
+ "AP_SAR_SENSOR_SDA",
+ "AP_SAR_SENSOR_SCL",
+ "",
+ "HP_IRQ",
+ "",
+ "",
+ "AP_BRD_ID2",
+ "BRIJ_SUSPEND",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "",
+ "",
+ "",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DIN",
+ "",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "EN_PP3300_DX_EDP",
+ "AP_SPI_CS0_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "EDP_BRIJ_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+};
--
2.31.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v10 5/5] arm64: dts: qcom: sc7180: Add kingoftown dts files
2022-06-22 21:58 [PATCH v10 0/5] arm64: dts: qcom: sc7180: Add five new trogdor-based boards Joseph S. Barrera III
` (3 preceding siblings ...)
2022-06-22 21:58 ` [PATCH v10 4/5] arm64: dts: qcom: sc7180: Add pazquel " Joseph S. Barrera III
@ 2022-06-22 21:58 ` Joseph S. Barrera III
2022-06-22 23:07 ` [PATCH v10 0/5] arm64: dts: qcom: sc7180: Add five new trogdor-based boards Stephen Boyd
5 siblings, 0 replies; 8+ messages in thread
From: Joseph S. Barrera III @ 2022-06-22 21:58 UTC (permalink / raw)
To: LKML
Cc: Stephen Boyd, Douglas Anderson, Alexandru M Stan,
Joseph S. Barrera III, Andy Gross, Bjorn Andersson,
Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm
Kingoftown is a trogdor-based board. These dts files are unchanged copies
from the downstream Chrome OS 5.4 kernel.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
---
Changes in v10:
- Remove 'include sc7180.dtsi' from *all* sc7180-trogdor-kingoftown* files.
Changes in v9:
- Simplify trackpad enabling (51d30402be75).
Changes in v7:
- Simplify spi0/spi6 labeling (d277cab7afc7).
- Remove #include of <arm/cros-ec-keyboard.dtsi>.
Changes in v6:
- Add #include of <arm/cros-ec-keyboard.dtsi> from v5.4.
Changes in v4:
- Fix description (no downstream bits removed).
- Add missing version history.
Changes in v2:
- First inclusion in series.
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../dts/qcom/sc7180-trogdor-kingoftown-r0.dts | 43 ++++
.../dts/qcom/sc7180-trogdor-kingoftown-r1.dts | 16 ++
.../dts/qcom/sc7180-trogdor-kingoftown.dtsi | 224 ++++++++++++++++++
4 files changed, 285 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index dc26704dfe34..a9f2ad013179 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -60,6 +60,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r4.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts
new file mode 100644
index 000000000000..d9ee042a16d9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Kingoftown board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-kingoftown.dtsi"
+
+/ {
+ model = "Google Kingoftown (rev0)";
+ compatible = "google,kingoftown-rev0", "qcom,sc7180";
+};
+
+/*
+ * In rev1+, the enable pin of pp3300_fp_tp will be tied to pp1800_l10a
+ * power rail instead, since kingoftown does not have FP.
+ */
+&pp3300_fp_tp {
+ gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_fp_rails>;
+};
+
+&tlmm {
+ en_fp_rails: en-fp-rails {
+ pinmux {
+ pins = "gpio74";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio74";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts
new file mode 100644
index 000000000000..4c178696dd8f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Kingoftown board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-kingoftown.dtsi"
+
+/ {
+ model = "Google Kingoftown (rev1+)";
+ compatible = "google,kingoftown", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi
new file mode 100644
index 000000000000..2268f3e7b5f2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Kingoftown board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+&alc5682 {
+ compatible = "realtek,rt5682s";
+ realtek,dmic1-clk-pin = <2>;
+ realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+&ap_tp_i2c {
+ status = "okay";
+};
+
+ap_ts_pen_1v8: &i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@10 {
+ compatible = "elan,ekth3500";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc33-supply = <&pp3300_ts>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
+
+&panel {
+ compatible = "edp-panel";
+};
+
+&pp3300_dx_edp {
+ gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+&sound {
+ compatible = "google,sc7180-trogdor";
+ model = "sc7180-rt5682s-max98357a-1mic";
+};
+
+&wifi {
+ qcom,ath10k-calibration-variant = "GO_KINGOFTOWN";
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio67";
+ };
+
+ pinconf {
+ pins = "gpio67";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "TP_INT_L", /* 0 */
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "AP_TP_I2C_SDA",
+ "AP_TP_I2C_SCL",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "", /* 10 */
+ "EDP_BRIJ_IRQ",
+ "AP_EDP_BKLTEN",
+ "",
+ "",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "HUB_RST_L",
+ "",
+ "",
+ "", /* 20 */
+ "",
+ "",
+ "AMP_EN",
+ "",
+ "",
+ "",
+ "",
+ "HP_IRQ",
+ "",
+ "", /* 30 */
+ "AP_BRD_ID2",
+ "BRIJ_SUSPEND",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "BT_UART_CTS",
+ "BT_UART_RTS",
+ "BT_UART_TXD", /* 40 */
+ "BT_UART_RXD",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK", /* 50 */
+ "AMP_DIN",
+ "",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI", /* 60 */
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "EN_PP3300_DX_EDP",
+ "AP_SPI_CS0_L",
+ "",
+ "", /* 70 */
+ "",
+ "",
+ "",
+ "EN_FP_RAILS",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT_L",
+ "UIM1_DATA",
+ "UIM1_CLK", /* 80 */
+ "UIM1_RST",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_SKU_ID1", /* 90 */
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 100 */
+ "",
+ "",
+ "",
+ "EDP_BRIJ_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 110 */
+ "",
+ "",
+ "",
+ "",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+};
--
2.31.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v10 0/5] arm64: dts: qcom: sc7180: Add five new trogdor-based boards
2022-06-22 21:58 [PATCH v10 0/5] arm64: dts: qcom: sc7180: Add five new trogdor-based boards Joseph S. Barrera III
` (4 preceding siblings ...)
2022-06-22 21:58 ` [PATCH v10 5/5] arm64: dts: qcom: sc7180: Add kingoftown " Joseph S. Barrera III
@ 2022-06-22 23:07 ` Stephen Boyd
5 siblings, 0 replies; 8+ messages in thread
From: Stephen Boyd @ 2022-06-22 23:07 UTC (permalink / raw)
To: Joseph S. Barrera III, LKML
Cc: Douglas Anderson, Alexandru M Stan, Andy Gross, Bjorn Andersson,
Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm
Quoting Joseph S. Barrera III (2022-06-22 14:58:00)
> This series adds five new trogdor-based boards to upstream.
> The patches should be applied *after* applying
> https://lore.kernel.org/all/20220602190621.1646679-1-swboyd@chromium.org/
> (arm64: dts: qcom: Remove duplicate sc7180-trogdor include on lazor/homestar)
>
> The patches do *not* expect
> https://lore.kernel.org/all/20220518172525.3319993-1-swboyd@chromium.org/
> (sc7180-trogdor: Split out keyboard node and describe detachables)
> to be applied.
Sounds fine to me. I'll pull in this series and rebase my patch atop.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v10 4/5] arm64: dts: qcom: sc7180: Add pazquel dts files
2022-06-22 21:58 ` [PATCH v10 4/5] arm64: dts: qcom: sc7180: Add pazquel " Joseph S. Barrera III
@ 2022-06-22 23:27 ` Doug Anderson
0 siblings, 0 replies; 8+ messages in thread
From: Doug Anderson @ 2022-06-22 23:27 UTC (permalink / raw)
To: Joseph S. Barrera III
Cc: LKML, Stephen Boyd, Alexandru M Stan, Andy Gross,
Bjorn Andersson, Krzysztof Kozlowski, Rob Herring,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-msm
Hi,
On Wed, Jun 22, 2022 at 2:59 PM Joseph S. Barrera III
<joebar@chromium.org> wrote:
>
> Pazquel is a trogdor-based board. These dts files are unchanged copies
> from the downstream Chrome OS 5.4 kernel.
>
> Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
> ---
>
> Changes in v10:
> - Remove 'include sc7180.dtsi' from *all* sc7180-trogdor-pazquel* files.
> - Move "okay" for ap_tp_i2c to proper location.
>
> Changes in v9:
> - Restore two lines accidentally removed from ap_sar_sensor.
> - Simplify trackpad enabling (51d30402be75).
>
> Changes in v7:
> - Only include sc7180.dtsi in sc7180-trogdor.dtsi (19794489fa24).
> - Simplify spi0/spi6 labeling (d277cab7afc7).
> - Remove #include of <arm/cros-ec-keyboard.dtsi>.
> - Accidentally removed two lines from ap_sar_sensor.
>
> Changes in v6:
> - Copy changes to ap_sar_sensor from v5.4.
> - Add #include of <arm/cros-ec-keyboard.dtsi>.
>
> Changes in v4:
> - Fix description (no downstream bits removed).
> - Add missing version history.
>
> Changes in v3:
> - First inclusion in series.
>
> arch/arm64/boot/dts/qcom/Makefile | 4 +
> .../sc7180-trogdor-pazquel-lte-parade.dts | 21 ++
> .../qcom/sc7180-trogdor-pazquel-lte-ti.dts | 21 ++
> .../qcom/sc7180-trogdor-pazquel-parade.dts | 16 ++
> .../dts/qcom/sc7180-trogdor-pazquel-ti.dts | 16 ++
> .../boot/dts/qcom/sc7180-trogdor-pazquel.dtsi | 221 ++++++++++++++++++
> 6 files changed, 299 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 5cfd6316768c..dc26704dfe34 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -79,6 +79,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-auo.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-boe.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-auo.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-boe.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-ti.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
> new file mode 100644
> index 000000000000..407adca19652
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
> @@ -0,0 +1,21 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Pazquel board device tree source
> + *
> + * Copyright 2021 Google LLC.
> + */
> +
> +/dts-v1/;
> +
> +#include "sc7180-trogdor-parade-ps8640.dtsi"
> +#include "sc7180-trogdor-pazquel.dtsi"
> +#include "sc7180-trogdor-lte-sku.dtsi"
The includes are still not correct as far as I can tell. If you look
at Stephen's solution in "Simplify!" plus his fixup that your series
is based on, AKA ("arm64: dts: qcom: Remove duplicate sc7180-trogdor
include on lazor/homestar") then I believe the correct thing to do
here is:
1. Go back to v9
2. Remove the include of "sc7180-trogdor.dtsi" from the pazquel and
kingoftown .dtsi files.
3. Every place in pazquel and kingoftown that has an include of
"sc7180.dtsi" replace that with "sc7180-trogdor.dtsi"
I'm curious: did you try compiling your patches? Do they work? They
don't seem to for me. It's expected that when you post patches that
you have, at the very least, compile tested them. Given how much of
trogdor works upstream I'd also expect you to have actually boot
tested as many of the boards that you have hardware for.
-Doug
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2022-06-22 23:28 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-06-22 21:58 [PATCH v10 0/5] arm64: dts: qcom: sc7180: Add five new trogdor-based boards Joseph S. Barrera III
2022-06-22 21:58 ` [PATCH v10 1/5] arm64: dts: qcom: sc7180: Add wormdingler dts files Joseph S. Barrera III
2022-06-22 21:58 ` [PATCH v10 2/5] arm64: dts: qcom: sc7180: Add quackingstick " Joseph S. Barrera III
2022-06-22 21:58 ` [PATCH v10 3/5] arm64: dts: qcom: sc7180: Add mrbland " Joseph S. Barrera III
2022-06-22 21:58 ` [PATCH v10 4/5] arm64: dts: qcom: sc7180: Add pazquel " Joseph S. Barrera III
2022-06-22 23:27 ` Doug Anderson
2022-06-22 21:58 ` [PATCH v10 5/5] arm64: dts: qcom: sc7180: Add kingoftown " Joseph S. Barrera III
2022-06-22 23:07 ` [PATCH v10 0/5] arm64: dts: qcom: sc7180: Add five new trogdor-based boards Stephen Boyd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).