* [PATCH v2 1/3] arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
@ 2021-10-12 11:27 J.R. Divya Antony
2021-10-12 11:27 ` [PATCH v2 2/3] arm64: dts: qcom: msm8916-asus-z00l: Add SDCard J.R. Divya Antony
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: J.R. Divya Antony @ 2021-10-12 11:27 UTC (permalink / raw)
To: bjorn.andersson; +Cc: linux-arm-msm, J.R. Divya Antony
Add support for touchscreen in this device.
Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com>
---
.../arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 41 +++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
index cee451e59385..71f4aa16058f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -4,6 +4,8 @@
#include "msm8916-pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Asus Zenfone 2 Laser";
@@ -48,6 +50,29 @@ usb_id: usb-id {
};
};
+&blsp_i2c5 {
+ status = "okay";
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5306";
+ reg = <0x38>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&pm8916_l11>;
+ iovcc-supply = <&pm8916_l6>;
+
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_default>;
+ };
+};
+
&blsp1_uart2 {
status = "okay";
};
@@ -185,6 +210,22 @@ gpio_keys_default: gpio-keys-default {
bias-pull-up;
};
+ touchscreen_default: touchscreen-default {
+ pins = "gpio13";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+
+ reset {
+ pins = "gpio12";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
usb_id_default: usb-id-default {
pins = "gpio110";
function = "gpio";
--
2.33.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 2/3] arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
2021-10-12 11:27 [PATCH v2 1/3] arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen J.R. Divya Antony
@ 2021-10-12 11:27 ` J.R. Divya Antony
2021-10-12 12:12 ` Stephan Gerhold
2021-10-12 11:27 ` [PATCH v2 3/3] arm64: dts: qcom: msm8916-asus-z00l: Add sensors J.R. Divya Antony
2021-10-12 12:11 ` [PATCH v2 1/3] arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen Stephan Gerhold
2 siblings, 1 reply; 6+ messages in thread
From: J.R. Divya Antony @ 2021-10-12 11:27 UTC (permalink / raw)
To: bjorn.andersson; +Cc: linux-arm-msm, J.R. Divya Antony
Enable SDHCI (SD Card) Storage.
Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com>
---
.../arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 33 +++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
index 71f4aa16058f..355c95365fcd 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -42,6 +42,21 @@ volume-down {
};
};
+ reg_sd_vmmc: regulator-sdcard-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "sdcard-vmmc";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ startup-delay-us = <200>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_vmmc_en_default>;
+ };
+
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
@@ -89,6 +104,16 @@ &sdhc_1 {
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
+&sdhc_2 {
+ status = "okay";
+ vmmc-supply = <®_sd_vmmc>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+ cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+};
+
&usb {
status = "okay";
extcon = <&usb_id>, <&usb_id>;
@@ -210,6 +235,14 @@ gpio_keys_default: gpio-keys-default {
bias-pull-up;
};
+ sd_vmmc_en_default: sd-vmmc-en-default {
+ pins = "gpio87";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
touchscreen_default: touchscreen-default {
pins = "gpio13";
function = "gpio";
--
2.33.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v2 2/3] arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
2021-10-12 11:27 ` [PATCH v2 2/3] arm64: dts: qcom: msm8916-asus-z00l: Add SDCard J.R. Divya Antony
@ 2021-10-12 12:12 ` Stephan Gerhold
0 siblings, 0 replies; 6+ messages in thread
From: Stephan Gerhold @ 2021-10-12 12:12 UTC (permalink / raw)
To: J.R. Divya Antony; +Cc: bjorn.andersson, linux-arm-msm
On Tue, Oct 12, 2021 at 04:57:34PM +0530, J.R. Divya Antony wrote:
> Enable SDHCI (SD Card) Storage.
>
> Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
> ---
> .../arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 33 +++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
> index 71f4aa16058f..355c95365fcd 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
> @@ -42,6 +42,21 @@ volume-down {
> };
> };
>
> + reg_sd_vmmc: regulator-sdcard-vmmc {
> + compatible = "regulator-fixed";
> + regulator-name = "sdcard-vmmc";
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> +
> + gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + startup-delay-us = <200>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd_vmmc_en_default>;
> + };
> +
> usb_id: usb-id {
> compatible = "linux,extcon-usb-gpio";
> id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
> @@ -89,6 +104,16 @@ &sdhc_1 {
> pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> };
>
> +&sdhc_2 {
> + status = "okay";
> + vmmc-supply = <®_sd_vmmc>;
> +
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
> + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
> +};
> +
> &usb {
> status = "okay";
> extcon = <&usb_id>, <&usb_id>;
> @@ -210,6 +235,14 @@ gpio_keys_default: gpio-keys-default {
> bias-pull-up;
> };
>
> + sd_vmmc_en_default: sd-vmmc-en-default {
> + pins = "gpio87";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> touchscreen_default: touchscreen-default {
> pins = "gpio13";
> function = "gpio";
> --
> 2.33.0
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 3/3] arm64: dts: qcom: msm8916-asus-z00l: Add sensors
2021-10-12 11:27 [PATCH v2 1/3] arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen J.R. Divya Antony
2021-10-12 11:27 ` [PATCH v2 2/3] arm64: dts: qcom: msm8916-asus-z00l: Add SDCard J.R. Divya Antony
@ 2021-10-12 11:27 ` J.R. Divya Antony
2021-10-12 12:14 ` Stephan Gerhold
2021-10-12 12:11 ` [PATCH v2 1/3] arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen Stephan Gerhold
2 siblings, 1 reply; 6+ messages in thread
From: J.R. Divya Antony @ 2021-10-12 11:27 UTC (permalink / raw)
To: bjorn.andersson; +Cc: linux-arm-msm, J.R. Divya Antony
This device has MPU-6515 imu and Asahi Kasei AK09911 magnetometer,
Add support for it.
Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com>
---
.../arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 51 +++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
index 355c95365fcd..c2afda74b5b3 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -65,6 +65,41 @@ usb_id: usb-id {
};
};
+&blsp_i2c2 {
+ status = "okay";
+
+ magnetometer@c {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0c>;
+
+ vdd-supply = <&pm8916_l8>;
+ vid-supply = <&pm8916_l6>;
+
+ reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mag_reset_default>;
+ };
+
+ imu@68 {
+ compatible = "invensense,mpu6515";
+ reg = <0x68>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <36 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&imu_default>;
+
+ mount-matrix = "1", "0", "0",
+ "0", "-1", "0",
+ "0", "0", "1";
+ };
+};
+
&blsp_i2c5 {
status = "okay";
@@ -235,6 +270,22 @@ gpio_keys_default: gpio-keys-default {
bias-pull-up;
};
+ imu_default: imu-default {
+ pins = "gpio36";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ mag_reset_default: mag-reset-default {
+ pins = "gpio112";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
sd_vmmc_en_default: sd-vmmc-en-default {
pins = "gpio87";
function = "gpio";
--
2.33.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v2 3/3] arm64: dts: qcom: msm8916-asus-z00l: Add sensors
2021-10-12 11:27 ` [PATCH v2 3/3] arm64: dts: qcom: msm8916-asus-z00l: Add sensors J.R. Divya Antony
@ 2021-10-12 12:14 ` Stephan Gerhold
0 siblings, 0 replies; 6+ messages in thread
From: Stephan Gerhold @ 2021-10-12 12:14 UTC (permalink / raw)
To: J.R. Divya Antony; +Cc: bjorn.andersson, linux-arm-msm
On Tue, Oct 12, 2021 at 04:57:35PM +0530, J.R. Divya Antony wrote:
> This device has MPU-6515 imu and Asahi Kasei AK09911 magnetometer,
> Add support for it.
>
> Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
> ---
> .../arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 51 +++++++++++++++++++
> 1 file changed, 51 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
> index 355c95365fcd..c2afda74b5b3 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
> @@ -65,6 +65,41 @@ usb_id: usb-id {
> };
> };
>
> +&blsp_i2c2 {
> + status = "okay";
> +
> + magnetometer@c {
> + compatible = "asahi-kasei,ak09911";
> + reg = <0x0c>;
> +
> + vdd-supply = <&pm8916_l8>;
> + vid-supply = <&pm8916_l6>;
> +
> + reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&mag_reset_default>;
> + };
> +
> + imu@68 {
> + compatible = "invensense,mpu6515";
> + reg = <0x68>;
> +
> + interrupt-parent = <&msmgpio>;
> + interrupts = <36 IRQ_TYPE_EDGE_RISING>;
> +
> + vdd-supply = <&pm8916_l17>;
> + vddio-supply = <&pm8916_l6>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&imu_default>;
> +
> + mount-matrix = "1", "0", "0",
> + "0", "-1", "0",
> + "0", "0", "1";
> + };
> +};
> +
> &blsp_i2c5 {
> status = "okay";
>
> @@ -235,6 +270,22 @@ gpio_keys_default: gpio-keys-default {
> bias-pull-up;
> };
>
> + imu_default: imu-default {
> + pins = "gpio36";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + mag_reset_default: mag-reset-default {
> + pins = "gpio112";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> sd_vmmc_en_default: sd-vmmc-en-default {
> pins = "gpio87";
> function = "gpio";
> --
> 2.33.0
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/3] arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
2021-10-12 11:27 [PATCH v2 1/3] arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen J.R. Divya Antony
2021-10-12 11:27 ` [PATCH v2 2/3] arm64: dts: qcom: msm8916-asus-z00l: Add SDCard J.R. Divya Antony
2021-10-12 11:27 ` [PATCH v2 3/3] arm64: dts: qcom: msm8916-asus-z00l: Add sensors J.R. Divya Antony
@ 2021-10-12 12:11 ` Stephan Gerhold
2 siblings, 0 replies; 6+ messages in thread
From: Stephan Gerhold @ 2021-10-12 12:11 UTC (permalink / raw)
To: J.R. Divya Antony; +Cc: bjorn.andersson, linux-arm-msm
On Tue, Oct 12, 2021 at 04:57:33PM +0530, J.R. Divya Antony wrote:
> Add support for touchscreen in this device.
>
> Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
> ---
> .../arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 41 +++++++++++++++++++
> 1 file changed, 41 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
> index cee451e59385..71f4aa16058f 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
> @@ -4,6 +4,8 @@
>
> #include "msm8916-pm8916.dtsi"
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> model = "Asus Zenfone 2 Laser";
> @@ -48,6 +50,29 @@ usb_id: usb-id {
> };
> };
>
> +&blsp_i2c5 {
> + status = "okay";
> +
> + touchscreen@38 {
> + compatible = "edt,edt-ft5306";
> + reg = <0x38>;
> +
> + interrupt-parent = <&msmgpio>;
> + interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
> +
> + reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>;
> +
> + vcc-supply = <&pm8916_l11>;
> + iovcc-supply = <&pm8916_l6>;
> +
> + touchscreen-size-x = <720>;
> + touchscreen-size-y = <1280>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&touchscreen_default>;
> + };
> +};
> +
> &blsp1_uart2 {
> status = "okay";
> };
> @@ -185,6 +210,22 @@ gpio_keys_default: gpio-keys-default {
> bias-pull-up;
> };
>
> + touchscreen_default: touchscreen-default {
> + pins = "gpio13";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-pull-up;
> +
> + reset {
> + pins = "gpio12";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> + };
> +
> usb_id_default: usb-id-default {
> pins = "gpio110";
> function = "gpio";
> --
> 2.33.0
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-10-12 12:14 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-12 11:27 [PATCH v2 1/3] arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen J.R. Divya Antony
2021-10-12 11:27 ` [PATCH v2 2/3] arm64: dts: qcom: msm8916-asus-z00l: Add SDCard J.R. Divya Antony
2021-10-12 12:12 ` Stephan Gerhold
2021-10-12 11:27 ` [PATCH v2 3/3] arm64: dts: qcom: msm8916-asus-z00l: Add sensors J.R. Divya Antony
2021-10-12 12:14 ` Stephan Gerhold
2021-10-12 12:11 ` [PATCH v2 1/3] arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen Stephan Gerhold
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).