linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH RESEND v3 00/10] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name
@ 2020-12-05 15:56 Serge Semin
  2020-12-05 15:56 ` [PATCH v3 09/10] usb: dwc3: qcom: Detect DWC3 DT-nodes with "usb"-prefixed names Serge Semin
  2020-12-05 15:56 ` [PATCH v3 10/10] arm64: dts: qcom: Harmonize DWC USB3 DT nodes name Serge Semin
  0 siblings, 2 replies; 9+ messages in thread
From: Serge Semin @ 2020-12-05 15:56 UTC (permalink / raw)
  To: Felipe Balbi, Krzysztof Kozlowski, Florian Fainelli, Rob Herring,
	Greg Kroah-Hartman
  Cc: Serge Semin, Serge Semin, Vineet Gupta, Rafal Milecki, Wei Xu,
	Thomas Bogendoerfer, Michael Ellerman, Jason Cooper,
	Santosh Shilimkar, Shawn Guo, Benoit Cousson, Patrice Chotard,
	Maxime Ripard, Khuong Dinh, Andy Gross, Alexey Brodkin,
	Hauke Mehrtens, Maxime Coquelin, Alexandre Torgue,
	Amelie Delaunay, Vladimir Zapolskiy, Paul Cercueil,
	Matthias Brugger, Benjamin Herrenschmidt, Paul Mackerras,
	Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Kukjin Kim,
	Li Yang, Tony Lindgren, Chen-Yu Tsai, Bjorn Andersson, Jun Li,
	linux-snps-arc, bcm-kernel-feedback-list, linux-stm32,
	linux-arm-kernel, linux-mips, linux-mediatek, linuxppc-dev,
	linux-samsung-soc, linux-omap, linux-arm-msm, devicetree,
	linux-kernel

As the subject states this series is an attempt to harmonize the xHCI,
EHCI, OHCI and DWC USB3 DT nodes with the DT schema introduced in the
framework of the patchset [1].

Firstly as Krzysztof suggested we've deprecated a support of DWC USB3
controllers with "synopsys,"-vendor prefix compatible string in favor of
the ones with valid "snps,"-prefix. It's done in all the DTS files,
which have been unfortunate to define such nodes.

Secondly we suggest to fix the snps,quirk-frame-length-adjustment property
declaration in the Amlogic meson-g12-common.dtsi DTS file, since it has
been erroneously declared as boolean while having uint32 type. Neil said
it was ok to init that property with 0x20 value.

Thirdly the main part of the patchset concern fixing the xHCI, EHCI/OHCI
and DWC USB3 DT nodes name as in accordance with their DT schema the
corresponding node name is suppose to comply with the Generic USB HCD DT
schema, which requires the USB nodes to have the name acceptable by the
regexp: "^usb(@.*)?". Such requirement had been applicable even before we
introduced the new DT schema in [1], but as we can see it hasn't been
strictly implemented for a lot the DTS files. Since DT schema is now
available the automated DTS validation shall make sure that the rule isn't
violated.

Note most of these patches have been a part of the last three patches of
[1]. But since there is no way to have them merged in in a combined
manner, I had to move them to the dedicated series and split them up so to
be accepted by the corresponding subsystem maintainers one-by-one.

[1] Link: https://lore.kernel.org/linux-usb/20201014101402.18271-1-Sergey.Semin@baikalelectronics.ru/
Changelog v1:
- As Krzysztof suggested I've created a script which checked whether the
  node names had been also updated in all the depended dts files. As a
  result I found two more files which should have been also modified:
  arch/arc/boot/dts/{axc003.dtsi,axc003_idu.dtsi}
- Correct the USB DWC3 nodes name found in
  arch/arm64/boot/dts/apm/{apm-storm.dtsi,apm-shadowcat.dtsi} too.

Link: https://lore.kernel.org/linux-usb/20201020115959.2658-1-Sergey.Semin@baikalelectronics.ru
Changelog v2:
- Drop the patch:
  [PATCH 01/29] usb: dwc3: Discard synopsys,dwc3 compatibility string
  and get back the one which marks the "synopsys,dwc3" compatible string
  as deprecated into the DT schema related series.
- Drop the patches:
  [PATCH 03/29] arm: dts: am437x: Correct DWC USB3 compatible string
  [PATCH 04/29] arm: dts: exynos: Correct DWC USB3 compatible string
  [PATCH 07/29] arm: dts: bcm53x: Harmonize EHCI/OHCI DT nodes name
  [PATCH 08/29] arm: dts: stm32: Harmonize EHCI/OHCI DT nodes name
  [PATCH 16/29] arm: dts: bcm5301x: Harmonize xHCI DT nodes name
  [PATCH 19/29] arm: dts: exynos: Harmonize DWC USB3 DT nodes name
  [PATCH 21/29] arm: dts: ls1021a: Harmonize DWC USB3 DT nodes name
  [PATCH 22/29] arm: dts: omap5: Harmonize DWC USB3 DT nodes name
  [PATCH 24/29] arm64: dts: allwinner: h6: Harmonize DWC USB3 DT nodes name
  [PATCH 26/29] arm64: dts: exynos: Harmonize DWC USB3 DT nodes name
  [PATCH 27/29] arm64: dts: layerscape: Harmonize DWC USB3 DT nodes name
  since they have been applied to the corresponding maintainers repos.
- Fix drivers/usb/dwc3/dwc3-qcom.c to be looking for the "usb@"-prefixed
  sub-node and falling back to the "dwc3@"-prefixed one on failure.

Link: https://lore.kernel.org/linux-usb/20201111091552.15593-1-Sergey.Semin@baikalelectronics.ru
Changelog v3:
- Drop the patches:
  [PATCH v2 04/18] arm: dts: hisi-x5hd2: Harmonize EHCI/OHCI DT nodes name
  [PATCH v2 06/18] arm64: dts: hisi: Harmonize EHCI/OHCI DT nodes name
  [PATCH v2 07/18] mips: dts: jz47x: Harmonize EHCI/OHCI DT nodes name
  [PATCH v2 08/18] mips: dts: sead3: Harmonize EHCI/OHCI DT nodes name
  [PATCH v2 09/18] mips: dts: ralink: mt7628a: Harmonize EHCI/OHCI DT nodes name
  [PATCH v2 11/18] arm64: dts: marvell: cp11x: Harmonize xHCI DT nodes name
  [PATCH v2 12/18] arm: dts: marvell: armada-375: Harmonize DWC USB3 DT nodes name
  [PATCH v2 16/18] arm64: dts: hi3660: Harmonize DWC USB3 DT nodes name
  since they have been applied to the corresponding maintainers repos.

Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Rafal Milecki <zajec5@gmail.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Khuong Dinh <khuong@os.amperecomputing.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Jun Li <lijun.kernel@gmail.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Serge Semin (10):
  arm: dts: keystone: Correct DWC USB3 compatible string
  arm64: dts: amlogic: meson-g12: Set FL-adj property value
  arc: dts: Harmonize EHCI/OHCI DT nodes name
  arm: dts: lpc18xx: Harmonize EHCI/OHCI DT nodes name
  powerpc: dts: akebono: Harmonize EHCI/OHCI DT nodes name
  arm: dts: keystone: Harmonize DWC USB3 DT nodes name
  arm: dts: stih407-family: Harmonize DWC USB3 DT nodes name
  arm64: dts: apm: Harmonize DWC USB3 DT nodes name
  usb: dwc3: qcom: Detect DWC3 DT-nodes with "usb"-prefixed names
  arm64: dts: qcom: Harmonize DWC USB3 DT nodes name

 arch/arc/boot/dts/axc003.dtsi                     | 4 ++--
 arch/arc/boot/dts/axc003_idu.dtsi                 | 4 ++--
 arch/arc/boot/dts/axs10x_mb.dtsi                  | 4 ++--
 arch/arc/boot/dts/hsdk.dts                        | 4 ++--
 arch/arc/boot/dts/vdk_axs10x_mb.dtsi              | 2 +-
 arch/arm/boot/dts/keystone-k2e.dtsi               | 6 +++---
 arch/arm/boot/dts/keystone.dtsi                   | 4 ++--
 arch/arm/boot/dts/lpc18xx.dtsi                    | 4 ++--
 arch/arm/boot/dts/stih407-family.dtsi             | 2 +-
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 +-
 arch/arm64/boot/dts/apm/apm-shadowcat.dtsi        | 4 ++--
 arch/arm64/boot/dts/apm/apm-storm.dtsi            | 6 +++---
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi      | 4 ++--
 arch/arm64/boot/dts/qcom/ipq8074.dtsi             | 4 ++--
 arch/arm64/boot/dts/qcom/msm8996.dtsi             | 4 ++--
 arch/arm64/boot/dts/qcom/msm8998.dtsi             | 2 +-
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi          | 2 +-
 arch/arm64/boot/dts/qcom/qcs404.dtsi              | 4 ++--
 arch/arm64/boot/dts/qcom/sc7180.dtsi              | 2 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi              | 4 ++--
 arch/arm64/boot/dts/qcom/sm8150.dtsi              | 2 +-
 arch/powerpc/boot/dts/akebono.dts                 | 6 +++---
 drivers/usb/dwc3/dwc3-qcom.c                      | 3 ++-
 23 files changed, 42 insertions(+), 41 deletions(-)

-- 
2.29.2


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v3 09/10] usb: dwc3: qcom: Detect DWC3 DT-nodes with "usb"-prefixed names
  2020-12-05 15:56 [PATCH RESEND v3 00/10] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
@ 2020-12-05 15:56 ` Serge Semin
  2021-02-02 23:02   ` Bjorn Andersson
  2021-02-10 18:16   ` Rob Herring
  2020-12-05 15:56 ` [PATCH v3 10/10] arm64: dts: qcom: Harmonize DWC USB3 DT nodes name Serge Semin
  1 sibling, 2 replies; 9+ messages in thread
From: Serge Semin @ 2020-12-05 15:56 UTC (permalink / raw)
  To: Felipe Balbi, Krzysztof Kozlowski, Florian Fainelli, Rob Herring,
	Greg Kroah-Hartman, Andy Gross, Bjorn Andersson
  Cc: Serge Semin, Serge Semin, linux-arm-msm, linux-usb, linux-kernel

In accordance with the USB HCD/DRD schema all the USB controllers are
supposed to have DT-nodes named with prefix "^usb(@.*)?".  Since the
existing DT-nodes will be renamed in a subsequent patch let's first make
sure the DWC3 Qualcomm driver supports them and second falls back to the
deprecated naming so not to fail on the legacy DTS-files passed to the
newer kernels.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/usb/dwc3/dwc3-qcom.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index c703d552bbcf..49ad8d507d37 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -630,7 +630,8 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev)
 	struct device		*dev = &pdev->dev;
 	int			ret;
 
-	dwc3_np = of_get_child_by_name(np, "dwc3");
+	dwc3_np = of_get_child_by_name(np, "usb") ?:
+		  of_get_child_by_name(np, "dwc3");
 	if (!dwc3_np) {
 		dev_err(dev, "failed to find dwc3 core child\n");
 		return -ENODEV;
-- 
2.29.2


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH v3 10/10] arm64: dts: qcom: Harmonize DWC USB3 DT nodes name
  2020-12-05 15:56 [PATCH RESEND v3 00/10] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
  2020-12-05 15:56 ` [PATCH v3 09/10] usb: dwc3: qcom: Detect DWC3 DT-nodes with "usb"-prefixed names Serge Semin
@ 2020-12-05 15:56 ` Serge Semin
  1 sibling, 0 replies; 9+ messages in thread
From: Serge Semin @ 2020-12-05 15:56 UTC (permalink / raw)
  To: Felipe Balbi, Krzysztof Kozlowski, Florian Fainelli, Rob Herring,
	Greg Kroah-Hartman, Andy Gross, Bjorn Andersson
  Cc: Serge Semin, Serge Semin, linux-arm-msm, devicetree, linux-kernel

In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 4 ++--
 arch/arm64/boot/dts/qcom/ipq8074.dtsi        | 4 ++--
 arch/arm64/boot/dts/qcom/msm8996.dtsi        | 4 ++--
 arch/arm64/boot/dts/qcom/msm8998.dtsi        | 2 +-
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi     | 2 +-
 arch/arm64/boot/dts/qcom/qcs404.dtsi         | 4 ++--
 arch/arm64/boot/dts/qcom/sc7180.dtsi         | 2 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi         | 4 ++--
 arch/arm64/boot/dts/qcom/sm8150.dtsi         | 2 +-
 9 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index defcbd15edf9..34e97da98270 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -1064,7 +1064,7 @@ &usb2 {
 	status = "okay";
 	extcon = <&usb2_id>;
 
-	dwc3@7600000 {
+	usb@7600000 {
 		extcon = <&usb2_id>;
 		dr_mode = "otg";
 		maximum-speed = "high-speed";
@@ -1075,7 +1075,7 @@ &usb3 {
 	status = "okay";
 	extcon = <&usb3_id>;
 
-	dwc3@6a00000 {
+	usb@6a00000 {
 		extcon = <&usb3_id>;
 		dr_mode = "otg";
 	};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 829e37ac82f6..984e855bd8fd 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -427,7 +427,7 @@ usb_0: usb@8af8800 {
 			resets = <&gcc GCC_USB0_BCR>;
 			status = "disabled";
 
-			dwc_0: dwc3@8a00000 {
+			dwc_0: usb@8a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x8a00000 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
@@ -468,7 +468,7 @@ usb_1: usb@8cf8800 {
 			resets = <&gcc GCC_USB1_BCR>;
 			status = "disabled";
 
-			dwc_1: dwc3@8c00000 {
+			dwc_1: usb@8c00000 {
 				compatible = "snps,dwc3";
 				reg = <0x8c00000 0xcd00>;
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index fd6ae5464dea..4b073b8584de 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1768,7 +1768,7 @@ usb3: usb@6af8800 {
 			power-domains = <&gcc USB30_GDSC>;
 			status = "disabled";
 
-			dwc3@6a00000 {
+			usb@6a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x06a00000 0xcc00>;
 				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
@@ -1979,7 +1979,7 @@ usb2: usb@76f8800 {
 			power-domains = <&gcc USB30_GDSC>;
 			status = "disabled";
 
-			dwc3@7600000 {
+			usb@7600000 {
 				compatible = "snps,dwc3";
 				reg = <0x07600000 0xcc00>;
 				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index c45870600909..7cc7897e7b83 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1678,7 +1678,7 @@ usb3: usb@a8f8800 {
 
 			resets = <&gcc GCC_USB_30_BCR>;
 
-			usb3_dwc3: dwc3@a800000 {
+			usb3_dwc3: usb@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0x0a800000 0xcd00>;
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index a80c578484ba..f8a55307b855 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -337,7 +337,7 @@ &usb2_phy_sec {
 &usb3 {
 	status = "okay";
 
-	dwc3@7580000 {
+	usb@7580000 {
 		dr_mode = "host";
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index b654b802e95c..f6ef17553064 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -544,7 +544,7 @@ usb3: usb@7678800 {
 			assigned-clock-rates = <19200000>, <200000000>;
 			status = "disabled";
 
-			dwc3@7580000 {
+			usb@7580000 {
 				compatible = "snps,dwc3";
 				reg = <0x07580000 0xcd00>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -573,7 +573,7 @@ usb2: usb@79b8800 {
 			assigned-clock-rates = <19200000>, <133333333>;
 			status = "disabled";
 
-			dwc3@78c0000 {
+			usb@78c0000 {
 				compatible = "snps,dwc3";
 				reg = <0x078c0000 0xcc00>;
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 6678f1e8e395..6af40e0c5423 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2702,7 +2702,7 @@ usb_1: usb@a6f8800 {
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_1_dwc3: dwc3@a600000 {
+			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xe000>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 40e8c11f23ab..5d2376a60950 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3578,7 +3578,7 @@ usb_1: usb@a6f8800 {
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_1_dwc3: dwc3@a600000 {
+			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
@@ -3626,7 +3626,7 @@ usb_2: usb@a8f8800 {
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_2_dwc3: dwc3@a800000 {
+			usb_2_dwc3: usb@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a800000 0 0xcd00>;
 				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index f0a872e02686..638199f57708 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -918,7 +918,7 @@ usb_1: usb@a6f8800 {
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
-			usb_1_dwc3: dwc3@a600000 {
+			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.29.2


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* Re: [PATCH v3 09/10] usb: dwc3: qcom: Detect DWC3 DT-nodes with "usb"-prefixed names
  2020-12-05 15:56 ` [PATCH v3 09/10] usb: dwc3: qcom: Detect DWC3 DT-nodes with "usb"-prefixed names Serge Semin
@ 2021-02-02 23:02   ` Bjorn Andersson
  2021-02-03  9:06     ` Greg Kroah-Hartman
  2021-02-10 18:16   ` Rob Herring
  1 sibling, 1 reply; 9+ messages in thread
From: Bjorn Andersson @ 2021-02-02 23:02 UTC (permalink / raw)
  To: Serge Semin
  Cc: Felipe Balbi, Krzysztof Kozlowski, Florian Fainelli, Rob Herring,
	Greg Kroah-Hartman, Andy Gross, Serge Semin, linux-arm-msm,
	linux-usb, linux-kernel

On Sat 05 Dec 09:56 CST 2020, Serge Semin wrote:

> In accordance with the USB HCD/DRD schema all the USB controllers are
> supposed to have DT-nodes named with prefix "^usb(@.*)?".  Since the
> existing DT-nodes will be renamed in a subsequent patch let's first make
> sure the DWC3 Qualcomm driver supports them and second falls back to the
> deprecated naming so not to fail on the legacy DTS-files passed to the
> newer kernels.
> 

Felipe, will you merge this, so that I can merge the dts patch depending
on this into the Qualcomm DT tree?

Regards,
Bjorn

> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index c703d552bbcf..49ad8d507d37 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -630,7 +630,8 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev)
>  	struct device		*dev = &pdev->dev;
>  	int			ret;
>  
> -	dwc3_np = of_get_child_by_name(np, "dwc3");
> +	dwc3_np = of_get_child_by_name(np, "usb") ?:
> +		  of_get_child_by_name(np, "dwc3");
>  	if (!dwc3_np) {
>  		dev_err(dev, "failed to find dwc3 core child\n");
>  		return -ENODEV;
> -- 
> 2.29.2
> 

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v3 09/10] usb: dwc3: qcom: Detect DWC3 DT-nodes with "usb"-prefixed names
  2021-02-02 23:02   ` Bjorn Andersson
@ 2021-02-03  9:06     ` Greg Kroah-Hartman
  2021-02-03 11:18       ` Serge Semin
  2021-02-10 14:56       ` Serge Semin
  0 siblings, 2 replies; 9+ messages in thread
From: Greg Kroah-Hartman @ 2021-02-03  9:06 UTC (permalink / raw)
  To: Bjorn Andersson
  Cc: Serge Semin, Felipe Balbi, Krzysztof Kozlowski, Florian Fainelli,
	Rob Herring, Andy Gross, Serge Semin, linux-arm-msm, linux-usb,
	linux-kernel

On Tue, Feb 02, 2021 at 05:02:08PM -0600, Bjorn Andersson wrote:
> On Sat 05 Dec 09:56 CST 2020, Serge Semin wrote:
> 
> > In accordance with the USB HCD/DRD schema all the USB controllers are
> > supposed to have DT-nodes named with prefix "^usb(@.*)?".  Since the
> > existing DT-nodes will be renamed in a subsequent patch let's first make
> > sure the DWC3 Qualcomm driver supports them and second falls back to the
> > deprecated naming so not to fail on the legacy DTS-files passed to the
> > newer kernels.
> > 
> 
> Felipe, will you merge this, so that I can merge the dts patch depending
> on this into the Qualcomm DT tree?

Patches this old are long-gone out of our queues.  If it needs to be
applied to a linux-usb tree, please resend.

thanks,

greg k-h

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v3 09/10] usb: dwc3: qcom: Detect DWC3 DT-nodes with "usb"-prefixed names
  2021-02-03  9:06     ` Greg Kroah-Hartman
@ 2021-02-03 11:18       ` Serge Semin
  2021-02-10 14:56       ` Serge Semin
  1 sibling, 0 replies; 9+ messages in thread
From: Serge Semin @ 2021-02-03 11:18 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Serge Semin, Bjorn Andersson, Felipe Balbi, Krzysztof Kozlowski,
	Florian Fainelli, Rob Herring, Andy Gross, linux-arm-msm,
	linux-usb, linux-kernel

On Wed, Feb 03, 2021 at 10:06:46AM +0100, Greg Kroah-Hartman wrote:
> On Tue, Feb 02, 2021 at 05:02:08PM -0600, Bjorn Andersson wrote:
> > On Sat 05 Dec 09:56 CST 2020, Serge Semin wrote:
> > 
> > > In accordance with the USB HCD/DRD schema all the USB controllers are
> > > supposed to have DT-nodes named with prefix "^usb(@.*)?".  Since the
> > > existing DT-nodes will be renamed in a subsequent patch let's first make
> > > sure the DWC3 Qualcomm driver supports them and second falls back to the
> > > deprecated naming so not to fail on the legacy DTS-files passed to the
> > > newer kernels.
> > > 
> > 
> > Felipe, will you merge this, so that I can merge the dts patch depending
> > on this into the Qualcomm DT tree?
> 
> Patches this old are long-gone out of our queues.  If it needs to be
> applied to a linux-usb tree, please resend.

Hello Greg,
I'll revise the series and resend the patches, which haven't been
merged in yet, on this week. Sorry for a delay. I should have done
that earlier, but I have been kind of drown with fixes for DW GMAC
(stmmac) driver, so couldn't pay much attention to the rest of the
work.

-Sergey

> 
> thanks,
> 
> greg k-h

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v3 09/10] usb: dwc3: qcom: Detect DWC3 DT-nodes with "usb"-prefixed names
  2021-02-03  9:06     ` Greg Kroah-Hartman
  2021-02-03 11:18       ` Serge Semin
@ 2021-02-10 14:56       ` Serge Semin
  2021-02-10 17:07         ` Greg Kroah-Hartman
  1 sibling, 1 reply; 9+ messages in thread
From: Serge Semin @ 2021-02-10 14:56 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Serge Semin, Bjorn Andersson, Felipe Balbi, Krzysztof Kozlowski,
	Florian Fainelli, Rob Herring, Andy Gross, linux-arm-msm,
	linux-usb, linux-kernel

On Wed, Feb 03, 2021 at 10:06:46AM +0100, Greg Kroah-Hartman wrote:
> On Tue, Feb 02, 2021 at 05:02:08PM -0600, Bjorn Andersson wrote:
> > On Sat 05 Dec 09:56 CST 2020, Serge Semin wrote:
> > 
> > > In accordance with the USB HCD/DRD schema all the USB controllers are
> > > supposed to have DT-nodes named with prefix "^usb(@.*)?".  Since the
> > > existing DT-nodes will be renamed in a subsequent patch let's first make
> > > sure the DWC3 Qualcomm driver supports them and second falls back to the
> > > deprecated naming so not to fail on the legacy DTS-files passed to the
> > > newer kernels.
> > > 
> > 
> > Felipe, will you merge this, so that I can merge the dts patch depending
> > on this into the Qualcomm DT tree?
> 
> Patches this old are long-gone out of our queues.  If it needs to be
> applied to a linux-usb tree, please resend.

Greg, Bjorn,
I've revised and resent the series. Please find the recently posted
patchset:
Link: https://lore.kernel.org/lkml/20210208135154.6645-1-Sergey.Semin@baikalelectronics.ru/

Alas I've forgotten to Cc the linux-usb mailing list. Should I resend
the series one more time?

-Sergey

> 
> thanks,
> 
> greg k-h

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v3 09/10] usb: dwc3: qcom: Detect DWC3 DT-nodes with "usb"-prefixed names
  2021-02-10 14:56       ` Serge Semin
@ 2021-02-10 17:07         ` Greg Kroah-Hartman
  0 siblings, 0 replies; 9+ messages in thread
From: Greg Kroah-Hartman @ 2021-02-10 17:07 UTC (permalink / raw)
  To: Serge Semin
  Cc: Serge Semin, Bjorn Andersson, Felipe Balbi, Krzysztof Kozlowski,
	Florian Fainelli, Rob Herring, Andy Gross, linux-arm-msm,
	linux-usb, linux-kernel

On Wed, Feb 10, 2021 at 05:56:40PM +0300, Serge Semin wrote:
> On Wed, Feb 03, 2021 at 10:06:46AM +0100, Greg Kroah-Hartman wrote:
> > On Tue, Feb 02, 2021 at 05:02:08PM -0600, Bjorn Andersson wrote:
> > > On Sat 05 Dec 09:56 CST 2020, Serge Semin wrote:
> > > 
> > > > In accordance with the USB HCD/DRD schema all the USB controllers are
> > > > supposed to have DT-nodes named with prefix "^usb(@.*)?".  Since the
> > > > existing DT-nodes will be renamed in a subsequent patch let's first make
> > > > sure the DWC3 Qualcomm driver supports them and second falls back to the
> > > > deprecated naming so not to fail on the legacy DTS-files passed to the
> > > > newer kernels.
> > > > 
> > > 
> > > Felipe, will you merge this, so that I can merge the dts patch depending
> > > on this into the Qualcomm DT tree?
> > 
> > Patches this old are long-gone out of our queues.  If it needs to be
> > applied to a linux-usb tree, please resend.
> 
> Greg, Bjorn,
> I've revised and resent the series. Please find the recently posted
> patchset:
> Link: https://lore.kernel.org/lkml/20210208135154.6645-1-Sergey.Semin@baikalelectronics.ru/
> 
> Alas I've forgotten to Cc the linux-usb mailing list. Should I resend
> the series one more time?

Please do.

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v3 09/10] usb: dwc3: qcom: Detect DWC3 DT-nodes with "usb"-prefixed names
  2020-12-05 15:56 ` [PATCH v3 09/10] usb: dwc3: qcom: Detect DWC3 DT-nodes with "usb"-prefixed names Serge Semin
  2021-02-02 23:02   ` Bjorn Andersson
@ 2021-02-10 18:16   ` Rob Herring
  1 sibling, 0 replies; 9+ messages in thread
From: Rob Herring @ 2021-02-10 18:16 UTC (permalink / raw)
  To: Serge Semin
  Cc: Felipe Balbi, Krzysztof Kozlowski, Florian Fainelli,
	Greg Kroah-Hartman, Andy Gross, Bjorn Andersson, Serge Semin,
	linux-arm-msm, Linux USB List, linux-kernel

On Sat, Dec 5, 2020 at 9:56 AM Serge Semin
<Sergey.Semin@baikalelectronics.ru> wrote:
>
> In accordance with the USB HCD/DRD schema all the USB controllers are
> supposed to have DT-nodes named with prefix "^usb(@.*)?".  Since the
> existing DT-nodes will be renamed in a subsequent patch let's first make
> sure the DWC3 Qualcomm driver supports them and second falls back to the
> deprecated naming so not to fail on the legacy DTS-files passed to the
> newer kernels.
>
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index c703d552bbcf..49ad8d507d37 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -630,7 +630,8 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev)
>         struct device           *dev = &pdev->dev;
>         int                     ret;
>
> -       dwc3_np = of_get_child_by_name(np, "dwc3");
> +       dwc3_np = of_get_child_by_name(np, "usb") ?:
> +                 of_get_child_by_name(np, "dwc3");

Is there some reason using compatible instead wouldn't work here?

>         if (!dwc3_np) {
>                 dev_err(dev, "failed to find dwc3 core child\n");
>                 return -ENODEV;
> --
> 2.29.2
>

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2021-02-10 18:20 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-05 15:56 [PATCH RESEND v3 00/10] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
2020-12-05 15:56 ` [PATCH v3 09/10] usb: dwc3: qcom: Detect DWC3 DT-nodes with "usb"-prefixed names Serge Semin
2021-02-02 23:02   ` Bjorn Andersson
2021-02-03  9:06     ` Greg Kroah-Hartman
2021-02-03 11:18       ` Serge Semin
2021-02-10 14:56       ` Serge Semin
2021-02-10 17:07         ` Greg Kroah-Hartman
2021-02-10 18:16   ` Rob Herring
2020-12-05 15:56 ` [PATCH v3 10/10] arm64: dts: qcom: Harmonize DWC USB3 DT nodes name Serge Semin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).