* [PATCH 0/8] Move Hikey 970 USB support out of staging and add DT
@ 2020-11-16 12:59 Mauro Carvalho Chehab
2020-11-16 12:59 ` [PATCH 2/8] spmi: hi6421-spmi-pmic: move driver from staging Mauro Carvalho Chehab
0 siblings, 1 reply; 3+ messages in thread
From: Mauro Carvalho Chehab @ 2020-11-16 12:59 UTC (permalink / raw)
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, John Stultz,
Manivannan Sadhasivam, Alex Dewar, Colin Ian King, Dan Carpenter,
Greg Kroah-Hartman, Kishon Vijay Abraham I, Krzysztof Kozlowski,
Lee Jones, Liam Girdwood, Mark Brown, Mayulong, Rob Herring,
Stephen Boyd, Vinod Koul, Wei Xu, Yu Chen, YueHaibing, devel,
devicetree, linux-arm-kernel, linux-arm-msm, linux-kernel
This patch series finish addressing support for Hikey 970
USB.
It moves the power management and USB3 drivers out of
staging, adding the device tree changes required for USB3
to work on Hikey 970.
Mauro Carvalho Chehab (8):
phy: phy-hi3670-usb3: move driver from staging into phy
spmi: hi6421-spmi-pmic: move driver from staging
mfd: hi6421-spmi-pmic: move driver from staging
regulator: hi6421v600-regulator: move it from staging
arm64: dts: hisilicon: hi3670.dtsi: add I2C settings
arm64: dts: hikey970-pinctrl.dtsi: add missing pinctrl settings
dts: hisilicon: add support for USB3 on Hikey 970
dts: hisilicon: add support for the PMIC found on Hikey 970
.../mfd/hisilicon,hi6421-spmi-pmic.yaml | 159 +++++
.../bindings/phy/phy-hi3670-usb3.yaml | 72 ++
.../spmi/hisilicon,hisi-spmi-controller.yaml | 62 ++
MAINTAINERS | 24 +-
.../boot/dts/hisilicon/hi3670-hikey970.dts | 124 +++-
arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 135 ++++
.../boot/dts/hisilicon/hikey970-pinctrl.dtsi | 548 +++++++++++++-
.../boot/dts/hisilicon/hikey970-pmic.dtsi | 197 +++++
drivers/mfd/Kconfig | 15 +
drivers/mfd/Makefile | 1 +
drivers/mfd/hi6421-spmi-pmic.c | 342 +++++++++
drivers/phy/hisilicon/Kconfig | 10 +
drivers/phy/hisilicon/Makefile | 1 +
drivers/phy/hisilicon/phy-hi3670-usb3.c | 671 ++++++++++++++++++
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/hi6421v600-regulator.c | 478 +++++++++++++
drivers/spmi/Kconfig | 9 +
drivers/spmi/Makefile | 1 +
drivers/spmi/hisi-spmi-controller.c | 358 ++++++++++
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/staging/hikey9xx/Kconfig | 49 --
drivers/staging/hikey9xx/Makefile | 7 -
drivers/staging/hikey9xx/TODO | 5 -
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 342 ---------
.../staging/hikey9xx/hi6421v600-regulator.c | 478 -------------
.../staging/hikey9xx/hisi-spmi-controller.c | 358 ----------
.../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml | 159 -----
.../hisilicon,hisi-spmi-controller.yaml | 62 --
drivers/staging/hikey9xx/phy-hi3670-usb3.c | 671 ------------------
drivers/staging/hikey9xx/phy-hi3670-usb3.yaml | 72 --
32 files changed, 3183 insertions(+), 2240 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3670-usb3.yaml
create mode 100644 Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
create mode 100644 drivers/phy/hisilicon/phy-hi3670-usb3.c
create mode 100644 drivers/regulator/hi6421v600-regulator.c
create mode 100644 drivers/spmi/hisi-spmi-controller.c
delete mode 100644 drivers/staging/hikey9xx/Kconfig
delete mode 100644 drivers/staging/hikey9xx/Makefile
delete mode 100644 drivers/staging/hikey9xx/TODO
delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
delete mode 100644 drivers/staging/hikey9xx/hi6421v600-regulator.c
delete mode 100644 drivers/staging/hikey9xx/hisi-spmi-controller.c
delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
delete mode 100644 drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml
delete mode 100644 drivers/staging/hikey9xx/phy-hi3670-usb3.c
delete mode 100644 drivers/staging/hikey9xx/phy-hi3670-usb3.yaml
--
2.28.0
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH 2/8] spmi: hi6421-spmi-pmic: move driver from staging
2020-11-16 12:59 [PATCH 0/8] Move Hikey 970 USB support out of staging and add DT Mauro Carvalho Chehab
@ 2020-11-16 12:59 ` Mauro Carvalho Chehab
2020-11-16 15:32 ` Rob Herring
0 siblings, 1 reply; 3+ messages in thread
From: Mauro Carvalho Chehab @ 2020-11-16 12:59 UTC (permalink / raw)
To: Rob Herring, Stephen Boyd
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, John Stultz,
Manivannan Sadhasivam, Colin Ian King, Dan Carpenter,
Greg Kroah-Hartman, Mayulong, YueHaibing, devel, devicetree,
linux-arm-msm, linux-kernel
The Hisilicon 6421v600 SPMI driver is ready for mainstream.
So, move it from staging.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../spmi/hisilicon,hisi-spmi-controller.yaml | 62 +++
MAINTAINERS | 7 +
drivers/spmi/Kconfig | 9 +
drivers/spmi/Makefile | 1 +
drivers/spmi/hisi-spmi-controller.c | 358 ++++++++++++++++++
drivers/staging/hikey9xx/Kconfig | 11 -
drivers/staging/hikey9xx/Makefile | 1 -
.../staging/hikey9xx/hisi-spmi-controller.c | 358 ------------------
.../hisilicon,hisi-spmi-controller.yaml | 62 ---
9 files changed, 437 insertions(+), 432 deletions(-)
create mode 100644 Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
create mode 100644 drivers/spmi/hisi-spmi-controller.c
delete mode 100644 drivers/staging/hikey9xx/hisi-spmi-controller.c
delete mode 100644 drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml
diff --git a/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
new file mode 100644
index 000000000000..f2a56fa4e78e
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon SPMI controller
+
+maintainers:
+ - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |
+ The HiSilicon SPMI BUS controller is found on some Kirin-based designs.
+ It is a MIPI System Power Management (SPMI) controller.
+
+ The PMIC part is provided by
+ drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
+
+properties:
+ $nodename:
+ pattern: "spmi@[0-9a-f]"
+
+ compatible:
+ const: hisilicon,kirin970-spmi-controller
+
+ reg:
+ maxItems: 1
+
+ spmi-channel:
+ description: |
+ number of the Kirin 970 SPMI channel where the SPMI devices are connected.
+
+required:
+ - compatible
+ - reg
+ - spmi-channel
+
+patternProperties:
+ "^pmic@[0-9a-f]$":
+ description: |
+ PMIC properties, which are specific to the used SPMI PMIC device(s).
+ When used in combination with HiSilicon 6421v600, the properties
+ are documented at
+ drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ spmi: spmi@fff24000 {
+ compatible = "hisilicon,kirin970-spmi-controller";
+ status = "ok";
+ reg = <0x0 0xfff24000 0x0 0x1000>;
+ spmi-channel = <2>;
+
+ pmic@0 {
+ /* pmic properties */
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 14266bb79ff8..14bc7b45ed50 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7987,6 +7987,13 @@ F: drivers/crypto/hisilicon/sec2/sec_crypto.c
F: drivers/crypto/hisilicon/sec2/sec_crypto.h
F: drivers/crypto/hisilicon/sec2/sec_main.c
+HISILICON SPMI CONTROLLER DRIVER FOR HIKEY 970
+M: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
+F: drivers/spmi/hisi-spmi-controller.c
+
HISILICON STAGING DRIVERS FOR HIKEY 960/970
M: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
L: devel@driverdev.osuosl.org
diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
index a53bad541f1a..2874b6c26028 100644
--- a/drivers/spmi/Kconfig
+++ b/drivers/spmi/Kconfig
@@ -11,6 +11,15 @@ menuconfig SPMI
if SPMI
+config SPMI_HISI3670
+ tristate "Hisilicon 3670 SPMI Controller"
+ select IRQ_DOMAIN_HIERARCHY
+ depends on HAS_IOMEM
+ help
+ If you say yes to this option, support will be included for the
+ built-in SPMI PMIC Arbiter interface on Hisilicon 3670
+ processors.
+
config SPMI_MSM_PMIC_ARB
tristate "Qualcomm MSM SPMI Controller (PMIC Arbiter)"
select IRQ_DOMAIN_HIERARCHY
diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
index 55a94cadeffe..6e092e6f290c 100644
--- a/drivers/spmi/Makefile
+++ b/drivers/spmi/Makefile
@@ -4,4 +4,5 @@
#
obj-$(CONFIG_SPMI) += spmi.o
+obj-$(CONFIG_SPMI_HISI3670) += hisi-spmi-controller.o
obj-$(CONFIG_SPMI_MSM_PMIC_ARB) += spmi-pmic-arb.o
diff --git a/drivers/spmi/hisi-spmi-controller.c b/drivers/spmi/hisi-spmi-controller.c
new file mode 100644
index 000000000000..f831c43f4783
--- /dev/null
+++ b/drivers/spmi/hisi-spmi-controller.c
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/spmi.h>
+
+/*
+ * SPMI register addr
+ */
+#define SPMI_CHANNEL_OFFSET 0x0300
+#define SPMI_SLAVE_OFFSET 0x20
+
+#define SPMI_APB_SPMI_CMD_BASE_ADDR 0x0100
+
+#define SPMI_APB_SPMI_WDATA0_BASE_ADDR 0x0104
+#define SPMI_APB_SPMI_WDATA1_BASE_ADDR 0x0108
+#define SPMI_APB_SPMI_WDATA2_BASE_ADDR 0x010c
+#define SPMI_APB_SPMI_WDATA3_BASE_ADDR 0x0110
+
+#define SPMI_APB_SPMI_STATUS_BASE_ADDR 0x0200
+
+#define SPMI_APB_SPMI_RDATA0_BASE_ADDR 0x0204
+#define SPMI_APB_SPMI_RDATA1_BASE_ADDR 0x0208
+#define SPMI_APB_SPMI_RDATA2_BASE_ADDR 0x020c
+#define SPMI_APB_SPMI_RDATA3_BASE_ADDR 0x0210
+
+#define SPMI_PER_DATAREG_BYTE 4
+/*
+ * SPMI cmd register
+ */
+#define SPMI_APB_SPMI_CMD_EN BIT(31)
+#define SPMI_APB_SPMI_CMD_TYPE_OFFSET 24
+#define SPMI_APB_SPMI_CMD_LENGTH_OFFSET 20
+#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET 16
+#define SPMI_APB_SPMI_CMD_ADDR_OFFSET 0
+
+/* Command Opcodes */
+
+enum spmi_controller_cmd_op_code {
+ SPMI_CMD_REG_ZERO_WRITE = 0,
+ SPMI_CMD_REG_WRITE = 1,
+ SPMI_CMD_REG_READ = 2,
+ SPMI_CMD_EXT_REG_WRITE = 3,
+ SPMI_CMD_EXT_REG_READ = 4,
+ SPMI_CMD_EXT_REG_WRITE_L = 5,
+ SPMI_CMD_EXT_REG_READ_L = 6,
+ SPMI_CMD_REG_RESET = 7,
+ SPMI_CMD_REG_SLEEP = 8,
+ SPMI_CMD_REG_SHUTDOWN = 9,
+ SPMI_CMD_REG_WAKEUP = 10,
+};
+
+/*
+ * SPMI status register
+ */
+#define SPMI_APB_TRANS_DONE BIT(0)
+#define SPMI_APB_TRANS_FAIL BIT(2)
+
+/* Command register fields */
+#define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT 16
+
+/* Maximum number of support PMIC peripherals */
+#define SPMI_CONTROLLER_TIMEOUT_US 1000
+#define SPMI_CONTROLLER_MAX_TRANS_BYTES 16
+
+struct spmi_controller_dev {
+ struct spmi_controller *controller;
+ struct device *dev;
+ void __iomem *base;
+ spinlock_t lock;
+ u32 channel;
+};
+
+static int spmi_controller_wait_for_done(struct device *dev,
+ struct spmi_controller_dev *ctrl_dev,
+ void __iomem *base, u8 sid, u16 addr)
+{
+ u32 timeout = SPMI_CONTROLLER_TIMEOUT_US;
+ u32 status, offset;
+
+ offset = SPMI_APB_SPMI_STATUS_BASE_ADDR;
+ offset += SPMI_CHANNEL_OFFSET * ctrl_dev->channel + SPMI_SLAVE_OFFSET * sid;
+
+ do {
+ status = readl(base + offset);
+
+ if (status & SPMI_APB_TRANS_DONE) {
+ if (status & SPMI_APB_TRANS_FAIL) {
+ dev_err(dev, "%s: transaction failed (0x%x)\n",
+ __func__, status);
+ return -EIO;
+ }
+ dev_dbg(dev, "%s: status 0x%x\n", __func__, status);
+ return 0;
+ }
+ udelay(1);
+ } while (timeout--);
+
+ dev_err(dev, "%s: timeout, status 0x%x\n", __func__, status);
+ return -ETIMEDOUT;
+}
+
+static int spmi_read_cmd(struct spmi_controller *ctrl,
+ u8 opc, u8 slave_id, u16 slave_addr, u8 *__buf, size_t bc)
+{
+ struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
+ u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
+ unsigned long flags;
+ u8 *buf = __buf;
+ u32 cmd, data;
+ int rc;
+ u8 op_code, i;
+
+ if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
+ dev_err(&ctrl->dev,
+ "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n",
+ SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
+ return -EINVAL;
+ }
+
+ switch (opc) {
+ case SPMI_CMD_READ:
+ op_code = SPMI_CMD_REG_READ;
+ break;
+ case SPMI_CMD_EXT_READ:
+ op_code = SPMI_CMD_EXT_REG_READ;
+ break;
+ case SPMI_CMD_EXT_READL:
+ op_code = SPMI_CMD_EXT_REG_READ_L;
+ break;
+ default:
+ dev_err(&ctrl->dev, "invalid read cmd 0x%x\n", opc);
+ return -EINVAL;
+ }
+
+ cmd = SPMI_APB_SPMI_CMD_EN |
+ (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
+ ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
+ ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */
+ ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */
+
+ spin_lock_irqsave(&spmi_controller->lock, flags);
+
+ writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
+
+ rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
+ spmi_controller->base, slave_id, slave_addr);
+ if (rc)
+ goto done;
+
+ for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) {
+ data = readl(spmi_controller->base + chnl_ofst +
+ SPMI_SLAVE_OFFSET * slave_id +
+ SPMI_APB_SPMI_RDATA0_BASE_ADDR +
+ i * SPMI_PER_DATAREG_BYTE);
+ data = be32_to_cpu((__be32)data);
+ if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
+ memcpy(buf, &data, sizeof(data));
+ buf += sizeof(data);
+ } else {
+ memcpy(buf, &data, bc % SPMI_PER_DATAREG_BYTE);
+ buf += (bc % SPMI_PER_DATAREG_BYTE);
+ }
+ }
+
+done:
+ spin_unlock_irqrestore(&spmi_controller->lock, flags);
+ if (rc)
+ dev_err(&ctrl->dev,
+ "spmi read wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n",
+ opc, slave_id, slave_addr, bc + 1);
+ else
+ dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, read value: %*ph\n",
+ __func__, slave_id, slave_addr, (int)bc, __buf);
+
+ return rc;
+}
+
+static int spmi_write_cmd(struct spmi_controller *ctrl,
+ u8 opc, u8 slave_id, u16 slave_addr, const u8 *__buf, size_t bc)
+{
+ struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
+ u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
+ const u8 *buf = __buf;
+ unsigned long flags;
+ u32 cmd, data;
+ int rc;
+ u8 op_code, i;
+
+ if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
+ dev_err(&ctrl->dev,
+ "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n",
+ SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
+ return -EINVAL;
+ }
+
+ switch (opc) {
+ case SPMI_CMD_WRITE:
+ op_code = SPMI_CMD_REG_WRITE;
+ break;
+ case SPMI_CMD_EXT_WRITE:
+ op_code = SPMI_CMD_EXT_REG_WRITE;
+ break;
+ case SPMI_CMD_EXT_WRITEL:
+ op_code = SPMI_CMD_EXT_REG_WRITE_L;
+ break;
+ default:
+ dev_err(&ctrl->dev, "invalid write cmd 0x%x\n", opc);
+ return -EINVAL;
+ }
+
+ cmd = SPMI_APB_SPMI_CMD_EN |
+ (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
+ ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
+ ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) |
+ ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET);
+
+ /* Write data to FIFOs */
+ spin_lock_irqsave(&spmi_controller->lock, flags);
+
+ for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) {
+ data = 0;
+ if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
+ memcpy(&data, buf, sizeof(data));
+ buf += sizeof(data);
+ } else {
+ memcpy(&data, buf, bc % SPMI_PER_DATAREG_BYTE);
+ buf += (bc % SPMI_PER_DATAREG_BYTE);
+ }
+
+ writel((u32)cpu_to_be32(data),
+ spmi_controller->base + chnl_ofst +
+ SPMI_APB_SPMI_WDATA0_BASE_ADDR +
+ SPMI_PER_DATAREG_BYTE * i);
+ }
+
+ /* Start the transaction */
+ writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
+
+ rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
+ spmi_controller->base, slave_id,
+ slave_addr);
+ spin_unlock_irqrestore(&spmi_controller->lock, flags);
+
+ if (rc)
+ dev_err(&ctrl->dev, "spmi write wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n",
+ opc, slave_id, slave_addr, bc);
+ else
+ dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, wrote value: %*ph\n",
+ __func__, slave_id, slave_addr, (int)bc, __buf);
+
+ return rc;
+}
+
+static int spmi_controller_probe(struct platform_device *pdev)
+{
+ struct spmi_controller_dev *spmi_controller;
+ struct spmi_controller *ctrl;
+ struct resource *iores;
+ int ret;
+
+ ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller));
+ if (!ctrl) {
+ dev_err(&pdev->dev, "can not allocate spmi_controller data\n");
+ return -ENOMEM;
+ }
+ spmi_controller = spmi_controller_get_drvdata(ctrl);
+ spmi_controller->controller = ctrl;
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores) {
+ dev_err(&pdev->dev, "can not get resource!\n");
+ return -EINVAL;
+ }
+
+ spmi_controller->base = devm_ioremap(&pdev->dev, iores->start,
+ resource_size(iores));
+ if (!spmi_controller->base) {
+ dev_err(&pdev->dev, "can not remap base addr!\n");
+ return -EADDRNOTAVAIL;
+ }
+
+ ret = of_property_read_u32(pdev->dev.of_node, "spmi-channel",
+ &spmi_controller->channel);
+ if (ret) {
+ dev_err(&pdev->dev, "can not get channel\n");
+ return -ENODEV;
+ }
+
+ platform_set_drvdata(pdev, spmi_controller);
+ dev_set_drvdata(&ctrl->dev, spmi_controller);
+
+ spin_lock_init(&spmi_controller->lock);
+
+ ctrl->nr = spmi_controller->channel;
+ ctrl->dev.parent = pdev->dev.parent;
+ ctrl->dev.of_node = of_node_get(pdev->dev.of_node);
+
+ /* Callbacks */
+ ctrl->read_cmd = spmi_read_cmd;
+ ctrl->write_cmd = spmi_write_cmd;
+
+ ret = spmi_controller_add(ctrl);
+ if (ret)
+ dev_err(&pdev->dev, "spmi_add_controller failed with error %d!\n", ret);
+
+ return ret;
+}
+
+static int spmi_del_controller(struct platform_device *pdev)
+{
+ struct spmi_controller *ctrl = platform_get_drvdata(pdev);
+
+ spmi_controller_remove(ctrl);
+ kfree(ctrl);
+ return 0;
+}
+
+static const struct of_device_id spmi_controller_match_table[] = {
+ {
+ .compatible = "hisilicon,kirin970-spmi-controller",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, spmi_controller_match_table);
+
+static struct platform_driver spmi_controller_driver = {
+ .probe = spmi_controller_probe,
+ .remove = spmi_del_controller,
+ .driver = {
+ .name = "hisi_spmi_controller",
+ .of_match_table = spmi_controller_match_table,
+ },
+};
+
+static int __init spmi_controller_init(void)
+{
+ return platform_driver_register(&spmi_controller_driver);
+}
+postcore_initcall(spmi_controller_init);
+
+static void __exit spmi_controller_exit(void)
+{
+ platform_driver_unregister(&spmi_controller_driver);
+}
+module_exit(spmi_controller_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("1.0");
+MODULE_ALIAS("platform:spmi_controller");
diff --git a/drivers/staging/hikey9xx/Kconfig b/drivers/staging/hikey9xx/Kconfig
index 0e97b5b9a56a..69392e42cd0d 100644
--- a/drivers/staging/hikey9xx/Kconfig
+++ b/drivers/staging/hikey9xx/Kconfig
@@ -1,16 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-# to be placed at drivers/spmi
-config SPMI_HISI3670
- tristate "Hisilicon 3670 SPMI Controller"
- select IRQ_DOMAIN_HIERARCHY
- depends on HAS_IOMEM
- depends on SPMI
- help
- If you say yes to this option, support will be included for the
- built-in SPMI PMIC Arbiter interface on Hisilicon 3670
- processors.
-
# to be placed at drivers/mfd
config MFD_HI6421_SPMI
tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
diff --git a/drivers/staging/hikey9xx/Makefile b/drivers/staging/hikey9xx/Makefile
index 9371dcc3d35b..347880fd378f 100644
--- a/drivers/staging/hikey9xx/Makefile
+++ b/drivers/staging/hikey9xx/Makefile
@@ -1,5 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_SPMI_HISI3670) += hisi-spmi-controller.o
obj-$(CONFIG_MFD_HI6421_SPMI) += hi6421-spmi-pmic.o
obj-$(CONFIG_REGULATOR_HI6421V600) += hi6421v600-regulator.o
diff --git a/drivers/staging/hikey9xx/hisi-spmi-controller.c b/drivers/staging/hikey9xx/hisi-spmi-controller.c
deleted file mode 100644
index f831c43f4783..000000000000
--- a/drivers/staging/hikey9xx/hisi-spmi-controller.c
+++ /dev/null
@@ -1,358 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/spmi.h>
-
-/*
- * SPMI register addr
- */
-#define SPMI_CHANNEL_OFFSET 0x0300
-#define SPMI_SLAVE_OFFSET 0x20
-
-#define SPMI_APB_SPMI_CMD_BASE_ADDR 0x0100
-
-#define SPMI_APB_SPMI_WDATA0_BASE_ADDR 0x0104
-#define SPMI_APB_SPMI_WDATA1_BASE_ADDR 0x0108
-#define SPMI_APB_SPMI_WDATA2_BASE_ADDR 0x010c
-#define SPMI_APB_SPMI_WDATA3_BASE_ADDR 0x0110
-
-#define SPMI_APB_SPMI_STATUS_BASE_ADDR 0x0200
-
-#define SPMI_APB_SPMI_RDATA0_BASE_ADDR 0x0204
-#define SPMI_APB_SPMI_RDATA1_BASE_ADDR 0x0208
-#define SPMI_APB_SPMI_RDATA2_BASE_ADDR 0x020c
-#define SPMI_APB_SPMI_RDATA3_BASE_ADDR 0x0210
-
-#define SPMI_PER_DATAREG_BYTE 4
-/*
- * SPMI cmd register
- */
-#define SPMI_APB_SPMI_CMD_EN BIT(31)
-#define SPMI_APB_SPMI_CMD_TYPE_OFFSET 24
-#define SPMI_APB_SPMI_CMD_LENGTH_OFFSET 20
-#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET 16
-#define SPMI_APB_SPMI_CMD_ADDR_OFFSET 0
-
-/* Command Opcodes */
-
-enum spmi_controller_cmd_op_code {
- SPMI_CMD_REG_ZERO_WRITE = 0,
- SPMI_CMD_REG_WRITE = 1,
- SPMI_CMD_REG_READ = 2,
- SPMI_CMD_EXT_REG_WRITE = 3,
- SPMI_CMD_EXT_REG_READ = 4,
- SPMI_CMD_EXT_REG_WRITE_L = 5,
- SPMI_CMD_EXT_REG_READ_L = 6,
- SPMI_CMD_REG_RESET = 7,
- SPMI_CMD_REG_SLEEP = 8,
- SPMI_CMD_REG_SHUTDOWN = 9,
- SPMI_CMD_REG_WAKEUP = 10,
-};
-
-/*
- * SPMI status register
- */
-#define SPMI_APB_TRANS_DONE BIT(0)
-#define SPMI_APB_TRANS_FAIL BIT(2)
-
-/* Command register fields */
-#define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT 16
-
-/* Maximum number of support PMIC peripherals */
-#define SPMI_CONTROLLER_TIMEOUT_US 1000
-#define SPMI_CONTROLLER_MAX_TRANS_BYTES 16
-
-struct spmi_controller_dev {
- struct spmi_controller *controller;
- struct device *dev;
- void __iomem *base;
- spinlock_t lock;
- u32 channel;
-};
-
-static int spmi_controller_wait_for_done(struct device *dev,
- struct spmi_controller_dev *ctrl_dev,
- void __iomem *base, u8 sid, u16 addr)
-{
- u32 timeout = SPMI_CONTROLLER_TIMEOUT_US;
- u32 status, offset;
-
- offset = SPMI_APB_SPMI_STATUS_BASE_ADDR;
- offset += SPMI_CHANNEL_OFFSET * ctrl_dev->channel + SPMI_SLAVE_OFFSET * sid;
-
- do {
- status = readl(base + offset);
-
- if (status & SPMI_APB_TRANS_DONE) {
- if (status & SPMI_APB_TRANS_FAIL) {
- dev_err(dev, "%s: transaction failed (0x%x)\n",
- __func__, status);
- return -EIO;
- }
- dev_dbg(dev, "%s: status 0x%x\n", __func__, status);
- return 0;
- }
- udelay(1);
- } while (timeout--);
-
- dev_err(dev, "%s: timeout, status 0x%x\n", __func__, status);
- return -ETIMEDOUT;
-}
-
-static int spmi_read_cmd(struct spmi_controller *ctrl,
- u8 opc, u8 slave_id, u16 slave_addr, u8 *__buf, size_t bc)
-{
- struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
- u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
- unsigned long flags;
- u8 *buf = __buf;
- u32 cmd, data;
- int rc;
- u8 op_code, i;
-
- if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
- dev_err(&ctrl->dev,
- "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n",
- SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
- return -EINVAL;
- }
-
- switch (opc) {
- case SPMI_CMD_READ:
- op_code = SPMI_CMD_REG_READ;
- break;
- case SPMI_CMD_EXT_READ:
- op_code = SPMI_CMD_EXT_REG_READ;
- break;
- case SPMI_CMD_EXT_READL:
- op_code = SPMI_CMD_EXT_REG_READ_L;
- break;
- default:
- dev_err(&ctrl->dev, "invalid read cmd 0x%x\n", opc);
- return -EINVAL;
- }
-
- cmd = SPMI_APB_SPMI_CMD_EN |
- (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
- ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
- ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */
- ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */
-
- spin_lock_irqsave(&spmi_controller->lock, flags);
-
- writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
-
- rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
- spmi_controller->base, slave_id, slave_addr);
- if (rc)
- goto done;
-
- for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) {
- data = readl(spmi_controller->base + chnl_ofst +
- SPMI_SLAVE_OFFSET * slave_id +
- SPMI_APB_SPMI_RDATA0_BASE_ADDR +
- i * SPMI_PER_DATAREG_BYTE);
- data = be32_to_cpu((__be32)data);
- if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
- memcpy(buf, &data, sizeof(data));
- buf += sizeof(data);
- } else {
- memcpy(buf, &data, bc % SPMI_PER_DATAREG_BYTE);
- buf += (bc % SPMI_PER_DATAREG_BYTE);
- }
- }
-
-done:
- spin_unlock_irqrestore(&spmi_controller->lock, flags);
- if (rc)
- dev_err(&ctrl->dev,
- "spmi read wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n",
- opc, slave_id, slave_addr, bc + 1);
- else
- dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, read value: %*ph\n",
- __func__, slave_id, slave_addr, (int)bc, __buf);
-
- return rc;
-}
-
-static int spmi_write_cmd(struct spmi_controller *ctrl,
- u8 opc, u8 slave_id, u16 slave_addr, const u8 *__buf, size_t bc)
-{
- struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
- u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
- const u8 *buf = __buf;
- unsigned long flags;
- u32 cmd, data;
- int rc;
- u8 op_code, i;
-
- if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
- dev_err(&ctrl->dev,
- "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n",
- SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
- return -EINVAL;
- }
-
- switch (opc) {
- case SPMI_CMD_WRITE:
- op_code = SPMI_CMD_REG_WRITE;
- break;
- case SPMI_CMD_EXT_WRITE:
- op_code = SPMI_CMD_EXT_REG_WRITE;
- break;
- case SPMI_CMD_EXT_WRITEL:
- op_code = SPMI_CMD_EXT_REG_WRITE_L;
- break;
- default:
- dev_err(&ctrl->dev, "invalid write cmd 0x%x\n", opc);
- return -EINVAL;
- }
-
- cmd = SPMI_APB_SPMI_CMD_EN |
- (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
- ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
- ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) |
- ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET);
-
- /* Write data to FIFOs */
- spin_lock_irqsave(&spmi_controller->lock, flags);
-
- for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) {
- data = 0;
- if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
- memcpy(&data, buf, sizeof(data));
- buf += sizeof(data);
- } else {
- memcpy(&data, buf, bc % SPMI_PER_DATAREG_BYTE);
- buf += (bc % SPMI_PER_DATAREG_BYTE);
- }
-
- writel((u32)cpu_to_be32(data),
- spmi_controller->base + chnl_ofst +
- SPMI_APB_SPMI_WDATA0_BASE_ADDR +
- SPMI_PER_DATAREG_BYTE * i);
- }
-
- /* Start the transaction */
- writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
-
- rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
- spmi_controller->base, slave_id,
- slave_addr);
- spin_unlock_irqrestore(&spmi_controller->lock, flags);
-
- if (rc)
- dev_err(&ctrl->dev, "spmi write wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n",
- opc, slave_id, slave_addr, bc);
- else
- dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, wrote value: %*ph\n",
- __func__, slave_id, slave_addr, (int)bc, __buf);
-
- return rc;
-}
-
-static int spmi_controller_probe(struct platform_device *pdev)
-{
- struct spmi_controller_dev *spmi_controller;
- struct spmi_controller *ctrl;
- struct resource *iores;
- int ret;
-
- ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller));
- if (!ctrl) {
- dev_err(&pdev->dev, "can not allocate spmi_controller data\n");
- return -ENOMEM;
- }
- spmi_controller = spmi_controller_get_drvdata(ctrl);
- spmi_controller->controller = ctrl;
-
- iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!iores) {
- dev_err(&pdev->dev, "can not get resource!\n");
- return -EINVAL;
- }
-
- spmi_controller->base = devm_ioremap(&pdev->dev, iores->start,
- resource_size(iores));
- if (!spmi_controller->base) {
- dev_err(&pdev->dev, "can not remap base addr!\n");
- return -EADDRNOTAVAIL;
- }
-
- ret = of_property_read_u32(pdev->dev.of_node, "spmi-channel",
- &spmi_controller->channel);
- if (ret) {
- dev_err(&pdev->dev, "can not get channel\n");
- return -ENODEV;
- }
-
- platform_set_drvdata(pdev, spmi_controller);
- dev_set_drvdata(&ctrl->dev, spmi_controller);
-
- spin_lock_init(&spmi_controller->lock);
-
- ctrl->nr = spmi_controller->channel;
- ctrl->dev.parent = pdev->dev.parent;
- ctrl->dev.of_node = of_node_get(pdev->dev.of_node);
-
- /* Callbacks */
- ctrl->read_cmd = spmi_read_cmd;
- ctrl->write_cmd = spmi_write_cmd;
-
- ret = spmi_controller_add(ctrl);
- if (ret)
- dev_err(&pdev->dev, "spmi_add_controller failed with error %d!\n", ret);
-
- return ret;
-}
-
-static int spmi_del_controller(struct platform_device *pdev)
-{
- struct spmi_controller *ctrl = platform_get_drvdata(pdev);
-
- spmi_controller_remove(ctrl);
- kfree(ctrl);
- return 0;
-}
-
-static const struct of_device_id spmi_controller_match_table[] = {
- {
- .compatible = "hisilicon,kirin970-spmi-controller",
- },
- {}
-};
-MODULE_DEVICE_TABLE(of, spmi_controller_match_table);
-
-static struct platform_driver spmi_controller_driver = {
- .probe = spmi_controller_probe,
- .remove = spmi_del_controller,
- .driver = {
- .name = "hisi_spmi_controller",
- .of_match_table = spmi_controller_match_table,
- },
-};
-
-static int __init spmi_controller_init(void)
-{
- return platform_driver_register(&spmi_controller_driver);
-}
-postcore_initcall(spmi_controller_init);
-
-static void __exit spmi_controller_exit(void)
-{
- platform_driver_unregister(&spmi_controller_driver);
-}
-module_exit(spmi_controller_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION("1.0");
-MODULE_ALIAS("platform:spmi_controller");
diff --git a/drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml b/drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml
deleted file mode 100644
index f2a56fa4e78e..000000000000
--- a/drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml
+++ /dev/null
@@ -1,62 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: HiSilicon SPMI controller
-
-maintainers:
- - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
-description: |
- The HiSilicon SPMI BUS controller is found on some Kirin-based designs.
- It is a MIPI System Power Management (SPMI) controller.
-
- The PMIC part is provided by
- drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
-
-properties:
- $nodename:
- pattern: "spmi@[0-9a-f]"
-
- compatible:
- const: hisilicon,kirin970-spmi-controller
-
- reg:
- maxItems: 1
-
- spmi-channel:
- description: |
- number of the Kirin 970 SPMI channel where the SPMI devices are connected.
-
-required:
- - compatible
- - reg
- - spmi-channel
-
-patternProperties:
- "^pmic@[0-9a-f]$":
- description: |
- PMIC properties, which are specific to the used SPMI PMIC device(s).
- When used in combination with HiSilicon 6421v600, the properties
- are documented at
- drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
-
-examples:
- - |
- bus {
- #address-cells = <2>;
- #size-cells = <2>;
-
- spmi: spmi@fff24000 {
- compatible = "hisilicon,kirin970-spmi-controller";
- status = "ok";
- reg = <0x0 0xfff24000 0x0 0x1000>;
- spmi-channel = <2>;
-
- pmic@0 {
- /* pmic properties */
- };
- };
- };
--
2.28.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 2/8] spmi: hi6421-spmi-pmic: move driver from staging
2020-11-16 12:59 ` [PATCH 2/8] spmi: hi6421-spmi-pmic: move driver from staging Mauro Carvalho Chehab
@ 2020-11-16 15:32 ` Rob Herring
0 siblings, 0 replies; 3+ messages in thread
From: Rob Herring @ 2020-11-16 15:32 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Rob Herring, YueHaibing, mauro.chehab, Dan Carpenter,
linux-kernel, linuxarm, devicetree, John Stultz, linux-arm-msm,
Colin Ian King, Greg Kroah-Hartman, Mayulong,
Manivannan Sadhasivam, Stephen Boyd, devel
On Mon, 16 Nov 2020 13:59:28 +0100, Mauro Carvalho Chehab wrote:
> The Hisilicon 6421v600 SPMI driver is ready for mainstream.
>
> So, move it from staging.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
> .../spmi/hisilicon,hisi-spmi-controller.yaml | 62 +++
> MAINTAINERS | 7 +
> drivers/spmi/Kconfig | 9 +
> drivers/spmi/Makefile | 1 +
> drivers/spmi/hisi-spmi-controller.c | 358 ++++++++++++++++++
> drivers/staging/hikey9xx/Kconfig | 11 -
> drivers/staging/hikey9xx/Makefile | 1 -
> .../staging/hikey9xx/hisi-spmi-controller.c | 358 ------------------
> .../hisilicon,hisi-spmi-controller.yaml | 62 ---
> 9 files changed, 437 insertions(+), 432 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
> create mode 100644 drivers/spmi/hisi-spmi-controller.c
> delete mode 100644 drivers/staging/hikey9xx/hisi-spmi-controller.c
> delete mode 100644 drivers/staging/hikey9xx/hisilicon,hisi-spmi-controller.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
./Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml:34:2: [warning] wrong indentation: expected 2 but found 1 (indentation)
dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml: 'additionalProperties' is a required property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml: ignoring, error in schema:
warning: no schema found in file: ./Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.example.dts:29.20-31.15: Warning (unit_address_vs_reg): /example-0/bus/spmi@fff24000/pmic@0: node has a unit name, but no reg or ranges property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.example.dt.yaml: spmi@fff24000: pmic@0: 'reg' is a required property
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/spmi.yaml
See https://patchwork.ozlabs.org/patch/1400897
The base for the patch is generally the last rc1. Any dependencies
should be noted.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-11-16 15:32 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-16 12:59 [PATCH 0/8] Move Hikey 970 USB support out of staging and add DT Mauro Carvalho Chehab
2020-11-16 12:59 ` [PATCH 2/8] spmi: hi6421-spmi-pmic: move driver from staging Mauro Carvalho Chehab
2020-11-16 15:32 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).