From: Taniya Das <tdas@codeaurora.org>
To: Rob Herring <robh@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
David Brown <david.brown@linaro.org>,
Rajendra Nayak <rnayak@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
Andy Gross <agross@kernel.org>,
devicetree@vger.kernel.org
Subject: Re: [PATCH v1 2/4] dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180
Date: Sun, 17 May 2020 14:50:41 +0530 [thread overview]
Message-ID: <c6800c88-c4cd-17bd-f32c-e980d896aaff@codeaurora.org> (raw)
In-Reply-To: <20200405020946.GA6110@bogus>
Hello Rob,
Thanks for the review.
On 4/5/2020 7:39 AM, Rob Herring wrote:
>> +
>> + reg:
>> + minItems: 1
>> + maxItems: 2
>
> Need to define what each one is when there are 2.
>
Yes will define them in the next patch.
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - clocks
>> + - clock-names
>> + - '#clock-cells'
>> + - '#power-domain-cells'
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/clock/qcom,gcc-sc7180.h>
>> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
>> + clock-controller@63000000 {
>> + compatible = "qcom,sc7180-lpasshm";
>> + reg = <0 0x63000000 0 0x28>;
>> + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>;
>> + clock-names = "gcc_lpass_sway";
>> + #clock-cells = <1>;
>> + #power-domain-cells = <1>;
>> + };
>> +
>> + - |
>> + clock-controller@62d00000 {
>> + compatible = "qcom,sc7180-lpasscorecc";
>> + reg = <0 0x62d00000 0 0x50000>,
>> + <0 0x62780000 0 0x30000>;
>> + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>;
>> + clock-names = "gcc_lpass_sway";
>> + power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
>> + #clock-cells = <1>;
>> + #power-domain-cells = <1>;
>> + };
>> +...
> /* GCC resets */
>> #define GCC_QUSB2PHY_PRIM_BCR 0
>> diff --git a/include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h b/include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
>> new file mode 100644
>> index 0000000..9466d5e
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
>> @@ -0,0 +1,28 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +#ifndef _DT_BINDINGS_CLK_QCOM_LPASS_CORE_CC_SC7180_H
>> +#define _DT_BINDINGS_CLK_QCOM_LPASS_CORE_CC_SC7180_H
>> +
>> +/* LPASS_CORE_CC clocks */
>> +#define LPASS_LPAAUDIO_DIG_PLL 0
>> +#define LPASS_LPAAUDIO_DIG_PLL_OUT_ODD 1
>> +#define CORE_CLK_SRC 2
>> +#define EXT_MCLK0_CLK_SRC 3
>> +#define LPAIF_PRI_CLK_SRC 4
>> +#define LPAIF_SEC_CLK_SRC 5
>> +#define LPASS_AUDIO_CORE_CORE_CLK 6
>> +#define LPASS_AUDIO_CORE_EXT_MCLK0_CLK 7
>> +#define LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK 8
>> +#define LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK 9
>> +#define LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK 10
>> +
>> +/* LPASS power domains */
>> +#define LPASS_CORE_HM_GDSCR 0
>> +
>> +#define LPASS_AUDIO_HM_GDSCR 0
>
> Kind of odd that 2 are the same value.
>
These GDSCs are from two different domains. I will update the comments
in the next patch.
>> +#define LPASS_PDC_HM_GDSCR 1
>> +
>> +#endif
>> --
>> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
>> of the Code Aurora Forum, hosted by the Linux Foundation.
>>
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
--
next prev parent reply other threads:[~2020-05-17 9:20 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-27 19:48 [PATCH v1 0/4] clk: qcom: Support for Low Power Audio Clocks on SC7180 Taniya Das
2020-03-27 19:48 ` [PATCH v1 1/4] clk: qcom: gdsc: Add support to enable retention of GSDCR Taniya Das
2020-04-09 20:06 ` Stephen Boyd
2020-05-17 9:17 ` Taniya Das
2020-03-27 19:48 ` [PATCH v1 2/4] dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180 Taniya Das
2020-04-05 2:09 ` Rob Herring
2020-05-17 9:20 ` Taniya Das [this message]
2020-03-27 19:48 ` [PATCH v1 3/4] clk: qcom: gcc: Add support for GCC LPASS clock for SC7180 Taniya Das
2020-04-09 20:08 ` Stephen Boyd
2020-03-27 19:48 ` [PATCH v1 4/4] clk: qcom: lpass: Add support for LPASS clock controller " Taniya Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c6800c88-c4cd-17bd-f32c-e980d896aaff@codeaurora.org \
--to=tdas@codeaurora.org \
--cc=agross@kernel.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=rnayak@codeaurora.org \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).