[PATCH AUTOSEL 4.14 099/371] block: don't use bio->bi_vcnt to figure out segment number

[PATCH AUTOSEL 4.14 099/371] block: don't use bio->bi_vcnt to figure out segment number

[Sasha Levin]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 1a67356e9a4829da2935dd338630a550c59c8489 ]

It is wrong to use bio->bi_vcnt to figure out how many segments
there are in the bio even though CLONED flag isn't set on this bio,
because this bio may be splitted or advanced.

So always use bio_segments() in blk_recount_segments(), and it shouldn't
cause any performance loss now because the physical segment number is figured
out in blk_queue_split() and BIO_SEG_VALID is set meantime since
bdced438acd83ad83a6c ("block: setup bi_phys_segments after splitting").

Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 76d8137a3113 ("blk-merge: recaculate segment if it isn't less than max segments")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-merge.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/block/blk-merge.c b/block/blk-merge.c
index f61b50a01bc7..415b5dafd9e6 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -299,13 +299,7 @@ void blk_recalc_rq_segments(struct request *rq)
 
 void blk_recount_segments(struct request_queue *q, struct bio *bio)
 {
-	unsigned short seg_cnt;
-
-	/* estimate segment number by bi_vcnt for non-cloned bio */
-	if (bio_flagged(bio, BIO_CLONED))
-		seg_cnt = bio_segments(bio);
-	else
-		seg_cnt = bio->bi_vcnt;
+	unsigned short seg_cnt = bio_segments(bio);
 
 	if (test_bit(QUEUE_FLAG_NO_SG_MERGE, &q->queue_flags) &&
 			(seg_cnt < queue_max_segments(q)))
-- 
2.20.1

[PATCH AUTOSEL 4.14 188/371] lightnvm: pblk: fix lock order in pblk_rb_tear_down_check

[Sasha Levin]

From: Igor Konopko <igor.j.konopko@intel.com>

[ Upstream commit 486b5aac85f6ec0b2df3e82a6a629d5eb7804db5 ]

In pblk_rb_tear_down_check() the spinlock functions are not
called in proper order.

Fixes: a4bd217 ("lightnvm: physical block device (pblk) target")
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/lightnvm/pblk-rb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/lightnvm/pblk-rb.c b/drivers/lightnvm/pblk-rb.c
index c0dd17a82170..73de2deaba67 100644
--- a/drivers/lightnvm/pblk-rb.c
+++ b/drivers/lightnvm/pblk-rb.c
@@ -825,8 +825,8 @@ int pblk_rb_tear_down_check(struct pblk_rb *rb)
 	}
 
 out:
-	spin_unlock(&rb->w_lock);
 	spin_unlock_irq(&rb->s_lock);
+	spin_unlock(&rb->w_lock);
 
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 270/371] signal: Allow cifs and drbd to receive their terminating signals

[Sasha Levin]

From: "Eric W. Biederman" <ebiederm@xmission.com>

[ Upstream commit 33da8e7c814f77310250bb54a9db36a44c5de784 ]

My recent to change to only use force_sig for a synchronous events
wound up breaking signal reception cifs and drbd.  I had overlooked
the fact that by default kthreads start out with all signals set to
SIG_IGN.  So a change I thought was safe turned out to have made it
impossible for those kernel thread to catch their signals.

Reverting the work on force_sig is a bad idea because what the code
was doing was very much a misuse of force_sig.  As the way force_sig
ultimately allowed the signal to happen was to change the signal
handler to SIG_DFL.  Which after the first signal will allow userspace
to send signals to these kernel threads.  At least for
wake_ack_receiver in drbd that does not appear actively wrong.

So correct this problem by adding allow_kernel_signal that will allow
signals whose siginfo reports they were sent by the kernel through,
but will not allow userspace generated signals, and update cifs and
drbd to call allow_kernel_signal in an appropriate place so that their
thread can receive this signal.

Fixing things this way ensures that userspace won't be able to send
signals and cause problems, that it is clear which signals the
threads are expecting to receive, and it guarantees that nothing
else in the system will be affected.

This change was partly inspired by similar cifs and drbd patches that
added allow_signal.

Reported-by: ronnie sahlberg <ronniesahlberg@gmail.com>
Reported-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Cc: Steve French <smfrench@gmail.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Fixes: 247bc9470b1e ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes")
Fixes: 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")
Fixes: fee109901f39 ("signal/drbd: Use send_sig not force_sig")
Fixes: 3cf5d076fb4d ("signal: Remove task parameter from force_sig")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/drbd/drbd_main.c |  2 ++
 fs/cifs/connect.c              |  2 +-
 include/linux/signal.h         | 15 ++++++++++++++-
 kernel/signal.c                |  5 +++++
 4 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 7ea13b5497fd..b998e3abca7a 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -334,6 +334,8 @@ static int drbd_thread_setup(void *arg)
 		 thi->name[0],
 		 resource->name);
 
+	allow_kernel_signal(DRBD_SIGKILL);
+	allow_kernel_signal(SIGXCPU);
 restart:
 	retval = thi->function(thi);
 
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index ed4a0352ea90..f0b1279a7de6 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -921,7 +921,7 @@ cifs_demultiplex_thread(void *p)
 		mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
 
 	set_freezable();
-	allow_signal(SIGKILL);
+	allow_kernel_signal(SIGKILL);
 	while (server->tcpStatus != CifsExiting) {
 		if (try_to_freeze())
 			continue;
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 843bd62b1ead..c4e3eb89a622 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -268,6 +268,9 @@ extern void signal_setup_done(int failed, struct ksignal *ksig, int stepping);
 extern void exit_signals(struct task_struct *tsk);
 extern void kernel_sigaction(int, __sighandler_t);
 
+#define SIG_KTHREAD ((__force __sighandler_t)2)
+#define SIG_KTHREAD_KERNEL ((__force __sighandler_t)3)
+
 static inline void allow_signal(int sig)
 {
 	/*
@@ -275,7 +278,17 @@ static inline void allow_signal(int sig)
 	 * know it'll be handled, so that they don't get converted to
 	 * SIGKILL or just silently dropped.
 	 */
-	kernel_sigaction(sig, (__force __sighandler_t)2);
+	kernel_sigaction(sig, SIG_KTHREAD);
+}
+
+static inline void allow_kernel_signal(int sig)
+{
+	/*
+	 * Kernel threads handle their own signals. Let the signal code
+	 * know signals sent by the kernel will be handled, so that they
+	 * don't get silently dropped.
+	 */
+	kernel_sigaction(sig, SIG_KTHREAD_KERNEL);
 }
 
 static inline void disallow_signal(int sig)
diff --git a/kernel/signal.c b/kernel/signal.c
index c9b203875001..8fee1f2eba2f 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -85,6 +85,11 @@ static int sig_task_ignored(struct task_struct *t, int sig, bool force)
 	    handler == SIG_DFL && !(force && sig_kernel_only(sig)))
 		return 1;
 
+	/* Only allow kernel generated signals to this kthread */
+	if (unlikely((t->flags & PF_KTHREAD) &&
+		     (handler == SIG_KTHREAD_KERNEL) && !force))
+		return true;
+
 	return sig_handler_ignored(handler, sig);
 }
 
-- 
2.20.1