* [PATCH] arm64: dts: qcom: sdm845-mtp: Add Truly display
@ 2019-05-13 21:07 Bjorn Andersson
2019-06-05 5:26 ` Vivek Gautam
0 siblings, 1 reply; 2+ messages in thread
From: Bjorn Andersson @ 2019-05-13 21:07 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, devicetree, linux-kernel
Bring in the Truly display and enable the DSI channels to make the
mdss/gpu probe, even though we're lacking LABIB, preventing us from
seeing anything on the screen.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 79 +++++++++++++++++++++++++
1 file changed, 79 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 02b8357c8ce8..83198a19ff57 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -352,6 +352,77 @@
status = "okay";
};
+&dsi0 {
+ status = "okay";
+ vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+ qcom,dual-dsi-mode;
+ qcom,master-dsi;
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&truly_in_0>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+
+ panel@0 {
+ compatible = "truly,nt35597-2K-display";
+ reg = <0>;
+ vdda-supply = <&vreg_l14a_1p88>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+ mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ truly_in_0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ truly_in_1: endpoint {
+ remote-endpoint = <&dsi1_out>;
+ };
+ };
+ };
+ };
+};
+
+&dsi0_phy {
+ status = "okay";
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+&dsi1 {
+ status = "okay";
+ vdda-supply = <&vdda_mipi_dsi1_1p2>;
+
+ qcom,dual-dsi-mode;
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&truly_in_1>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&dsi1_phy {
+ status = "okay";
+ vdds-supply = <&vdda_mipi_dsi1_pll>;
+};
+
&gcc {
protected-clocks = <GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
@@ -365,6 +436,14 @@
clock-frequency = <400000>;
};
+&mdss {
+ status = "okay";
+};
+
+&mdss_mdp {
+ status = "okay";
+};
+
&qupv3_id_1 {
status = "okay";
};
--
2.18.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] arm64: dts: qcom: sdm845-mtp: Add Truly display
2019-05-13 21:07 [PATCH] arm64: dts: qcom: sdm845-mtp: Add Truly display Bjorn Andersson
@ 2019-06-05 5:26 ` Vivek Gautam
0 siblings, 0 replies; 2+ messages in thread
From: Vivek Gautam @ 2019-06-05 5:26 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andy Gross, David Brown, Rob Herring, Mark Rutland,
linux-arm-msm,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On Tue, May 14, 2019 at 2:39 AM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> Bring in the Truly display and enable the DSI channels to make the
> mdss/gpu probe, even though we're lacking LABIB, preventing us from
> seeing anything on the screen.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
Looks good to me and work well too with a wip lab-ibb driver change.
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 79 +++++++++++++++++++++++++
> 1 file changed, 79 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> index 02b8357c8ce8..83198a19ff57 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> @@ -352,6 +352,77 @@
> status = "okay";
> };
>
> +&dsi0 {
> + status = "okay";
> + vdda-supply = <&vdda_mipi_dsi0_1p2>;
> +
> + qcom,dual-dsi-mode;
> + qcom,master-dsi;
> +
> + ports {
> + port@1 {
> + endpoint {
> + remote-endpoint = <&truly_in_0>;
> + data-lanes = <0 1 2 3>;
> + };
> + };
> + };
> +
> + panel@0 {
> + compatible = "truly,nt35597-2K-display";
> + reg = <0>;
> + vdda-supply = <&vreg_l14a_1p88>;
> +
> + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
> + mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + truly_in_0: endpoint {
> + remote-endpoint = <&dsi0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + truly_in_1: endpoint {
> + remote-endpoint = <&dsi1_out>;
> + };
> + };
> + };
> + };
> +};
> +
> +&dsi0_phy {
> + status = "okay";
> + vdds-supply = <&vdda_mipi_dsi0_pll>;
> +};
> +
> +&dsi1 {
> + status = "okay";
> + vdda-supply = <&vdda_mipi_dsi1_1p2>;
> +
> + qcom,dual-dsi-mode;
> +
> + ports {
> + port@1 {
> + endpoint {
> + remote-endpoint = <&truly_in_1>;
> + data-lanes = <0 1 2 3>;
> + };
> + };
> + };
> +};
> +
> +&dsi1_phy {
> + status = "okay";
> + vdds-supply = <&vdda_mipi_dsi1_pll>;
> +};
> +
> &gcc {
> protected-clocks = <GCC_QSPI_CORE_CLK>,
> <GCC_QSPI_CORE_CLK_SRC>,
> @@ -365,6 +436,14 @@
> clock-frequency = <400000>;
> };
>
> +&mdss {
> + status = "okay";
> +};
> +
> +&mdss_mdp {
> + status = "okay";
> +};
> +
> &qupv3_id_1 {
> status = "okay";
> };
> --
> 2.18.0
>
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-06-05 5:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-13 21:07 [PATCH] arm64: dts: qcom: sdm845-mtp: Add Truly display Bjorn Andersson
2019-06-05 5:26 ` Vivek Gautam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).