linux-block.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/4] Include zone in pstore_device_info
@ 2021-06-15 21:21 Kees Cook
  2021-06-15 21:21 ` [PATCH v2 1/4] pstore/blk: Improve failure reporting Kees Cook
                   ` (3 more replies)
  0 siblings, 4 replies; 10+ messages in thread
From: Kees Cook @ 2021-06-15 21:21 UTC (permalink / raw)
  To: linux-kernel
  Cc: Kees Cook, Christoph Hellwig, Al Viro, gmpy.liaowx,
	Anton Vorontsov, Colin Cross, Tony Luck, Jonathan Corbet,
	Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	linux-doc, linux-mtd, linux-block, linux-fsdevel

Hi,

This fixes up pstore/blk to avoid touching block internals, and includes
additional fixes.

-Kees

v1: https://lore.kernel.org/lkml/20210614200421.2702002-1-keescook@chromium.org

Kees Cook (4):
  pstore/blk: Improve failure reporting
  pstore/blk: Use the normal block device I/O path
  pstore/blk: Include zone in pstore_device_info
  pstore/blk: Fix kerndoc and redundancy on blkdev param

 Documentation/admin-guide/pstore-blk.rst |  14 +-
 drivers/mtd/mtdpstore.c                  |  10 +-
 fs/pstore/blk.c                          | 371 ++++++++---------------
 include/linux/pstore_blk.h               |  27 +-
 4 files changed, 141 insertions(+), 281 deletions(-)

-- 
2.25.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 1/4] pstore/blk: Improve failure reporting
  2021-06-15 21:21 [PATCH v2 0/4] Include zone in pstore_device_info Kees Cook
@ 2021-06-15 21:21 ` Kees Cook
  2021-06-16  3:51   ` Christoph Hellwig
  2021-06-15 21:21 ` [PATCH v2 2/4] pstore/blk: Use the normal block device I/O path Kees Cook
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 10+ messages in thread
From: Kees Cook @ 2021-06-15 21:21 UTC (permalink / raw)
  To: linux-kernel
  Cc: Kees Cook, Christoph Hellwig, Al Viro, gmpy.liaowx,
	Anton Vorontsov, Colin Cross, Tony Luck, Jonathan Corbet,
	Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	linux-doc, linux-mtd, linux-block, linux-fsdevel

There was no feedback on bad registration attempts. Add details on the
failure cause.

Signed-off-by: Kees Cook <keescook@chromium.org>
---
 fs/pstore/blk.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/fs/pstore/blk.c b/fs/pstore/blk.c
index 4bb8a344957a..91d7a848c85b 100644
--- a/fs/pstore/blk.c
+++ b/fs/pstore/blk.c
@@ -114,8 +114,19 @@ static int __register_pstore_device(struct pstore_device_info *dev)
 
 	lockdep_assert_held(&pstore_blk_lock);
 
-	if (!dev || !dev->total_size || !dev->read || !dev->write)
+	if (!dev || !dev->total_size || !dev->read || !dev->write) {
+		if (!dev)
+			pr_err("NULL device info\n");
+		else {
+			if (!dev->total_size)
+				pr_err("zero sized device\n");
+			if (!dev->read)
+				pr_err("no read handler for device\n");
+			if (!dev->write)
+				pr_err("no write handler for device\n");
+		}
 		return -EINVAL;
+	}
 
 	/* someone already registered before */
 	if (pstore_zone_info)
-- 
2.25.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 2/4] pstore/blk: Use the normal block device I/O path
  2021-06-15 21:21 [PATCH v2 0/4] Include zone in pstore_device_info Kees Cook
  2021-06-15 21:21 ` [PATCH v2 1/4] pstore/blk: Improve failure reporting Kees Cook
@ 2021-06-15 21:21 ` Kees Cook
  2021-06-16  3:52   ` Christoph Hellwig
  2021-06-15 21:21 ` [PATCH v2 3/4] pstore/blk: Include zone in pstore_device_info Kees Cook
  2021-06-15 21:21 ` [PATCH v2 4/4] pstore/blk: Fix kerndoc and redundancy on blkdev param Kees Cook
  3 siblings, 1 reply; 10+ messages in thread
From: Kees Cook @ 2021-06-15 21:21 UTC (permalink / raw)
  To: linux-kernel
  Cc: Kees Cook, Christoph Hellwig, Al Viro, gmpy.liaowx,
	Anton Vorontsov, Colin Cross, Tony Luck, Jonathan Corbet,
	Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	linux-doc, linux-mtd, linux-block, linux-fsdevel

Stop poking into block layer internals and just open the block device
file an use kernel_read and kernel_write on it. Note that this means
the transformation from name_to_dev_t can't be used anymore when
pstore_blk is loaded as a module: a full filesystem device path name
must be used instead.

Co-developed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
 fs/pstore/blk.c | 261 +++++++++++++++---------------------------------
 1 file changed, 80 insertions(+), 181 deletions(-)

diff --git a/fs/pstore/blk.c b/fs/pstore/blk.c
index 91d7a848c85b..8f5bd656cc2d 100644
--- a/fs/pstore/blk.c
+++ b/fs/pstore/blk.c
@@ -8,15 +8,16 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include "../../block/blk.h"
 #include <linux/blkdev.h>
 #include <linux/string.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/pstore_blk.h>
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/init_syscalls.h>
 #include <linux/mount.h>
-#include <linux/uio.h>
 
 static long kmsg_size = CONFIG_PSTORE_BLK_KMSG_SIZE;
 module_param(kmsg_size, long, 0400);
@@ -60,23 +61,25 @@ MODULE_PARM_DESC(best_effort, "use best effort to write (i.e. do not require sto
  *
  * Usually, this will be a partition of a block device.
  *
- * blkdev accepts the following variants:
- * 1) <hex_major><hex_minor> device number in hexadecimal representation,
- *    with no leading 0x, for example b302.
- * 2) /dev/<disk_name> represents the device number of disk
- * 3) /dev/<disk_name><decimal> represents the device number
+ * blkdev accepts the following variants, when built as a module:
+ * 1) /dev/<disk_name> represents the device number of disk
+ * 2) /dev/<disk_name><decimal> represents the device number
  *    of partition - device number of disk plus the partition number
- * 4) /dev/<disk_name>p<decimal> - same as the above, that form is
+ * 3) /dev/<disk_name>p<decimal> - same as the above, that form is
  *    used when disk name of partitioned disk ends on a digit.
- * 5) PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF representing the
+ *
+ * blkdev accepts the following variants when built into the kernel:
+ * 1) <hex_major><hex_minor> device number in hexadecimal representation,
+ *    with no leading 0x, for example b302.
+ * 2) PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF representing the
  *    unique id of a partition if the partition table provides it.
  *    The UUID may be either an EFI/GPT UUID, or refer to an MSDOS
  *    partition using the format SSSSSSSS-PP, where SSSSSSSS is a zero-
  *    filled hex representation of the 32-bit "NT disk signature", and PP
  *    is a zero-filled hex representation of the 1-based partition number.
- * 6) PARTUUID=<UUID>/PARTNROFF=<int> to select a partition in relation to
+ * 3) PARTUUID=<UUID>/PARTNROFF=<int> to select a partition in relation to
  *    a partition with a known unique id.
- * 7) <major>:<minor> major and minor number of the device separated by
+ * 4) <major>:<minor> major and minor number of the device separated by
  *    a colon.
  */
 static char blkdev[80] = CONFIG_PSTORE_BLK_BLKDEV;
@@ -88,15 +91,9 @@ MODULE_PARM_DESC(blkdev, "block device for pstore storage");
  * during the register/unregister functions.
  */
 static DEFINE_MUTEX(pstore_blk_lock);
-static struct block_device *psblk_bdev;
+static struct file *psblk_file;
 static struct pstore_zone_info *pstore_zone_info;
 
-struct bdev_info {
-	dev_t devt;
-	sector_t nr_sects;
-	sector_t start_sect;
-};
-
 #define check_size(name, alignsize) ({				\
 	long _##name_ = (name);					\
 	_##name_ = _##name_ <= 0 ? 0 : (_##name_ * 1024);	\
@@ -216,203 +213,70 @@ void unregister_pstore_device(struct pstore_device_info *dev)
 }
 EXPORT_SYMBOL_GPL(unregister_pstore_device);
 
-/**
- * psblk_get_bdev() - open block device
- *
- * @holder:	Exclusive holder identifier
- * @info:	Information about bdev to fill in
- *
- * Return: pointer to block device on success and others on error.
- *
- * On success, the returned block_device has reference count of one.
- */
-static struct block_device *psblk_get_bdev(void *holder,
-					   struct bdev_info *info)
-{
-	struct block_device *bdev = ERR_PTR(-ENODEV);
-	fmode_t mode = FMODE_READ | FMODE_WRITE;
-	sector_t nr_sects;
-
-	lockdep_assert_held(&pstore_blk_lock);
-
-	if (pstore_zone_info)
-		return ERR_PTR(-EBUSY);
-
-	if (!blkdev[0])
-		return ERR_PTR(-ENODEV);
-
-	if (holder)
-		mode |= FMODE_EXCL;
-	bdev = blkdev_get_by_path(blkdev, mode, holder);
-	if (IS_ERR(bdev)) {
-		dev_t devt;
-
-		devt = name_to_dev_t(blkdev);
-		if (devt == 0)
-			return ERR_PTR(-ENODEV);
-		bdev = blkdev_get_by_dev(devt, mode, holder);
-		if (IS_ERR(bdev))
-			return bdev;
-	}
-
-	nr_sects = bdev_nr_sectors(bdev);
-	if (!nr_sects) {
-		pr_err("not enough space for '%s'\n", blkdev);
-		blkdev_put(bdev, mode);
-		return ERR_PTR(-ENOSPC);
-	}
-
-	if (info) {
-		info->devt = bdev->bd_dev;
-		info->nr_sects = nr_sects;
-		info->start_sect = get_start_sect(bdev);
-	}
-
-	return bdev;
-}
-
-static void psblk_put_bdev(struct block_device *bdev, void *holder)
-{
-	fmode_t mode = FMODE_READ | FMODE_WRITE;
-
-	lockdep_assert_held(&pstore_blk_lock);
-
-	if (!bdev)
-		return;
-
-	if (holder)
-		mode |= FMODE_EXCL;
-	blkdev_put(bdev, mode);
-}
-
 static ssize_t psblk_generic_blk_read(char *buf, size_t bytes, loff_t pos)
 {
-	struct block_device *bdev = psblk_bdev;
-	struct file file;
-	struct kiocb kiocb;
-	struct iov_iter iter;
-	struct kvec iov = {.iov_base = buf, .iov_len = bytes};
-
-	if (!bdev)
-		return -ENODEV;
-
-	memset(&file, 0, sizeof(struct file));
-	file.f_mapping = bdev->bd_inode->i_mapping;
-	file.f_flags = O_DSYNC | __O_SYNC | O_NOATIME;
-	file.f_inode = bdev->bd_inode;
-	file_ra_state_init(&file.f_ra, file.f_mapping);
-
-	init_sync_kiocb(&kiocb, &file);
-	kiocb.ki_pos = pos;
-	iov_iter_kvec(&iter, READ, &iov, 1, bytes);
-
-	return generic_file_read_iter(&kiocb, &iter);
+	return kernel_read(psblk_file, buf, bytes, &pos);
 }
 
 static ssize_t psblk_generic_blk_write(const char *buf, size_t bytes,
 		loff_t pos)
 {
-	struct block_device *bdev = psblk_bdev;
-	struct iov_iter iter;
-	struct kiocb kiocb;
-	struct file file;
-	ssize_t ret;
-	struct kvec iov = {.iov_base = (void *)buf, .iov_len = bytes};
-
-	if (!bdev)
-		return -ENODEV;
-
 	/* Console/Ftrace backend may handle buffer until flush dirty zones */
 	if (in_interrupt() || irqs_disabled())
 		return -EBUSY;
-
-	memset(&file, 0, sizeof(struct file));
-	file.f_mapping = bdev->bd_inode->i_mapping;
-	file.f_flags = O_DSYNC | __O_SYNC | O_NOATIME;
-	file.f_inode = bdev->bd_inode;
-
-	init_sync_kiocb(&kiocb, &file);
-	kiocb.ki_pos = pos;
-	iov_iter_kvec(&iter, WRITE, &iov, 1, bytes);
-
-	inode_lock(bdev->bd_inode);
-	ret = generic_write_checks(&kiocb, &iter);
-	if (ret > 0)
-		ret = generic_perform_write(&file, &iter, pos);
-	inode_unlock(bdev->bd_inode);
-
-	if (likely(ret > 0)) {
-		const struct file_operations f_op = {.fsync = blkdev_fsync};
-
-		file.f_op = &f_op;
-		kiocb.ki_pos += ret;
-		ret = generic_write_sync(&kiocb, ret);
-	}
-	return ret;
+	return kernel_write(psblk_file, buf, bytes, &pos);
 }
 
 /*
  * This takes its configuration only from the module parameters now.
- * See psblk_get_bdev() and blkdev.
  */
-static int __register_pstore_blk(void)
+static int __register_pstore_blk(const char *devpath)
 {
-	char bdev_name[BDEVNAME_SIZE];
-	struct block_device *bdev;
-	struct pstore_device_info dev;
-	struct bdev_info binfo;
-	void *holder = blkdev;
+	struct pstore_device_info dev = {
+		.read = psblk_generic_blk_read,
+		.write = psblk_generic_blk_write,
+	};
 	int ret = -ENODEV;
 
 	lockdep_assert_held(&pstore_blk_lock);
 
-	/* hold bdev exclusively */
-	memset(&binfo, 0, sizeof(binfo));
-	bdev = psblk_get_bdev(holder, &binfo);
-	if (IS_ERR(bdev)) {
-		pr_err("failed to open '%s'!\n", blkdev);
-		return PTR_ERR(bdev);
+	psblk_file = filp_open(devpath, O_RDWR | O_DSYNC | O_NOATIME | O_EXCL, 0);
+	if (IS_ERR(psblk_file)) {
+		ret = PTR_ERR(psblk_file);
+		pr_err("failed to open '%s': %d!\n", devpath, ret);
+		goto err;
 	}
 
-	/* only allow driver matching the @blkdev */
-	if (!binfo.devt) {
-		pr_debug("no major\n");
-		ret = -ENODEV;
-		goto err_put_bdev;
+	if (!S_ISBLK(file_inode(psblk_file)->i_mode)) {
+		pr_err("'%s' is not block device!\n", devpath);
+		goto err_fput;
 	}
 
-	/* psblk_bdev must be assigned before register to pstore/blk */
-	psblk_bdev = bdev;
-
-	memset(&dev, 0, sizeof(dev));
-	dev.total_size = binfo.nr_sects << SECTOR_SHIFT;
-	dev.read = psblk_generic_blk_read;
-	dev.write = psblk_generic_blk_write;
+	dev.total_size = i_size_read(I_BDEV(psblk_file->f_mapping->host)->bd_inode);
 
 	ret = __register_pstore_device(&dev);
 	if (ret)
-		goto err_put_bdev;
+		goto err_fput;
 
-	bdevname(bdev, bdev_name);
-	pr_info("attached %s (no dedicated panic_write!)\n", bdev_name);
 	return 0;
 
-err_put_bdev:
-	psblk_bdev = NULL;
-	psblk_put_bdev(bdev, holder);
+err_fput:
+	fput(psblk_file);
+err:
+	psblk_file = NULL;
+
 	return ret;
 }
 
-static void __unregister_pstore_blk(unsigned int major)
+static void __unregister_pstore_blk(struct file *device)
 {
 	struct pstore_device_info dev = { .read = psblk_generic_blk_read };
-	void *holder = blkdev;
 
 	lockdep_assert_held(&pstore_blk_lock);
-	if (psblk_bdev && MAJOR(psblk_bdev->bd_dev) == major) {
+	if (psblk_file && psblk_file == device) {
 		__unregister_pstore_device(&dev);
-		psblk_put_bdev(psblk_bdev, holder);
-		psblk_bdev = NULL;
+		fput(psblk_file);
+		psblk_file = NULL;
 	}
 }
 
@@ -430,13 +294,48 @@ int pstore_blk_get_config(struct pstore_blk_config *info)
 }
 EXPORT_SYMBOL_GPL(pstore_blk_get_config);
 
+
+#ifndef MODULE
+static const char devname[] = "/dev/pstore-blk";
+static __init const char *early_boot_devpath(const char *initial_devname)
+{
+	/*
+	 * During early boot the real root file system hasn't been
+	 * mounted yet, and no device nodes are present yet. Use the
+	 * same scheme to find the device that we use for mounting
+	 * the root file system.
+	 */
+	dev_t dev = name_to_dev_t(initial_devname);
+
+	if (!dev) {
+		pr_err("failed to resolve '%s'!\n", initial_devname);
+		return initial_devname;
+	}
+
+	init_unlink(devname);
+	init_mknod(devname, S_IFBLK | 0600, new_encode_dev(dev));
+
+	return devname;
+}
+#else
+static inline const char *early_boot_devpath(const char *initial_devname)
+{
+	return initial_devname;
+}
+#endif
+
 static int __init pstore_blk_init(void)
 {
 	int ret = 0;
 
 	mutex_lock(&pstore_blk_lock);
-	if (!pstore_zone_info && best_effort && blkdev[0])
-		ret = __register_pstore_blk();
+	if (!pstore_zone_info && best_effort && blkdev[0]) {
+		ret = __register_pstore_blk(early_boot_devpath(blkdev));
+		if (ret == 0 && pstore_zone_info)
+			pr_info("attached %s:%s (%zu) (no dedicated panic_write!)\n",
+				pstore_zone_info->name, blkdev,
+				pstore_zone_info->total_size);
+	}
 	mutex_unlock(&pstore_blk_lock);
 
 	return ret;
@@ -446,8 +345,8 @@ late_initcall(pstore_blk_init);
 static void __exit pstore_blk_exit(void)
 {
 	mutex_lock(&pstore_blk_lock);
-	if (psblk_bdev)
-		__unregister_pstore_blk(MAJOR(psblk_bdev->bd_dev));
+	if (psblk_file)
+		__unregister_pstore_blk(psblk_file);
 	else {
 		struct pstore_device_info dev = { };
 
-- 
2.25.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 3/4] pstore/blk: Include zone in pstore_device_info
  2021-06-15 21:21 [PATCH v2 0/4] Include zone in pstore_device_info Kees Cook
  2021-06-15 21:21 ` [PATCH v2 1/4] pstore/blk: Improve failure reporting Kees Cook
  2021-06-15 21:21 ` [PATCH v2 2/4] pstore/blk: Use the normal block device I/O path Kees Cook
@ 2021-06-15 21:21 ` Kees Cook
  2021-06-16  4:02   ` Christoph Hellwig
  2021-06-15 21:21 ` [PATCH v2 4/4] pstore/blk: Fix kerndoc and redundancy on blkdev param Kees Cook
  3 siblings, 1 reply; 10+ messages in thread
From: Kees Cook @ 2021-06-15 21:21 UTC (permalink / raw)
  To: linux-kernel
  Cc: Kees Cook, Christoph Hellwig, Al Viro, gmpy.liaowx,
	Anton Vorontsov, Colin Cross, Tony Luck, Jonathan Corbet,
	Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	linux-doc, linux-mtd, linux-block, linux-fsdevel

Information was redundant between struct pstore_zone_info and struct
pstore_device_info. Use struct pstore_zone_info, with member name "zone".

Additionally untangle the logic for the "best effort" block device
instance.

Signed-off-by: Kees Cook <keescook@chromium.org>
---
 drivers/mtd/mtdpstore.c    |  10 +--
 fs/pstore/blk.c            | 141 ++++++++++++++++++-------------------
 include/linux/pstore_blk.h |  27 +------
 3 files changed, 75 insertions(+), 103 deletions(-)

diff --git a/drivers/mtd/mtdpstore.c b/drivers/mtd/mtdpstore.c
index a3ae8778f6a9..e13d42c0acb0 100644
--- a/drivers/mtd/mtdpstore.c
+++ b/drivers/mtd/mtdpstore.c
@@ -423,13 +423,13 @@ static void mtdpstore_notify_add(struct mtd_info *mtd)
 	longcnt = BITS_TO_LONGS(div_u64(mtd->size, mtd->erasesize));
 	cxt->badmap = kcalloc(longcnt, sizeof(long), GFP_KERNEL);
 
-	cxt->dev.total_size = mtd->size;
 	/* just support dmesg right now */
 	cxt->dev.flags = PSTORE_FLAGS_DMESG;
-	cxt->dev.read = mtdpstore_read;
-	cxt->dev.write = mtdpstore_write;
-	cxt->dev.erase = mtdpstore_erase;
-	cxt->dev.panic_write = mtdpstore_panic_write;
+	cxt->dev.zone.read = mtdpstore_read;
+	cxt->dev.zone.write = mtdpstore_write;
+	cxt->dev.zone.erase = mtdpstore_erase;
+	cxt->dev.zone.panic_write = mtdpstore_panic_write;
+	cxt->dev.zone.total_size = mtd->size;
 
 	ret = register_pstore_device(&cxt->dev);
 	if (ret) {
diff --git a/fs/pstore/blk.c b/fs/pstore/blk.c
index 8f5bd656cc2d..e5ed118683b1 100644
--- a/fs/pstore/blk.c
+++ b/fs/pstore/blk.c
@@ -92,7 +92,7 @@ MODULE_PARM_DESC(blkdev, "block device for pstore storage");
  */
 static DEFINE_MUTEX(pstore_blk_lock);
 static struct file *psblk_file;
-static struct pstore_zone_info *pstore_zone_info;
+static struct pstore_device_info *pstore_device_info;
 
 #define check_size(name, alignsize) ({				\
 	long _##name_ = (name);					\
@@ -105,68 +105,60 @@ static struct pstore_zone_info *pstore_zone_info;
 	_##name_;						\
 })
 
+#define verify_size(name, alignsize, enabled) {				\
+		long _##name_;						\
+		if (enabled)						\
+			_##name_ = check_size(name, alignsize);		\
+		else							\
+			_##name_ = 0;					\
+		/* synchronize visible module parameters to result. */	\
+		name = _##name_ / 1024;					\
+		dev->zone.name = _##name_;				\
+	}
+
 static int __register_pstore_device(struct pstore_device_info *dev)
 {
 	int ret;
 
 	lockdep_assert_held(&pstore_blk_lock);
 
-	if (!dev || !dev->total_size || !dev->read || !dev->write) {
+	if (!dev || !dev->zone.total_size || !dev->zone.read || !dev->zone.write) {
 		if (!dev)
-			pr_err("NULL device info\n");
+			pr_err("NULL pstore_device_info\n");
 		else {
-			if (!dev->total_size)
+			if (!dev->zone.total_size)
 				pr_err("zero sized device\n");
-			if (!dev->read)
+			if (!dev->zone.read)
 				pr_err("no read handler for device\n");
-			if (!dev->write)
+			if (!dev->zone.write)
 				pr_err("no write handler for device\n");
 		}
 		return -EINVAL;
 	}
 
 	/* someone already registered before */
-	if (pstore_zone_info)
+	if (pstore_device_info)
 		return -EBUSY;
 
-	pstore_zone_info = kzalloc(sizeof(struct pstore_zone_info), GFP_KERNEL);
-	if (!pstore_zone_info)
-		return -ENOMEM;
-
 	/* zero means not limit on which backends to attempt to store. */
 	if (!dev->flags)
 		dev->flags = UINT_MAX;
 
-#define verify_size(name, alignsize, enabled) {				\
-		long _##name_;						\
-		if (enabled)						\
-			_##name_ = check_size(name, alignsize);		\
-		else							\
-			_##name_ = 0;					\
-		name = _##name_ / 1024;					\
-		pstore_zone_info->name = _##name_;			\
-	}
-
+	/* Copy in module parameters. */
 	verify_size(kmsg_size, 4096, dev->flags & PSTORE_FLAGS_DMESG);
 	verify_size(pmsg_size, 4096, dev->flags & PSTORE_FLAGS_PMSG);
 	verify_size(console_size, 4096, dev->flags & PSTORE_FLAGS_CONSOLE);
 	verify_size(ftrace_size, 4096, dev->flags & PSTORE_FLAGS_FTRACE);
-#undef verify_size
-
-	pstore_zone_info->total_size = dev->total_size;
-	pstore_zone_info->max_reason = max_reason;
-	pstore_zone_info->read = dev->read;
-	pstore_zone_info->write = dev->write;
-	pstore_zone_info->erase = dev->erase;
-	pstore_zone_info->panic_write = dev->panic_write;
-	pstore_zone_info->name = KBUILD_MODNAME;
-	pstore_zone_info->owner = THIS_MODULE;
-
-	ret = register_pstore_zone(pstore_zone_info);
-	if (ret) {
-		kfree(pstore_zone_info);
-		pstore_zone_info = NULL;
-	}
+	dev->zone.max_reason = max_reason;
+
+	/* Initialize required zone ownership details. */
+	dev->zone.name = KBUILD_MODNAME;
+	dev->zone.owner = THIS_MODULE;
+
+	ret = register_pstore_zone(&dev->zone);
+	if (ret == 0)
+		pstore_device_info = dev;
+
 	return ret;
 }
 /**
@@ -193,10 +185,9 @@ EXPORT_SYMBOL_GPL(register_pstore_device);
 static void __unregister_pstore_device(struct pstore_device_info *dev)
 {
 	lockdep_assert_held(&pstore_blk_lock);
-	if (pstore_zone_info && pstore_zone_info->read == dev->read) {
-		unregister_pstore_zone(pstore_zone_info);
-		kfree(pstore_zone_info);
-		pstore_zone_info = NULL;
+	if (pstore_device_info && pstore_device_info == dev) {
+		unregister_pstore_zone(&dev->zone);
+		pstore_device_info = NULL;
 	}
 }
 
@@ -230,12 +221,9 @@ static ssize_t psblk_generic_blk_write(const char *buf, size_t bytes,
 /*
  * This takes its configuration only from the module parameters now.
  */
-static int __register_pstore_blk(const char *devpath)
+static int __register_pstore_blk(struct pstore_device_info *dev,
+				 const char *devpath)
 {
-	struct pstore_device_info dev = {
-		.read = psblk_generic_blk_read,
-		.write = psblk_generic_blk_write,
-	};
 	int ret = -ENODEV;
 
 	lockdep_assert_held(&pstore_blk_lock);
@@ -252,9 +240,9 @@ static int __register_pstore_blk(const char *devpath)
 		goto err_fput;
 	}
 
-	dev.total_size = i_size_read(I_BDEV(psblk_file->f_mapping->host)->bd_inode);
+	dev->zone.total_size = i_size_read(I_BDEV(psblk_file->f_mapping->host)->bd_inode);
 
-	ret = __register_pstore_device(&dev);
+	ret = __register_pstore_device(dev);
 	if (ret)
 		goto err_fput;
 
@@ -268,18 +256,6 @@ static int __register_pstore_blk(const char *devpath)
 	return ret;
 }
 
-static void __unregister_pstore_blk(struct file *device)
-{
-	struct pstore_device_info dev = { .read = psblk_generic_blk_read };
-
-	lockdep_assert_held(&pstore_blk_lock);
-	if (psblk_file && psblk_file == device) {
-		__unregister_pstore_device(&dev);
-		fput(psblk_file);
-		psblk_file = NULL;
-	}
-}
-
 /* get information of pstore/blk */
 int pstore_blk_get_config(struct pstore_blk_config *info)
 {
@@ -329,13 +305,27 @@ static int __init pstore_blk_init(void)
 	int ret = 0;
 
 	mutex_lock(&pstore_blk_lock);
-	if (!pstore_zone_info && best_effort && blkdev[0]) {
-		ret = __register_pstore_blk(early_boot_devpath(blkdev));
-		if (ret == 0 && pstore_zone_info)
-			pr_info("attached %s:%s (%zu) (no dedicated panic_write!)\n",
-				pstore_zone_info->name, blkdev,
-				pstore_zone_info->total_size);
+	if (!pstore_device_info && best_effort && blkdev[0]) {
+		struct pstore_device_info *best_effort_dev;
+
+		best_effort_dev = kzalloc(sizeof(*best_effort_dev), GFP_KERNEL);
+		if (!best_effort) {
+			ret = -ENOMEM;
+			goto unlock;
+		}
+		best_effort_dev->zone.read = psblk_generic_blk_read;
+		best_effort_dev->zone.write = psblk_generic_blk_write;
+
+		ret = __register_pstore_blk(best_effort_dev,
+					    early_boot_devpath(blkdev));
+		if (ret)
+			kfree(best_effort_dev);
+		else
+			pr_info("attached %s (%zu) (no dedicated panic_write!)\n",
+				blkdev, best_effort_dev->zone.total_size);
 	}
+
+unlock:
 	mutex_unlock(&pstore_blk_lock);
 
 	return ret;
@@ -345,15 +335,18 @@ late_initcall(pstore_blk_init);
 static void __exit pstore_blk_exit(void)
 {
 	mutex_lock(&pstore_blk_lock);
-	if (psblk_file)
-		__unregister_pstore_blk(psblk_file);
-	else {
-		struct pstore_device_info dev = { };
-
-		if (pstore_zone_info)
-			dev.read = pstore_zone_info->read;
-		__unregister_pstore_device(&dev);
+	/* Unregister and free the best_effort device. */
+	if (psblk_file) {
+		struct pstore_device_info *dev = pstore_device_info;
+
+		__unregister_pstore_device(dev);
+		kfree(dev);
+		fput(psblk_file);
+		psblk_file = NULL;
 	}
+	/* If we've been asked to unload, unregister any registered device. */
+	if (pstore_device_info)
+		__unregister_pstore_device(pstore_device_info);
 	mutex_unlock(&pstore_blk_lock);
 }
 module_exit(pstore_blk_exit);
diff --git a/include/linux/pstore_blk.h b/include/linux/pstore_blk.h
index 99564f93d774..924ca07aafbd 100644
--- a/include/linux/pstore_blk.h
+++ b/include/linux/pstore_blk.h
@@ -10,36 +10,15 @@
 /**
  * struct pstore_device_info - back-end pstore/blk driver structure.
  *
- * @total_size: The total size in bytes pstore/blk can use. It must be greater
- *		than 4096 and be multiple of 4096.
  * @flags:	Refer to macro starting with PSTORE_FLAGS defined in
  *		linux/pstore.h. It means what front-ends this device support.
  *		Zero means all backends for compatible.
- * @read:	The general read operation. Both of the function parameters
- *		@size and @offset are relative value to bock device (not the
- *		whole disk).
- *		On success, the number of bytes should be returned, others
- *		means error.
- * @write:	The same as @read, but the following error number:
- *		-EBUSY means try to write again later.
- *		-ENOMSG means to try next zone.
- * @erase:	The general erase operation for device with special removing
- *		job. Both of the function parameters @size and @offset are
- *		relative value to storage.
- *		Return 0 on success and others on failure.
- * @panic_write:The write operation only used for panic case. It's optional
- *		if you do not care panic log. The parameters are relative
- *		value to storage.
- *		On success, the number of bytes should be returned, others
- *		excluding -ENOMSG mean error. -ENOMSG means to try next zone.
+ * @zone:	The struct pstore_zone_info details.
+ *
  */
 struct pstore_device_info {
-	unsigned long total_size;
 	unsigned int flags;
-	pstore_zone_read_op read;
-	pstore_zone_write_op write;
-	pstore_zone_erase_op erase;
-	pstore_zone_write_op panic_write;
+	struct pstore_zone_info zone;
 };
 
 int  register_pstore_device(struct pstore_device_info *dev);
-- 
2.25.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 4/4] pstore/blk: Fix kerndoc and redundancy on blkdev param
  2021-06-15 21:21 [PATCH v2 0/4] Include zone in pstore_device_info Kees Cook
                   ` (2 preceding siblings ...)
  2021-06-15 21:21 ` [PATCH v2 3/4] pstore/blk: Include zone in pstore_device_info Kees Cook
@ 2021-06-15 21:21 ` Kees Cook
  2021-06-16  3:53   ` Christoph Hellwig
  3 siblings, 1 reply; 10+ messages in thread
From: Kees Cook @ 2021-06-15 21:21 UTC (permalink / raw)
  To: linux-kernel
  Cc: Kees Cook, Christoph Hellwig, Al Viro, gmpy.liaowx,
	Anton Vorontsov, Colin Cross, Tony Luck, Jonathan Corbet,
	Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	linux-doc, linux-mtd, linux-block, linux-fsdevel

Remove redundant details of blkdev and fix up resulting kerndoc.

Signed-off-by: Kees Cook <keescook@chromium.org>
---
 Documentation/admin-guide/pstore-blk.rst | 14 +++++++-------
 fs/pstore/blk.c                          | 24 +-----------------------
 2 files changed, 8 insertions(+), 30 deletions(-)

diff --git a/Documentation/admin-guide/pstore-blk.rst b/Documentation/admin-guide/pstore-blk.rst
index 49d8149f8d32..2d22ead9520e 100644
--- a/Documentation/admin-guide/pstore-blk.rst
+++ b/Documentation/admin-guide/pstore-blk.rst
@@ -45,15 +45,18 @@ blkdev
 The block device to use. Most of the time, it is a partition of block device.
 It's required for pstore/blk. It is also used for MTD device.
 
-It accepts the following variants for block device:
+When pstore/blk is built as a module, "blkdev" accepts the following variants:
 
-1. <hex_major><hex_minor> device number in hexadecimal represents itself; no
-   leading 0x, for example b302.
-#. /dev/<disk_name> represents the device number of disk
+1. /dev/<disk_name> represents the device number of disk
 #. /dev/<disk_name><decimal> represents the device number of partition - device
    number of disk plus the partition number
 #. /dev/<disk_name>p<decimal> - same as the above; this form is used when disk
    name of partitioned disk ends with a digit.
+
+When pstore/blk is built into the kernel, "blkdev" accepts the following variants:
+
+#. <hex_major><hex_minor> device number in hexadecimal representation,
+   with no leading 0x, for example b302.
 #. PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF represents the unique id of
    a partition if the partition table provides it. The UUID may be either an
    EFI/GPT UUID, or refer to an MSDOS partition using the format SSSSSSSS-PP,
@@ -227,8 +230,5 @@ For developer reference, here are all the important structures and APIs:
 .. kernel-doc:: include/linux/pstore_zone.h
    :internal:
 
-.. kernel-doc:: fs/pstore/blk.c
-   :internal:
-
 .. kernel-doc:: include/linux/pstore_blk.h
    :internal:
diff --git a/fs/pstore/blk.c b/fs/pstore/blk.c
index e5ed118683b1..ccfb11ee4d50 100644
--- a/fs/pstore/blk.c
+++ b/fs/pstore/blk.c
@@ -58,29 +58,7 @@ MODULE_PARM_DESC(best_effort, "use best effort to write (i.e. do not require sto
 
 /*
  * blkdev - the block device to use for pstore storage
- *
- * Usually, this will be a partition of a block device.
- *
- * blkdev accepts the following variants, when built as a module:
- * 1) /dev/<disk_name> represents the device number of disk
- * 2) /dev/<disk_name><decimal> represents the device number
- *    of partition - device number of disk plus the partition number
- * 3) /dev/<disk_name>p<decimal> - same as the above, that form is
- *    used when disk name of partitioned disk ends on a digit.
- *
- * blkdev accepts the following variants when built into the kernel:
- * 1) <hex_major><hex_minor> device number in hexadecimal representation,
- *    with no leading 0x, for example b302.
- * 2) PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF representing the
- *    unique id of a partition if the partition table provides it.
- *    The UUID may be either an EFI/GPT UUID, or refer to an MSDOS
- *    partition using the format SSSSSSSS-PP, where SSSSSSSS is a zero-
- *    filled hex representation of the 32-bit "NT disk signature", and PP
- *    is a zero-filled hex representation of the 1-based partition number.
- * 3) PARTUUID=<UUID>/PARTNROFF=<int> to select a partition in relation to
- *    a partition with a known unique id.
- * 4) <major>:<minor> major and minor number of the device separated by
- *    a colon.
+ * See Documentation/admin-guide/pstore-blk.rst for details.
  */
 static char blkdev[80] = CONFIG_PSTORE_BLK_BLKDEV;
 module_param_string(blkdev, blkdev, 80, 0400);
-- 
2.25.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 1/4] pstore/blk: Improve failure reporting
  2021-06-15 21:21 ` [PATCH v2 1/4] pstore/blk: Improve failure reporting Kees Cook
@ 2021-06-16  3:51   ` Christoph Hellwig
  0 siblings, 0 replies; 10+ messages in thread
From: Christoph Hellwig @ 2021-06-16  3:51 UTC (permalink / raw)
  To: Kees Cook
  Cc: linux-kernel, Christoph Hellwig, Al Viro, gmpy.liaowx,
	Anton Vorontsov, Colin Cross, Tony Luck, Jonathan Corbet,
	Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	linux-doc, linux-mtd, linux-block, linux-fsdevel

On Tue, Jun 15, 2021 at 02:21:18PM -0700, Kees Cook wrote:
> -	if (!dev || !dev->total_size || !dev->read || !dev->write)
> +	if (!dev || !dev->total_size || !dev->read || !dev->write) {
> +		if (!dev)
> +			pr_err("NULL device info\n");
> +		else {
> +			if (!dev->total_size)
> +				pr_err("zero sized device\n");
> +			if (!dev->read)
> +				pr_err("no read handler for device\n");
> +			if (!dev->write)
> +				pr_err("no write handler for device\n");
> +		}
>  		return -EINVAL;
> +	}

I still find this style of checks pretty strange..

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/4] pstore/blk: Use the normal block device I/O path
  2021-06-15 21:21 ` [PATCH v2 2/4] pstore/blk: Use the normal block device I/O path Kees Cook
@ 2021-06-16  3:52   ` Christoph Hellwig
  0 siblings, 0 replies; 10+ messages in thread
From: Christoph Hellwig @ 2021-06-16  3:52 UTC (permalink / raw)
  To: Kees Cook
  Cc: linux-kernel, Christoph Hellwig, Al Viro, gmpy.liaowx,
	Anton Vorontsov, Colin Cross, Tony Luck, Jonathan Corbet,
	Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	linux-doc, linux-mtd, linux-block, linux-fsdevel

Looks fine:

Reviewed-by: Christoph Hellwig <hch@lst.de>

(modulo the slightly annoying overly long lines)

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 4/4] pstore/blk: Fix kerndoc and redundancy on blkdev param
  2021-06-15 21:21 ` [PATCH v2 4/4] pstore/blk: Fix kerndoc and redundancy on blkdev param Kees Cook
@ 2021-06-16  3:53   ` Christoph Hellwig
  0 siblings, 0 replies; 10+ messages in thread
From: Christoph Hellwig @ 2021-06-16  3:53 UTC (permalink / raw)
  To: Kees Cook
  Cc: linux-kernel, Christoph Hellwig, Al Viro, gmpy.liaowx,
	Anton Vorontsov, Colin Cross, Tony Luck, Jonathan Corbet,
	Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	linux-doc, linux-mtd, linux-block, linux-fsdevel

On Tue, Jun 15, 2021 at 02:21:21PM -0700, Kees Cook wrote:
> Remove redundant details of blkdev and fix up resulting kerndoc.

Looks good,

Reviewed-by: Christoph Hellwig <hch@lst.de>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 3/4] pstore/blk: Include zone in pstore_device_info
  2021-06-15 21:21 ` [PATCH v2 3/4] pstore/blk: Include zone in pstore_device_info Kees Cook
@ 2021-06-16  4:02   ` Christoph Hellwig
  2021-06-16 14:41     ` Kees Cook
  0 siblings, 1 reply; 10+ messages in thread
From: Christoph Hellwig @ 2021-06-16  4:02 UTC (permalink / raw)
  To: Kees Cook
  Cc: linux-kernel, Christoph Hellwig, Al Viro, gmpy.liaowx,
	Anton Vorontsov, Colin Cross, Tony Luck, Jonathan Corbet,
	Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	linux-doc, linux-mtd, linux-block, linux-fsdevel

> +#define verify_size(name, alignsize, enabled) {				\
> +		long _##name_;						\
> +		if (enabled)						\
> +			_##name_ = check_size(name, alignsize);		\
> +		else							\
> +			_##name_ = 0;					\
> +		/* synchronize visible module parameters to result. */	\
> +		name = _##name_ / 1024;					\
> +		dev->zone.name = _##name_;				\
> +	}

The formatting here looks weird between the two-tab indent and the
opening brace on the macro definition line.

> -	if (!dev || !dev->total_size || !dev->read || !dev->write) {
> +	if (!dev || !dev->zone.total_size || !dev->zone.read || !dev->zone.write) {
>  		if (!dev)
> -			pr_err("NULL device info\n");
> +			pr_err("NULL pstore_device_info\n");
>  		else {
> -			if (!dev->total_size)
> +			if (!dev->zone.total_size)
>  				pr_err("zero sized device\n");
> -			if (!dev->read)
> +			if (!dev->zone.read)
>  				pr_err("no read handler for device\n");
> -			if (!dev->write)
> +			if (!dev->zone.write)
>  				pr_err("no write handler for device\n");
>  		}

This still looks odd to me.  Why not the somewhat more verbose but
much more obvious:

	if (!dev) {
		pr_err("NULL pstore_device_info\n");
		return -EINVAL;
	}
	if (!dev->zone.total_size) {
		pr_err("zero sized device\n");
		return -EINVAL;
	}
	...
		

> -	dev.total_size = i_size_read(I_BDEV(psblk_file->f_mapping->host)->bd_inode);
> +	dev->zone.total_size = i_size_read(I_BDEV(psblk_file->f_mapping->host)->bd_inode);

This is starting to be unreadable long.  A local variable for the inode
might be nice, as that can also be used in the ISBLK check above.

> +	if (!pstore_device_info && best_effort && blkdev[0]) {
> +		struct pstore_device_info *best_effort_dev;
> +
> +		best_effort_dev = kzalloc(sizeof(*best_effort_dev), GFP_KERNEL);
> +		if (!best_effort) {
> +			ret = -ENOMEM;
> +			goto unlock;
> +		}
> +		best_effort_dev->zone.read = psblk_generic_blk_read;
> +		best_effort_dev->zone.write = psblk_generic_blk_write;
> +
> +		ret = __register_pstore_blk(best_effort_dev,
> +					    early_boot_devpath(blkdev));
> +		if (ret)
> +			kfree(best_effort_dev);
> +		else
> +			pr_info("attached %s (%zu) (no dedicated panic_write!)\n",
> +				blkdev, best_effort_dev->zone.total_size);

Maybe split this into a little helper?

> +	/* Unregister and free the best_effort device. */
> +	if (psblk_file) {
> +		struct pstore_device_info *dev = pstore_device_info;
> +
> +		__unregister_pstore_device(dev);
> +		kfree(dev);
> +		fput(psblk_file);
> +		psblk_file = NULL;
>  	}

Same.

> +	/* If we've been asked to unload, unregister any registered device. */
> +	if (pstore_device_info)
> +		__unregister_pstore_device(pstore_device_info);

Won't this double unregister pstore_device_info?

>  struct pstore_device_info {
> -	unsigned long total_size;
>  	unsigned int flags;
> -	pstore_zone_read_op read;
> -	pstore_zone_write_op write;
> -	pstore_zone_erase_op erase;
> -	pstore_zone_write_op panic_write;
> +	struct pstore_zone_info zone;
>  };

Given that flags is only used inside of __register_pstore_device
why not kill this struct and just pass it explicitly?

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 3/4] pstore/blk: Include zone in pstore_device_info
  2021-06-16  4:02   ` Christoph Hellwig
@ 2021-06-16 14:41     ` Kees Cook
  0 siblings, 0 replies; 10+ messages in thread
From: Kees Cook @ 2021-06-16 14:41 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-kernel, Al Viro, gmpy.liaowx, Anton Vorontsov, Colin Cross,
	Tony Luck, Jonathan Corbet, Miquel Raynal, Richard Weinberger,
	Vignesh Raghavendra, linux-doc, linux-mtd, linux-block,
	linux-fsdevel

On Wed, Jun 16, 2021 at 06:02:47AM +0200, Christoph Hellwig wrote:
> > +#define verify_size(name, alignsize, enabled) {				\
> > +		long _##name_;						\
> > +		if (enabled)						\
> > +			_##name_ = check_size(name, alignsize);		\
> > +		else							\
> > +			_##name_ = 0;					\
> > +		/* synchronize visible module parameters to result. */	\
> > +		name = _##name_ / 1024;					\
> > +		dev->zone.name = _##name_;				\
> > +	}
> 
> The formatting here looks weird between the two-tab indent and the
> opening brace on the macro definition line.

I can adjust that, sure.

> 
> > -	if (!dev || !dev->total_size || !dev->read || !dev->write) {
> > +	if (!dev || !dev->zone.total_size || !dev->zone.read || !dev->zone.write) {
> >  		if (!dev)
> > -			pr_err("NULL device info\n");
> > +			pr_err("NULL pstore_device_info\n");
> >  		else {
> > -			if (!dev->total_size)
> > +			if (!dev->zone.total_size)
> >  				pr_err("zero sized device\n");
> > -			if (!dev->read)
> > +			if (!dev->zone.read)
> >  				pr_err("no read handler for device\n");
> > -			if (!dev->write)
> > +			if (!dev->zone.write)
> >  				pr_err("no write handler for device\n");
> >  		}
> 
> This still looks odd to me.  Why not the somewhat more verbose but
> much more obvious:
> 
> 	if (!dev) {
> 		pr_err("NULL pstore_device_info\n");
> 		return -EINVAL;
> 	}
> 	if (!dev->zone.total_size) {
> 		pr_err("zero sized device\n");
> 		return -EINVAL;
> 	}
> 	...

Will do.

> > -	dev.total_size = i_size_read(I_BDEV(psblk_file->f_mapping->host)->bd_inode);
> > +	dev->zone.total_size = i_size_read(I_BDEV(psblk_file->f_mapping->host)->bd_inode);
> 
> This is starting to be unreadable long.  A local variable for the inode
> might be nice, as that can also be used in the ISBLK check above.

Fair enough; will change.

> > +	if (!pstore_device_info && best_effort && blkdev[0]) {
> > +		struct pstore_device_info *best_effort_dev;
> > +
> > +		best_effort_dev = kzalloc(sizeof(*best_effort_dev), GFP_KERNEL);
> > +		if (!best_effort) {
> > +			ret = -ENOMEM;
> > +			goto unlock;
> > +		}
> > +		best_effort_dev->zone.read = psblk_generic_blk_read;
> > +		best_effort_dev->zone.write = psblk_generic_blk_write;
> > +
> > +		ret = __register_pstore_blk(best_effort_dev,
> > +					    early_boot_devpath(blkdev));
> > +		if (ret)
> > +			kfree(best_effort_dev);
> > +		else
> > +			pr_info("attached %s (%zu) (no dedicated panic_write!)\n",
> > +				blkdev, best_effort_dev->zone.total_size);
> 
> Maybe split this into a little helper?
> 
> > +	/* Unregister and free the best_effort device. */
> > +	if (psblk_file) {
> > +		struct pstore_device_info *dev = pstore_device_info;
> > +
> > +		__unregister_pstore_device(dev);
> > +		kfree(dev);
> > +		fput(psblk_file);
> > +		psblk_file = NULL;
> >  	}
> 
> Same.

I guess? I don't feel strongly one way or another.

> 
> > +	/* If we've been asked to unload, unregister any registered device. */
> > +	if (pstore_device_info)
> > +		__unregister_pstore_device(pstore_device_info);
> 
> Won't this double unregister pstore_device_info?

No, __unregister_pstore_device() will NULL pstore_device_info.

> 
> >  struct pstore_device_info {
> > -	unsigned long total_size;
> >  	unsigned int flags;
> > -	pstore_zone_read_op read;
> > -	pstore_zone_write_op write;
> > -	pstore_zone_erase_op erase;
> > -	pstore_zone_write_op panic_write;
> > +	struct pstore_zone_info zone;
> >  };
> 
> Given that flags is only used inside of __register_pstore_device
> why not kill this struct and just pass it explicitly?

Because of the mess pstore's internal APIs used to be. :) It's likely
other things will get added here in the future, and I don't want to
have to repeat the kind of argument passing games that used to exist in
this code.

-- 
Kees Cook

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2021-06-16 14:42 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-15 21:21 [PATCH v2 0/4] Include zone in pstore_device_info Kees Cook
2021-06-15 21:21 ` [PATCH v2 1/4] pstore/blk: Improve failure reporting Kees Cook
2021-06-16  3:51   ` Christoph Hellwig
2021-06-15 21:21 ` [PATCH v2 2/4] pstore/blk: Use the normal block device I/O path Kees Cook
2021-06-16  3:52   ` Christoph Hellwig
2021-06-15 21:21 ` [PATCH v2 3/4] pstore/blk: Include zone in pstore_device_info Kees Cook
2021-06-16  4:02   ` Christoph Hellwig
2021-06-16 14:41     ` Kees Cook
2021-06-15 21:21 ` [PATCH v2 4/4] pstore/blk: Fix kerndoc and redundancy on blkdev param Kees Cook
2021-06-16  3:53   ` Christoph Hellwig

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).