[PATCH v4 0/7] DRM/MSM: Add support for MSM8956 and Adreno 510

[PATCH v4 0/7] DRM/MSM: Add support for MSM8956 and Adreno 510

[kholk11]

From: AngeloGioacchino Del Regno <kholk11@gmail.com>

This patch series enables support for MSM8956/76 and its Adreno 510
GPU on the current DRM driver.

The personal aim is to upstream MSM8956 as much as possible.

This code has been tested on two Sony phones featuring the Qualcomm
MSM8956 SoC.

Changes in v2:
- MDP5: Documented tbu and tbu_rt clocks (Jeffrey)
- Adreno510:
  - Lower case hex where required (Jordan)
  - Direct register writes (Jordan)
  - Used gpu_rmw() where required (Jordan)
  - No mentioning of unsupported A5xx (Jordan)
  - ZAP firmware exclusions not per-model (Rob)

Changes in v3:
- Rebased onto linux-next 20191015
- Renamed MSM8x56 references to MSM8x76 (the reason is that I am
  using the 8976/8x76 name for all the other drivers. Also, the
  8976 and 8956 chips are equal and the only changing part is
  the CPU big cores count)
- Splitted dt-bindings modifications as per request (Sean)

Changes in v4:
- Fixed io_start for the secondary dsi phy on family-b

AngeloGioacchino Del Regno (7):
  drm/msm/mdp5: Add optional TBU and TBU_RT clocks
  dt-bindings: msm/mdp5: Document optional TBU and TBU_RT clocks
  drm/msm/mdp5: Add configuration for msm8x76
  drm/msm/dsi: Add configuration for 28nm PLL on family B
  dt-bindings: msm/dsi: Add 28nm PLL for family B compatible
  drm/msm/dsi: Add configuration for 8x76
  drm/msm/adreno: Add support for Adreno 510 GPU

 .../devicetree/bindings/display/msm/dsi.txt   |  1 +
 .../devicetree/bindings/display/msm/mdp5.txt  |  2 +
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c         | 73 +++++++++++---
 drivers/gpu/drm/msm/adreno/a5xx_power.c       |  7 ++
 drivers/gpu/drm/msm/adreno/adreno_device.c    | 15 +++
 drivers/gpu/drm/msm/adreno/adreno_gpu.h       |  5 +
 drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c      | 98 +++++++++++++++++++
 drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c      | 10 ++
 drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.h      |  2 +
 drivers/gpu/drm/msm/dsi/dsi_cfg.c             | 22 +++++
 drivers/gpu/drm/msm/dsi/dsi_cfg.h             |  1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c         |  2 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h         |  1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c    | 18 ++++
 14 files changed, 243 insertions(+), 14 deletions(-)

-- 
2.21.0

[PATCH v4 1/7] drm/msm/mdp5: Add optional TBU and TBU_RT clocks

[kholk11]

From: AngeloGioacchino Del Regno <kholk11@gmail.com>

Some SoCs, like MSM8956/8976 (and APQ variants), do feature these
clocks and we need to enable them in order to get both of the
hw (mdp5/rot) Translation Buffer Units (TBUs) to properly work.

Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
---
 drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c | 10 ++++++++++
 drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.h |  2 ++
 2 files changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
index 5476892a335f..e43ecd4be10a 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
@@ -309,6 +309,10 @@ int mdp5_disable(struct mdp5_kms *mdp5_kms)
 	mdp5_kms->enable_count--;
 	WARN_ON(mdp5_kms->enable_count < 0);
 
+	if (mdp5_kms->tbu_rt_clk)
+		clk_disable_unprepare(mdp5_kms->tbu_rt_clk);
+	if (mdp5_kms->tbu_clk)
+		clk_disable_unprepare(mdp5_kms->tbu_clk);
 	clk_disable_unprepare(mdp5_kms->ahb_clk);
 	clk_disable_unprepare(mdp5_kms->axi_clk);
 	clk_disable_unprepare(mdp5_kms->core_clk);
@@ -329,6 +333,10 @@ int mdp5_enable(struct mdp5_kms *mdp5_kms)
 	clk_prepare_enable(mdp5_kms->core_clk);
 	if (mdp5_kms->lut_clk)
 		clk_prepare_enable(mdp5_kms->lut_clk);
+	if (mdp5_kms->tbu_clk)
+		clk_prepare_enable(mdp5_kms->tbu_clk);
+	if (mdp5_kms->tbu_rt_clk)
+		clk_prepare_enable(mdp5_kms->tbu_rt_clk);
 
 	return 0;
 }
@@ -965,6 +973,8 @@ static int mdp5_init(struct platform_device *pdev, struct drm_device *dev)
 
 	/* optional clocks: */
 	get_clk(pdev, &mdp5_kms->lut_clk, "lut", false);
+	get_clk(pdev, &mdp5_kms->tbu_clk, "tbu", false);
+	get_clk(pdev, &mdp5_kms->tbu_rt_clk, "tbu_rt", false);
 
 	/* we need to set a default rate before enabling.  Set a safe
 	 * rate first, then figure out hw revision, and then set a
diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.h b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.h
index d1bf4fdfc815..128866742593 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.h
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.h
@@ -53,6 +53,8 @@ struct mdp5_kms {
 	struct clk *ahb_clk;
 	struct clk *core_clk;
 	struct clk *lut_clk;
+	struct clk *tbu_clk;
+	struct clk *tbu_rt_clk;
 	struct clk *vsync_clk;
 
 	/*
-- 
2.21.0

[PATCH v4 2/7] dt-bindings: msm/mdp5: Document optional TBU and TBU_RT clocks

[kholk11]

From: AngeloGioacchino Del Regno <kholk11@gmail.com>

These two clocks aren't present in all versions of the MDP5 HW:
where present, they are needed to enable the Translation Buffer
Unit(s).

Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
---
 Documentation/devicetree/bindings/display/msm/mdp5.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt
index 4e11338548aa..43d11279c925 100644
--- a/Documentation/devicetree/bindings/display/msm/mdp5.txt
+++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt
@@ -76,6 +76,8 @@ Required properties:
 Optional properties:
 - clock-names: the following clocks are optional:
   * "lut"
+  * "tbu"
+  * "tbu_rt"
 
 Example:
 
-- 
2.21.0

[PATCH v4 3/7] drm/msm/mdp5: Add configuration for msm8x76

[kholk11]

From: AngeloGioacchino Del Regno <kholk11@gmail.com>

Add the configuration entries for the MDP5 v1.11, found on
MSM8956, MSM8976 and APQ variants.

Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
---
 drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c | 98 ++++++++++++++++++++++++
 1 file changed, 98 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c
index 7c9c1ddae821..1f48f64539a2 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c
@@ -545,6 +545,103 @@ static const struct mdp5_cfg_hw msm8x96_config = {
 	.max_clk = 412500000,
 };
 
+const struct mdp5_cfg_hw msm8x76_config = {
+	.name = "msm8x76",
+	.mdp = {
+		.count = 1,
+		.caps = MDP_CAP_SMP |
+			MDP_CAP_DSC |
+			MDP_CAP_SRC_SPLIT |
+			0,
+	},
+	.ctl = {
+		.count = 3,
+		.base = { 0x01000, 0x01200, 0x01400 },
+		.flush_hw_mask = 0xffffffff,
+	},
+	.smp = {
+		.mmb_count = 10,
+		.mmb_size = 10240,
+		.clients = {
+			[SSPP_VIG0] = 1, [SSPP_VIG1] = 9,
+			[SSPP_DMA0] = 4,
+			[SSPP_RGB0] = 7, [SSPP_RGB1] = 8,
+		},
+	},
+	.pipe_vig = {
+		.count = 2,
+		.base = { 0x04000, 0x06000 },
+		.caps = MDP_PIPE_CAP_HFLIP	|
+			MDP_PIPE_CAP_VFLIP	|
+			MDP_PIPE_CAP_SCALE	|
+			MDP_PIPE_CAP_CSC	|
+			MDP_PIPE_CAP_DECIMATION	|
+			MDP_PIPE_CAP_SW_PIX_EXT	|
+			0,
+	},
+	.pipe_rgb = {
+		.count = 2,
+		.base = { 0x14000, 0x16000 },
+		.caps = MDP_PIPE_CAP_HFLIP	|
+			MDP_PIPE_CAP_VFLIP	|
+			MDP_PIPE_CAP_DECIMATION	|
+			MDP_PIPE_CAP_SW_PIX_EXT	|
+			0,
+	},
+	.pipe_dma = {
+		.count = 1,
+		.base = { 0x24000 },
+		.caps = MDP_PIPE_CAP_HFLIP	|
+			MDP_PIPE_CAP_VFLIP	|
+			MDP_PIPE_CAP_SW_PIX_EXT	|
+			0,
+	},
+	.pipe_cursor = {
+		.count = 1,
+		.base = { 0x440DC },
+		.caps = MDP_PIPE_CAP_HFLIP	|
+			MDP_PIPE_CAP_VFLIP	|
+			MDP_PIPE_CAP_SW_PIX_EXT	|
+			MDP_PIPE_CAP_CURSOR	|
+			0,
+	},
+	.lm = {
+		.count = 2,
+		.base = { 0x44000, 0x45000 },
+		.instances = {
+				{ .id = 0, .pp = 0, .dspp = 0,
+				  .caps = MDP_LM_CAP_DISPLAY, },
+				{ .id = 1, .pp = -1, .dspp = -1,
+				  .caps = MDP_LM_CAP_WB },
+			     },
+		.nb_stages = 8,
+		.max_width = 2560,
+		.max_height = 0xFFFF,
+	},
+	.dspp = {
+		.count = 1,
+		.base = { 0x54000 },
+
+	},
+	.pp = {
+		.count = 3,
+		.base = { 0x70000, 0x70800, 0x72000 },
+	},
+	.dsc = {
+		.count = 2,
+		.base = { 0x80000, 0x80400 },
+	},
+	.intf = {
+		.base = { 0x6a000, 0x6a800, 0x6b000 },
+		.connect = {
+			[0] = INTF_DISABLED,
+			[1] = INTF_DSI,
+			[2] = INTF_DSI,
+		},
+	},
+	.max_clk = 360000000,
+};
+
 static const struct mdp5_cfg_hw msm8917_config = {
 	.name = "msm8917",
 	.mdp = {
@@ -745,6 +842,7 @@ static const struct mdp5_cfg_handler cfg_handlers_v1[] = {
 	{ .revision = 6, .config = { .hw = &msm8x16_config } },
 	{ .revision = 9, .config = { .hw = &msm8x94_config } },
 	{ .revision = 7, .config = { .hw = &msm8x96_config } },
+	{ .revision = 11, .config = { .hw = &msm8x76_config } },
 	{ .revision = 15, .config = { .hw = &msm8917_config } },
 };
 
-- 
2.21.0

[PATCH v4 4/7] drm/msm/dsi: Add configuration for 28nm PLL on family B

[kholk11]

From: AngeloGioacchino Del Regno <kholk11@gmail.com>

The 28nm PLL has a different iospace on MSM/APQ family B SoCs:
add a new configuration and use it when the DT reports the
"qcom,dsi-phy-28nm-hpm-fam-b" compatible.

Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c      |  2 ++
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h      |  1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 18 ++++++++++++++++++
 3 files changed, 21 insertions(+)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index aa22c3ae5230..b0cfa67d2a57 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -483,6 +483,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
 #ifdef CONFIG_DRM_MSM_DSI_28NM_PHY
 	{ .compatible = "qcom,dsi-phy-28nm-hpm",
 	  .data = &dsi_phy_28nm_hpm_cfgs },
+	{ .compatible = "qcom,dsi-phy-28nm-hpm-fam-b",
+	  .data = &dsi_phy_28nm_hpm_famb_cfgs },
 	{ .compatible = "qcom,dsi-phy-28nm-lp",
 	  .data = &dsi_phy_28nm_lp_cfgs },
 #endif
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index c4069ce6afe6..24b294ed3059 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -40,6 +40,7 @@ struct msm_dsi_phy_cfg {
 };
 
 extern const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_famb_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
index b3f678f6c2aa..66506ea86dd6 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
@@ -142,6 +142,24 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs = {
 	.num_dsi_phy = 2,
 };
 
+const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_famb_cfgs = {
+	.type = MSM_DSI_PHY_28NM_HPM,
+	.src_pll_truthtable = { {true, true}, {false, true} },
+	.reg_cfg = {
+		.num = 1,
+		.regs = {
+			{"vddio", 100000, 100},
+		},
+	},
+	.ops = {
+		.enable = dsi_28nm_phy_enable,
+		.disable = dsi_28nm_phy_disable,
+		.init = msm_dsi_phy_init_common,
+	},
+	.io_start = { 0x1a94400, 0x1a96400 },
+	.num_dsi_phy = 2,
+};
+
 const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = {
 	.type = MSM_DSI_PHY_28NM_LP,
 	.src_pll_truthtable = { {true, true}, {true, true} },
-- 
2.21.0

[PATCH v4 5/7] dt-bindings: msm/dsi: Add 28nm PLL for family B compatible

[kholk11]

From: AngeloGioacchino Del Regno <kholk11@gmail.com>

On family B SoCs, the 28nm PLL has a different iospace address
and that required a new compatible in the driver.

Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
---
 Documentation/devicetree/bindings/display/msm/dsi.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index af95586c898f..d3ba9ee22f38 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -83,6 +83,7 @@ DSI PHY:
 Required properties:
 - compatible: Could be the following
   * "qcom,dsi-phy-28nm-hpm"
+  * "qcom,dsi-phy-28nm-hpm-fam-b"
   * "qcom,dsi-phy-28nm-lp"
   * "qcom,dsi-phy-20nm"
   * "qcom,dsi-phy-28nm-8960"
-- 
2.21.0

[PATCH v4 6/7] drm/msm/dsi: Add configuration for 8x76

[kholk11]

From: AngeloGioacchino Del Regno <kholk11@gmail.com>

MSM8976, MSM8976 and APQ variants have DSI version 3:10040002
(DSI 6G V1.4.2), featuring two DSIs.
They need three clocks (mdp_core, iface, bus), one GDSC and
two vregs, VDDA at 1.2V and VDDIO at 1.8V.

Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
---
 drivers/gpu/drm/msm/dsi/dsi_cfg.c | 22 ++++++++++++++++++++++
 drivers/gpu/drm/msm/dsi/dsi_cfg.h |  1 +
 2 files changed, 23 insertions(+)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index e74dc8cc904b..86ad3fdf207d 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -66,6 +66,26 @@ static const struct msm_dsi_config msm8916_dsi_cfg = {
 	.num_dsi = 1,
 };
 
+static const char * const dsi_8976_bus_clk_names[] = {
+	"mdp_core", "iface", "bus",
+};
+
+static const struct msm_dsi_config msm8976_dsi_cfg = {
+	.io_offset = DSI_6G_REG_SHIFT,
+	.reg_cfg = {
+		.num = 3,
+		.regs = {
+			{"gdsc", -1, -1},
+			{"vdda", 100000, 100},	/* 1.2 V */
+			{"vddio", 100000, 100},	/* 1.8 V */
+		},
+	},
+	.bus_clk_names = dsi_8976_bus_clk_names,
+	.num_bus_clks = ARRAY_SIZE(dsi_8976_bus_clk_names),
+	.io_start = { 0x1a94000, 0x1a96000 },
+	.num_dsi = 2,
+};
+
 static const struct msm_dsi_config msm8994_dsi_cfg = {
 	.io_offset = DSI_6G_REG_SHIFT,
 	.reg_cfg = {
@@ -197,6 +217,8 @@ static const struct msm_dsi_cfg_handler dsi_cfg_handlers[] = {
 		&msm8916_dsi_cfg, &msm_dsi_6g_host_ops},
 	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V1_4_1,
 		&msm8996_dsi_cfg, &msm_dsi_6g_host_ops},
+	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V1_4_2,
+		&msm8976_dsi_cfg, &msm_dsi_6g_host_ops},
 	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_2_0,
 		&msm8998_dsi_cfg, &msm_dsi_6g_v2_host_ops},
 	{MSM_DSI_VER_MAJOR_6G, MSM_DSI_6G_VER_MINOR_V2_2_1,
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.h b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
index e2b7a7dfbe49..50a37ceb6a25 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.h
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
@@ -17,6 +17,7 @@
 #define MSM_DSI_6G_VER_MINOR_V1_3	0x10030000
 #define MSM_DSI_6G_VER_MINOR_V1_3_1	0x10030001
 #define MSM_DSI_6G_VER_MINOR_V1_4_1	0x10040001
+#define MSM_DSI_6G_VER_MINOR_V1_4_2	0x10040002
 #define MSM_DSI_6G_VER_MINOR_V2_2_0	0x20000000
 #define MSM_DSI_6G_VER_MINOR_V2_2_1	0x20020001
 
-- 
2.21.0

[PATCH v4 7/7] drm/msm/adreno: Add support for Adreno 510 GPU

[kholk11]

From: AngeloGioacchino Del Regno <kholk11@gmail.com>

The Adreno 510 GPU is a stripped version of the Adreno 5xx,
found in low-end SoCs like 8x56 and 8x76, which has 256K of
GMEM, with no GPMU nor ZAP.
Also, since the Adreno 5xx part of this driver seems to be
developed with high-end Adreno GPUs in mind, and since this
is a lower end one, add a comment making clear which GPUs
which support is not implemented yet is not using the GPMU
related hw init code, so that future developers will not go
crazy with that.

By the way, the lower end Adreno GPUs with no GPMU are:
A505/A506/A510 (usually no ZAP firmware)
A508/A509/A512 (usually with ZAP firmware)

Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
---
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c      | 73 +++++++++++++++++-----
 drivers/gpu/drm/msm/adreno/a5xx_power.c    |  7 +++
 drivers/gpu/drm/msm/adreno/adreno_device.c | 15 +++++
 drivers/gpu/drm/msm/adreno/adreno_gpu.h    |  5 ++
 4 files changed, 86 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index 7fdc9e2bcaac..b02e2042547f 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -353,6 +353,9 @@ static int a5xx_me_init(struct msm_gpu *gpu)
 		 * 2D mode 3 draw
 		 */
 		OUT_RING(ring, 0x0000000B);
+	} else if (adreno_is_a510(adreno_gpu)) {
+		/* Workaround for token and syncs */
+		OUT_RING(ring, 0x00000001);
 	} else {
 		/* No workarounds enabled */
 		OUT_RING(ring, 0x00000000);
@@ -568,15 +571,24 @@ static int a5xx_hw_init(struct msm_gpu *gpu)
 		0x00100000 + adreno_gpu->gmem - 1);
 	gpu_write(gpu, REG_A5XX_UCHE_GMEM_RANGE_MAX_HI, 0x00000000);
 
-	gpu_write(gpu, REG_A5XX_CP_MEQ_THRESHOLDS, 0x40);
-	if (adreno_is_a530(adreno_gpu))
-		gpu_write(gpu, REG_A5XX_CP_MERCIU_SIZE, 0x40);
-	if (adreno_is_a540(adreno_gpu))
-		gpu_write(gpu, REG_A5XX_CP_MERCIU_SIZE, 0x400);
-	gpu_write(gpu, REG_A5XX_CP_ROQ_THRESHOLDS_2, 0x80000060);
-	gpu_write(gpu, REG_A5XX_CP_ROQ_THRESHOLDS_1, 0x40201B16);
-
-	gpu_write(gpu, REG_A5XX_PC_DBG_ECO_CNTL, (0x400 << 11 | 0x300 << 22));
+	if (adreno_is_a510(adreno_gpu)) {
+		gpu_write(gpu, REG_A5XX_CP_MEQ_THRESHOLDS, 0x20);
+		gpu_write(gpu, REG_A5XX_CP_MERCIU_SIZE, 0x20);
+		gpu_write(gpu, REG_A5XX_CP_ROQ_THRESHOLDS_2, 0x40000030);
+		gpu_write(gpu, REG_A5XX_CP_ROQ_THRESHOLDS_1, 0x20100D0A);
+		gpu_write(gpu, REG_A5XX_PC_DBG_ECO_CNTL,
+			  (0x200 << 11 | 0x200 << 22));
+	} else {
+		gpu_write(gpu, REG_A5XX_CP_MEQ_THRESHOLDS, 0x40);
+		if (adreno_is_a530(adreno_gpu))
+			gpu_write(gpu, REG_A5XX_CP_MERCIU_SIZE, 0x40);
+		if (adreno_is_a540(adreno_gpu))
+			gpu_write(gpu, REG_A5XX_CP_MERCIU_SIZE, 0x400);
+		gpu_write(gpu, REG_A5XX_CP_ROQ_THRESHOLDS_2, 0x80000060);
+		gpu_write(gpu, REG_A5XX_CP_ROQ_THRESHOLDS_1, 0x40201B16);
+		gpu_write(gpu, REG_A5XX_PC_DBG_ECO_CNTL,
+			  (0x400 << 11 | 0x300 << 22));
+	}
 
 	if (adreno_gpu->info->quirks & ADRENO_QUIRK_TWO_PASS_USE_WFI)
 		gpu_rmw(gpu, REG_A5XX_PC_DBG_ECO_CNTL, 0, (1 << 8));
@@ -589,6 +601,19 @@ static int a5xx_hw_init(struct msm_gpu *gpu)
 	/* Enable ME/PFP split notification */
 	gpu_write(gpu, REG_A5XX_RBBM_AHB_CNTL1, 0xA6FFFFFF);
 
+	/*
+	 *  In A5x, CCU can send context_done event of a particular context to
+	 *  UCHE which ultimately reaches CP even when there is valid
+	 *  transaction of that context inside CCU. This can let CP to program
+	 *  config registers, which will make the "valid transaction" inside
+	 *  CCU to be interpreted differently. This can cause gpu fault. This
+	 *  bug is fixed in latest A510 revision. To enable this bug fix -
+	 *  bit[11] of RB_DBG_ECO_CNTL need to be set to 0, default is 1
+	 *  (disable). For older A510 version this bit is unused.
+	 */
+	if (adreno_is_a510(adreno_gpu))
+		gpu_rmw(gpu, REG_A5XX_RB_DBG_ECO_CNTL, (1 << 11), 0);
+
 	/* Enable HWCG */
 	a5xx_set_hwcg(gpu, true);
 
@@ -635,7 +660,7 @@ static int a5xx_hw_init(struct msm_gpu *gpu)
 	/* UCHE */
 	gpu_write(gpu, REG_A5XX_CP_PROTECT(16), ADRENO_PROTECT_RW(0xE80, 16));
 
-	if (adreno_is_a530(adreno_gpu))
+	if (adreno_is_a530(adreno_gpu) || adreno_is_a510(adreno_gpu))
 		gpu_write(gpu, REG_A5XX_CP_PROTECT(17),
 			ADRENO_PROTECT_RW(0x10000, 0x8000));
 
@@ -679,7 +704,8 @@ static int a5xx_hw_init(struct msm_gpu *gpu)
 
 	a5xx_preempt_hw_init(gpu);
 
-	a5xx_gpmu_ucode_init(gpu);
+	if (!adreno_is_a510(adreno_gpu))
+		a5xx_gpmu_ucode_init(gpu);
 
 	ret = a5xx_ucode_init(gpu);
 	if (ret)
@@ -712,7 +738,8 @@ static int a5xx_hw_init(struct msm_gpu *gpu)
 	}
 
 	/*
-	 * Try to load a zap shader into the secure world. If successful
+	 * If the chip that we are using does support loading one, then
+	 * try to load a zap shader into the secure world. If successful
 	 * we can use the CP to switch out of secure mode. If not then we
 	 * have no resource but to try to switch ourselves out manually. If we
 	 * guessed wrong then access to the RBBM_SECVID_TRUST_CNTL register will
@@ -1066,6 +1093,7 @@ static void a5xx_dump(struct msm_gpu *gpu)
 
 static int a5xx_pm_resume(struct msm_gpu *gpu)
 {
+	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
 	int ret;
 
 	/* Turn on the core power */
@@ -1073,6 +1101,15 @@ static int a5xx_pm_resume(struct msm_gpu *gpu)
 	if (ret)
 		return ret;
 
+	if (adreno_is_a510(adreno_gpu)) {
+		/* Halt the sp_input_clk at HM level */
+		gpu_write(gpu, REG_A5XX_RBBM_CLOCK_CNTL, 0x00000055);
+		a5xx_set_hwcg(gpu, true);
+		/* Turn on sp_input_clk at HM level */
+		gpu_rmw(gpu, REG_A5XX_RBBM_CLOCK_CNTL, 0xff, 0);
+		return 0;
+	}
+
 	/* Turn the RBCCU domain first to limit the chances of voltage droop */
 	gpu_write(gpu, REG_A5XX_GPMU_RBCCU_POWER_CNTL, 0x778000);
 
@@ -1101,9 +1138,17 @@ static int a5xx_pm_resume(struct msm_gpu *gpu)
 
 static int a5xx_pm_suspend(struct msm_gpu *gpu)
 {
+	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
+	u32 mask = 0xf;
+
+	/* A510 has 3 XIN ports in VBIF */
+	if (adreno_is_a510(adreno_gpu))
+		mask = 0x7;
+
 	/* Clear the VBIF pipe before shutting down */
-	gpu_write(gpu, REG_A5XX_VBIF_XIN_HALT_CTRL0, 0xF);
-	spin_until((gpu_read(gpu, REG_A5XX_VBIF_XIN_HALT_CTRL1) & 0xF) == 0xF);
+	gpu_write(gpu, REG_A5XX_VBIF_XIN_HALT_CTRL0, mask);
+	spin_until((gpu_read(gpu, REG_A5XX_VBIF_XIN_HALT_CTRL1) &
+				mask) == mask);
 
 	gpu_write(gpu, REG_A5XX_VBIF_XIN_HALT_CTRL0, 0);
 
diff --git a/drivers/gpu/drm/msm/adreno/a5xx_power.c b/drivers/gpu/drm/msm/adreno/a5xx_power.c
index a3a06db675ba..321a8061fd32 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_power.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_power.c
@@ -297,6 +297,10 @@ int a5xx_power_init(struct msm_gpu *gpu)
 	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
 	int ret;
 
+	/* Not all A5xx chips have a GPMU */
+	if (adreno_is_a510(adreno_gpu))
+		return 0;
+
 	/* Set up the limits management */
 	if (adreno_is_a530(adreno_gpu))
 		a530_lm_setup(gpu);
@@ -326,6 +330,9 @@ void a5xx_gpmu_ucode_init(struct msm_gpu *gpu)
 	unsigned int *data, *ptr, *cmds;
 	unsigned int cmds_size;
 
+	if (adreno_is_a510(adreno_gpu))
+		return;
+
 	if (a5xx_gpu->gpmu_bo)
 		return;
 
diff --git a/drivers/gpu/drm/msm/adreno/adreno_device.c b/drivers/gpu/drm/msm/adreno/adreno_device.c
index 0888e0df660d..fbbdf86504f5 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_device.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_device.c
@@ -114,6 +114,21 @@ static const struct adreno_info gpulist[] = {
 		.gmem  = (SZ_1M + SZ_512K),
 		.inactive_period = DRM_MSM_INACTIVE_PERIOD,
 		.init  = a4xx_gpu_init,
+	}, {
+		.rev   = ADRENO_REV(5, 1, 0, ANY_ID),
+		.revn = 510,
+		.name = "A510",
+		.fw = {
+			[ADRENO_FW_PM4] = "a530_pm4.fw",
+			[ADRENO_FW_PFP] = "a530_pfp.fw",
+		},
+		.gmem = SZ_256K,
+		/*
+		 * Increase inactive period to 250 to avoid bouncing
+		 * the GDSC which appears to make it grumpy
+		 */
+		.inactive_period = 250,
+		.init = a5xx_gpu_init,
 	}, {
 		.rev = ADRENO_REV(5, 3, 0, 2),
 		.revn = 530,
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.h b/drivers/gpu/drm/msm/adreno/adreno_gpu.h
index d225a8a92e58..e71a7570ef72 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.h
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.h
@@ -212,6 +212,11 @@ static inline int adreno_is_a430(struct adreno_gpu *gpu)
        return gpu->revn == 430;
 }
 
+static inline int adreno_is_a510(struct adreno_gpu *gpu)
+{
+	return gpu->revn == 510;
+}
+
 static inline int adreno_is_a530(struct adreno_gpu *gpu)
 {
 	return gpu->revn == 530;
-- 
2.21.0

Re: [PATCH v4 2/7] dt-bindings: msm/mdp5: Document optional TBU and TBU_RT clocks

[Rob Clark]

+ devicetree list

On Thu, Oct 31, 2019 at 3:44 AM <kholk11@gmail.com> wrote:
>
> From: AngeloGioacchino Del Regno <kholk11@gmail.com>
>
> These two clocks aren't present in all versions of the MDP5 HW:
> where present, they are needed to enable the Translation Buffer
> Unit(s).
>
> Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
> ---
>  Documentation/devicetree/bindings/display/msm/mdp5.txt | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt
> index 4e11338548aa..43d11279c925 100644
> --- a/Documentation/devicetree/bindings/display/msm/mdp5.txt
> +++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt
> @@ -76,6 +76,8 @@ Required properties:
>  Optional properties:
>  - clock-names: the following clocks are optional:
>    * "lut"
> +  * "tbu"
> +  * "tbu_rt"
>
>  Example:
>
> --
> 2.21.0
>

Re: [PATCH v4 5/7] dt-bindings: msm/dsi: Add 28nm PLL for family B compatible

[Rob Clark]

+ devicetree list

On Thu, Oct 31, 2019 at 3:44 AM <kholk11@gmail.com> wrote:
>
> From: AngeloGioacchino Del Regno <kholk11@gmail.com>
>
> On family B SoCs, the 28nm PLL has a different iospace address
> and that required a new compatible in the driver.
>
> Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
> ---
>  Documentation/devicetree/bindings/display/msm/dsi.txt | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
> index af95586c898f..d3ba9ee22f38 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
> @@ -83,6 +83,7 @@ DSI PHY:
>  Required properties:
>  - compatible: Could be the following
>    * "qcom,dsi-phy-28nm-hpm"
> +  * "qcom,dsi-phy-28nm-hpm-fam-b"
>    * "qcom,dsi-phy-28nm-lp"
>    * "qcom,dsi-phy-20nm"
>    * "qcom,dsi-phy-28nm-8960"
> --
> 2.21.0
>

Re: [PATCH v4 2/7] dt-bindings: msm/mdp5: Document optional TBU and TBU_RT clocks

[Rob Herring]

On Sat, Nov 2, 2019 at 11:53 AM Rob Clark <robdclark@gmail.com> wrote:
>
> + devicetree list

It needs to be resent to get into my queue.

> On Thu, Oct 31, 2019 at 3:44 AM <kholk11@gmail.com> wrote:
> >
> > From: AngeloGioacchino Del Regno <kholk11@gmail.com>
> >
> > These two clocks aren't present in all versions of the MDP5 HW:
> > where present, they are needed to enable the Translation Buffer
> > Unit(s).
> >
> > Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
> > ---
> >  Documentation/devicetree/bindings/display/msm/mdp5.txt | 2 ++
> >  1 file changed, 2 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>

> >
> > diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt
> > index 4e11338548aa..43d11279c925 100644
> > --- a/Documentation/devicetree/bindings/display/msm/mdp5.txt
> > +++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt
> > @@ -76,6 +76,8 @@ Required properties:
> >  Optional properties:
> >  - clock-names: the following clocks are optional:
> >    * "lut"
> > +  * "tbu"
> > +  * "tbu_rt"
> >
> >  Example:
> >
> > --
> > 2.21.0
> >

Re: [PATCH v4 5/7] dt-bindings: msm/dsi: Add 28nm PLL for family B compatible

[Rob Herring]

On Thu, Oct 31, 2019 at 5:44 AM <kholk11@gmail.com> wrote:
>
> From: AngeloGioacchino Del Regno <kholk11@gmail.com>

Use get_maintainers.pl to send things to the right lists.

> On family B SoCs, the 28nm PLL has a different iospace address
> and that required a new compatible in the driver.
>
> Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
> ---
>  Documentation/devicetree/bindings/display/msm/dsi.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 5/7] dt-bindings: msm/dsi: Add 28nm PLL for family B compatible

[Bjorn Andersson]

On Thu 31 Oct 03:44 PDT 2019, kholk11@gmail.com wrote:

> From: AngeloGioacchino Del Regno <kholk11@gmail.com>
> 
> On family B SoCs, the 28nm PLL has a different iospace address
> and that required a new compatible in the driver.
> 
> Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
> ---
>  Documentation/devicetree/bindings/display/msm/dsi.txt | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
> index af95586c898f..d3ba9ee22f38 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
> @@ -83,6 +83,7 @@ DSI PHY:
>  Required properties:
>  - compatible: Could be the following
>    * "qcom,dsi-phy-28nm-hpm"
> +  * "qcom,dsi-phy-28nm-hpm-fam-b"

Wouldn't it be preferable to use specific platform numbers here?

Regards,
Bjorn

>    * "qcom,dsi-phy-28nm-lp"
>    * "qcom,dsi-phy-20nm"
>    * "qcom,dsi-phy-28nm-8960"
> -- 
> 2.21.0
>