From: Christoph Hellwig <hch@lst.de>
To: tj@kernel.org, martin.petersen@oracle.com, axboe@kernel.dk
Cc: linux-ide@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-block@vger.kernel.org
Subject: [PATCH 3/7] libata: remove SCT WRITE SAME support
Date: Mon, 20 Mar 2017 16:43:15 -0400 [thread overview]
Message-ID: <20170320204319.12628-4-hch@lst.de> (raw)
In-Reply-To: <20170320204319.12628-1-hch@lst.de>
This was already disabled a while ago because it caused I/O errors,
and it's severly getting into the way of the discard / write zeroes
rework.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/ata/libata-scsi.c | 128 +++++++++++-----------------------------------
1 file changed, 29 insertions(+), 99 deletions(-)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 1ac70744ae7b..b93d7e33789a 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3393,46 +3393,6 @@ static size_t ata_format_dsm_trim_descr(struct scsi_cmnd *cmd, u32 trmax,
}
/**
- * ata_format_dsm_trim_descr() - SATL Write Same to ATA SCT Write Same
- * @cmd: SCSI command being translated
- * @lba: Starting sector
- * @num: Number of sectors to be zero'd.
- *
- * Rewrite the WRITE SAME payload to be an SCT Write Same formatted
- * descriptor.
- * NOTE: Writes a pattern (0's) in the foreground.
- *
- * Return: Number of bytes copied into sglist.
- */
-static size_t ata_format_sct_write_same(struct scsi_cmnd *cmd, u64 lba, u64 num)
-{
- struct scsi_device *sdp = cmd->device;
- size_t len = sdp->sector_size;
- size_t r;
- u16 *buf;
- unsigned long flags;
-
- spin_lock_irqsave(&ata_scsi_rbuf_lock, flags);
- buf = ((void *)ata_scsi_rbuf);
-
- put_unaligned_le16(0x0002, &buf[0]); /* SCT_ACT_WRITE_SAME */
- put_unaligned_le16(0x0101, &buf[1]); /* WRITE PTRN FG */
- put_unaligned_le64(lba, &buf[2]);
- put_unaligned_le64(num, &buf[6]);
- put_unaligned_le32(0u, &buf[10]); /* pattern */
-
- WARN_ON(len > ATA_SCSI_RBUF_SIZE);
-
- if (len > ATA_SCSI_RBUF_SIZE)
- len = ATA_SCSI_RBUF_SIZE;
-
- r = sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, len);
- spin_unlock_irqrestore(&ata_scsi_rbuf_lock, flags);
-
- return r;
-}
-
-/**
* ata_scsi_write_same_xlat() - SATL Write Same to ATA SCT Write Same
* @qc: Command to be translated
*
@@ -3468,26 +3428,17 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
}
scsi_16_lba_len(cdb, &block, &n_block);
- if (unmap) {
- /* If trim is not enabled the cmd is invalid. */
- if ((dev->horkage & ATA_HORKAGE_NOTRIM) ||
- !ata_id_has_trim(dev->id)) {
- fp = 1;
- bp = 3;
- goto invalid_fld;
- }
- /* If the request is too large the cmd is invalid */
- if (n_block > 0xffff * trmax) {
- fp = 2;
- goto invalid_fld;
- }
- } else {
- /* If write same is not available the cmd is invalid */
- if (!ata_id_sct_write_same(dev->id)) {
- fp = 1;
- bp = 3;
- goto invalid_fld;
- }
+ if (!unmap ||
+ (dev->horkage & ATA_HORKAGE_NOTRIM) ||
+ !ata_id_has_trim(dev->id)) {
+ fp = 1;
+ bp = 3;
+ goto invalid_fld;
+ }
+ /* If the request is too large the cmd is invalid */
+ if (n_block > 0xffff * trmax) {
+ fp = 2;
+ goto invalid_fld;
}
/*
@@ -3502,49 +3453,28 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
* For DATA SET MANAGEMENT TRIM in ACS-2 nsect (aka count)
* is defined as number of 512 byte blocks to be transferred.
*/
- if (unmap) {
- size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block);
- if (size != len)
- goto invalid_param_len;
- if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
- /* Newer devices support queued TRIM commands */
- tf->protocol = ATA_PROT_NCQ;
- tf->command = ATA_CMD_FPDMA_SEND;
- tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f;
- tf->nsect = qc->tag << 3;
- tf->hob_feature = (size / 512) >> 8;
- tf->feature = size / 512;
+ size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block);
+ if (size != len)
+ goto invalid_param_len;
- tf->auxiliary = 1;
- } else {
- tf->protocol = ATA_PROT_DMA;
- tf->hob_feature = 0;
- tf->feature = ATA_DSM_TRIM;
- tf->hob_nsect = (size / 512) >> 8;
- tf->nsect = size / 512;
- tf->command = ATA_CMD_DSM;
- }
- } else {
- size = ata_format_sct_write_same(scmd, block, n_block);
- if (size != len)
- goto invalid_param_len;
+ if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
+ /* Newer devices support queued TRIM commands */
+ tf->protocol = ATA_PROT_NCQ;
+ tf->command = ATA_CMD_FPDMA_SEND;
+ tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f;
+ tf->nsect = qc->tag << 3;
+ tf->hob_feature = (size / 512) >> 8;
+ tf->feature = size / 512;
- tf->hob_feature = 0;
- tf->feature = 0;
- tf->hob_nsect = 0;
- tf->nsect = 1;
- tf->lbah = 0;
- tf->lbam = 0;
- tf->lbal = ATA_CMD_STANDBYNOW1;
- tf->hob_lbah = 0;
- tf->hob_lbam = 0;
- tf->hob_lbal = 0;
- tf->device = ATA_CMD_STANDBYNOW1;
+ tf->auxiliary = 1;
+ } else {
tf->protocol = ATA_PROT_DMA;
- tf->command = ATA_CMD_WRITE_LOG_DMA_EXT;
- if (unlikely(dev->flags & ATA_DFLAG_PIO))
- tf->command = ATA_CMD_WRITE_LOG_EXT;
+ tf->hob_feature = 0;
+ tf->feature = ATA_DSM_TRIM;
+ tf->hob_nsect = (size / 512) >> 8;
+ tf->nsect = size / 512;
+ tf->command = ATA_CMD_DSM;
}
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 |
--
2.11.0
next prev parent reply other threads:[~2017-03-20 20:43 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-20 20:43 support ranges TRIM for libata Christoph Hellwig
2017-03-20 20:43 ` [PATCH 1/7] ѕd: split sd_setup_discard_cmnd Christoph Hellwig
2017-03-27 22:24 ` Bart Van Assche
2017-03-28 14:05 ` axboe
2017-03-30 8:49 ` hch
2017-03-20 20:43 ` [PATCH 2/7] sd: provide a new ata trim provisioning mode Christoph Hellwig
2017-03-27 22:40 ` Bart Van Assche
2017-03-20 20:43 ` Christoph Hellwig [this message]
2017-03-20 20:43 ` [PATCH 4/7] libata: simplify the trim implementation Christoph Hellwig
2017-03-20 20:43 ` [PATCH 5/7] block: add a max_discard_segment_size queue limit Christoph Hellwig
2017-03-27 23:09 ` Bart Van Assche
2017-03-20 20:43 ` [PATCH 6/7] sd: support multi-range TRIM for ATA disks Christoph Hellwig
2017-03-27 23:38 ` Bart Van Assche
2017-03-20 20:43 ` [PATCH 7/7] sd: use ZERO_PAGE for WRITE_SAME payloads Christoph Hellwig
2017-03-27 23:40 ` Bart Van Assche
2017-03-21 18:59 ` support ranges TRIM for libata Tejun Heo
2017-03-22 18:19 ` Christoph Hellwig
2017-03-23 13:47 ` James Bottomley
2017-03-23 13:55 ` Christoph Hellwig
2017-03-23 14:35 ` James Bottomley
2017-03-23 14:43 ` Christoph Hellwig
2017-03-23 15:04 ` Tejun Heo
2017-03-23 15:27 ` Christoph Hellwig
2017-03-23 15:30 ` Christoph Hellwig
2017-03-23 15:39 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170320204319.12628-4-hch@lst.de \
--to=hch@lst.de \
--cc=axboe@kernel.dk \
--cc=linux-block@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).