* [PATCH v2 1/2] bindings: pm8941-misc: Convert to YAML and add support for VBUS detection
2020-10-20 0:42 [PATCH v2 0/2] Add support for VBUS detection Guru Das Srinagesh
@ 2020-10-20 0:42 ` Guru Das Srinagesh
2020-10-20 0:42 ` [PATCH v2 2/2] extcon: qcom-spmi: Add " Guru Das Srinagesh
1 sibling, 0 replies; 3+ messages in thread
From: Guru Das Srinagesh @ 2020-10-20 0:42 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, linux-arm-msm, Stephen Boyd
Cc: Subbaraman Narayanamurthy, David Collins, linux-kernel,
Anirudh Ghayal, Guru Das Srinagesh
From: Anirudh Ghayal <aghayal@codeaurora.org>
Convert bindings to YAML. Also add compatible string that adds support
for reporting the VBUS status that can be detected via a dedicated PMIC
pin.
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
---
.../bindings/extcon/qcom,pm8941-misc.txt | 41 ----------------
.../bindings/extcon/qcom,pm8941-misc.yaml | 56 ++++++++++++++++++++++
2 files changed, 56 insertions(+), 41 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
create mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
deleted file mode 100644
index 35383adb..0000000
--- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Qualcomm's PM8941 USB ID Extcon device
-
-Some Qualcomm PMICs have a "misc" module that can be used to detect when
-the USB ID pin has been pulled low or high.
-
-PROPERTIES
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: Should contain "qcom,pm8941-misc";
-
-- reg:
- Usage: required
- Value type: <u32>
- Definition: Should contain the offset to the misc address space
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: Should contain the usb id interrupt
-
-- interrupt-names:
- Usage: required
- Value type: <stringlist>
- Definition: Should contain the string "usb_id" for the usb id interrupt
-
-Example:
-
- pmic {
- usb_id: misc@900 {
- compatible = "qcom,pm8941-misc";
- reg = <0x900>;
- interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
- interrupt-names = "usb_id";
- };
- }
-
- usb-controller {
- extcon = <&usb_id>;
- };
diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
new file mode 100644
index 0000000..9fbdb5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/qcom,pm8941-misc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's PM8941 USB ID Extcon device
+
+maintainers:
+ - Guru Das Srinagesh <gurus@codeaurora.org>
+
+description: |
+ Some Qualcomm PMICs have a "misc" module that can be used to detect when
+ the USB ID pin has been pulled low or high.
+
+properties:
+ compatible:
+ oneOf:
+ - const:
+ - qcom,pm8941-misc
+ - qcom,pmd-vbus-det
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 2
+
+ interrupt-names:
+ anyOf:
+ - const:
+ - usb_id
+ - usb_vbus
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ usb_id: misc@900 {
+ compatible = "qcom,pm8941-misc";
+ reg = <0x900>;
+ interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "usb_id";
+ };
+ }
+
+ usb-controller {
+ extcon = <&usb_id>;
+ };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH v2 2/2] extcon: qcom-spmi: Add support for VBUS detection
2020-10-20 0:42 [PATCH v2 0/2] Add support for VBUS detection Guru Das Srinagesh
2020-10-20 0:42 ` [PATCH v2 1/2] bindings: pm8941-misc: Convert to YAML and add " Guru Das Srinagesh
@ 2020-10-20 0:42 ` Guru Das Srinagesh
1 sibling, 0 replies; 3+ messages in thread
From: Guru Das Srinagesh @ 2020-10-20 0:42 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, linux-arm-msm, Stephen Boyd
Cc: Subbaraman Narayanamurthy, David Collins, linux-kernel,
Anirudh Ghayal, Kavya Nunna, Guru Das Srinagesh
From: Anirudh Ghayal <aghayal@codeaurora.org>
VBUS can be detected via a dedicated PMIC pin. Add support
for reporting the VBUS status.
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Kavya Nunna <knunna@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
---
drivers/extcon/extcon-qcom-spmi-misc.c | 100 ++++++++++++++++++++++++++-------
1 file changed, 81 insertions(+), 19 deletions(-)
diff --git a/drivers/extcon/extcon-qcom-spmi-misc.c b/drivers/extcon/extcon-qcom-spmi-misc.c
index 6b836ae..6bd6746 100644
--- a/drivers/extcon/extcon-qcom-spmi-misc.c
+++ b/drivers/extcon/extcon-qcom-spmi-misc.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/**
* extcon-qcom-spmi-misc.c - Qualcomm USB extcon driver to support USB ID
- * detection based on extcon-usb-gpio.c.
+ * and VBUS detection based on extcon-usb-gpio.c.
*
* Copyright (C) 2016 Linaro, Ltd.
* Stephen Boyd <stephen.boyd@linaro.org>
@@ -21,30 +21,56 @@
struct qcom_usb_extcon_info {
struct extcon_dev *edev;
- int irq;
+ int id_irq;
+ int vbus_irq;
struct delayed_work wq_detcable;
unsigned long debounce_jiffies;
};
static const unsigned int qcom_usb_extcon_cable[] = {
+ EXTCON_USB,
EXTCON_USB_HOST,
EXTCON_NONE,
};
static void qcom_usb_extcon_detect_cable(struct work_struct *work)
{
- bool id;
+ bool state = false;
int ret;
+ union extcon_property_value val;
struct qcom_usb_extcon_info *info = container_of(to_delayed_work(work),
struct qcom_usb_extcon_info,
wq_detcable);
- /* check ID and update cable state */
- ret = irq_get_irqchip_state(info->irq, IRQCHIP_STATE_LINE_LEVEL, &id);
- if (ret)
- return;
+ if (info->id_irq > 0) {
+ /* check ID and update cable state */
+ ret = irq_get_irqchip_state(info->id_irq,
+ IRQCHIP_STATE_LINE_LEVEL, &state);
+ if (ret)
+ return;
+
+ if (!state) {
+ val.intval = true;
+ extcon_set_property(info->edev, EXTCON_USB_HOST,
+ EXTCON_PROP_USB_SS, val);
+ }
+ extcon_set_state_sync(info->edev, EXTCON_USB_HOST, !state);
+ }
- extcon_set_state_sync(info->edev, EXTCON_USB_HOST, !id);
+ if (info->vbus_irq > 0) {
+ /* check VBUS and update cable state */
+ ret = irq_get_irqchip_state(info->vbus_irq,
+ IRQCHIP_STATE_LINE_LEVEL, &state);
+ if (ret)
+ return;
+
+ if (state) {
+ val.intval = true;
+ extcon_set_property(info->edev, EXTCON_USB,
+ EXTCON_PROP_USB_SS, val);
+ }
+ extcon_set_state_sync(info->edev, EXTCON_USB, state);
+ }
}
static irqreturn_t qcom_usb_irq_handler(int irq, void *dev_id)
@@ -79,21 +105,48 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
return ret;
}
+ ret = extcon_set_property_capability(info->edev,
+ EXTCON_USB, EXTCON_PROP_USB_SS);
+ ret |= extcon_set_property_capability(info->edev,
+ EXTCON_USB_HOST, EXTCON_PROP_USB_SS);
+ if (ret) {
+ dev_err(dev, "failed to register extcon props rc=%d\n",
+ ret);
+ return ret;
+ }
+
info->debounce_jiffies = msecs_to_jiffies(USB_ID_DEBOUNCE_MS);
INIT_DELAYED_WORK(&info->wq_detcable, qcom_usb_extcon_detect_cable);
- info->irq = platform_get_irq_byname(pdev, "usb_id");
- if (info->irq < 0)
- return info->irq;
+ info->id_irq = platform_get_irq_byname(pdev, "usb_id");
+ if (info->id_irq > 0) {
+ ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
+ qcom_usb_irq_handler,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ pdev->name, info);
+ if (ret < 0) {
+ dev_err(dev, "failed to request handler for ID IRQ\n");
+ return ret;
+ }
+ }
- ret = devm_request_threaded_irq(dev, info->irq, NULL,
+ info->vbus_irq = platform_get_irq_byname(pdev, "usb_vbus");
+ if (info->vbus_irq > 0) {
+ ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL,
qcom_usb_irq_handler,
IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
pdev->name, info);
- if (ret < 0) {
- dev_err(dev, "failed to request handler for ID IRQ\n");
- return ret;
+ if (ret < 0) {
+ dev_err(dev, "failed to request handler for VBUS IRQ\n");
+ return ret;
+ }
+ }
+
+ if (info->id_irq < 0 && info->vbus_irq < 0) {
+ dev_err(dev, "ID and VBUS IRQ not found\n");
+ return -EINVAL;
}
platform_set_drvdata(pdev, info);
@@ -120,8 +173,12 @@ static int qcom_usb_extcon_suspend(struct device *dev)
struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
int ret = 0;
- if (device_may_wakeup(dev))
- ret = enable_irq_wake(info->irq);
+ if (device_may_wakeup(dev)) {
+ if (info->id_irq > 0)
+ ret = enable_irq_wake(info->id_irq);
+ if (info->vbus_irq > 0)
+ ret = enable_irq_wake(info->vbus_irq);
+ }
return ret;
}
@@ -131,8 +188,12 @@ static int qcom_usb_extcon_resume(struct device *dev)
struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
int ret = 0;
- if (device_may_wakeup(dev))
- ret = disable_irq_wake(info->irq);
+ if (device_may_wakeup(dev)) {
+ if (info->id_irq > 0)
+ ret = disable_irq_wake(info->id_irq);
+ if (info->vbus_irq > 0)
+ ret = disable_irq_wake(info->vbus_irq);
+ }
return ret;
}
@@ -143,6 +204,7 @@ static SIMPLE_DEV_PM_OPS(qcom_usb_extcon_pm_ops,
static const struct of_device_id qcom_usb_extcon_dt_match[] = {
{ .compatible = "qcom,pm8941-misc", },
+ { .compatible = "qcom,pmd-vbus-det", },
{ }
};
MODULE_DEVICE_TABLE(of, qcom_usb_extcon_dt_match);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 3+ messages in thread