linux-block.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 04/16] block: sed-opal: close parameter list in cmd_finalize
@ 2018-11-08 21:50 David Kozub
  0 siblings, 0 replies; only message in thread
From: David Kozub @ 2018-11-08 21:50 UTC (permalink / raw)
  To: Jens Axboe, Scott Bauer, Jonathan Derrick, linux-block, linux-kernel
  Cc: Jonas Rabenstein

Every step ends by calling cmd_finalize (via finalize_and_send)
yet every step adds the token OPAL_ENDLIST on its own. Moving
this into cmd_finalize decreases code duplication.

Co-authored-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz>
Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
---
 block/sed-opal.c | 25 +++----------------------
 1 file changed, 3 insertions(+), 22 deletions(-)

diff --git a/block/sed-opal.c b/block/sed-opal.c
index 980705681806..35b1747b650f 100644
--- a/block/sed-opal.c
+++ b/block/sed-opal.c
@@ -661,6 +661,9 @@ static int cmd_finalize(struct opal_dev *cmd, u32 hsn, u32 tsn)
 	struct opal_header *hdr;
 	int err = 0;
 
+	/* close parameter list */
+	add_token_u8(&err, cmd, OPAL_ENDLIST);
+
 	add_token_u8(&err, cmd, OPAL_ENDOFDATA);
 	add_token_u8(&err, cmd, OPAL_STARTLIST);
 	add_token_u8(&err, cmd, 0);
@@ -1079,7 +1082,6 @@ static int gen_key(struct opal_dev *dev, void *data)
 	add_token_bytestring(&err, dev, opalmethod[OPAL_GENKEY],
 			     OPAL_UID_LENGTH);
 	add_token_u8(&err, dev, OPAL_STARTLIST);
-	add_token_u8(&err, dev, OPAL_ENDLIST);
 
 	if (err) {
 		pr_debug("Error building gen key command\n");
@@ -1142,7 +1144,6 @@ static int get_active_key(struct opal_dev *dev, void *data)
 	add_token_u8(&err, dev, 10); /* ActiveKey */
 	add_token_u8(&err, dev, OPAL_ENDNAME);
 	add_token_u8(&err, dev, OPAL_ENDLIST);
-	add_token_u8(&err, dev, OPAL_ENDLIST);
 	if (err) {
 		pr_debug("Error building get active key command\n");
 		return err;
@@ -1188,7 +1189,6 @@ static int generic_lr_enable_disable(struct opal_dev *dev,
 
 	add_token_u8(&err, dev, OPAL_ENDLIST);
 	add_token_u8(&err, dev, OPAL_ENDNAME);
-	add_token_u8(&err, dev, OPAL_ENDLIST);
 	return err;
 }
 
@@ -1254,8 +1254,6 @@ static int setup_locking_range(struct opal_dev *dev, void *data)
 
 		add_token_u8(&err, dev, OPAL_ENDLIST);
 		add_token_u8(&err, dev, OPAL_ENDNAME);
-		add_token_u8(&err, dev, OPAL_ENDLIST);
-
 	}
 	if (err) {
 		pr_debug("Error building Setup Locking range command.\n");
@@ -1295,7 +1293,6 @@ static int start_generic_opal_session(struct opal_dev *dev,
 
 	switch (auth) {
 	case OPAL_ANYBODY_UID:
-		add_token_u8(&err, dev, OPAL_ENDLIST);
 		break;
 	case OPAL_ADMIN1_UID:
 	case OPAL_SID_UID:
@@ -1308,7 +1305,6 @@ static int start_generic_opal_session(struct opal_dev *dev,
 		add_token_bytestring(&err, dev, opaluid[auth],
 				     OPAL_UID_LENGTH);
 		add_token_u8(&err, dev, OPAL_ENDNAME);
-		add_token_u8(&err, dev, OPAL_ENDLIST);
 		break;
 	default:
 		pr_debug("Cannot start Admin SP session with auth %d\n", auth);
@@ -1406,7 +1402,6 @@ static int start_auth_opal_session(struct opal_dev *dev, void *data)
 	add_token_u8(&err, dev, 3);
 	add_token_bytestring(&err, dev, lk_ul_user, OPAL_UID_LENGTH);
 	add_token_u8(&err, dev, OPAL_ENDNAME);
-	add_token_u8(&err, dev, OPAL_ENDLIST);
 
 	if (err) {
 		pr_debug("Error building STARTSESSION command.\n");
@@ -1429,7 +1424,6 @@ static int revert_tper(struct opal_dev *dev, void *data)
 	add_token_bytestring(&err, dev, opalmethod[OPAL_REVERT],
 			     OPAL_UID_LENGTH);
 	add_token_u8(&err, dev, OPAL_STARTLIST);
-	add_token_u8(&err, dev, OPAL_ENDLIST);
 	if (err) {
 		pr_debug("Error building REVERT TPER command.\n");
 		return err;
@@ -1463,7 +1457,6 @@ static int internal_activate_user(struct opal_dev *dev, void *data)
 	add_token_u8(&err, dev, OPAL_ENDNAME);
 	add_token_u8(&err, dev, OPAL_ENDLIST);
 	add_token_u8(&err, dev, OPAL_ENDNAME);
-	add_token_u8(&err, dev, OPAL_ENDLIST);
 
 	if (err) {
 		pr_debug("Error building Activate UserN command.\n");
@@ -1490,7 +1483,6 @@ static int erase_locking_range(struct opal_dev *dev, void *data)
 	add_token_bytestring(&err, dev, opalmethod[OPAL_ERASE],
 			     OPAL_UID_LENGTH);
 	add_token_u8(&err, dev, OPAL_STARTLIST);
-	add_token_u8(&err, dev, OPAL_ENDLIST);
 
 	if (err) {
 		pr_debug("Error building Erase Locking Range Command.\n");
@@ -1521,7 +1513,6 @@ static int set_mbr_done(struct opal_dev *dev, void *data)
 	add_token_u8(&err, dev, OPAL_ENDNAME);
 	add_token_u8(&err, dev, OPAL_ENDLIST);
 	add_token_u8(&err, dev, OPAL_ENDNAME);
-	add_token_u8(&err, dev, OPAL_ENDLIST);
 
 	if (err) {
 		pr_debug("Error Building set MBR Done command\n");
@@ -1553,7 +1544,6 @@ static int set_mbr_enable_disable(struct opal_dev *dev, void *data)
 	add_token_u8(&err, dev, OPAL_ENDNAME);
 	add_token_u8(&err, dev, OPAL_ENDLIST);
 	add_token_u8(&err, dev, OPAL_ENDNAME);
-	add_token_u8(&err, dev, OPAL_ENDLIST);
 
 	if (err) {
 		pr_debug("Error Building set MBR done command\n");
@@ -1585,7 +1575,6 @@ static int generic_pw_cmd(u8 *key, size_t key_len, u8 *cpin_uid,
 	add_token_u8(&err, dev, OPAL_ENDNAME);
 	add_token_u8(&err, dev, OPAL_ENDLIST);
 	add_token_u8(&err, dev, OPAL_ENDNAME);
-	add_token_u8(&err, dev, OPAL_ENDLIST);
 
 	return err;
 }
@@ -1694,7 +1683,6 @@ static int add_user_to_lr(struct opal_dev *dev, void *data)
 	add_token_u8(&err, dev, OPAL_ENDNAME);
 	add_token_u8(&err, dev, OPAL_ENDLIST);
 	add_token_u8(&err, dev, OPAL_ENDNAME);
-	add_token_u8(&err, dev, OPAL_ENDLIST);
 
 	if (err) {
 		pr_debug("Error building add user to locking range command.\n");
@@ -1755,7 +1743,6 @@ static int lock_unlock_locking_range(struct opal_dev *dev, void *data)
 
 	add_token_u8(&err, dev, OPAL_ENDLIST);
 	add_token_u8(&err, dev, OPAL_ENDNAME);
-	add_token_u8(&err, dev, OPAL_ENDLIST);
 
 	if (err) {
 		pr_debug("Error building SET command.\n");
@@ -1843,11 +1830,8 @@ static int activate_lsp(struct opal_dev *dev, void *data)
 		}
 		add_token_u8(&err, dev, OPAL_ENDLIST);
 		add_token_u8(&err, dev, OPAL_ENDNAME);
-		add_token_u8(&err, dev, OPAL_ENDLIST);
-
 	} else {
 		add_token_u8(&err, dev, OPAL_STARTLIST);
-		add_token_u8(&err, dev, OPAL_ENDLIST);
 	}
 
 	if (err) {
@@ -1904,7 +1888,6 @@ static int get_lsp_lifecycle(struct opal_dev *dev, void *data)
 	add_token_u8(&err, dev, 6); /* Lifecycle Column */
 	add_token_u8(&err, dev, OPAL_ENDNAME);
 
-	add_token_u8(&err, dev, OPAL_ENDLIST);
 	add_token_u8(&err, dev, OPAL_ENDLIST);
 
 	if (err) {
@@ -1964,8 +1947,6 @@ static int get_msid_cpin_pin(struct opal_dev *dev, void *data)
 	add_token_u8(&err, dev, 4); /* End Column */
 	add_token_u8(&err, dev, 3); /* Lifecycle Column */
 	add_token_u8(&err, dev, OPAL_ENDNAME);
-
-	add_token_u8(&err, dev, OPAL_ENDLIST);
 	add_token_u8(&err, dev, OPAL_ENDLIST);
 
 	if (err) {
-- 
2.20.1


^ permalink raw reply related	[flat|nested] only message in thread
only message in thread, other threads:[~2019-01-16 23:05 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-08 21:50 [PATCH 04/16] block: sed-opal: close parameter list in cmd_finalize David Kozub

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).