* [RESEND x2][PATCH v2] phy: qcom-qusb2: Re add "qcom,sdm845-qusb2-phy" compat string
@ 2020-04-21 4:18 John Stultz
2020-04-24 4:05 ` John Stultz
0 siblings, 1 reply; 4+ messages in thread
From: John Stultz @ 2020-04-21 4:18 UTC (permalink / raw)
To: lkml
Cc: John Stultz, Andy Gross, Bjorn Andersson, Rob Herring,
Mark Rutland, Doug Anderson, Manu Gautam, Sandeep Maheswaram,
Matthias Kaehlcke, Stephen Boyd, Kishon Vijay Abraham I,
linux-arm-msm, devicetree
This patch fixes a regression in 5.7-rc1+
In commit 8fe75cd4cddf ("phy: qcom-qusb2: Add generic QUSB2 V2
PHY support"), the change was made to add "qcom,qusb2-v2-phy"
as a generic compat string. However the change also removed
the "qcom,sdm845-qusb2-phy" compat string, which is documented
in the binding and already in use.
This patch re-adds the "qcom,sdm845-qusb2-phy" compat string
which allows the driver to continue to work with existing dts
entries such as found on the db845c.
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 8fe75cd4cddf ("phy: qcom-qusb2: Add generic QUSB2 V2 PHY support")
Reported-by: YongQin Liu <yongqin.liu@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
v2: Add deprecation note on "qcom,sdm845-qusb2-phy" string
as suggested by Doug.
---
drivers/phy/qualcomm/phy-qcom-qusb2.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 3708d43b7508..393011a05b48 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -815,6 +815,13 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
}, {
.compatible = "qcom,msm8998-qusb2-phy",
.data = &msm8998_phy_cfg,
+ }, {
+ /*
+ * Deprecated. Only here to support legacy device
+ * trees that didn't include "qcom,qusb2-v2-phy"
+ */
+ .compatible = "qcom,sdm845-qusb2-phy",
+ .data = &qusb2_v2_phy_cfg,
}, {
.compatible = "qcom,qusb2-v2-phy",
.data = &qusb2_v2_phy_cfg,
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [RESEND x2][PATCH v2] phy: qcom-qusb2: Re add "qcom,sdm845-qusb2-phy" compat string
2020-04-21 4:18 [RESEND x2][PATCH v2] phy: qcom-qusb2: Re add "qcom,sdm845-qusb2-phy" compat string John Stultz
@ 2020-04-24 4:05 ` John Stultz
2020-04-24 4:07 ` Kishon Vijay Abraham I
0 siblings, 1 reply; 4+ messages in thread
From: John Stultz @ 2020-04-24 4:05 UTC (permalink / raw)
To: lkml
Cc: Andy Gross, Bjorn Andersson, Rob Herring, Mark Rutland,
Doug Anderson, Manu Gautam, Sandeep Maheswaram,
Matthias Kaehlcke, Stephen Boyd, Kishon Vijay Abraham I,
linux-arm-msm,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
On Mon, Apr 20, 2020 at 9:18 PM John Stultz <john.stultz@linaro.org> wrote:
>
> This patch fixes a regression in 5.7-rc1+
>
> In commit 8fe75cd4cddf ("phy: qcom-qusb2: Add generic QUSB2 V2
> PHY support"), the change was made to add "qcom,qusb2-v2-phy"
> as a generic compat string. However the change also removed
> the "qcom,sdm845-qusb2-phy" compat string, which is documented
> in the binding and already in use.
>
> This patch re-adds the "qcom,sdm845-qusb2-phy" compat string
> which allows the driver to continue to work with existing dts
> entries such as found on the db845c.
I hate to be a bother on this, but I'd really like to see this
regression resolved. This fix missed rc1 and rc2, and it would be a
shame to miss rc3 too.
Do I have the right folks on the cc for this?
thanks
-john
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [RESEND x2][PATCH v2] phy: qcom-qusb2: Re add "qcom,sdm845-qusb2-phy" compat string
2020-04-24 4:05 ` John Stultz
@ 2020-04-24 4:07 ` Kishon Vijay Abraham I
2020-04-24 4:14 ` John Stultz
0 siblings, 1 reply; 4+ messages in thread
From: Kishon Vijay Abraham I @ 2020-04-24 4:07 UTC (permalink / raw)
To: John Stultz, lkml
Cc: Andy Gross, Bjorn Andersson, Rob Herring, Mark Rutland,
Doug Anderson, Manu Gautam, Sandeep Maheswaram,
Matthias Kaehlcke, Stephen Boyd, linux-arm-msm,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
Hi John,
On 4/24/2020 9:35 AM, John Stultz wrote:
> On Mon, Apr 20, 2020 at 9:18 PM John Stultz <john.stultz@linaro.org> wrote:
>>
>> This patch fixes a regression in 5.7-rc1+
>>
>> In commit 8fe75cd4cddf ("phy: qcom-qusb2: Add generic QUSB2 V2
>> PHY support"), the change was made to add "qcom,qusb2-v2-phy"
>> as a generic compat string. However the change also removed
>> the "qcom,sdm845-qusb2-phy" compat string, which is documented
>> in the binding and already in use.
>>
>> This patch re-adds the "qcom,sdm845-qusb2-phy" compat string
>> which allows the driver to continue to work with existing dts
>> entries such as found on the db845c.
>
> I hate to be a bother on this, but I'd really like to see this
> regression resolved. This fix missed rc1 and rc2, and it would be a
> shame to miss rc3 too.
>
> Do I have the right folks on the cc for this?
Yes, I'll be merging this. Sorry for the delay.
Regards
Kishon
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [RESEND x2][PATCH v2] phy: qcom-qusb2: Re add "qcom,sdm845-qusb2-phy" compat string
2020-04-24 4:07 ` Kishon Vijay Abraham I
@ 2020-04-24 4:14 ` John Stultz
0 siblings, 0 replies; 4+ messages in thread
From: John Stultz @ 2020-04-24 4:14 UTC (permalink / raw)
To: Kishon Vijay Abraham I
Cc: lkml, Andy Gross, Bjorn Andersson, Rob Herring, Mark Rutland,
Doug Anderson, Manu Gautam, Sandeep Maheswaram,
Matthias Kaehlcke, Stephen Boyd, linux-arm-msm,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
On Thu, Apr 23, 2020 at 9:07 PM Kishon Vijay Abraham I <kishon@ti.com> wrote:
> On 4/24/2020 9:35 AM, John Stultz wrote:
> > On Mon, Apr 20, 2020 at 9:18 PM John Stultz <john.stultz@linaro.org> wrote:
> >>
> >> This patch fixes a regression in 5.7-rc1+
> >>
> >> In commit 8fe75cd4cddf ("phy: qcom-qusb2: Add generic QUSB2 V2
> >> PHY support"), the change was made to add "qcom,qusb2-v2-phy"
> >> as a generic compat string. However the change also removed
> >> the "qcom,sdm845-qusb2-phy" compat string, which is documented
> >> in the binding and already in use.
> >>
> >> This patch re-adds the "qcom,sdm845-qusb2-phy" compat string
> >> which allows the driver to continue to work with existing dts
> >> entries such as found on the db845c.
> >
> > I hate to be a bother on this, but I'd really like to see this
> > regression resolved. This fix missed rc1 and rc2, and it would be a
> > shame to miss rc3 too.
> >
> > Do I have the right folks on the cc for this?
>
> Yes, I'll be merging this. Sorry for the delay.
Thanks so much, sorry to be a nag! I was just worried it was slipping through.
thanks again!
-john
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-04-24 4:15 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-21 4:18 [RESEND x2][PATCH v2] phy: qcom-qusb2: Re add "qcom,sdm845-qusb2-phy" compat string John Stultz
2020-04-24 4:05 ` John Stultz
2020-04-24 4:07 ` Kishon Vijay Abraham I
2020-04-24 4:14 ` John Stultz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).