* [PATCH AUTOSEL 4.19 04/32] null_blk: Fix the null_add_dev() error path
[not found] <20200410035005.9371-1-sashal@kernel.org>
@ 2020-04-10 3:49 ` Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 4.19 05/32] null_blk: Handle null_add_dev() failures properly Sasha Levin
` (4 subsequent siblings)
5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-04-10 3:49 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Bart Van Assche, Chaitanya Kulkarni, Johannes Thumshirn,
Hannes Reinecke, Ming Lei, Christoph Hellwig, Jens Axboe,
Sasha Levin, linux-block
From: Bart Van Assche <bvanassche@acm.org>
[ Upstream commit 2004bfdef945fe55196db6b9cdf321fbc75bb0de ]
If null_add_dev() fails, clear dev->nullb.
This patch fixes the following KASAN complaint:
BUG: KASAN: use-after-free in nullb_device_submit_queues_store+0xcf/0x160 [null_blk]
Read of size 8 at addr ffff88803280fc30 by task check/8409
Call Trace:
dump_stack+0xa5/0xe6
print_address_description.constprop.0+0x26/0x260
__kasan_report.cold+0x7b/0x99
kasan_report+0x16/0x20
__asan_load8+0x58/0x90
nullb_device_submit_queues_store+0xcf/0x160 [null_blk]
configfs_write_file+0x1c4/0x250 [configfs]
__vfs_write+0x4c/0x90
vfs_write+0x145/0x2c0
ksys_write+0xd7/0x180
__x64_sys_write+0x47/0x50
do_syscall_64+0x6f/0x2f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7ff370926317
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007fff2dd2da48 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007ff370926317
RDX: 0000000000000002 RSI: 0000559437ef23f0 RDI: 0000000000000001
RBP: 0000559437ef23f0 R08: 000000000000000a R09: 0000000000000001
R10: 0000559436703471 R11: 0000000000000246 R12: 0000000000000002
R13: 00007ff370a006a0 R14: 00007ff370a014a0 R15: 00007ff370a008a0
Allocated by task 8409:
save_stack+0x23/0x90
__kasan_kmalloc.constprop.0+0xcf/0xe0
kasan_kmalloc+0xd/0x10
kmem_cache_alloc_node_trace+0x129/0x4c0
null_add_dev+0x24a/0xe90 [null_blk]
nullb_device_power_store+0x1b6/0x270 [null_blk]
configfs_write_file+0x1c4/0x250 [configfs]
__vfs_write+0x4c/0x90
vfs_write+0x145/0x2c0
ksys_write+0xd7/0x180
__x64_sys_write+0x47/0x50
do_syscall_64+0x6f/0x2f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 8409:
save_stack+0x23/0x90
__kasan_slab_free+0x112/0x160
kasan_slab_free+0x12/0x20
kfree+0xdf/0x250
null_add_dev+0xaf3/0xe90 [null_blk]
nullb_device_power_store+0x1b6/0x270 [null_blk]
configfs_write_file+0x1c4/0x250 [configfs]
__vfs_write+0x4c/0x90
vfs_write+0x145/0x2c0
ksys_write+0xd7/0x180
__x64_sys_write+0x47/0x50
do_syscall_64+0x6f/0x2f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: 2984c8684f96 ("nullb: factor disk parameters")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/null_blk_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index c5c0b7c894815..002072429290e 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -1844,6 +1844,7 @@ static int null_add_dev(struct nullb_device *dev)
cleanup_queues(nullb);
out_free_nullb:
kfree(nullb);
+ dev->nullb = NULL;
out:
return rv;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH AUTOSEL 4.19 05/32] null_blk: Handle null_add_dev() failures properly
[not found] <20200410035005.9371-1-sashal@kernel.org>
2020-04-10 3:49 ` [PATCH AUTOSEL 4.19 04/32] null_blk: Fix the null_add_dev() error path Sasha Levin
@ 2020-04-10 3:49 ` Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 4.19 06/32] null_blk: fix spurious IO errors after failed past-wp access Sasha Levin
` (3 subsequent siblings)
5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-04-10 3:49 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Bart Van Assche, Chaitanya Kulkarni, Johannes Thumshirn,
Hannes Reinecke, Ming Lei, Christoph Hellwig, Jens Axboe,
Sasha Levin, linux-block
From: Bart Van Assche <bvanassche@acm.org>
[ Upstream commit 9b03b713082a31a5b90e0a893c72aa620e255c26 ]
If null_add_dev() fails then null_del_dev() is called with a NULL argument.
Make null_del_dev() handle this scenario correctly. This patch fixes the
following KASAN complaint:
null-ptr-deref in null_del_dev+0x28/0x280 [null_blk]
Read of size 8 at addr 0000000000000000 by task find/1062
Call Trace:
dump_stack+0xa5/0xe6
__kasan_report.cold+0x65/0x99
kasan_report+0x16/0x20
__asan_load8+0x58/0x90
null_del_dev+0x28/0x280 [null_blk]
nullb_group_drop_item+0x7e/0xa0 [null_blk]
client_drop_item+0x53/0x80 [configfs]
configfs_rmdir+0x395/0x4e0 [configfs]
vfs_rmdir+0xb6/0x220
do_rmdir+0x238/0x2c0
__x64_sys_unlinkat+0x75/0x90
do_syscall_64+0x6f/0x2f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/null_blk_main.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index 002072429290e..78355a0e61db6 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -1480,7 +1480,12 @@ static void cleanup_queues(struct nullb *nullb)
static void null_del_dev(struct nullb *nullb)
{
- struct nullb_device *dev = nullb->dev;
+ struct nullb_device *dev;
+
+ if (!nullb)
+ return;
+
+ dev = nullb->dev;
ida_simple_remove(&nullb_indexes, nullb->index);
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH AUTOSEL 4.19 06/32] null_blk: fix spurious IO errors after failed past-wp access
[not found] <20200410035005.9371-1-sashal@kernel.org>
2020-04-10 3:49 ` [PATCH AUTOSEL 4.19 04/32] null_blk: Fix the null_add_dev() error path Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 4.19 05/32] null_blk: Handle null_add_dev() failures properly Sasha Levin
@ 2020-04-10 3:49 ` Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 4.19 09/32] block: keep bdi->io_pages in sync with max_sectors_kb for stacked devices Sasha Levin
` (2 subsequent siblings)
5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-04-10 3:49 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Alexey Dobriyan, Christoph Hellwig, Jens Axboe, Sasha Levin, linux-block
From: Alexey Dobriyan <adobriyan@gmail.com>
[ Upstream commit ff77042296d0a54535ddf74412c5ae92cb4ec76a ]
Steps to reproduce:
BLKRESETZONE zone 0
// force EIO
pwrite(fd, buf, 4096, 4096);
[issue more IO including zone ioctls]
It will start failing randomly including IO to unrelated zones because of
->error "reuse". Trigger can be partition detection as well if test is not
run immediately which is even more entertaining.
The fix is of course to clear ->error where necessary.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/null_blk_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index 78355a0e61db6..d2d7dc9cd58d2 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -571,6 +571,7 @@ static struct nullb_cmd *__alloc_cmd(struct nullb_queue *nq)
if (tag != -1U) {
cmd = &nq->cmds[tag];
cmd->tag = tag;
+ cmd->error = BLK_STS_OK;
cmd->nq = nq;
if (nq->dev->irqmode == NULL_IRQ_TIMER) {
hrtimer_init(&cmd->timer, CLOCK_MONOTONIC,
@@ -1433,6 +1434,7 @@ static blk_status_t null_queue_rq(struct blk_mq_hw_ctx *hctx,
cmd->timer.function = null_cmd_timer_expired;
}
cmd->rq = bd->rq;
+ cmd->error = BLK_STS_OK;
cmd->nq = nq;
blk_mq_start_request(bd->rq);
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH AUTOSEL 4.19 09/32] block: keep bdi->io_pages in sync with max_sectors_kb for stacked devices
[not found] <20200410035005.9371-1-sashal@kernel.org>
` (2 preceding siblings ...)
2020-04-10 3:49 ` [PATCH AUTOSEL 4.19 06/32] null_blk: fix spurious IO errors after failed past-wp access Sasha Levin
@ 2020-04-10 3:49 ` Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 4.19 21/32] block: Fix use-after-free issue accessing struct io_cq Sasha Levin
2020-04-10 3:50 ` [PATCH AUTOSEL 4.19 28/32] block, bfq: fix use-after-free in bfq_idle_slice_timer_body Sasha Levin
5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-04-10 3:49 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Konstantin Khlebnikov, Paul Menzel, Bob Liu, Song Liu,
Sasha Levin, linux-block
From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
[ Upstream commit e74d93e96d721c4297f2a900ad0191890d2fc2b0 ]
Field bdi->io_pages added in commit 9491ae4aade6 ("mm: don't cap request
size based on read-ahead setting") removes unneeded split of read requests.
Stacked drivers do not call blk_queue_max_hw_sectors(). Instead they set
limits of their devices by blk_set_stacking_limits() + disk_stack_limits().
Field bio->io_pages stays zero until user set max_sectors_kb via sysfs.
This patch updates io_pages after merging limits in disk_stack_limits().
Commit c6d6e9b0f6b4 ("dm: do not allow readahead to limit IO size") fixed
the same problem for device-mapper devices, this one fixes MD RAIDs.
Fixes: 9491ae4aade6 ("mm: don't cap request size based on read-ahead setting")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/blk-settings.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/block/blk-settings.c b/block/blk-settings.c
index be9b39caadbd2..01093b8f3e624 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -717,6 +717,9 @@ void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
printk(KERN_NOTICE "%s: Warning: Device %s is misaligned\n",
top, bottom);
}
+
+ t->backing_dev_info->io_pages =
+ t->limits.max_sectors >> (PAGE_SHIFT - 9);
}
EXPORT_SYMBOL(disk_stack_limits);
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH AUTOSEL 4.19 21/32] block: Fix use-after-free issue accessing struct io_cq
[not found] <20200410035005.9371-1-sashal@kernel.org>
` (3 preceding siblings ...)
2020-04-10 3:49 ` [PATCH AUTOSEL 4.19 09/32] block: keep bdi->io_pages in sync with max_sectors_kb for stacked devices Sasha Levin
@ 2020-04-10 3:49 ` Sasha Levin
2020-04-10 3:50 ` [PATCH AUTOSEL 4.19 28/32] block, bfq: fix use-after-free in bfq_idle_slice_timer_body Sasha Levin
5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-04-10 3:49 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sahitya Tummala, Pradeep P V K, Jens Axboe, Sasha Levin, linux-block
From: Sahitya Tummala <stummala@codeaurora.org>
[ Upstream commit 30a2da7b7e225ef6c87a660419ea04d3cef3f6a7 ]
There is a potential race between ioc_release_fn() and
ioc_clear_queue() as shown below, due to which below kernel
crash is observed. It also can result into use-after-free
issue.
context#1: context#2:
ioc_release_fn() __ioc_clear_queue() gets the same icq
->spin_lock(&ioc->lock); ->spin_lock(&ioc->lock);
->ioc_destroy_icq(icq);
->list_del_init(&icq->q_node);
->call_rcu(&icq->__rcu_head,
icq_free_icq_rcu);
->spin_unlock(&ioc->lock);
->ioc_destroy_icq(icq);
->hlist_del_init(&icq->ioc_node);
This results into below crash as this memory
is now used by icq->__rcu_head in context#1.
There is a chance that icq could be free'd
as well.
22150.386550: <6> Unable to handle kernel write to read-only memory
at virtual address ffffffaa8d31ca50
...
Call trace:
22150.607350: <2> ioc_destroy_icq+0x44/0x110
22150.611202: <2> ioc_clear_queue+0xac/0x148
22150.615056: <2> blk_cleanup_queue+0x11c/0x1a0
22150.619174: <2> __scsi_remove_device+0xdc/0x128
22150.623465: <2> scsi_forget_host+0x2c/0x78
22150.627315: <2> scsi_remove_host+0x7c/0x2a0
22150.631257: <2> usb_stor_disconnect+0x74/0xc8
22150.635371: <2> usb_unbind_interface+0xc8/0x278
22150.639665: <2> device_release_driver_internal+0x198/0x250
22150.644897: <2> device_release_driver+0x24/0x30
22150.649176: <2> bus_remove_device+0xec/0x140
22150.653204: <2> device_del+0x270/0x460
22150.656712: <2> usb_disable_device+0x120/0x390
22150.660918: <2> usb_disconnect+0xf4/0x2e0
22150.664684: <2> hub_event+0xd70/0x17e8
22150.668197: <2> process_one_work+0x210/0x480
22150.672222: <2> worker_thread+0x32c/0x4c8
Fix this by adding a new ICQ_DESTROYED flag in ioc_destroy_icq() to
indicate this icq is once marked as destroyed. Also, ensure
__ioc_clear_queue() is accessing icq within rcu_read_lock/unlock so
that icq doesn't get free'd up while it is still using it.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Co-developed-by: Pradeep P V K <ppvk@codeaurora.org>
Signed-off-by: Pradeep P V K <ppvk@codeaurora.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/blk-ioc.c | 7 +++++++
include/linux/iocontext.h | 1 +
2 files changed, 8 insertions(+)
diff --git a/block/blk-ioc.c b/block/blk-ioc.c
index 01580f88fcb39..4c810969c3e2f 100644
--- a/block/blk-ioc.c
+++ b/block/blk-ioc.c
@@ -87,6 +87,7 @@ static void ioc_destroy_icq(struct io_cq *icq)
* making it impossible to determine icq_cache. Record it in @icq.
*/
icq->__rcu_icq_cache = et->icq_cache;
+ icq->flags |= ICQ_DESTROYED;
call_rcu(&icq->__rcu_head, icq_free_icq_rcu);
}
@@ -230,15 +231,21 @@ static void __ioc_clear_queue(struct list_head *icq_list)
{
unsigned long flags;
+ rcu_read_lock();
while (!list_empty(icq_list)) {
struct io_cq *icq = list_entry(icq_list->next,
struct io_cq, q_node);
struct io_context *ioc = icq->ioc;
spin_lock_irqsave(&ioc->lock, flags);
+ if (icq->flags & ICQ_DESTROYED) {
+ spin_unlock_irqrestore(&ioc->lock, flags);
+ continue;
+ }
ioc_destroy_icq(icq);
spin_unlock_irqrestore(&ioc->lock, flags);
}
+ rcu_read_unlock();
}
/**
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index dba15ca8e60bc..1dcd9198beb7f 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -8,6 +8,7 @@
enum {
ICQ_EXITED = 1 << 2,
+ ICQ_DESTROYED = 1 << 3,
};
/*
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH AUTOSEL 4.19 28/32] block, bfq: fix use-after-free in bfq_idle_slice_timer_body
[not found] <20200410035005.9371-1-sashal@kernel.org>
` (4 preceding siblings ...)
2020-04-10 3:49 ` [PATCH AUTOSEL 4.19 21/32] block: Fix use-after-free issue accessing struct io_cq Sasha Levin
@ 2020-04-10 3:50 ` Sasha Levin
5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-04-10 3:50 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Zhiqiang Liu, Paolo Valente, Wang Wang, Feilong Lin, Jens Axboe,
Sasha Levin, linux-block
From: Zhiqiang Liu <liuzhiqiang26@huawei.com>
[ Upstream commit 2f95fa5c955d0a9987ffdc3a095e2f4e62c5f2a9 ]
In bfq_idle_slice_timer func, bfqq = bfqd->in_service_queue is
not in bfqd-lock critical section. The bfqq, which is not
equal to NULL in bfq_idle_slice_timer, may be freed after passing
to bfq_idle_slice_timer_body. So we will access the freed memory.
In addition, considering the bfqq may be in race, we should
firstly check whether bfqq is in service before doing something
on it in bfq_idle_slice_timer_body func. If the bfqq in race is
not in service, it means the bfqq has been expired through
__bfq_bfqq_expire func, and wait_request flags has been cleared in
__bfq_bfqd_reset_in_service func. So we do not need to re-clear the
wait_request of bfqq which is not in service.
KASAN log is given as follows:
[13058.354613] ==================================================================
[13058.354640] BUG: KASAN: use-after-free in bfq_idle_slice_timer+0xac/0x290
[13058.354644] Read of size 8 at addr ffffa02cf3e63f78 by task fork13/19767
[13058.354646]
[13058.354655] CPU: 96 PID: 19767 Comm: fork13
[13058.354661] Call trace:
[13058.354667] dump_backtrace+0x0/0x310
[13058.354672] show_stack+0x28/0x38
[13058.354681] dump_stack+0xd8/0x108
[13058.354687] print_address_description+0x68/0x2d0
[13058.354690] kasan_report+0x124/0x2e0
[13058.354697] __asan_load8+0x88/0xb0
[13058.354702] bfq_idle_slice_timer+0xac/0x290
[13058.354707] __hrtimer_run_queues+0x298/0x8b8
[13058.354710] hrtimer_interrupt+0x1b8/0x678
[13058.354716] arch_timer_handler_phys+0x4c/0x78
[13058.354722] handle_percpu_devid_irq+0xf0/0x558
[13058.354731] generic_handle_irq+0x50/0x70
[13058.354735] __handle_domain_irq+0x94/0x110
[13058.354739] gic_handle_irq+0x8c/0x1b0
[13058.354742] el1_irq+0xb8/0x140
[13058.354748] do_wp_page+0x260/0xe28
[13058.354752] __handle_mm_fault+0x8ec/0x9b0
[13058.354756] handle_mm_fault+0x280/0x460
[13058.354762] do_page_fault+0x3ec/0x890
[13058.354765] do_mem_abort+0xc0/0x1b0
[13058.354768] el0_da+0x24/0x28
[13058.354770]
[13058.354773] Allocated by task 19731:
[13058.354780] kasan_kmalloc+0xe0/0x190
[13058.354784] kasan_slab_alloc+0x14/0x20
[13058.354788] kmem_cache_alloc_node+0x130/0x440
[13058.354793] bfq_get_queue+0x138/0x858
[13058.354797] bfq_get_bfqq_handle_split+0xd4/0x328
[13058.354801] bfq_init_rq+0x1f4/0x1180
[13058.354806] bfq_insert_requests+0x264/0x1c98
[13058.354811] blk_mq_sched_insert_requests+0x1c4/0x488
[13058.354818] blk_mq_flush_plug_list+0x2d4/0x6e0
[13058.354826] blk_flush_plug_list+0x230/0x548
[13058.354830] blk_finish_plug+0x60/0x80
[13058.354838] read_pages+0xec/0x2c0
[13058.354842] __do_page_cache_readahead+0x374/0x438
[13058.354846] ondemand_readahead+0x24c/0x6b0
[13058.354851] page_cache_sync_readahead+0x17c/0x2f8
[13058.354858] generic_file_buffered_read+0x588/0xc58
[13058.354862] generic_file_read_iter+0x1b4/0x278
[13058.354965] ext4_file_read_iter+0xa8/0x1d8 [ext4]
[13058.354972] __vfs_read+0x238/0x320
[13058.354976] vfs_read+0xbc/0x1c0
[13058.354980] ksys_read+0xdc/0x1b8
[13058.354984] __arm64_sys_read+0x50/0x60
[13058.354990] el0_svc_common+0xb4/0x1d8
[13058.354994] el0_svc_handler+0x50/0xa8
[13058.354998] el0_svc+0x8/0xc
[13058.354999]
[13058.355001] Freed by task 19731:
[13058.355007] __kasan_slab_free+0x120/0x228
[13058.355010] kasan_slab_free+0x10/0x18
[13058.355014] kmem_cache_free+0x288/0x3f0
[13058.355018] bfq_put_queue+0x134/0x208
[13058.355022] bfq_exit_icq_bfqq+0x164/0x348
[13058.355026] bfq_exit_icq+0x28/0x40
[13058.355030] ioc_exit_icq+0xa0/0x150
[13058.355035] put_io_context_active+0x250/0x438
[13058.355038] exit_io_context+0xd0/0x138
[13058.355045] do_exit+0x734/0xc58
[13058.355050] do_group_exit+0x78/0x220
[13058.355054] __wake_up_parent+0x0/0x50
[13058.355058] el0_svc_common+0xb4/0x1d8
[13058.355062] el0_svc_handler+0x50/0xa8
[13058.355066] el0_svc+0x8/0xc
[13058.355067]
[13058.355071] The buggy address belongs to the object at ffffa02cf3e63e70#012 which belongs to the cache bfq_queue of size 464
[13058.355075] The buggy address is located 264 bytes inside of#012 464-byte region [ffffa02cf3e63e70, ffffa02cf3e64040)
[13058.355077] The buggy address belongs to the page:
[13058.355083] page:ffff7e80b3cf9800 count:1 mapcount:0 mapping:ffff802db5c90780 index:0xffffa02cf3e606f0 compound_mapcount: 0
[13058.366175] flags: 0x2ffffe0000008100(slab|head)
[13058.370781] raw: 2ffffe0000008100 ffff7e80b53b1408 ffffa02d730c1c90 ffff802db5c90780
[13058.370787] raw: ffffa02cf3e606f0 0000000000370023 00000001ffffffff 0000000000000000
[13058.370789] page dumped because: kasan: bad access detected
[13058.370791]
[13058.370792] Memory state around the buggy address:
[13058.370797] ffffa02cf3e63e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb
[13058.370801] ffffa02cf3e63e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370805] >ffffa02cf3e63f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370808] ^
[13058.370811] ffffa02cf3e63f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370815] ffffa02cf3e64000: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[13058.370817] ==================================================================
[13058.370820] Disabling lock debugging due to kernel taint
Here, we directly pass the bfqd to bfq_idle_slice_timer_body func.
--
V2->V3: rewrite the comment as suggested by Paolo Valente
V1->V2: add one comment, and add Fixes and Reported-by tag.
Fixes: aee69d78d ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Reported-by: Wang Wang <wangwang2@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Feilong Lin <linfeilong@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/bfq-iosched.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 66b1ebc21ce4f..5198ed1b36690 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -5156,20 +5156,28 @@ static struct bfq_queue *bfq_init_rq(struct request *rq)
return bfqq;
}
-static void bfq_idle_slice_timer_body(struct bfq_queue *bfqq)
+static void
+bfq_idle_slice_timer_body(struct bfq_data *bfqd, struct bfq_queue *bfqq)
{
- struct bfq_data *bfqd = bfqq->bfqd;
enum bfqq_expiration reason;
unsigned long flags;
spin_lock_irqsave(&bfqd->lock, flags);
- bfq_clear_bfqq_wait_request(bfqq);
+ /*
+ * Considering that bfqq may be in race, we should firstly check
+ * whether bfqq is in service before doing something on it. If
+ * the bfqq in race is not in service, it has already been expired
+ * through __bfq_bfqq_expire func and its wait_request flags has
+ * been cleared in __bfq_bfqd_reset_in_service func.
+ */
if (bfqq != bfqd->in_service_queue) {
spin_unlock_irqrestore(&bfqd->lock, flags);
return;
}
+ bfq_clear_bfqq_wait_request(bfqq);
+
if (bfq_bfqq_budget_timeout(bfqq))
/*
* Also here the queue can be safely expired
@@ -5214,7 +5222,7 @@ static enum hrtimer_restart bfq_idle_slice_timer(struct hrtimer *timer)
* early.
*/
if (bfqq)
- bfq_idle_slice_timer_body(bfqq);
+ bfq_idle_slice_timer_body(bfqd, bfqq);
return HRTIMER_NORESTART;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-04-10 3:55 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20200410035005.9371-1-sashal@kernel.org>
2020-04-10 3:49 ` [PATCH AUTOSEL 4.19 04/32] null_blk: Fix the null_add_dev() error path Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 4.19 05/32] null_blk: Handle null_add_dev() failures properly Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 4.19 06/32] null_blk: fix spurious IO errors after failed past-wp access Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 4.19 09/32] block: keep bdi->io_pages in sync with max_sectors_kb for stacked devices Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 4.19 21/32] block: Fix use-after-free issue accessing struct io_cq Sasha Levin
2020-04-10 3:50 ` [PATCH AUTOSEL 4.19 28/32] block, bfq: fix use-after-free in bfq_idle_slice_timer_body Sasha Levin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).