* [PATCH blktests V2] tests/srp: fix module loading issue during srp tests
@ 2021-10-18 2:40 Yi Zhang
2021-10-19 19:43 ` Omar Sandoval
0 siblings, 1 reply; 3+ messages in thread
From: Yi Zhang @ 2021-10-18 2:40 UTC (permalink / raw)
To: osandov, bvanassche; +Cc: linux-block
The ib_isert/ib_srpt modules will be automatically loaded after the first
time rdma_rxe/siw setup, which will lead srp tests fail.
$ modprobe rdma_rxe
$ echo eno1 >/sys/module/rdma_rxe/parameters/add
$ lsmod | grep -E "ib_srpt|iscsi_target_mod|ib_isert"
ib_srpt 167936 0
ib_isert 139264 0
iscsi_target_mod 843776 1 ib_isert
target_core_mod 1069056 3 iscsi_target_mod,ib_srpt,ib_isert
rdma_cm 315392 5 rpcrdma,ib_srpt,ib_iser,ib_isert,rdma_ucm
ib_cm 344064 2 rdma_cm,ib_srpt
ib_core 1101824 10 rdma_cm,rdma_rxe,rpcrdma,ib_srpt,iw_cm,ib_iser,ib_isert,rdma_ucm,ib_uverbs,ib_cm
$ ./check srp/001
srp/001 (Create and remove LUNs) [failed]
runtime ... 3.675s
--- tests/srp/001.out 2021-10-13 01:18:50.846740093 -0400
+++ /root/blktests/results/nodev/srp/001.out.bad 2021-10-14 03:24:18.593852208 -0400
@@ -1,3 +1 @@
-Configured SRP target driver
-count_luns(): 3 <> 3
-Passed
+insmod: ERROR: could not insert module /lib/modules/5.15.0-rc5.fix+/kernel/drivers/infiniband/ulp/srpt/ib_srpt.ko: File exists
modprobe: FATAL: Module iscsi_target_mod is in use.
Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
---
tests/srp/rc | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tests/srp/rc b/tests/srp/rc
index 7239d87..16638a4 100755
--- a/tests/srp/rc
+++ b/tests/srp/rc
@@ -497,7 +497,8 @@ start_lio_srpt() {
if modinfo ib_srpt | grep -q '^parm:[[:blank:]]*rdma_cm_port:'; then
opts+=("rdma_cm_port=${srp_rdma_cm_port}")
fi
- insmod "/lib/modules/$(uname -r)/kernel/drivers/infiniband/ulp/srpt/ib_srpt."* "${opts[@]}" || return $?
+ unload_module ib_srpt &&
+ insmod "/lib/modules/$(uname -r)/kernel/drivers/infiniband/ulp/srpt/ib_srpt."* "${opts[@]}" || return $?
i=0
for r in "${vdev_path[@]}"; do
if [ -b "$(readlink -f "$r")" ]; then
@@ -554,7 +555,7 @@ stop_lio_srpt() {
rmdir /sys/kernel/config/target/*/* >&/dev/null
rmdir /sys/kernel/config/target/* >&/dev/null
- for m in ib_srpt iscsi_target_mod target_core_pscsi target_core_iblock \
+ for m in ib_srpt ib_isert iscsi_target_mod target_core_pscsi target_core_iblock \
target_core_file target_core_stgt target_core_user \
target_core_mod
do
--
2.21.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH blktests V2] tests/srp: fix module loading issue during srp tests
2021-10-18 2:40 [PATCH blktests V2] tests/srp: fix module loading issue during srp tests Yi Zhang
@ 2021-10-19 19:43 ` Omar Sandoval
2021-10-24 12:44 ` Yi Zhang
0 siblings, 1 reply; 3+ messages in thread
From: Omar Sandoval @ 2021-10-19 19:43 UTC (permalink / raw)
To: Yi Zhang; +Cc: bvanassche, linux-block
On Mon, Oct 18, 2021 at 10:40:07AM +0800, Yi Zhang wrote:
> The ib_isert/ib_srpt modules will be automatically loaded after the first
> time rdma_rxe/siw setup, which will lead srp tests fail.
>
> $ modprobe rdma_rxe
> $ echo eno1 >/sys/module/rdma_rxe/parameters/add
> $ lsmod | grep -E "ib_srpt|iscsi_target_mod|ib_isert"
> ib_srpt 167936 0
> ib_isert 139264 0
> iscsi_target_mod 843776 1 ib_isert
> target_core_mod 1069056 3 iscsi_target_mod,ib_srpt,ib_isert
> rdma_cm 315392 5 rpcrdma,ib_srpt,ib_iser,ib_isert,rdma_ucm
> ib_cm 344064 2 rdma_cm,ib_srpt
> ib_core 1101824 10 rdma_cm,rdma_rxe,rpcrdma,ib_srpt,iw_cm,ib_iser,ib_isert,rdma_ucm,ib_uverbs,ib_cm
>
> $ ./check srp/001
> srp/001 (Create and remove LUNs) [failed]
> runtime ... 3.675s
> --- tests/srp/001.out 2021-10-13 01:18:50.846740093 -0400
> +++ /root/blktests/results/nodev/srp/001.out.bad 2021-10-14 03:24:18.593852208 -0400
> @@ -1,3 +1 @@
> -Configured SRP target driver
> -count_luns(): 3 <> 3
> -Passed
> +insmod: ERROR: could not insert module /lib/modules/5.15.0-rc5.fix+/kernel/drivers/infiniband/ulp/srpt/ib_srpt.ko: File exists
> modprobe: FATAL: Module iscsi_target_mod is in use.
>
> Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
> ---
> tests/srp/rc | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/tests/srp/rc b/tests/srp/rc
> index 7239d87..16638a4 100755
> --- a/tests/srp/rc
> +++ b/tests/srp/rc
> @@ -497,7 +497,8 @@ start_lio_srpt() {
> if modinfo ib_srpt | grep -q '^parm:[[:blank:]]*rdma_cm_port:'; then
> opts+=("rdma_cm_port=${srp_rdma_cm_port}")
> fi
> - insmod "/lib/modules/$(uname -r)/kernel/drivers/infiniband/ulp/srpt/ib_srpt."* "${opts[@]}" || return $?
> + unload_module ib_srpt &&
> + insmod "/lib/modules/$(uname -r)/kernel/drivers/infiniband/ulp/srpt/ib_srpt."* "${opts[@]}" || return $?
While we're here, can this just be modprobe ib_srpt instead of insmod?
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH blktests V2] tests/srp: fix module loading issue during srp tests
2021-10-19 19:43 ` Omar Sandoval
@ 2021-10-24 12:44 ` Yi Zhang
0 siblings, 0 replies; 3+ messages in thread
From: Yi Zhang @ 2021-10-24 12:44 UTC (permalink / raw)
To: Omar Sandoval; +Cc: Bart Van Assche, linux-block
On Wed, Oct 20, 2021 at 3:43 AM Omar Sandoval <osandov@osandov.com> wrote:
>
> On Mon, Oct 18, 2021 at 10:40:07AM +0800, Yi Zhang wrote:
> > The ib_isert/ib_srpt modules will be automatically loaded after the first
> > time rdma_rxe/siw setup, which will lead srp tests fail.
> >
> > $ modprobe rdma_rxe
> > $ echo eno1 >/sys/module/rdma_rxe/parameters/add
> > $ lsmod | grep -E "ib_srpt|iscsi_target_mod|ib_isert"
> > ib_srpt 167936 0
> > ib_isert 139264 0
> > iscsi_target_mod 843776 1 ib_isert
> > target_core_mod 1069056 3 iscsi_target_mod,ib_srpt,ib_isert
> > rdma_cm 315392 5 rpcrdma,ib_srpt,ib_iser,ib_isert,rdma_ucm
> > ib_cm 344064 2 rdma_cm,ib_srpt
> > ib_core 1101824 10 rdma_cm,rdma_rxe,rpcrdma,ib_srpt,iw_cm,ib_iser,ib_isert,rdma_ucm,ib_uverbs,ib_cm
> >
> > $ ./check srp/001
> > srp/001 (Create and remove LUNs) [failed]
> > runtime ... 3.675s
> > --- tests/srp/001.out 2021-10-13 01:18:50.846740093 -0400
> > +++ /root/blktests/results/nodev/srp/001.out.bad 2021-10-14 03:24:18.593852208 -0400
> > @@ -1,3 +1 @@
> > -Configured SRP target driver
> > -count_luns(): 3 <> 3
> > -Passed
> > +insmod: ERROR: could not insert module /lib/modules/5.15.0-rc5.fix+/kernel/drivers/infiniband/ulp/srpt/ib_srpt.ko: File exists
> > modprobe: FATAL: Module iscsi_target_mod is in use.
> >
> > Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
> > ---
> > tests/srp/rc | 5 +++--
> > 1 file changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/tests/srp/rc b/tests/srp/rc
> > index 7239d87..16638a4 100755
> > --- a/tests/srp/rc
> > +++ b/tests/srp/rc
> > @@ -497,7 +497,8 @@ start_lio_srpt() {
> > if modinfo ib_srpt | grep -q '^parm:[[:blank:]]*rdma_cm_port:'; then
> > opts+=("rdma_cm_port=${srp_rdma_cm_port}")
> > fi
> > - insmod "/lib/modules/$(uname -r)/kernel/drivers/infiniband/ulp/srpt/ib_srpt."* "${opts[@]}" || return $?
> > + unload_module ib_srpt &&
> > + insmod "/lib/modules/$(uname -r)/kernel/drivers/infiniband/ulp/srpt/ib_srpt."* "${opts[@]}" || return $?
>
> While we're here, can this just be modprobe ib_srpt instead of insmod?
>
Yeah, change to modprobe also works here, I've send V3 for it.
--
Best Regards,
Yi Zhang
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-10-24 12:45 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-18 2:40 [PATCH blktests V2] tests/srp: fix module loading issue during srp tests Yi Zhang
2021-10-19 19:43 ` Omar Sandoval
2021-10-24 12:44 ` Yi Zhang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).